Overheating of the original Google Tensor caused the thermal paste over it to burn on a Pixel 6 Pro. The reason for this heating was only a 10-minute phone call, the user reported on Reddit. He has shared a photo of the internals of the device which shows burnt marks over the SoC giving an idea of the amount of heat it generates. Not to mention, the generated heat is beyond the capacity of the heat sink over it to keep it below the safe limit.

Google will design the chips completely in-house and use a more efficient TSMC 3nm process in the Tensor G5 in 2025

The root of the problem seems to be the lower power efficiency. What it means is that for a particular task, the chip consumes relatively more power for a given operation and dissipates more heat as well. Tensor chips are fabricated in Samsung‘s foundry, which is considered to be the main reason for the inefficient nature of Tensor and Samsung’s Exynos chips as well. Although Samsung’s fabrication process has improved in terms of the power efficiency of the end product, the original first Tensor chip is from three years back and things were even more inefficient back then.

Speaking of the improvements in thermal efficiency, some reports still show that the third version of the Google Tensor still throttles during tests more when compared to the competition. The Mountainview-based giant has continued to focus on AI-based tasks for Tensor over the years and dialed back the performance of Tensor G3 to avoid overheating issues.

Considering that Google’s fully home-grown Tensor G5 chip won’t be available until 2025, next year’s Google Pixel 9 series phones will likely still suffer from power efficiency issues to some extent – either a competitive performance with a temperature higher than usual, or a dialed down performance to avoid overheating – neither of which seems to be an ideal solution.

The Tensor G5 chip will not only be completely designed by Google but also use the more efficient TSMC 3nm process, which will theoretically bring a notable improvement to the Google Tensor G5.

For now, if your Pixel phone overheats, stop the operation that causes your phone to heat up and turn it off if possible until it cools down.

Related:

• OnePlus 12 Flagship Phone is now available for Pre-Order
• Xiaomi 13 Ultra Premium Camera Phone is now only $799
• Get $100 OFF on Xiaomi 14 Pro at Giztop (1TB Variant)
• Best Messaging Apps for Android in 2023

(Via)

The post Pixel 6 Pro overheats due to a 10 min phone call, causing burnt marks over the heat sink appeared first on Gizmochina.

Google has just announced that the Pixel 6 and the Pixel 6 Pro will be receiving support for 5G networking in India. The company had recently brought support for the faster bandwidth earlier this month for the Pixel 7, Pixel 7 Pro, and even the Pixel 6a. Now, it is adding support for the two other Pixel 6 series models as well.

This is quite interesting considering the fact that the Search Engine giant did not launch the Pixel 6 and Pixel 6 Pro in the Indian market. Unlike its successor, the company only launched the Pixel 6a from the last gen lineup in the region. As of right now, the Pixel 6a will receive the update with the March Android security patch while the Pixel 6 and the Pro variant receives 5G support. So you can expect to see much faster data speeds over the last gen networking standard.

PSA – 5G functionality has started rolling out in India on Pixel 6 series and above, available on select carriers
Learn more: https://t.co/XHdZaNAysY. pic.twitter.com/nX67DDRZ0F

— Google India (@GoogleIndia) March 20, 2023

Notably, these updates arrives months after testing and gathering feedback from its users for quality and usability during the early beta stages. So now, users can head to settings to enable 5G connectivity from the networking settings in addition to the existing LTE and 3G networking. As of right now, it is unclear if and when the brand will bring support for 5G networking for some older models. This includes the likes of the Pixel 5 series, or the Pixel 4a model. Similar to the Pixel 6 lineup, these older smartphone models were also not officially launched in the country.

RELATED:

• Google Photos Develops Video Unblur Tool and Effects for Pixel 8 Series
• Google Pixel Fold will reportedly cost much lesser than Galaxy Z Fold 4 & Fold 5
• Alleged Google Pixel 7a prototype Selling on eBay months before Launch
• Honor Magic5 Pro vs Samsung Galaxy S23 Ultra: Specs Comparison
• Best OnePlus 11 Case 2023 – Sandstone, Silicone, Hybrid & More

The post Google Pixel 6 & Pixel 6 Pro receives 5G support in India appeared first on Gizmochina.

A major exploit in Google Pixel smartphones has just been revealed, allowing an attacker to unlock and access your smartphone by switching out the SIM card.

The issue has been discovered by David Schütz (CVE-2022-20465) who says an “attacker with physical access [can] bypass the lock screen protections (fingerprint, PIN, etc.) and gain complete access to the user’s device.” The issue has been fixed in the November security patch for Pixel devices. Read below to find out how the exploit works.

We can see a locked smartphone with biometrics deactivated after numerous unsuccessful attempts in the demonstration video above. After changing the SIM, you will be prompted to “Enter SIM PIN.” After three incorrect PIN attempts, users are prompted to enter the PUK code, which you should know because it’s your SIM card.

When you enter a new PIN number for that SIM card after successfully entering the previous one, the phone will unlock to your home screen and give you full access.

Schütz explains that since the attacker could just bring his/her own PIN-locked SIM card, nothing other than physical access was required for exploitation. The attacker could just swap the SIM in the victim’s device, and perform the exploit with a SIM card that had a PIN lock and for which the attacker knew the correct PUK code.

Google did not address the Pixel lockscreen issue until September after Schütz reported the unlock bug to Android’s Vulnerability Rewards Program in the middle of this year (after some in-person prompting). A $70,000 reward was given for solving it, and it is classified as a “System” issue with “High” severity in the November security patch. The fix has been rolled out to Android 10, 11, 12, 12L, and 13 AOSP versions. The November security patch is currently available for the Pixel 4a and newer. So if you have a Pixel device with this patch available, we advise you to update ASAP.

RELATED:

• Apple iPhone 14 series suffers from a SIM bug, but a fix is on its way
• Google One VPN service now available for Mac and Windows users
• Google Pixel 8 and 8 Pro are codenamed Shiba and Husky; powered by Tensor G3 SoC

(Via: 9to5Google)

The post Major Pixel Bug Allows Anyone To Unlock Your Phone Using Sim Card, Update Immediately appeared first on Gizmochina.

A lot of people consider giants like Samsung, Xiaomi, and OPPO as the main rivals of Apple, but they forget another important technology giant which could be considered the main rival of Apple on the software side if we talk about mobile phones. We are talking about Google, the company which develops the Android operating system. And given that Apple devices come with iOS, the reasons to consider it as a rival are pretty obvious. This year, Google released a top-tier flagship: the Google Pixel 6 Pro. This is the reason why it is now able to perfectly compete with Apple in the flagship segment. Is it better to choose an Apple flagship or a Google flagship? There is no better way to understand it than a comparison. Here is a comparison between the main specifications of the Apple iPhone 14 Pro and the Google Pixel 6 Pro. Note that what we say in this comparison would be the same if you replace the iPhone 14 Pro with the iPhone 14 Pro Max, with the exception of the battery and the display size.

Apple iPhone 14 Pro vs Google Pixel 6 Pro

Design

Which phone has the best design? It is mostly a matter of taste: I personally prefer the iPhone 14 Pro, but Google did a great job by releasing a flagship with one of the most original designs out there. The new iPhone 14 Pro is the first Apple device with the Dynamic Island: it ditches the notch in favor of a pill shaped punch hole that can also show info from apps and more. It has higher built quality as it is built with Ceramic Shield glass and a stainless steel frame, and it also features better water resistance with the IP68 certification and the ability to go underwater up to 6 meters deep for a max time of 30 minutes. The Google Pixel 6 Pro is way bigger than its rival from Apple, but it comes with very narrow bezels and an original rear side. It is built with a glass back protected by Gorilla Glass Victus, it has an aluminum frame, and the IP68 certification (up to 1.5 meters for a max time of 30 minutes).

Display

It is a very hard fight between the displays of these two phones. The Apple iPhone 14 Pro has a Super Retina XDR OLED display with a diagonal of 6.1 inches, a Full HD+ resolution of 1179 x 2556 pixels, the LTPO technology enabling an adaptive refresh rate from 1 to 120 Hz, the HDR10 certification, Dolby Vision support, and a peak brightness of up to 2,000 nits. The Google Pixel 6 Pro has an AMOLED display with a wider 6.71-inch diagonal, a Quad HD+ resolution of 1440 x 3120 pixels, an adaptive refresh rate from 1 to 120 Hz, the HDR10+ certification, and an in-display fingerprint reader. I personally prefer the Google Pixel 6 Pro because of its wider diagonal, better for productivity and gaming, but the iPhone 14 Pro might provide way higher image quality.

Specs & Software

Both these phones are equipped with a flagship-class hardware department, but the Apple iPhone 14 Pro should be able to provide higher performance in a lot of scenarios thanks to the great optimization of the iOS operating system. It is powered by the Apple A16 Bionic mobile platform built with a 4 nm production process and sporting an octa-core architecture with two performance cores running at a max frequency of 3.46 GHz, two energy cores running at 2.02 GHz, and a 5-core proprietary graphics unit. The chipset comes with 6 GB of RAM and up to 1 TB of native storage depending on the chosen configuration. The Google Pixel 6 Pro gets a Google Tensor chipset built at 5 nm and with an octa-core architecture, as well as a max clock frequency of 2.8 GHz. The chipset is paired with 12 GB of RAM and up to 512 GB of native storage. The iPhone runs iOS 16 and it will get the longest software support Apple is able to provide, while the Pixel runs Android 12 and it will get the same from Google.

Camera

Both these phones feature astonishing camera setups as well as amazing software to manage these cameras. The iPhone 14 Pro is the first iPhone with a 48 MP main camera and it also comes with a telephoto sensor and an ultrawide lens with 12 MP resolution. The Google Pixel 6 Pro sports a 50 MP main camera with OIS, a 48 MP telephoto sensor with 4x optical zoom, and an ultrawide lens with a 12 MP resolution. Which one will shoot the best photos? It is yet to be discovered.

• Read More: Apple iPhone 14 & iPhone 14 Pro Max charging speeds revealed

Battery

The battery found on the Google Pixel 6 Pro is much bigger than the one found on the iPhone 14 Pro. With a capacity of 5003 mAh, it lasts definitely longer on a single charge in a lot of scenarios. On the other hand, if you need a bigger battery on an Apple device, you can choose the iPhone 14 Pro Max providing an even longer battery life.

Price

The iPhone 14 Pro starts from $1300 or €1300, while the Google Pixel 6 Pro carries a starting price tag of €900 or $900 (prices vary depending on the market). Which one would you pick?

Apple iPhone 14 Pro vs Google Pixel 6 Pro: PRO and CONS

Apple iPhone 14 Pro

PRO

• More compact
• Amazing build quality
• MagSafe
• Face ID

CONS

• More expensive

Google Pixel 6 Pro

PRO

• Bigger battery
• 4x optical zoom
• Wider display
• Fingerprint reader

CONS

• Dimensions

RELATED

• iPhone SE vs iPhone 13 mini: Specs Comparison
• iPhone 13 Pro vs iPhone 12 Pro Max: Specs Comparison
• Google Pixel 6 Pro vs iPhone 13 Pro Max: Specs Comparison
• Vivo X70 Pro+ vs iPhone 13 Pro Max: Specs Comparison

Check the latest videos from our YouTube channel and subscribe:

The post iPhone 14 Pro vs Google Pixel 6 Pro: Specs Comparison appeared first on Gizmochina.

Last month, Google started rolling out the Android 13 update for all of its eligible Pixel smartphones. The update arrived on devices like Pixel 4, Pixel 4XL, Pixel 5, Pixel 6, Pixel 6 Pro, and the Pixel A-series devices such as the Pixel 4a, Pixel 4a (5G), Pixel 5a 5G, and Pixel 6a.

Now, the search giant is pushing out the first update since the introduction of Android 13 on these devices. The update comes with a build number TP1A.220905.004 and is rolling out for the users of Pixel 4 (XL), Pixel 4a, Pixel 4a (5G), Pixel 5, Pixel 5a (5G), Pixel 6, and Pixel 6 Pro. It includes many performance improvements and bug fixes for these devices as mentioned below.

Changelog

• Fix for issue occasionally causing increased battery drain from certain launcher background activities
• Fix for issue preventing wireless charging mode from activating in certain conditions

• Additional improvements for fingerprint recognition and response in certain conditions

• Fix for issue occasionally preventing certain Bluetooth devices or accessories from connecting

• Fix for issue occasionally causing notifications to appear truncated on the lock screen

As usual, the update will roll out in phases and will continue over the next week depending on carrier and device. Google has said that the Pixel 6a will receive the update later this month.

RELATED:

• Google Pixel 7 series launch set for October 6, Pixel Watch will also tag along
• Alleged Google Pixel 7 Pro stars in yet another unboxing video
• Google may launch the Pixel Watch alongside Pixel 7 for around $400
• Google is already developing the Pixel 8 series chipset: Report

The post Google Pixel devices receive first Android 13 update, fixes wireless charging issue & more appeared first on Gizmochina.

While the Pixel 6 series was a success in the market, it is also known for being one of the most buggiest smartphones from Google. The brand has offered various fixes for a lot of these issues, but the amount of bugs might have the company lose out on customers.

According to a TradingPlatform’s Edith Reads, the Search Engine giant might be losing out on its loyal userbase over the number of issues its Pixel 6 series have been facing. As per the latest analysis from her company, the Pixel devices have a drastic fall in popularity. The report adds that as many as 36 percent of the Pixel owners are considering to abandon the brand for another smartphone maker.

Overall, the Pixel 6 and Pixel 6 Pro has seen great reception in the market. However, the two flagship smartphones have been plagued with a number of bugs ever since they were first launched. The issues ranged from problems with the display, its fingerprint scanner, and many more. As of right now, most of these issues have been addressed but there are still issues that affect the device on a hardware level.

A great example being the fingerprint scanner, which has been slow since the start. The updates have attempted to fix this but the scanner is still slower than other rivals in the market. While many of the bugs were minor inconveniences, TradingPlatforms’s report has suggested that Pixel 6 series has not been performing well at carrier stores.

RELATED:

• Google Chromecast with TV 4K spotted on Flipkart, India pricing revealed
• Source code reveals Google Pixel 7 Pro will have a brighter display than the Pixel 6 Pro
• Tata Play partners with Google to launch the Nest cam (battery) in India

The post Google Pixel 6 bug issues may have users abandon the brand appeared first on Gizmochina.

Google has just announced the latest Pixel feature drop for Google Pixel devices. Along with new features, the update also brings multiple bug fixes for the Google Pixel 6 and 6 Pro along with the latest security patch. So without further ado, let’s take a look at the update.

Starting with the new features in this update, Pixel devices now get access to proof of vaccination in supported regions, Google’s At a Glance is now available from the Lock Screen, and Live Translate gets a few new languages. Other than that, the update brings the June 2022 security patch level along with multiple bug fixes which you can check out in the changelog below (Only for Google Pixel 6 & 6 Pro).

• Fix for issue causing Google app crash after updating device in certain conditions.
• Fix for issue preventing GBoard from appearing in certain apps.

• Fix for issue causing loud noise artifacts during calls under certain conditions.
• Fix for issue preventing audio playback over USB accessories when using certain third-party apps.
• Fix for issue preventing incoming notifications for calls in certain conditions (A-199020405).
• Fix for issue preventing pre-screened calls to be accepted in certain conditions.

• General improvements for idle power consumption under certain conditions.

Biometrics

• Fix for issue causing under-display fingerprint unlock to fail while in a call with AOD active.

• General improvements for Bluetooth stability & performance.

• Fix for issue causing white screen to display after double tapping power to open Camera.
• Fix for issue occasionally causing Camera to launch when tapping power button for Emergency SOS mode.
• Fix for issue occasionally causing click sound in the background of captured videos.
• General improvements for camera stability & performance.

• Fix for issue causing display artifacts after waking device in certain conditions.
• Fix for issue causing display artifacts in Photos preview in certain conditions.

• Fix for issue causing display brightness to increase when flashlight is turned on.
• Improvements for adaptive brightness response in low light levels.

• General improvements for system stability & performance.
• Kernel update to 5.10.81 for Pixel 6 & Pixel 6 Pro.

• General improvements for network connection stability & performance.

• General improvements for Wi-Fi stability & performance.

To check out the entire changelog for every eligible Google Pixel device, you can follow this link.

RELATED:

• Google Pixel 6a listing appears on Facebook Marketplace ahead of release
• Samsung continues to collaborate with Google on the 2nd Generation Tensor SoC: Report
• Google Pixel 7 Real Life Photos Leaked via Prototype Listed on eBay

The post Checkout Google Pixel 6 bug fixes and new feature in the latest update appeared first on Gizmochina.

Earlier this month, Google introduced the new Pixel 7 and Pixel 7 Pro alongside the upcoming Pixel 6a, Pixel Watch, and Pixel Buds Pro. This was just a teaser for the upcoming flagship Android phones and we’re still about five months off the launch of the Pixel 7 series. However, a new report is here to reveal some interesting details about the display and other major specs of the smartphone duo. Let’s take a look at it.

According to a report by 9to5Google, the Pixel 7 and Pixel 7 Pro will feature the exact same display as their predecessor Pixel 6 and 6 Pro. The publication uncovered this from the Android Open-Source Project, where Google created two new display drivers, one tagged C10 and the other P10. The tags appear to be the abbreviated version of “Cheetah” and “Panther”, the codenames of Pixel 7 and 7 Pro.

Further digging into the code disclosed that both the devices will sport the same Samsung-made display panels as the Pixel 6 duo, with model numbers S6E3FC3 and S6E3HC3, respectively.

This means that the Pixel 7 will feature a 1080 x 2400 display that is capable of running at up to 90Hz, whereas the Pixel 7 Pro will have a 1440 x 3120 display that can support up to 120Hz refresh rate. If you recall, these are the same specs as the 2021 Pixels.

However, the Pixel 7 is said to be a bit smaller than last year’s Pixel 6, the handset’s display will be 1mm narrower and 2mm shorter. On the contrary, the Pixel 7 Pro’s display is the same as the Pixel 6 Pro but it will have a native 1080p mode, which is likely to improve battery saving in Low Power Mode.

Judging from leaks and rumors, the Pixel 7 series only seems to carry minor upgrades and nothing out of the ordinary. However, there are still 5 months to the launch and Google may surprise us.

Related:

• Google Pixel Fold smartphone to reportedly launch in Spring next year
• iPhone SE 2022 vs Google Pixel 6a: Specs Comparison
• Google Assistant now available on the Galaxy Watch 4 in some regions

The post Pixel 7 and 7 Pro reportedly share display and other key specs with the Pixel 6 Duo appeared first on Gizmochina.

Last month, we reported on numerous Google Pixel 6 users facing issues with their smartphone’s WiFi. The search giant officially confirmed the issue later that month and stated that they are working on a fix that will arrive with the march update.

Now, the update has been made available to Pixel 6 and Pixel 6 Pro users which brings along the March feature drop, Android 12L, the March security patch, and many bug fixes. In a tweet, Mishaal Rahman had listed all the features that were coming to the Pixel 6 devices with the March feature drop, and now, the update is finally rolling out to users after being delayed for two weeks.

pic.twitter.com/qgHecMxdGR

— Mishaal Rahman (@MishaalRahman) March 7, 2022

The changelog for the March update is quite long, but it notably mentions fixing the notorious WiFi bug on the Pixel 6 devices.

For those unaware, Pixel 6 users have been facing troubles with Wi-Fi, like not being able to turn it on, in the first half of this month. The issue began appearing after people updated their devices to the second February update that was released previously. And now, the brand has stated that they are working on a fix, and users can see a software update rolling out sometime in March 2022.

Additionally, the phones are also gaining support for Verizon’s 5G C-Band network, which gives the devices access to the full power of the 5G Ultra-Wideband (UEB). However, this is a feature that’s specific for US users only.

RELATED:

• Google Pixel Notepad foldable smartphone production kicks off in Q3 2022: Report
• Android 12L reportedly fixes Widevine issues on Pixel devices
• Google Pixel 7 series flagship smartphones could launch sooner than the usual timeframe

The post Google Pixel 6 devices finally receive the March feature drop, Android 12L & WiFi bug fix appeared first on Gizmochina.

Google is encouraging Pixel 6 and Pixel 6 Pro owners to purchase some accessories for their devices by offering a $10 coupon for the Google Store, sent through email. A snippet from the email reads, “Use the code below to save on your next purchase. Get inspired with devices and accessories that are a great match for your Pixel 6 Pro.”

Among the accessories Google is convincing users to buy is a Pixel 6 Pro case that costs $29. Applying the coupon brings the price down to $19. The case makes use of a dual-layer shock-absorbing material with raised edges that helps protect the device against scratches and drops.

The coupon also covers the Pixel Buds A-series which normally cost $99 but will cost $89 after the coupon is applied. The TWS earbuds come with features like 12mm dynamic drivers, dual beamforming microphones, and offer up to 24 hours of playback time. Adaptive Sound is supported too, allowing the Buds to adjust their volume automatically depending on the environment.

Lastly, the coupon suggests availing of the Pixel Stand wireless charger which is compatible with the Pixel phones, Pixel Buds, and various other Qi-certified devices.

If you own a Google Pixel 6/6 Pro and haven’t received the $10 coupon yet, then keep your eyes peeled for the mail. It’s unclear how Google is determining who gets qualified for the coupon but it could be tied to the region a device owner resides in.

RELATED:

• Google Pixel 7 Pro render reveals changes for the camera bar design on the back panel
• Google Pixel 6a & Pixel Watch carrier listing hints at imminent launch
• Samsung Galaxy S22 Ultra vs Google Pixel 6 Pro: Specs Comparison
• Google Pixel 6’s selfie camera can now turn into a battery indicator using this app
• Global variant of Redmi Note 11 Pro+ 5G appears on Google Play Console

The post Google emails $10 coupons to Pixel 6 owners encouraging them to buy accessories appeared first on Gizmochina.

Samsung Galaxy S22 Ultra is currently the most expensive Android phone and it has no compromises in terms of specifications. It even adds a few important killer features making it innovative and suitable for productivity. But a few months ago, Google released a top-tier flagship as well, and a lot of people will opt for it because of the amazing Google software support. Is the Google Pixel 6 Pro able to compete with the Samsung Galaxy S22 Ultra or has Samsung released a better flagship once again? This is a comparison between their specifications which will let you find out.

Samsung Galaxy S22 Ultra vs Google Pixel 6 Pro

Design

Google paid a lot of attention to the design of its brand new Pixel 6 Pro. This handset comes with a very original design including a horizontal camera module, two different colors for its glass back protected by Gorilla Glass Victus, and an aluminum frame. The phone is more compact than Samsung Galaxy S22 Ultra and it is waterproof with the IP68 certification. Coming to the Galaxy S22 Ultra, it has an original design too, different from its predecessor Galaxy S21 Ultra. It looks like a Galaxy Note and it even comes with an integrated S Pen. But it is chunkier and less original than the Pixel 6 Pro, that is the reason why I personally prefer the Google flagship.

Display

Samsung is the absolute leader of the display sector and the Galaxy S22 Ultra has a definitely better screen than the Google Pixel 6 Pro. It is an AMOLED panel with an adaptive refresh rate of up to 120 Hz, a Quad HD+ resolution, the HDR10+ certification, the Gorilla Glass Victus Plus protection, and an ultrasonic in-display fingerprint reader. Last but not least, it supports the S Pen for handwriting and drawing. Despite being inferior, the Google Pixel 6 Pro still comes with an amazing display, close to its rival with its Quad HD+ resolution, adaptive refresh rate up to 120 Hz, in-display fingerprint reader, and HDR10+.

Specs & Software

The Samsung Galaxy S22 Ultra wins the hardware comparison because it sports a stronger processor. The Google Pixel 6 Pro is the first phone with the first Google proprietary chipset, the Google Tensor. This chipset can be a good rival of the Snapdragon 888, but it is not even close to the Snapdragon 8 Gen 1 found on the Samsung Galaxy S22 Ultram, built with a 4 nm production process and running at a max frequency of 3 GHz. Further, the Samsung Galaxy S22 Ultra offers up to 1 TB of internal storage, while the Google Pixel 6 Pro stops at 512 GB. On the other hand, the Google Pixel 6 Pro will get faster software support as it is a Google phone and Google develops Android.

Camera

On the paper, the Samsung Galaxy S22 Ultra sports the most advanced camera system. However, several experts believe that the Google Pixel 6 Pro provides a better photo quality. It comes with a 50 MP main camera including laser autofocus and OIS, a stunning 48 MP telephoto sensor with 4x optical zoom, and a 12 MP ultrawide camera. Google’s algorithm seems to do a great job at enhancing the photo quality provided by its flagship.

• Read More: Samsung Galaxy S22 Ultra vs iPhone 13 Pro Max: Specs Comparison

Battery

Both Samsung Galaxy S22 Ultra and Google Pixel 6 Pro come with a battery capacity close to 5000 mAh. The battery life provided by these two handsets should not be so different if we consider that they have similar hardware components in terms of efficiency.

Price

The Google Pixel 6 Pro can be purchased for less than €1000 or $900, while you need more than €1250 or $1200 to grab a unit of the Galaxy S22 Ultra. The Samsung flagship is a more advanced device thanks to S Pen, its great display, stronger processor, and faster charging. But the Google Pixel 6 Pro has its important pros such as software support and its amazing camera performance.

Samsung Galaxy S22 Ultra vs Google Pixel 6 Pro: PRO and CONS

Samsung Galaxy S22 Ultra

PRO

• Integrated S Pen
• Gorilla Glass Victus+
• Faster charging
• Better processor

CONS

• Price

Google Pixel 6 Pro

PRO

• Google’s software support
• Great telephoto sensor
• More affordable
• More compact

CONS

• Inferior chipset

RELATED

• Samsung Galaxy S22 Ultra vs iPhone 13 Pro Max: Specs Comparison
• Samsung Galaxy S22 vs Galaxy S22+ vs Galaxy S22 Ultra: Specs Comparison
• Xiaomi 12 vs Samsung Galaxy S22: Specs Comparison
• Realme 9 Pro vs Realme 9 Pro+ vs Realme 9i: Specs Comparison

Check the latest videos from our YouTube channel and subscribe:

The post Samsung Galaxy S22 Ultra vs Google Pixel 6 Pro: Specs Comparison appeared first on Gizmochina.

If you think that the default battery indicator on your Google Pixel 6/6 Pro just isn’t slick enough, you can now replace it with another — only this one wraps around the selfie camera cut out instead of sitting tight on the right of the status bar. The “Energy Ring” app already supported a bunch of devices but the list now includes the Pixel 6 series too.

The battery ring engulfs the front camera and shows the remaining battery percentage in real-time. It’s highly configurable, allowing color codes for certain percentages. There are even a number of animations you can choose from that’ll play for as long as the phone’s on charging, and they do look kind of mesmerizing.

The app itself is free but an in-app purchase will remove ads along with unlocking three additional color configs. While its latest update added support for the Pixel 6 series, I tried the app on my Xiaomi Mi 11X and it worked flawlessly, despite the device being unmentioned on the supported list.

However, you will probably want to make some tweaks to avoid redundancy. Simply download the System UI Tuner app and head over to Android’s built-in tuner using it. Once that’s done, just turn off the battery icon from the status bar so that you rely on nothing but the battery ring.

RELATED:

• Google launches its Play Pass game service in India, Here are the prices
• Google Pixel 6 users are unable to use fingerprint scanner after screen repairs
• Google Pixel 7 Pro CAD renders emerge to reveal design months ahead of its launch
• Older Google Pixel devices are getting Gboard’s grammar checker
• Google launches Chrome OS Flex to turn older PCs and Macs into Chromebooks

The post Google Pixel 6’s selfie camera can now turn into a battery indicator using this app appeared first on Gizmochina.

The Google Pixel 6 and Google Pixel 6 Pro have been officially confirmed to skip the Android 12L beta 3 update and will get the next release instead that’s been scheduled for March.

The information comes from a Reddit thread on r/Android_beta (via Android Police) where Pixel 6 owners inquired why their devices were not receiving the latest beta despite signing up for the program.

As a response, Google from its official Reddit account stated that “If you’re enrolling a Pixel 6 or Pixel 6 Pro that is on the latest February build SQ1D.220205.004, you will not receive an update to 12L Beta 3, but instead will receive the next upcoming beta build release in March as long as you keep your device enrolled.”

In other words, Pixel 6 series users will have to wait for the release of Android 12L beta 4 in order to get updated to the latest version.

The response can also be taken as a confirmation for a fourth beta since the official roadmap released last year showed beta release plans only until February, with an official “Final release” scheduled for some time after.

But if you simply can’t shake off the urge to jump aboard Android 12L beta 3, then you can try re-checking for the update for about five times after opting in. A Redditor says it worked for them so it’s worth a shot.

RELATED:

• Micromax In 2C name spotted in Google Play supported devices list, likely to launch soon
• Google Pixel 7 Pro CAD renders emerge to reveal design months ahead of its launch
• Google working on fix for Pixel 6 series Wi-Fi issue caused by Feb update
• Older Google Pixel devices are getting Gboard’s grammar checker
• Google Pixel 6 users are unable to use fingerprint scanner after screen repairs

The post Google Pixel 6 series confirmed to skip Android 12L beta 3 appeared first on Gizmochina.

While the Google Pixel 6 series has seen a successful launch, it has been plagued with a number of issues ranging from firmware update bugs, signal drop issues, and more. But now, the latest problem makes the fingerprint sensor completely unusable.

During the early days of the Pixel 6 launch, many users had reported on the fingerprint scanner being slow. The company addressed the issue in future software patches but that did little to fix the issue. However, a new problem has added on to the bugs related to the fingerprint scanner, as users are unable to use the biometric security system after getting their screens replaced (Via GSMArena).

Notably, this issue affects both the base and Pro model, with various users taking to Reddit and Google Support threads to voice their complaints. Furthermore, the issue is even affecting those that have replaced the display from the Search Engine giant’s officially endorsed service shops, like UBreakIFix. Interestingly, even the technicians working on the repairs are unable to get the feature to work every time. Apparently, the problem is due to the use of Google’s provided fingerprint calibration tool.

This tool fails to install the new fingerprint scanner to the device, for a small percentage of users that are getting the screen replacements. Those affected by the problem see the notification “Couldn’t find the unique calibration software for this device”. There has been no official word from Google as of right now, so we will have to wait for an official statement to know how the company goes about solving another one of the Pixel 6 issues.

RELATED:

• Google launches Chrome OS Flex to turn older PCs and Macs into Chromebooks
• Google Pixel 6 series officially launched in Singapore, Here’s the pricing
• Samsung makes Google Messages default SMS app for Galaxy S22 lineup in the US
• Google to launch its foldable Pixel phone in Q4 2022: Report

The post Google Pixel 6 users are unable to use fingerprint scanner after screen repairs appeared first on Gizmochina.

While the Google Pixel 6 series has seen great success, the latest flagship lineup is still quite limited in the regions it is available in. But now, the company is releasing the high end premium devices in another market, which is Singapore.

Now, the Search Engine giant’s Pixel 6 and Pixel 6 Pro will be available for purchase in the Southeast Asian country. For those unaware, the Pixel 6 series was first announced back in October of 2021. So its launch in Singapore arrives around nine months since its official release, which is quite a long time. However, Google clearly believes that it is better late than never. Similarly, the company had even launched its current flagship in Italy and Spain as well, earlier this month.

The Pixel 6 and Pixel6 Pro will be available in Singapore through the Google Store (Via 9To5Google). This appears to be a quiet launch as Google had previously confirmed that the flagship phones were on their way to Singapore, and now we even have the official pricing as well. The Pixel 6 is available in Stormy Black and Sorta Seafoam. while the Pixel 6 Pro is available in Stormy Black and Cloud White.

Looking at their pricing, the Pixel 6 starts from 999 Singapore Dollars (roughly 742 US Dollars). On the other hand, the Pixel 6 Pro is available in the region for 1,299 Singapore Dollars (roughly 965 US Dollars). Google is also releasing the smartphones with the protective covers worth around 49 Singapore Dollars (roughly 36 US Dollars), Pixel Stand that costs 119 Singapore Dollars (roughly 88 US Dollars), and a 30W USB Type C charger worth 45 Singapore Dollars (roughly 33 US Dollars).

RELATED:

• Google to launch its foldable Pixel phone in Q4 2022: Report
• Samsung makes Google Messages default SMS app for Galaxy S22 lineup in the US
• Google dLight is a smart lamp that you can probably never buy
• Dynamic theming will come to Samsung, Xiaomi & other OEM’s Android 12 devices: Google

The post Google Pixel 6 series officially launched in Singapore, Here’s the pricing appeared first on Gizmochina.

The Pixel 6 series devices from Google are the most popular phones from the search giant yet however, the devices have pretty been plagued with bugs pretty much from launch. And now, Pixel users are facing a new bug.

New reports have surfaced across Reddit and Google support forums with Pixel 6 and Pixel 6 Pro users complaining of issues faced with Wi-Fi. According to the reports, the Wi-Fi of the device is automatically being shut off while the phone is locked. In some cases, the users are not able to turn on the Wi-Fi altogether. Google support directed one user to reset the device which initially worked, however, the issue later returned.

The issues have reportedly arisen after the latest February update and do not affect every user, however, there are enough cases reported that make it clear that it isn’t a rare issue either.

Users have found temporary workarounds which include resetting network settings, disabling “Adaptive connections,” and removing a Wi-Fi network. These workarounds can buy you some time with your Wi-Fi which could range from a few minutes to a few hours, however, it is not a permanent fix.

Google has yet to officially acknowledge the issue, and it is now certain how long it will take the search giant to fix the problem. However, Google’s recent track record in fixing the recent Magic Eraser bug gives users hope for a quick fix.

RELATED:

• Google swats Pixel 6 Magic Eraser bug with recent Photos app update
• Google Pixel 6 and Pixel 6 Pro flagship smartphones now available in Italy and Spain
• Google Pixel 6 breaks company’s previous sales records

The post Wi-Fi issues appear on Google Pixel 6 series devices: Report appeared first on Gizmochina.

The Google Pixel 6 series which is the company’s most popular smartphone to date has not been made available in India this time around. However, a listing for the Pixel 6 Pro has appeared on Amazon India.

The device is listed at a jaw-dropping price of Rs. 117,150 ($1,569) which is quite a hike from its U.S. listings of $899 even after import duties and taxes. The product is marked as Amazon fulfilled and comes with a 7-day return and Amazon warranty policy. However, considering that Google never released the device in India. It is not eligible for any sort of warranty within the nation.

The two red flags noticed for this listing are the reviews and ratings of its seller Worldwide_Store which has been accused of selling imported products as well as having some allegations of supplying fake products. The supplier has had a 73% negative rating in the past 90 days. Secondly, the Amazon listing mentions that the Pixel 6 Pro has T-Mobile as its wireless carrier which indicates that the phone is most likely carrier-locked and belongs to one of the regions where T-Mobile operates like the USA or Poland.

The seller has another Pixel 6 Pro listed for Rs. 104,000 ($1,393) however, it is not marked under the Amazon fulfilled program meaning that Amazon is not the one storing, packing, and dispatching the product which increases the chances of it being a fake product.

Considering all these factors, we would advise readers to steer clear of Pixel 6 Pros listed on Amazon as they could be a region-locked phone at best and a complete fake at worst.

RELATED:

• Lady orders an iPhone 13 Pro Max but got a $1 bottle of hand soap instead
• Soap bars delivered instead of iPhone 12 at Flipkart’s Big Billion Days Sale
• Google Pixel 6 and Pixel 6 Pro flagship smartphones now available in Italy and Spain

The post Google Pixel 6 Pro appears on Amazon India, but buyers beware.. appeared first on Gizmochina.

Google recently fixed a whole host of major connectivity issues on their latest Pixel 6 and Pixel 6 Pro devices. However, the Google flagships can’t seem to catch a break as another bug has appeared on the devices.

Users have taken to Twitter and Reddit to report and discuss a new issue they are facing with the Magic Eraser feature on the Google Photos app. Users have stated that whenever they tap on the Magic Eraser, the Photos app crashes.

@googlephotos has been crashing every time I try to use the "magic eraser" on my Pixel 6. Has it been the case for anyone else @madebygoogle users?

— John Sohrawardi (@johnsohrawardi) February 4, 2022

The bug has apparently come along with the latest update to the Google Photos app. Users have tried to find a workaround to this problem by clearing cache and data but to no avail. Restoring the device to the factory setting also doesn’t work since it removes the Magic Eraser functionality completely from the device.

For those unaware, Magic Eraser is one of the key features in the Pixel 6 devices which uses the machine learning capabilities of Google’s new Tensor processor and enables users to remove unwanted objects or people from their photos.

Google Photo’s official Twitter handle has directed users affected by this bug to follow the steps in their “Fix an installed Android app that isn’t working” article, however, the generic fixes mentioned in the article don’t appear to work.

For users who have not been infected by this new bug yet, we highly recommend you to turn off the automatic update for the Google Photos App for the time being. To turn off automatic updates for your Google Photos app, go to the Play Store and open the Google Photos app page. Then click the three dots button on the top right and uncheck the “Enable auto-update” checkbox.

RELATED:

• Google Pixel 6 and Pixel 6 Pro flagship smartphones now available in Italy and Spain
• Google’s tablet division is on a recruitment spree; a new Pixel tablet on the way?
• Google hiring ‘camera ISP’ experts for 2nd Gen Tensor chips: Report

The post Google Pixel 6 devices have a new bug, this time with the Magic Eraser appeared first on Gizmochina.

It’s been a few months since Google announced its flagship smartphones — Pixel 6 and Pixel 6 Pro. Now, both these smartphones from the company are finally available for purchase in Italy and Spain.

With the availability of the Pixel 6 and Pixel 6 Pro smartphones in Italy and Spain, the latest flagship devices from Google are now available in 11 countries. This is also the first time the tech giant is expanding the availability of phones to new regions.

The Google Pixel 6 lineup is available in only Just Black or Carbon color option in Italy and Spain. The standard model is priced at €649 for the 128GB storage model while the Pro model with 128GB storage costs €899.

The company says that both the devices will have “limited availability” and adds that additional devices will be made available from May. It remains unknown what’s the stock count for both these new offerings.

For those who are unaware, the Pixel 6 series phones were already available in select European markets ever since their unveiling in October last year, which include United Kingdom, France, the Republic of Ireland, and Germany.

These are the first smartphones from Google that come powered by the company’s own Google Tensor chipset and not Qualcomm’s Snapdragon processor. The strategy seems to have worked as the company recently revealed that these new phones managed to break all the previous phone sales records.

The launch of Pixel 6 series phones in other regions come at a time when the company is expected to soon launch the Pixel 6a smartphone. However, the launch is still months away and we expect to know more about the phone in the coming weeks.

RELATED: 

• Google’s tablet division is on a recruitment spree; a new Pixel tablet on the way?
• Google leaks the Pixel 6a moniker via an official coloring book
• Samsung Galaxy S21 FE vs Google Pixel 6: Specifications Comparison
• Google Assistant can now be shut up simply by saying “stop”
• Google Pixel 6a aluminum dummy reveals a design similar to the Pixel 6 and 6 Pro

The post Google Pixel 6 and Pixel 6 Pro flagship smartphones now available in Italy and Spain appeared first on Gizmochina.

Finally, Pixel phones are flagships again. Google released the Pixel 6 Pro last year and it is currently expanding to more regions, even though there are actually limited quantities available in some of them. Recently, data showed that OnePlus has beaten Google in its own country in terms of sales: the USA. But can OnePlus phones compete with Google ones in every aspect? This comparison will highlight the differences between the best flagships of each brand: the OnePlus 10 Pro and the Google Pixel 6 Pro. If you are having a hard time choosing between these two devices, this comparison between their specifications will make your life easier.

OnePlus 10 Pro vs Google Pixel 6 Pro

Design

I love the design of the Google Pixel 6 Pro because it is very original. Its horizontal camera module and its bicolor rear cover are simply amazing. But the OnePlus 10 Pro is another stunning phone if we talk about aesthetics, especially thanks to its curved screen at the sides. Both the phones have a body made of glass and an aluminum frame, but the only waterproof phone is the Google Pixel 6 Pro with its IP68 certification. Unlike the OnePlus 9 Pro, the 10 Pro does not offer any certification against water and dust. It is very hard to choose the best design, but according to my tastes, the Pixel 6 Pro has something more to offer thanks to its original look.

Display

On the paper, it looks like the OnePlus 10 Pro has a better display. It is an AMOLED panel with the LTPO 2.0 technology providing very low energy consumption and an adaptive refresh rate from 1 to 120 Hz. The screen shows up to one billion colors with a Quad HD+ resolution of 1440 x 3216 pixels, it has a diagonal of 6.7 inches, the HDR10+ certification, and the Gorilla Glass Victus protection. Despite the OnePlus 10 Pro looks to have better specs, the Google Pixel 6 Pro still comes with one of the best displays out there: an AMOLED panel with a Quad HD+ resolution of 1440 x 3120 pixels, the LTPO technology, a 120 Hz refresh rate, and the HDR10+ standard.

Specs & Software

The Google Pixel 6 Pro is equipped with the first Google’s proprietary chipset: the Google Tensor with very advanced machine learning capabilities, paired with 12 GB of RAM and up to 512 GB of UFS 3.1 internal storage. However, the Snapdragon 8 Gen 1 mobile platform found on the OnePlus 10 Pro is actually more powerful. It is built with a 4 nm production process and runs at a max frequency of 3 GHz. It is paired with up to 12 GB of RAM and up to 256 GB of UFS 3.1 native storage. The real advantage of the Pixel 6 Pro is the software: it ships with a stock version of Android 12 and it will be the fastest phone to get the new major update to the next Android version because it is a Google device. However, the OnePlus 10 Pro will still get great software support and it is rumored to get the unified operating system created by OPPO and OnePlus.

Camera

It is very hard to establish which is the best camera phone of this duo and software optimization will play a very important role in this aspect. The Google Pixel 6 Pro has a definitely better telephoto sensor with its 48 MP resolution and 4x optical zoom. Even the main camera is more interesting. On the other hand, the OnePlus 10 Pro has a superior ultrawide camera with a 50 MP resolution and a 150° FOV, as well as the Hasselblad optimizations. I personally prefer the Pixel 6 Pro.

• Read More: Snapdragon 8 Gen1 Speed Test: Xiaomi 12 Pro vs OnePlus 10 Pro vs Realme GT 2 Pro vs iQOO 9 Pro vs Moto Edge X30

Battery

The Google Pixel 6 Pro and the OnePlus 10 Pro have more or less the same battery capacity and I do not expect big differences in terms of battery life. But the OnePlus flagship features faster charging technologies: 80W wired charging and 50W wireless charging.

Price

OnePlus 10 Pro is priced at €650/$744 in China and it is still not available globally, while the Google Pixel 6 Pro costs €900 in Europe and $760 in the U.S. The OnePlus 10 Pro has a lot of better specifications on paper, but the Pixel 6 Pro comes with great software features and cameras. Which device would you pick?

OnePlus 10 Pro vs Google Pixel 6 Pro: PRO and CONS

OnePlus 10 Pro

PRO

• Amazing ultrawide camera
• Faster charging
• One billion colors display
• Dual SIM
• Better chipset

CONS

• Not waterproof

Google Pixel 6 Pro

PRO

• UWB support
• Impressive telephoto camera
• Great front camera
• Faster updates
• Waterproof IP68
• Optional eSIM

CONS

• Slower charging
• No dual SIM

RELATED

• OnePlus 10 Pro vs iQOO 9 Pro: Specs Comparison
• Xiaomi Mi 11 Ultra vs Samsung Galaxy S21 Ultra vs OPPO Find X3 Pro: Specs Comparison
• OPPO Reno7 vs Reno7 Pro vs Reno7 SE: Specs Comparison
• Motorola Edge X30 vs Galaxy S21+ vs Xiaomi 11T Pro: Specs Comparison

Check the latest videos from our YouTube channel and subscribe:

The post OnePlus 10 Pro vs Google Pixel 6 Pro: Specs Comparison appeared first on Gizmochina.

Despite the Pixel 6 series being in the news over various bugs and issues, the Google flagship lineup has seen great success in the market. Now, an official financial report from the company has revealed that the new phones have even managed to break past its previous sales records.

Sundar Pichai, the CEO of Alphabet (parent company of Google), stated in the earning’s call that the Pixel 6 series has set an “all time quarterly sales record.” The senior official attributed the latest Pixel phones’ success to its new real time translation tools (Via AndroidPolice). Unfortunately, the Search Engine giant did not reveal any accurate figures and groups its hardware products along with its software as “Google Services.”

It includes Android, Chrome, Google Maps, Search, Google Play, and YouTube as well. But looking at the overall financial figures, we can clearly tell that the brand saw a notable rise, as its revenue hit 69 billion US Dollars in Q4 2021. This also marked a noticeable bump compared to the fourth and final quarter of 2020, in which the company had a revenue of 52.8 billion US Dollars. Meanwhile, profits also saw a boost, reaching 26 billion US Dollars in 2021, compared to 19 billion US Dollars from back in 2020.

With the Pixel series launching sometime between October and November, its clear great sales of the premium grade smartphones helped Google boost its revenue. However, it is still doubtful if the Pixel 6 is actually the best selling Pixel ever, considering it isn’t as widely available as its predecessors and has only been available since October 2021. But with its current pace, it might become the most popular Pixel model.

RELATED:

• Google’s tablet division is on a recruitment spree; a new Pixel tablet on the way?
• OnePlus grows an astonishing 524% in the US, beating Google on its own turf
• Google hiring ‘camera ISP’ experts for 2nd Gen Tensor chips: Report

The post Google Pixel 6 breaks company’s previous sales records appeared first on Gizmochina.

Earlier this month, we reported on Google Pixel 6 series network issues worsening post the December 2021 update. Now, Google has officially addressed the issue and given an expected timeline for a future patch that will fix the problem.

According to a new note published by a Pixel Community Manager, Google paused the December software update to Pixel 6 and Pixel 6 Pro devices after users reported calls dropping and disconnecting randomly. The Pixel team has now identified the issue and is working on a fix that will arrive sometime in late January along with all the bug fixes and features that were originally planned in December.

The late December fix timeline may not be satisfactory for all, hence Google has suggested a fix for customers who have already received the December fix and are struggling with the network issues. The search giant has advised these customers to revert back to the previous software version using the Android Flash Tool and perform a factory reset.

However, this solution will result in the loss of any data that has not been backed up and all the usual inconveniences that come with a factory reset of a smartphone. Additionally, you will temporarily lose access to all the bug fixes, features, and security patch that came with the December 2021 Pixel Feature drop.

At this point, it is a choice between the lesser of two evils that the Pixel 6 owners will have to make. As for the update, Google has stated that it is expected to roll out around late January but it can even arrive in the first or second week. So stay tuned as we will be keeping an eye on any notable developments.

RELATED:

• Google Pixel 6 Pro’s slow battery charging issue is an intended feature
• Some Pixel users still forced to watch Netflix in 540p despite Google promising fix around 8 months ago
• Google Pixel 6 series screen cracking issue could be a manufacturing defect

The post Pixel 6 series connectivity issues to be fixed by late January: Google appeared first on Gizmochina.

Since its launch, the Google Pixel 6 series had been plagued with a number of issues that surfaced one after another. Now, another one of these supposed issues has surfaced that affects the Pixel 6 Pro. However, this time around, it might be a feature that the company intended.

Recently, a Reddit user (Via PhoneArena) shared his experience with the Pro model in a post, in which he asked other Pixel users if their new smartphones are also facing a bug that causes the battery to charge slow. The user said that the Pixel 6 Pro charged at a “snail’s pace” and he even tried restarting the device. Although, neither restarting the phone or changing chargers help. For those unaware, the Pixel 6 Pro is powered by a large 5,003mAh battery pack that supports 30W fast charging.

Notably, other users also joined this thread, with one saying that his new Pixel took 3 hours to charge from 23 percent to 100 percent while another said that his Pixel 6 Pro went from 10 percent to 50 percent in one hour. One common factor most of the users on the Reddit thread noticed was that the range between 80 percent and 100 percent was the slowest to charge. But, it seems like this is intended by the Search Engine giant rather than being a bug.

A feature called Adaptive Charging is believed to be the culprit behind what the users’ are considering a bug. This feature uses AI and Machine Learning to determine the time that a user plugs their Pixel 6 Pro out of their chargers every day. Adaptive Charging is basically to help keep the battery of the smartphone in good health. Thus, charging speeds usually drop around 80 percent while computing how fast it needs to charge to reach 100 percent before the device is unplugged. In other words, users can disable the feature in Settings, although, your battery life might deteriorate faster in the longer run.

RELATED:

• Some Google Pixel 6 units are facing screen auto rotation issues
• TikTok becomes the King of the internet, dethrones Google
• Google Fit for iPhone now supports heart rate and respiratory rate monitoring

The post Google Pixel 6 Pro’s slow battery charging issue is an intended feature appeared first on Gizmochina.

Earlier this year, Google launched the Pixel 6 phones with punch-hole AMOLED display, Tensor chipset, and Android 12 OS. Soon after its launch, some users started facing fingerprint scanner issues, followed by network issues, and screen-cracking issues. Now, there’s a new bug reported by netizens where the screen does not automatically rotate.

As reported by AndroidPolice, the screen rotation on some Pixel 6 units do not work. It seems that the phone’s sensors aren’t responding and it is making the phone stuck in portrait mode.

The publication tried troubleshooting one of such units and as expected, the major problem was with the sensors. The gyroscope and accelerometer sensors didn’t return any data to testing apps like Sensor Test. Similarly, the compass sensor was also not working as again, it didn’t show any data. When tried in map apps the apps didn’t show data of the way the phone was pointed to. However, some other sensors like Barometer, Proximity, Magnetometer, Light sensors were found to be working in the unit tested by the publication.

As of now, there’s no clear fix for such units. But, at least a simple reboot may help. We expect the company to respond to such issues and provide a fix as soon as possible.

Google Pixel 6 Specifications 

The Google Pixel 6 comes with a 6.4-inch AMOLED display with an FHD+ resolution It has a dual rear camera system with a 50MP main lens and a 12MP secondary lens. It boasts an 8MP selfie sensor.

It is powered by Google’s in-house Tensor octa-core chipset paired with 8GB of RAM and 256GB of internal storage. The phone packs a 4,614mAh battery with support for 30W fast charging technology. It has IP68 dust and water resistance rating and features an in-display fingerprint scanner for security.

RELATED:

• Google Pixel 6 series screen cracking issue could be a manufacturing defect
• The Red Velvet OPPO Reno7 New Year Edition is up for pre-order
• Samsung Galaxy M33 5G appears on Geekbench with Exynos 1200 SoC
• Samsung Galaxy S22 Ultra live images reveal a stunning matte black color
• Meizu fined for showing ads on Meizu 18, 18 Pro in China

The post Some Google Pixel 6 units are facing screen auto rotation issues appeared first on Gizmochina.

The Google Pixel 6 series has been plagued with a number of issues since its launch. Now, the flagship lineup is suffering from another new problem, but this time, the issue lies with the display.

The news arrives from various Pixel owners that have shared their complaints on Reddit and the company’s support forum (via AndroidPolice). Reportedly, owners of the Search Engine giant’s Pixel 6 series have found that cracks have appeared on the front glass of both the base and Pro models. This issue is not entirely new either as early reports are a couple of months old as well. With the Pixel 6 Pro featuring a curved display, it is apparently more prone to suffer from this odd issue.

Notably, both variants feature a Corning Gorilla Glass Victus on the front and back. So, its even more odd that the toughest glass for phones in the market is facing this problem. The cracks first begin appearing on either one of the sides or the corners of the Pixel 6 series’ display, and unfortunately, using a screen protector does not appear to help negate this issue or make it less likely at all. For those unaware, spontaneous screen issues are not unheard off and have been seen before as well.

Although, this usually implies that the smartphone is suffering from a slight manufacturing defect. To put things simply, the small defect can cause pressure to build up in the display that eventually cracks up and possibly even split apart. Significant variations in temperatures also tend to cause this issue as well. However, the exact reasoning for the cracks are still unknown, but thankfully, only a small number of devices are facing this problem at the moment. Google has acknowledged this issue and has confirmed that it is investigating it as well. So stay tuned for more updates.

RELATED:

• Google Pixel Watch could come with some exclusive Wear OS features
• Google Pixel 6 series helps it gain ground in U.S market: Wave7 November sales report
• Google Pixel 6 network issues have reportedly worsened with December update

The post Google Pixel 6 series screen cracking issue could be a manufacturing defect appeared first on Gizmochina.

It’s getting clear now why Google chose to hold back on rolling out the December security patch for all Pixel 6 users. The month is now nearing its end but only a few lucky ones have received it.

But are they really lucky? There have already been multiple reports of network drops and low signal strength following the update. And if that wasn’t enough, it’s now joined by “a bug in the December Android update” that’s caused Hold for Me and Call Screening features to be put on pause.

The info comes from a “Product Support Manager” on the official Google forums who says that both features will be unavailable temporarily and that the Pixel software team is “actively working on resolving this issue.” Nothing was said about when a fix can be expected or when the December security update will be rolling out widely.

For those unaware, Hold for Me works with calls with business and lets your Google Assistant wait on hold for you and notifies when the support representative is ready to speak with you. Pixel 6 Call Screening, on the other hand, lets Google Assistant answer calls from numbers that are not in your contacts and shields against robocallers and spammers.

It appears that the aforementioned features have only been disabled on Pixel 6 devices running on Android S December QPR release. To check if you are on the build, head over to Settings > About Phone > Build Number and check if it starts with SQ1D.

RELATED:

• TCL restarts sales of its Google TVs after releasing software fixes
• Samsung Galaxy S21 One UI 4 update suspended due to issues with Google Play system
• Google Pixel Watch could come with some exclusive Wear OS features
• Google Pixel 6 series helps it gain ground in U.S market: Wave7 November sales report
• UK regulator says Apple & Google have an excessively strong grip on the smartphone market

The post Pixel 6 Call Screening and Hold for Me features put on hold due to bug in December security patch appeared first on Gizmochina.

Around October end, Google launched its latest Pixel 6 lineup of devices with the all-new Tensor chipset and a whole host of new features. However, it has been unclear how well these new devices are doing in their domestic U.S market. Now, a new report has emerged that sheds light on this question.

According to a 9to5Google, Wave7 Research has published a new report that breaks down brick-and-mortar carrier sales based on a sample size of multiple stores around the United States. In Wave7’s October report, Google Pixels averaged around a mere 1-2% sales with major carriers, namely Verizon, AT&T, and T-Mobile. However, this data represented the previous generation Pixel Phone sales, namely the Pixel 5 and Pixel 5a, as the latest devices were released too late in the month to affect the sales figures. 

In the November report, we observe Google’s Pixel sales have increased to anywhere between 3-5%. The flagship duo seems to be most popular at Verizon, where it managed to capture 5% of store sales in November compared to 3% back in October. Sales remained constant at AT&T, which saw 3% during both months, while T-Mobile saw a slight increase of 1%, bringing the sales share from 2% in October to 3% in November.

Samsung and Apple remain dominant in the North American market with Google now coming in at a distant 3rd.

The sales gains might not appear huge, but it is a significant increase that has not been observed throughout 2021. It signifies the increased interest of customers in the new Pixel 6 and Pixel 6 Pro, which could be credited to Google’s aggressive ad campaign, especially the heavy TV advertising.

When asked directly about the sales performance of the Pixel 6 series phones, one carrier store said that the Pixel 6 series was a cause of frustration due to a lack of inventory. Multiple Verizon employees gave similar feedback stating that inventory was “too thin” to meet the demand for the new Pixel smartphones.

However, this comes as no surprise Google has had trouble keeping the Pixel 6 series in stock since launch day due to the ongoing global chip shortage.

RELATED:

• UK regulator says Apple & Google have an excessively strong grip on the smartphone market
• Google Pixel 6 network issues have reportedly worsened with December update
• Google working on new OS for ‘innovative AR device,’ job listing reveals

The post Google Pixel 6 series helps it gain ground in U.S market: Wave7 November sales report appeared first on Gizmochina.

The Pixel December security update is here for models all the way back to the Pixel 3a, bringing along a ton of fixes for bugs across the lineup. However, for the Google Pixel 6, things have seemingly worsened with the latest patch as there have been several complaints about poor signal and network issues.

Reports of the problem have surfaced on Reddit and the Google Issue Tracker (via Android Central), with users stating that they’re now having to deal with connectivity woes in areas where there previously were no issues. The mobile network signal allegedly has been quite poor and even non-existent in some cases.

Not only does the issue lead to simple functions like calling and texting becoming a real pain, but also drains the battery faster as the phone struggles to find a proper signal. The whole thing is rather ironic considering one of the fixes included with the update was “General improvements for network connection stability & performance.”

Most reports seem to originate from Europe with some touting the .A4 or .A1 builds that were pushed out to select European countries, Canada, and Taiwan, as the culprits for the issue. However, without official clarification, the matter still remains unclear.

Regardless, many of the Pixel 6 users are yet to receive the December update as rollout seems quite spotty this time, so it would be advisable to hold off on it until the issue is addressed.

In the meantime, be sure to check out the workarounds we have listed in a recent related coverage about the issue.

RELATED:

• Google working on new OS for ‘innovative AR device,’ job listing reveals
• Google announces Android 12 Go Edition with improved performance
• Redmi 10 2022 appears on Google Play Console before launch
• TCL temporarily pulls back Google TV models from stores due to performance issues
• Google – Year In Search 2021: A touching reflection of a world struggling to heal

The post Google Pixel 6 network issues have reportedly worsened with December update appeared first on Gizmochina.

Google is finally giving some love to tablets and foldable phones with its Android 12L update, bringing along a number of improvements and optimizations for large screen devices. To recall, Android 12 was released in October and the first Android 12L developer preview followed not long after. And now, around a couple of months later, Pixel phones all the way back to the Google Pixel 3a have received the Android 12L update in the form of Beta 1.

There isn’t really much to test on Google Pixel phones, however, as most of the front-end changes can only be seen and felt on large screen devices (via XDA). The update is, after all, more of a feature-drop kind than a full-blown upgrade.

As for features, the update adds a new dual-pane UI for the notifications shade, settings, and lock screen. There’s even a Windows-style dedicated taskbar for better multitasking. In short, the layout of multiple system interfaces has been tweaked to take advantage of larger displays with a DPI higher than 600dp.

To download the Android 12L Beta 1 build for your Pixel device, simply click on one of the links below. Google has released the update for every eligible device barring the Pixel 6 series, but it shouldn’t be long before the latest Pixels get it too.

For those who’d rather not install the update manually, the Android Flash Tool can be used as an alternative installation method for the Beta build. This web-based installer comes with a GUI wizard which greatly simplifies the flashing process. But the most user-friendly installation method is still simply enrolling your Pixel in the beta program which will allow you to get an OTA officially.

RELATED:

• Google investigates reports of Pixel repairs causing private data leaks
• Google Pixel 6a aluminum dummy reveals design similar to the Pixel 6 and 6 Pro
• Google Pixel Watch to feature custom Samsung chip, official poster images leaked
• Google mail-in Pixel repair service hit with privacy breach, leaked nudes allegations
• Samsung Galaxy Z Fold3 5G gets stable Android 12-based One UI 4.0 update

The post Google Pixel phones get treated to Android 12L Beta 1 appeared first on Gizmochina.

Multiple Google Pixel 6 and Pixel 6 Pro users have taken to Reddit to complain that their phone randomly loses mobile network service, even as their older device had no such issues.

The issue doesn’t seem limited to a particular region or carrier as Pixel owners from the US, Canada, and other parts of the world are reportedly facing it (via Android Police). The phone usually recovers from the signal drops on its own but several users have also complained that when the mobile network is lost, the only way to get it back is by rebooting the device.

Complaints aren’t limited to Reddit though as there’s another thread on the official Pixel Phone Help forums with over 130 replies. Here, several reports have interestingly stated that the network drop issues started for them only recently, meaning that the problem could also be something triggered by a recent update.

While several users were able to actually get replacements after contacting Google, doing so isn’t really guaranteed to fix the issue as several of such have observed that the problem continues on the replacement unit. Google support also recommended users perform a network reset on their Pixel 6, which doesn’t seem to help at all either.

What did help though was getting a SIM card replacement from their carrier for some. Several other users reported that turning off “Adaptive Connectivity” from the Settings menu fixed the problem to a large extent.

Regardless, a definitive solution for the signal drop issue on the Google Pixel 6 series is still awaited. With no official acknowledgment from Google yet, it is near-impossible to ascertain the cause. Still, if the issue isn’t software-related, then the Pixel 6’s antennas could be the one to blame.

We previously highlighted with a Pixel 6 disassembly story how the phone has only a single antenna for mmWave 5G. An on top of that, its position isn’t exactly optimal either, as its placement is sure to be interrupted when holding the device in the landscape mode.

Either way, we hope that Google will soon be clarifying the matter.

RELATED:

• Alleged Google Pixel Watch codenamed ‘rohan’ is in the works for 2022 launch
• Google announces multiple new Android features: new widgets, Emoji Kitchen combos, digital car keys
• Google Pixel 6 Performance Benchmarks – How does it compare to other flagships?
• Google had planned to ship Pixel 5 with Tensor SoC, Here’s why they didn’t
• Google to use your Chromebook’s camera to help prevent shoulder surfing

The post Google Pixel 6 and Pixel 6 Pro users complain about signal drops, but there possible workarounds appeared first on Gizmochina.

A compatibility issue or a bug is preventing DJI apps from performing as intended on the Google Pixel 6 series, leading to some DJI devices becoming virtually unusable.

Pixel 6 and Pixel 6 Pro owners have reported that the latest versions of the DJI Fly and Mimo apps currently suffer from an issue that prevents live previews from displaying at all. Instead, all the users get to see is a black screen. The controls and other elements are still visible and work as intended but the live image fails to show up completely.

For DJI drones, the issue is a dealbreaker considering Pixel 6 owners are left with no way to see from the POV of the drone and thus control it accordingly. Framing a shot or marking a target becomes impossible too. Action 2 or Pocket 2 owners, on the other hand, are a little better off in this regard as the issue is only an inconvenience that makes it harder to get the best possible shot.

Android Police has confirmed that the DJI Fly app works just fine on Pixel 4 XL running Android 12. Therefore, it isn’t difficult to establish that the issue is indeed an incompatibility problem affecting the Pixel 6 series, likely due to the new Tensor chip.

There is no error. It just shows a black screen instead of the video feed. See all the responses in the community threadhttps://t.co/RyEl2kDsOT pic.twitter.com/F1TYCmAQpV

— Josh Dunn (@jdmaxima89) November 8, 2021

However, there are also some complaints suggesting that the issue may also affect the Galaxy S21, although it could be possible that something else is at play in this case.

Regardless, in view of the ever-increasing complaints on DJI’s public forum, moderators have confirmed that it’s a known issue and that DJI is working to fix the issue. Also suggested was to use devices other than the Pixel 6 series in the meantime.

RELATED:

• Google Pixel 6 Performance Benchmarks – How does it compare to other flagships?
• Google had planned to ship Pixel 5 with Tensor SoC, Here’s why they didn’t
• Google to use your Chromebook’s camera to help prevent shoulder surfing
• Google Pixel 6a camera details leaked, flagship-grade chip tipped
• Google offers special developer discount on Lenovo Tab P12 Pro to try Android 12L

The post DJI apps reportedly not working on Pixel 6 series, users get advised to use another device appeared first on Gizmochina.

Several Pixel 6 and Pixel 6 Pro owners have complained that they’re unable to charge their devices through older or third-party chargers – a major bummer considering that the phone’s box doesn’t include a charger. To recall, companies started giving a miss to chargers citing environmental concerns and that most users already have chargers lying around in their homes. But the issue, if widespread, really beats the purpose of not shipping a charger in the box.

Complainants say that the Pixel 6 doesn’t throw any prompts upon getting connected to a charger and acts almost as if it’s not plugged in at all. Others were a bit better off and stated that while their device does charge with a third-party charger, the charging time is ridiculously slow.

But the charging woes aren’t limited to chargers alone, as some have even reported that the Pixel 6 only charges with the USB Type-C cable that comes in the box. Other cables again lead to no response from the phone at all.

It is worth mentioning here that OEMs typically have self-developed proprietary charging technologies that are usually not inter-compatible. For example, a OnePlus Warp Charger will likely be charging the Pixel 6 at very low speeds or may not work at all. Therefore, it is advisable to use chargers from the same brand as the phone.

However, judging from complaints, the charging system on the Pixel 6 seems to be rather strict when compared to other OEMs, and seemingly rejects third-party chargers and cables completely.

Still, some users were able to find workarounds for this and we have listed them below:

1. Turn off ‘Developer options’: Honestly, this one is rather odd. A couple of users reported that their Pixel 6/6 Pro started charging the moment Developer options were toggled. While the reason behind it working is unknown at the moment, trying it out wouldn’t hurt.
2. Turn off Adaptive Charging: One user also reported that turning off Adaptive Charging made their Pixel 6 go into slow charging mode when connected. It wasn’t charging at all earlier. The same can be tried out through Settings > Battery > Adaptive Battery > Adaptive Charging.
3. Use official Google charging accessories: If nothing else works, then the last resort would be to purchase the official $30 30W charging brick and stick to using the stock USB cable.

Sources: 1, 2 (via PhoneArena)

RELATED:

• Google Pixel 6 Performance Benchmarks – How does it compare to other flagships?
• Google had planned to ship Pixel 5 with Tensor SoC, Here’s why they didn’t
• Google to use your Chromebook’s camera to help prevent shoulder surfing
• Google Pixel 6a camera details leaked, flagship-grade chip tipped
• Google offers special developer discount on Lenovo Tab P12 Pro to try Android 12L

The post Some Pixel 6 and 6 Pro users are facing trouble charging their phones, but there are possible workarounds appeared first on Gizmochina.

Google has long been teasing a major upgrade to the capabilities of the At a Glance widget on Android 12 for the Pixel 6 series. Most expected it to go live as soon as Android 12 hit stable, but that, unfortunately, hasn’t been the case. However, a new APK teardown has revealed that the new features may finally be on the way.

9to5Google, on one of their “APK Insight” posts, gave out their findings after decompiling the latest version of the Android System Intelligence app. The S10 version of the app contains a slew of new strings describing an upgraded “smartspace.” FYI, smartspace is what the Google app calls the functionality of At a Glance.

To recall, the At a Glance widget already displays various pieces of info like Weather, Commute & Time to Leave, Alerts, Travel, and upcoming calendar events and reminders.

ASI seems to be replicating all of it and has even added more, indicating two things. Firstly, At a Glance will be getting several new features. And secondly, Google may be moving At a Glance to the Android System Intelligence app for faster updates.

The new features include ‘At a store’ that will be displaying shopping lists and Google Pay rewards cards when you’re in a supported store. This one first made an appearance with the Material You teaser from May but could now finally be making its way through.

Not all of these new features are coming in late though. ‘Timer & stopwatch’, for example, has been live since the Android 12 Beta days.

But perhaps the most useful addition is ‘Connected devices’ that will let you see the connection status and battery levels for your Bluetooth devices. Connected Nest Doorbells will go a tad further and even display a shortcut on the home screen to the live feed.

Moreover, more apps will gain integration with At a Glance including Google Clock and Personal Safety. You should soon also be able to view workout stats directly from the home screen through the function.

And last but not least, At a Glance will be displaying a reminder for when the flashlight is on.

So far, 9to5Google has only spotted signs of the upgrade on the Pixel 6 series, although newer ASI releases may add all of it to older Pixel phones as well. It is worth mentioning here that none of the newer aforementioned features are live yet and there’s no indication of when they’ll be rolling out.

RELATED:

• Google to fix the game crashing wallpaper bug in Android 12L
• Upcoming Google Pixel 6a renders showcase a Pixel 6-like design
• Google offers special developer discount on Lenovo Tab P12 Pro to try Android 12L
• Some Google Pixel 4a are cracking on their own from the corner and no one knows why
• Google Pixel 6 and 6 Pro get mid month update that improves fingerprint sensor

The post Pixel 6 to soon get major ‘At a Glance’ upgrade: Bluetooth device battery, fitness info, and more appeared first on Gizmochina.

Previously, we had reported on the Google Pixel 6 series seemingly has an overrated charging capability. Now, the company has officially confirmed that its latest flagship series does not feature 30W fast charging.

According to an official blogpost, the search engine giant confirmed that its Pixel 6 and Pixel 6 pro does not feature 30W charging solution, despite it offering a separate 30W fast charger. For those unaware, the Pixel 6 series does not arrive with a charger in the box, but the company does sells a 30W fast charger. This, in turn, led many reviewers to believe that the latest premium grade handsets feature 30W charging as well.

However, Google confirmed that the Pixel 6 supports just 21W charging while Pixel 6 Pro supports only 23W charging. In the blogpost, the company added that “The charge rate at any moment is based on factors such as battery cell and system design, temperature, system usage, and state of charge.” Although, when the phone’s battery drops low, the Pixel 6 series can draw their peak 21W and 23W power from the charging brick to charge up to 50 percent in just 30 minutes.

Post half an hour, the charging rates drops to a slower pace to reach 80 percent. For the final 20 percent, the phone’s charging rates are reduced gradually even further to “help minimize degradation to preserve the lifespan of your battery.” Notably, this is in line with our previous report that covered the overrated charging capabilities.

RELATED:

• Some Google Pixel 4a are cracking on their own from the corner and no one knows why
• Google Pixel 6 and 6 Pro get mid month update that improves fingerprint sensor
• Some Pixel 6 features can be enabled on older Pixels through this Google Camera update
• Google fixes ghost dialing issue on the Pixel 6 series with a new update

The post Google officially confirms that Pixel 6 series doesn’t feature 30W charging appeared first on Gizmochina.

Google’s newly launched Pixel 6 and Pixel 6 Pro smartphones are the most impressive devices coming from the technology giant but similar to the previous models, these ones too have plenty of issues. Among them is the issue of the device randomly auto-dialing contacts in the middle of the night.

Later, the hot word detection feature of Google Assistant was found to be the culprit, and turning the feature off fixed the problem. The search engine giant quickly acknowledged the issue and has now resolved this with the latest version of the Google app which is now available in the Play Store.

According to a Pixel community manager on the /r/GooglePixel subreddit, updating to the latest Google app (12.43.18 or higher) should now fix the problem. They say that the update is rolling out on the Google Play Store. If you have disabled the “Hey Google” hotword detection feature, then it is now safe to re-enable it.

So, if you are using the Google Pixel 6 or the Pixel 6 Pro smartphone, then you should quickly update the Google app to the latest version as soon as possible to fix the ghost dialing issue on the device.

For those who are unfamiliar, some users of the newly launched Pixel series smartphones reported that even in quiet rooms, their phone would light up and say that it’s calling a  random contact from the phone’s contact list. This was happening at different times with different contacts, and some have even reported it happening on older Pixel devices.

RELATED: 

• Google Pixel 6 Pro smartphone’s screen replacement takes just a minute according to  YouTuber JerryRigEverything
• Realme’s Smart Google TV Stick will debut in Europe next month starting at €54.99
• Google loses antitrust appeal in the EU; needs to pay $2.8 billion fine
• Some Google Pixel 6 units get Camera-based Heart Rate and Respiratory Tracking
• Google PixelBook 2 laptop is not getting launched anytime soon

The post Google fixes ghost-dialing issue on the Pixel 6 series with a new update appeared first on Gizmochina.

Google recently launched its flagship Pixel 6 and Pixel 6 Pro smartphones which are touted as the best Android smartphones right now. However, they are not perfect as the premium phones have several issues.

One of the issues on the phone is slow fingerprint recognition but it seems that the tech giant has something up its sleeves to make the unlocking process a bit faster. It appears that the company is planning to introduce Face Unlock for the Pixel 6 lineup pretty soon.

Interestingly, the Face Unlock feature on the Pixel 6 series smartphones was spotted in earlier leaks but the functionality was removed when the devices were launched. Now, an XDA Developers contributor Freak07 has found references to the Face Unlock feature, hinting that the feature could be rolled out.

The feature is being referred to as Tuscany internally and it appears that Google is trying to make it more power-efficient and this could be the reason for it being pulled out from the devices ahead of getting launched.

Do note that the Pixel 6 and Pixel 6 Pro doesn’t come with dedicated hardware for face unlocking which means that even when the feature is rolled out, it will be dependent on the phone’s front-facing camera sensor.

It’s noteworthy that the presence of the code in the repository doesn’t necessarily mean that the feature will be rolled out. So, we would advise you to take this new information with a pinch of salt.

RELATED: 

• Google Pixel 6’s fingerprint reader may break if the phone runs out of battery: Report
• Google to start allowing third-party in-app payments in South Korea
• Google Pixel 6 seems to have an overrated fast charging capability, new tests reveal
• The Pixel 6 Pro propels Google into DxOMark’s top 10 phone camera ranking
• Google Pixel 6, Pixel 6 Pro teardown reveals extensive heat dissipation, poor repairability

The post Google Pixel 6 series could get Face Unlock support in future update appeared first on Gizmochina.

The Google Pixel 6 has been touted by Google as being “a new standard for mobile security”, and makes use of multiple technologies like TrustZone that are processed using a dedicated Titan M2 security chip. However, even with all of that security prowess, Google has seemingly overlooked the most basic aspect with its Pixel 6 series that keeps phones secure – the fingerprint scanner.

A Redditor recently posted a video of his Pixel 6 fingerprint unlock in action. The video quite clearly shows that the device has only one finger registered. But upon handing the phone over to his wife, he found that she was able to unlock it as well – with her unregistered fingerprint.

Other Redditors chimed in saying they’ve observed similar peculiarities, and many have begun to ask if the Google Pixel 6 series’ fingerprint hardware itself isn’t up to the mark.

This comes not long after an influx of complaints about the fingerprint sensor being frustratingly slow and even unresponsive. Google had responded by saying that the “enhanced security algorithms” are to blame as they may take longer to authenticate users’ fingerprints – quite ironic to say for a phone that gives a green light to unregistered fingerprints.

Google is yet to respond to the issue. And while we wait for the California-based tech giant to come up with something clever to say, let’s take the matters into our own hands and try to pinpoint the source of trouble.

So, the Pixel 6 series makes use of the now-dated optical in-display fingerprint scanner tech that works by reflecting light off of your finger. While it’s more economical, it’s not necessarily the most accurate and speediest.

The newer ultrasonic in-display fingerprint scanner tech first featured on the Samsung Galaxy S10 series is known to be a faster and more reliable alternative as it uses inaudible sound waves instead of light. This enables it to work quite well even through dirt, oil, grime, or water.

Had Google opted for an ultrasonic fingerprint, it’s likely that this problem would never have existed in the first place.

Another potential culprit has been pointed out by none other than the Redditors in the same post. The idea is that screen protectors may retain the fingerprint of a user on the underside and trigger phantom fingerprint detection. This may be possible but is unlikely considering a fingerprint will have to be left in the perfect location.

Regardless, Google needs to address the problem through software optimization if possible and as soon as possible. Security flaws like these, after all, don’t mean well for the image of a phone marketed as going big on security, and may even impact sales.

RELATED:

• Google Pixel 6 seems to have an overrated fast charging capability, new tests reveal
• Google Pixel 6 automatically dialled random contacts while owner was asleep
• Google Pixel Fold reportedly launching in 2022 with a less powerful camera than the Pixel 6
• Google to start allowing third-party in-app payments in South Korea

The post Google Pixel 6 can be unlocked by unregistered fingerprints in some cases appeared first on Gizmochina.

The Google Pixel 6 series smartphones have just recently launched, but soon after its release, many users have come forward with complaints regarding its fingerprint scanner. Buyers found that the device has a slow and sometimes unreliable sensor, but this might be the case due to an intended design.

Although under display fingerprint readers have been around for a while now, they were initially slower and sometimes unreliable as well. But in recent times, this difference between a regular fingerprint reader on the rear and the one under the display has more or less been eliminated. But, the search engine giant’s latest flagships are still facing criticism for what is described by many users as a slow fingerprint scanner. While it was hoped that the issue would more or less be fixed with a patch/update, official confirmation from the company has made things a bit more complicated.

According to an official tweet from Google,  the Pixel 6 features “enhanced security algorithms” that verify fingerprints. In other words, this may even cause the sensor to be delayed or even miss at times. The tweet further added that “these added protections can take longer to verify or require more direct contact with the sensor.” The company also advises users to keep their fingers clean and properly press it on of the sensor for optimum results. However, this does not address the various issues many have been facing with this sensor.

Some believe that Google using an in display optical sensor might be the issue, but there are a number of smartphones that feature this technology without these issues. But there is still one silver lining, since the company has basically confirmed with the tweet that the issue is based on software. Meaning, it might be something solvable in the near future. Although, if we can discern one thing from the official tweet, it is that Google does not consider the slow sensor as an issue that needs to be fixed.

RELATED:

• Google Pixel 6 seems to have an overrated fast charging capability, new tests reveal
• Google Pixel 6 automatically dialed random contacts while owner was asleep
• Google to start allowing third party in app payments in South Korea

The post Here’s why the Google Pixel 6’s fingerprint reader is slow appeared first on Gizmochina.

Google‘s latest Pixel 6 series models are signposted by the impressive camera setup in both models. The Google Pixel 6 Pro also got a top 10 rating in terms of its camera performance, but it seems there are still some issues relating to the stated fast charging potential of the new product. A recent test showed that the Samsung Galaxy S21 outperformed the Pixel 6 in charging speed and fingerprint recognition speed. Although the test details were not fully provided, another test has now shown that the Pixel 6 and Pixel 6 Pro’s 30W charging capability may not be entirely correct.

A wired charging test of the Google Pixel 6 seems to confirm the charging speed is quite slower than what was officially stated by Google. The official Google Pixel 6 Support page had stated that up to 50% charge could be accomplished in 30 minutes, using the Google 30W USB-C Charger with USB-PD 3.0 (which is sold separately). However multiple tests with the official 30W USB-C Charger revealed that the maximum power that was obtained from the two Pixel 6 models was 22W, with an average of 13W over the full charging cycle. The tests seem to be extensive, with some other high-power USB Power Delivery PPS plugs from Samsung, Anker, and Elecjet, all getting maximum power of 22W from the Pixel 6 and Pixel 6 Pro.

The results also show significantly higher average charging times for the Pixel 6 series compared with the Pixel 5, and also Samsung Galaxy S21. While the Pixel 5 has a 4,080mAh battery, the Pixel 6 series comes with a 5,000mAh battery. This observed drawback of the Pixel 6 series could be the result of several issues, although there had not been any reaction from Google at this time. It seems however that full disclosure of the charging cycle has not been provided by Google, although its claim of achieving 50% charge within 30 minutes seems valid from the tests.

RELATED:

• Google responds to the Screen Flickering issue of the Pixel 6 Pro
• Google Tensor has quite a lot in common with Samsung Exynos, Pixel 6 code reveals
• The Galaxy S21 floors the Pixel 6 Pro in wired charging & fingerprint speed tests
• Google unable to meet Pixel 6 Pro demand, makes waitlist for buyers
• Google releases new promo video that urges LG users to switch to Pixel 6

(source)

The post Google Pixel 6 seems to have an overrated fast charging capability, new tests reveal appeared first on Gizmochina.

Google’s latest flagship Pixel 6 Pro smartphone has been ranked by DXOMark among the top 10 powerful phones according to its camera capabilities. The DxOMark ranking is based on several performance metrics that yield a final ranking of smartphone models. The broad categories are picture quality, zoom capability, and video quality.

The Google Pixel 6 Pro, as per the DxOMark assessment, had a total score of 135, with 143 for the photo, 115 for video, and 71 for zoom. The Pixel 6 Pro had an impressive performance in all lighting conditions. It has a wide dynamic range, accommodating long-range shots via zoom, together with a great texture.

The detail preservation capacity of the Pixel 6 Pro was shown to outclass Apple’s flagship iPhone 13 Pro in the same lighting conditions. However, the overall DxOMark score puts the Pixel 6 Pro below the Mate 40 Pro, the iPhone 13 Pro, and the 13 Pro Max.

The assessment also highlighted some design areas that could be drawbacks of the Pixel 6 Pro camera setup. The narrow depth of field, especially in low light, impacts performance negatively. This design is commonly present in cameras with a large sensor. The assessment also showed that noise was observed in low-light situations.

In all, the DxOMark ranking of the Pixel 6 Pro is another credit to Google for its flagship offering.

RELATED:

• Download Google Camera 8.4 APK with new Pixel 6 Pro features
• Google Pixel 6, Pixel 6 Pro teardown reveals extensive heat dissipation, poor repairability
• Google Pixel 3 series has officially hit the end of the road with regards to software updates
• Lucky Reddit user orders Pixel 6 and gets a free upgrade to Pixel 6 Pro

(source)

The post The Pixel 6 Pro propels Google into DxOMark’s top 10 phone camera ranking appeared first on Gizmochina.