Oppo announced the Enco X2 TWS earbuds back in February. The earbuds supported Wireless and Reverse charging. Now the company has launched a wired charging edition of the same earbuds at a lower price. The new wired charging Oppo Enco X2 earbuds come with multi-level noise cancellation, a dual-driver setup, and up to 40hr of Playtime.

The Oppo Enco X2 wired charging earbuds are launched at a price of 799 Yuan ($119) which is 100 Yuan cheaper than the wireless charging version launched earlier. However, the functionalities and features are almost the same, let’s take a look at it.

Oppo Enco X2 wired charging earbuds Specs & Features

The earbuds come with a dual driver setup with an 11mm dynamic driver paired with a 6 mm planar diaphragm driver. The Enco X2 earbuds are jointly developed by Oppo and Dynaudio and have been specially tuned by musical director Joe Hisaishi. The earbuds adopt the new LHDC4.0 technology and have obtained the Hi-Res Audio Wireless Gold Standard certification.

Each earbud has two built-in noise-cancellation microphones and is also equipped with a triple-core noise-cancellation chip with a 50% increase in computing power. The effective noise reduction bandwidth point can reach up to 4kHz. The earbuds come with IP54 water and dust resistance certification and weigh 56.4 grams.

The Oppo earbuds are said to take around 1 hour to charge completely, while the charging case is claimed to take 90 minutes for a full charge. Interestingly, The Enco X2 can provide up to 2 hours of playtime with just 5 minutes of charge time. It can be charged through its USB Type-C port.

For connectivity, the Enco X2 uses Bluetooth 5.2 with LHDC 4.0 transmission protocol which enables it to support a code rate of up to 900kbps. It also comes with support for the usual AAC and SBC audio codecs. For more information you can read our detailed review of Oppo Enco X2 (Wireless Charging). You can also watch the video attached below.

Related:

• Oppo Reno8 series to arrive with the company’s in-house MariSiliconX NPU imaging chip
• Oppo Enco R TWS earbuds announced in China, with semi In-Ear design
• Oppo acquires Sharp’s wireless communication, video coding, & other patents

The post Oppo Enco X2 TWS earbuds Wired Charging Edition launched in China for 799 yuan ($119) appeared first on Gizmochina.

At its Reno6 series launch conference today, OPPO added a new TWS headset in its Enco Free series. The new model called the ENCO Free2 brings in significant upgrades like Active Noise Cancellation up to 42dB and audio tuning by DYNAUDIO. This would make it the second OPPO product after the OPPO ENCO X, to be tuned by the popular Danish audio company.

The OPPO Enco Free2 brings in an in-ear design, unlike the semi-open design of its predecessor. The previous model wasn’t particularly great at noise isolation but with an in-ear design and Active Noise Cancellation (ANC), the Free2 solves this problem. In fact, Noise Cancellation is a big highlight of the new earbuds. OPPO has used a 3-core chip to ensure excellent ANC and claims the earbuds can block noise up to 42dB — one of the highest noise isolation levels for earbuds in its price range. OPPO further adds that the Free2 should offer considerable isolation from wind noise as well.

It’s also good to see that OPPO is bringing DYNAUDIO tuning to the cheaper ‘Free’ series. However, unlike the Enco X which had the DYNAUDIO logo on its charging case, this branding is nowhere to be seen on the Free2’s box or case. That said, with the Danish audio company tuning the earbuds, we can expect better audio than its predecessor.

The Enco Free2 also upgrades its Ingress Protection. The earbuds are IP54 certified, unlike the Enco Free which was just IPX4 rated. So the new earbuds should be safe for your routine beach outings as well.

Other features of the new earbuds include a personalized listening technology which OPPO claims allows customization of the sound according to your hearing levels, transparency mode (same as other earbuds with ANC), 42ms low latency, and remote photo capture, VLOG shoot mode (double click the earbud to activate the shutter). Note that the remote capture mode is currently only available on the new OPPO Reno6 series and will be rolled out to more smartphones in the coming weeks.

The Enco Free2 promises up to 4.5 hours of audio playback with ANC turned on, and up to 6.5 hours without ANC. The charging case will further add a playback time of up to 30 hours.

The new OPPO Enco Free2 will go on sale in China from June 5 for 599 yuan (~$94) which is a good 100 yuan (~$16) cheaper than its predecessor’s launch price back in 2019!

The post OPPO announces Enco Free2 TWS earbuds with a new Design, ANC, & DYNAUDIO Tuning appeared first on Gizmochina.

OPPO, the China-based company known for making smartphones, has been trying to diversify its offering. In line with that, the company is now all set to launch its first Smart TV on 19th October in its home country.

Ahead of the official launch, the company has been revealing some key information about the OPPO Smart TV. In the latest teaser post on Weibo, the company has confirmed its partnership with Dynaudio for the upcoming TV models.

However, it seems that the OPPO TV won’t be the only product from the company to have support for Dynaudio. As per the recent leak, the Chinese brand is working on new TWS earphones dubbed as OPPO Enco X, in partnership with Dynaudio.

An image of the upcoming true wireless earphones from the company has also leaked online, which shows that the logo of Dynaudio will be printed on the back panel of the charging case for the earphones.

EDITOR’S PICK: OnePlus 8T 5G smartphone arrives with Android 11, 120Hz screen, Warp Charge 65, and more!

While the company has not yet confirmed this, some reports indicate that the OPPO Enco X TWS earphones could get launched along with the OPPO Smart TV on 19th October in China. To know for sure, we will have to wait for a few more days.

If the leaks are to be believed, then the company will launch three Smart TV models — R1 55-inch, R1 65-inch, and S1 65-inch. All three of them will reportedly have Quantum Dot Full-Screen display and 120Hz refresh rate.

For those who are unaware, Dynaudio is a Danish audio company known for making loudspeakers for home, studio, and car. Founded in 1977, it claims to offer exceptional sound quality and design in every product. Additionally, the company says that it builds speakers using only their own drivers.

UP NEXT: Samsung Display and LG Display supplies OLED display panels for all the Apple iPhone 12 models

The post OPPO confirms Dynaudio partnership for its upcoming first Smart TV appeared first on Gizmochina.

OPPO has a new pair of TWS earbuds on the way that has been reported will launch as the Enco X. This should be its flagship earbuds and it appears the Chinese manufacturer plans on making it offer the best sound reproduction.

An image of the case of the earbuds has been posted on the web and it shows that OPPO has partnered with Danish loudspeaker maker, Dynaudio. The case which comes in black and has a glossy finish also sports Dynaudio’s logo on the back.

The image was shared on Weibo by Digital Chat Station and according to him, Dynaudio tuned the earbuds and the audio quality should be really impressive. The post also says the Enco X should have a price tag similar to that of the AirPods Pro which costs $250.

OPPO has a launch event on October 19 and there is a high chance that the Enco X TWS earbuds will be unveiled on that day.

UP NEXT: OPPO Smart TV confirmed to launch in China on October 19

The post Leaked OPPO Enco X TWS earbuds case reveals partnership with Dynaudio appeared first on Gizmochina.