Meizu released MX2 firmware to fix the problem

Meizu released MX2 firmware to fix the problem



Meizu has been released the new firmware to fix the noise problem in the Meizu MX2 Android smartphone.

MX2 Experience firmware (Flyme 2.0.4)
Applicable models: MX2 software Size: 177M
MD5: eadd06f35501ae8eae40fdf5b7962c99
SHA1: 149080cb727a16be0f54e5493fae56f1244bb813

Download 1
Download 2

1) Hong Kong version of the the MX2 smartphone firmware upgrade mainland version, may result in the application data is not compatible;
2) Please ensure that the mobile phone battery is greater than 20% before the upgrade;
3) before the upgrade, please back up the phone data through Flyme account;

The upgrade process:
1) Flyme 2.0.4 system firmware copied to the root directory of memory card – Shutdown – plus key upgrade the system by pressing the power and volume;
2) After the success automatically boot into the system;
3) Go to Settings – About phone, view the software version Flyme 2.0.4, description of the firmware upgrade successfully;

Change log:
1) repair the micro-channel noise problem;
2) set the camera’s metering optimized, noise reduction, low-light imaging results, adjust the white balance, optimizing the front camera imaging results;
3) Add the through software calibration gravity sensing function;
4) The new USB quick charge function (in Settings – Accessibility, off by default);
5) to optimize the speed and accuracy of GPS positioning;