Over the past few days, we have been treated on several occasions with leaked renders of Meizu‘s expected Pro 7 flagship. The leaked renders have all been consistent in showcasing the design the device will come with. The leaked renders are still streaming in, this time around we have got multiple renders of the Meizu Pro 7 which seems to have been produced by a Chinese protective case maker. The protective casing comes in red and black colours. 

The renders were shared by a Chinese tipster on Weibo and it shows the protective shell was custom-made for the Pro 7. The case is touted to offer 360-degree protection, that is all sides of the device will be adequately protected. While we have seen almost all that the Pro 7 has to offer in terms of design, these leaked render answers some minor questions yet to be attended to. One of such is the presence of a 3.5mm audio jack on the Pro 7. The power button has a roughened surface which will likely be to help differentiate it from the volume rockers. You may want to ask if that is relevant. Well, it is for people like me who sometimes gets confused in the dark which of the button does what.

Read More: Meizu Pro 7 Real Photo Leaks, You’ll Be Excited!

The renders also reveal the likelihood of a USB Type-C port featuring on the Pro 7. The secondary display and rear dual cameras are also visible at the rear and up front, the disappointing large bezels are unfortunate additions we’ll have to deal with on the Pro 7. You can check out some more photos of the Meizu Pro 7 encased in attractive red and black plastic protective shell from below.

(source)

The post Meizu Pro 7 Renders Leak, Encased in Red & Black-Colored Protective Shell appeared first on Gizmochina.

The Meizu Pro 6 was released in May of last year. It was the first phone to feature the top and bottom antennae design that Apple replicated on the iPhone 7. Six months later, it was followed by the Pro 6 Plus, and the month after that saw the release of the Pro 6s. A leaked schedule already told us to expect the Meizu Pro 7 in June and we have also seen a couple of leaked images and specs.

The team at DBS Designing have come up with their own renders of what the Meizu Pro 7 should look like. First, lets run through the specs.

The device sports a 5.5-inch Quad HD AMOLED display, 6GB of RAM, and either 64GB or 128GB of storage. The processor is definitely the Mediatek X30 and there is a 5000mAh battery inside too with support for Super mCharge. The main camera is a 16MP shooter and the front camera is 8MP.

For the design, they have settled for something similar to the upcoming Galaxy S8. The display is curved on both sides and the top and bottom bezels have been shrunk considerably. DBS have managed to squeeze a fingerprint scanner on the lower bezel. How comfortable that will be when it comes to real life usage remains to be seen.

READ MORE: Meizu’s Flyme 6 Stable version Release, Features Camera Search Tools

The rear is not so much different from that of the Pro 6 though. The lens style is different and the LED flash is now shaped like a pill. There is a USB Type-C port on the bottom and speaker grilles flanking it on both sides.

What do you think of the design?

(Source)

[embedyt] http://www.youtube.com/watch?v=duAIT-nHi78[/embedyt]

The post DBS Designing Gives The Meizu Pro 7 Life With Fresh Renders appeared first on Gizmochina.

Last year, Meizu released a series of smartphones with not so spectacular specs lineup but all that changed when the Meizu Pro 6 Plus was released. It seems Meizu is intent on taking the bar a tad higher this year as the Meizu Pro 7 specifications have leaked so early in the year.

The Meizu Pro 7 isn’t a new entrant to the rumor mills, the device was earlier rumored as coming last year but wasn’t launched eventually. It should be noted that the Pro7 was among the devices listed in the leaked Meizu product schedule for 2017. And if that schedule is to be taken seriously, the Pro 7 should debut in June this year with a MediaTek Helio X30 chip onboard.

The leaked specification appeared in form of a Powerpoint document with images purported to be those of the device. The image, however, resembles those of the Pro 6 Plus, so we doubt if they are really for the purported Pro 7 or if the Pro 7 even exists.

Be that as it may, the leak specifies that the Meizu Pro 7 would feature a titanium body as well as a 5.7-inch 4K display (resolution of 3840 x 2160 pixels) with support for AOD display screen technology. The flagship is also rumored as packing a rear camera with 12MP Sony IMX362 CMOS sensor. The camera is said to retain the ring flash featured on the Pro 6 and Pro 6 Plus.

Read More: Meizu Announces Release Date of the 128GB version of the Meizu Pro 6 Plus

On the SoC, the Pro 7 is rumored as coming with an Helio X30 chip with more than two storage versions. The base version is expected with 4GB RAM + 64GB storage and it is expected with a 3299 yuan price tag. The second version expected to feature 6GB RAM + 128GB storage has a rumored price of 3,599  yuan. Yet, there is a third with 8GB RAM + 128GB storage rumored to be priced at 3799 Yuan. We’ll need to take these leaked specifications and photos with a pinch of salt because they are too outrageously good to be true.

(source)

The post Meizu Pro 7 Features Leak: 4K Display, Titanium Body & More! appeared first on Gizmochina.

Seems today’s headlines would be dominated by the Meizu Pro 7 which is expected as Meizu’s next flagship device. Just after the rumor that the Pro 7 would likely come packing Huawei’s latest Kirin 960 chipset, a set of renders of what is said to be the Meizu Pro 7’s.

Well for the avidance of doubt, these set of renders are not known if they are those of the official Pro 7, but they seem to be those of a fan-generated concept design. We still don’t know for sure what the real Meizu pro 7 looks like and we are not even certain if the flagship would actually look anything similar to these renders.

The design looks quite similar to that of the Xiaomi Mix, using a design pattern that consists of the front being entirely the display. There is no physical button on the front but looks like there are capacitive keys at the sides. The device is said to be 5.62 inches in size, with a resolution of 2160 x 1080 pixels (2 : 1). Also, the front-facing camera is hidden and there is an on-screen fingerprint recognition technology, powered by Sonavation.

The back part of the device is said to be made of metal and comes as a flat design. There are also antenna bands at the upper and lower edges running on a horizontal plane. The device also seem to feature a round flash lying under the rear camera.

The post Meizu Pro 7 Concept Design Renders Leak appeared first on Gizmochina.