A little over six months  after the Meizu Pro 6 was released, Meizu today unveiled the Pro 6S which is more or less an upgrade of the Pro 6. The Meizu Pro 6S looks very similar to the Pro 6 in terms of body design and we have got hands-on images of the device courtesy PCPOP. Let’s take a tour to see if any slight difference exist between the two flagships.

The Pro 6S adopts pretty much the same design as the Pro 6. Both smartphones were even placed side-by-side in some of the snapshots and you just can’t tell which is which just by looking at them. The Pro 6S sports same metal body as the Pro 6 and is available in four colors of rose gold, champagne gold, moonlight silver and sky gray. The Pro 6S also has the same 7.3mm thickness and weighs 163 gram just like the Pro 6. Obviously, the main differences between both devices lie in the hardwares.

On the hardware terrain, one of the major difference between the Pro 6 and Pro 6S is the rear camera sensor. The Meizu Pro 6S packs a more powerful 12MP Sony IMX386 sensor same as on the Meizu MX6, while the Pro 6 features a less powerful  Sony IMX230 sensor. The Pro 6S rear camera also comes with 1.25-micron pixel and f/2.0 aperture, custom 6P lens, zero shutter lag, ring flash, PDAF, laser focus and four-axis OIS. The camera also features multiple shooting modes such as manual mode, Pro mode and a new night mode as well.

Another major difference between both the Pro 6 and Pro 6S is the larger 3,060mAh camera crammed under the Pro 6S’ hood with  24W fast charging support, whereas the Pro 6 packs a smaller 2560mAh battery.

Aside those two differences, the Meizu Pro 6S and Pro 6 are very much similar. The Pro 6S uses the same Helio X25 chipset but with a slightly reduced temperature by 3.5 degrees celsius. The Pro 6S equally sports a 5.2-inch FHD AMOLED display with 2.5D glass on top with 10000:1 contrast ratio and 350 nits brightness and support for pressure sensitive touch.

Related: Meizu Pro 6S Camera Samples Released

Also worthy of note is that the Pro 6S only comes with a 64GB non-expandable storage whereas the Pro 6 featured a lower 32GB storage version. Another thing is that the Meizu Pro 6S carries a price tag of 2,699 Yuan ($400) which is slightly lower than the price of the 64GB variant of the Pro 6 which retails for 2,799 Yuan ($413). Remember the Pro 6S packs more features, so i’ts a case of getting more for less. Amazing, isn’t it?

The post Meizu Pro 6S Hands-On Images: Spot The Difference! appeared first on Gizmochina.

Meizu will finally release the much anticipated Pro 6S smartphone today after up to six months in the works. The Meizu Pro 6S is likely coming with an upgrade just on the camera end and battery life, else the device would be similar to the Pro 6, according to words from Meizu officials.

Ahead of the event, the Meizu Pro 6S has already appeared on popular online mall Jingdong (JD.com) where early reservations are already opened for the device. The Pro 6S real image seems to have made its first outing via the reservation poster and it indeed bears a design consistent with the Pro 6. The Pro 6S uses a metal body design with the antenna band on the top and bottom edges. The device is also said to come with entire network support but unfortunately still doesn’t support storage expansion, meaning no microSD slot. The device is also going to be available in various colors.

Since the device will see just a few upgrade from the Pro 6, the price would be the major focus of many. The Jingdong reservation affixed a price tag of 2699 Yuan ($399) on the Pro 6S. The price is for the 4GB RAM + 64GB storage version of the Pro 6S, perhaps the top-end version as there is likely a 32GB ROM version which may likely be cheaper.

Read More: Meizu Pro 6S Camera Samples Released

On the specs, the Pro 6S features a 5.2-inch display with 1080 pixels resolution and comes equipped with the MediaTek Helio X25 chipset. The phone’s appearance on AnTuTu recently reveals a 21MP rear camera sensor although that may be wrong. The Pro 6S may likely use the same 12MP Sony IMX386 sensor as the Meizu MX6 with support for four axis optical image stabilization. The battery capacity is also increased to 3,060mAh.

The device is said to go on sale on November 7 after today’s launch event. For 2,699 Yuan, would you contemplate buying the Pro 6S?

The post Meizu Pro 6S Poster Reveals Pricing Before launch appeared first on Gizmochina.

As the November 3 launch date of the Meizu Pro 6S draws nearer, more details about the expected device are propping up. The latest is an AnTuTu benchmark record for the pro 6S which give some clear cut out details of the Pro 6S’ specs.

According to the AnTuTu data, the Meizu Pro 6S is powered by a MediaTek Helio X25 (MT6797T) chipset along side the Mali-T880 GPU. The device also features on the memory aspect, a 4GB RAM and 32GB of internal storage space.

The Meizu Pro 6S also packs the same rear camera sensor size as the Pro 6, with a 21MP rear camera listed. Meizu yesterday released some sample images said to have been shot by the Pro 6S’ camera and they were simply amazing. They even when ahead to compare them with those shot by an iPhone 7 and the difference was really clear with the Pro 6S’ images looking clearer. So it is also possible that a very powerful sensor is at play on the Pro 6S’ rear camera, although the AnTuTu data didn’t reveal that. The device is also listed as sporting a 5MP front-facing camera and would run on Android 6.0 Marshmallow, perhaps with Meizu’s custom FlyMe OS hovering on top.

Read More: Meizu M5 Spotted on TENAA with 6GB RAM

Additionally, the Meizu Pro 6S is listed as sporting a Full HD display a.k.a 1920 x 1080 pixels which is likely to be on the same 5.2-inch display as the Meizu Pro 6.

The post Meizu Pro 6S Appears on AnTuTu, Key Specs Detailed appeared first on Gizmochina.