We are probably several months away from the next iPhone launch but the leaks are already flowing in frequently. Tentatively called the iPhone 13, the series is said to get a big upgrade in display in the ‘Pro’ version. Amidst this, MySmartPrice has come up with the CAD 3D renders of the iPhone 13.

As per the report, the Apple iPhone 13 will measure around 146.7×71.5×7.6mm. This, if true, will be a slight change in thickness from 7.4mm on the iPhone 12. However, the design is said to be boxy and almost similar to the predecessor.

Moving on, the renders show that the rear camera layout has a slight change in placement. The two big cut-outs, as well as two smaller ones, are placed diagonally to each other. The bigger ones are probably the camera lens while the latter is likely the LED flash and a microphone.

Also, at the front, we see three cutouts on the notch. And speaking of which, the notch looks smaller this time as seen in previous leaks. This is because the speaker unit is moved above the cameras this time. There isn’t clear info regarding the cutouts but it would most likely be an IR camera, a Dot projector, and a front-facing selfie camera.

1 of 4

The Apple iPhone 13 series of devices are said to get upgrades in 2021 like the Apple A15 chipset, improved ultrawide camera, Qualcomm X60 5G modem, storage up to 1TB, and support for Wi-Fi 6E.

As mentioned above, the biggest change would be the  LTPO display panel with a 120Hz refresh rate support on the ‘Pro’ variants.

RELATED:

• Apple Siri assistant says the next event is on April 20, iPad Pro 2021 expected
• Apple has reportedly got a new TV Stick and Amazon Echo-like speaker in the works
• Apple iPhone 11 Pro with misprinted brand logo was sold for $2,700

The post Apple iPhone 13 3D renders show the probable design of the iPhone 12 successor appeared first on Gizmochina.