Moondrop has unveiled a new 3-inch active HiFi speaker called MM3A, built for desktop use. The speaker goes on sale July 22, priced at 699.9 yuan, or some $103, per pair for its launch window before rising to a regular price of 999.9 yuan (~ $147). 

Moondrop MM3A Specifications

The MM3A has an original cabinet design. Moondrop shaped the enclosure with multiple curves and no parallel surfaces, a low-diffraction approach that cuts down on internal standing waves. The result is a compact speaker that fits comfortably on a desk without dominating the space.

Connectivity on the MM3A includes USB, optical, 3.5mm AUX, and Bluetooth inputs, so it works with computers, phones, and other audio sources. Moondrop also built in support for parametric EQ, letting users fine-tune the sound through a companion app or a PC.

Inside, the speaker pairs a 3-inch aluminum cone driver for mids and bass with a silk dome tweeter for highs. Moondrop added two passive radiators mounted on opposite sides of the cabinet, using rear cavity pressure to push the low end further than the compact size would normally allow. A fully digital DSP crossover and a dynamic enhancement algorithm handle the audio processing, working together to keep bass output controlled and consistent.

The MM3A adds to Moondrop’s growing lineup of active speakers and audio gear. The brand recently brought DSP tuning to its KADENZ earphones, and its Space Travel 2 Ultra earbuds and Armature Art 24 IEMs show the same focus on custom acoustic tuning that now shows up in the MM3A’s desktop form factor.

With its curved cabinet, flexible connectivity, and app-based EQ control, the MM3A gives desktop listeners a compact speaker built around precise sound tuning rather than raw output.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Moondrop launches MM3A desktop speakers with multi-curved cabinet and DSP tuning appeared first on Gizmochina.

Chinese audio brand Moondrop has launched the new Moondrop Edge 2 wireless headphones. Open for pre-order in its home country, the Edge 2 are 499 yuan (~ $70) over-ear wireless headphones that improve noise cancellation by 24.4% over the original Edge. 

According to Moondrop, the headphones block out 95.5% of ambient noise below 1kHz and use AI-powered ENC (environmental noise cancellation) with beamforming microphones and a built-in NPU chip, so your voice stays clear even in loud, busy places.

The headphones are available in two color options — black and white, and black and gray — and can be ordered now through JD.com.

Moondrop Edge 2 Specifications

Under the hood, the Edge 2 uses a 40mm dynamic driver with a composite diaphragm, which is a wooden dome paired with a flexible suspension edge. Moondrop says this combination, along with a high-flux neodymium magnet and an ultra-lightweight CCAW voice coil, keeps distortion low while delivering a full, rich sound.

On the wireless side, the headphones support LHDC V5 for high-resolution audio streaming. They are also compatible with LDAC, both of which offer significantly better audio quality than standard Bluetooth codecs.

Moondrop promises up to 50 hours of battery life when paired over Bluetooth. And for situations where you’d rather skip wireless entirely, the Edge 2 supports USB wired audio with what the company calls a “zero-latency” mode, useful for gaming or video editing where audio sync matters.

The Edge 2 includes capacitive wear detection, meaning the headphones can automatically pause playback when you take them off and resume when you put them back on. Users can turn this on or off through the Moondrop app.

Speaking of the app, it offers a full DSP (digital signal processing) interface with a professional-grade graphical equalizer. There’s also an online tuning community built right in, where users can download preset tuning configurations from others or upload their own.

The headband uses a stainless steel telescopic hinge made with MIM powder metallurgy and CNC engraving. The ear pads are non-parallel, filled with memory foam, and are user-replaceable.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Moondrop launches Edge 2 wireless headphones with 50 hours of battery, LHDC V5 for lossless sound appeared first on Gizmochina.

Moondrop has officially announced its latest flagship in-ear monitor (IEM), the Armature Art 24, a high-density 24-driver balanced armature earphone built around an unusually complex single-sided acoustic design. The IEM is priced at 6,999 yuan (~ $1030) and is available starting today.

Moondrop Armature Art 24 Specifications

At the center of the Armature Art 24 is its driver layout. Each side packs 24 balanced armature units, split into 16 bass drivers, 4 mid-high drivers, and 4 ultra-high drivers. Such a packed setup ensures tighter control over density, dynamics, and phase alignment across the frequency range.

The low end is handled by what Moondrop calls its SUPERWOOFER patented module, built around 16 balanced armatures working together as a unified bass system. Mid and high frequencies are managed through multiple aluminum-magnesium diaphragm balanced armatures, while ultra-high frequencies are handled by four dedicated tweeter units designed for extended detail and faster response.

To support this dense internal architecture, the earphones rely on precision 3D-printed acoustic channels. These are designed to reduce phase interference and maintain timing accuracy across multiple driver groups. 

Moondrop is also using its patented progressive time-difference simulation to reproduce a more natural spatial decay and reverberation pattern.

As for the design, the Armature Art 24 uses a 0.78mm 2-pin detachable cable system and ships with interchangeable plugs for both 3.5mm single-ended and 4.4mm balanced outputs. The cable itself is a hybrid build combining 19 cores of single-crystal copper and 19 cores of pure silver, wrapped in a braided outer layer for durability.

Inside the box, users also get three sets of ear tips, including traditional silicone, UC tips, and a new ATF foam-silicone option designed for better isolation without excessive pressure or heat buildup.

On the technical side, the IEM has a frequency response range of 7Hz to 35kHz, with an effective IEC-standard range of 20Hz to 20kHz. Sensitivity is rated at 119dB/Vrms, and total harmonic distortion is kept at or below 0.7% at 1kHz. Moondrop tuned the product using its PopAvg-DF target with a slight bass lift, measured in its free-field lab using a B&K5128C head simulator.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 

The post Moondrop’s premium Armature Art 24 launches with 24 drivers in each earbud appeared first on Gizmochina.

Moondrop has launched the Space Travel 2 Ultra (MD-TWS-043), a new addition to its budget-friendly TWS lineup. Priced at $39.99, the earbuds will be sold through Moondrop’s Amazon store and authorized distributors.

Noise Cancellation and Audio Quality

The Space Travel 2 Ultra offers a 36% improvement in effective noise cancellation area compared to the previous model. Unlike traditional hybrid ANC designs, it uses a feedforward-only ANC system to avoid bass distortion while providing wideband coverage.

At its core is a 13mm patented single-magnetic annular planar driver, using N55 magnets and ultra-thin CCAW coils for high energy efficiency, superior treble extension, and low distortion. The tuning follows Moondrop’s VDSF Target Response, resulting in a natural sound profile with less than 0.05% total harmonic distortion.

Codec and Connectivity

The earbuds support LDAC, AAC, and SBC, delivering up to 24-bit/96kHz high-resolution playback. Bluetooth 6.0 ensures faster response and more stable connections.

Battery life is rated at 7 hours per earbud (AAC) and 24 hours with the charging case.

Smart Features

The Space Travel 2 Ultra includes multiple intelligent functions:

• Seamless switching between mono and stereo use.
• Dual-device connectivity for easy pairing with two devices at once.
• AI Yuki Beta 0.1 for adaptive sound tuning.
• Custom touch controls for ANC, transparency, and playback.
• One-button EQ and DSP graphic interface for tuning.
• Online tuning community for sharing and downloading EQ profiles.
• 55ms low-latency game mode.
• Built-in NPU for hardware-level AI ENC, improving call clarity.

Comparison with Previous Models

• Space Travel 2 Ultra: 13mm planar driver, patented single-magnetic annular planar design, LDAC/AAC/SBC, wideband ANC with 36% improvement, Bluetooth 6.0, NPU-based AI noise cancelling, 7+24 hours battery life.
• Space Travel 2: 13mm dynamic driver with beryllium-plated dome diaphragm, AAC/SBC codec support, wideband ANC with 31% improvement, Bluetooth 6.0, NPU-based AI noise cancelling, 7+24 hours battery life.
• Space Travel: 13mm dynamic driver with titanium dome diaphragm, AAC/SBC codec support, wideband ANC, Bluetooth 5.3, ENC for calls, 4+12 hours battery life.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source)

The post Moondrop Launches Space Travel 2 Ultra TWS Earbuds with Advanced ANC, LDAC, and AI Features appeared first on Gizmochina.

Moondrop has unveiled its latest audio product, the Block true wireless earbuds. Designed for comfort, the Block sits on the outer ear, avoiding the plugged-in feeling often associated with in-ear designs.

It has a 13mm Bass-Enhanced Dynamic Driver with bio-diaphragm technology. It promises high-resolution, punchy audio, suitable for multiple genres. They support Bluetooth V5.4 for reliable connectivity and lower latency. Additionally, it has dual-microphone beamforming ENC that provides high-quality noise reduction for crystal-clear calls.

The earbuds are tuned using the B&K5128 HATS system for accurate sound reproduction, and the VDSF tuning provides a natural timbre. They include a 55ms low-latency game mode, ideal for gaming. The seamless monaural-binaural switching allows easy use of one or both earbuds. They offer 6 hours of battery life, with an additional 15 hours provided by the charging case.

Pricing & availability

The Moondrop Block TWS earbuds are available in three colors: Pink, white, and Black. The earbuds will be released on August 9, 2024, at 17:00 (GMT+8) for $19.99 USD.

In other news, EarFun has also launched the Air Pro 4 in-ear headphones, priced at $90. They offer high-quality audio with Qualcomm’s QCC3091 SoC, supporting aptX Lossless and LDAC codecs. They feature QuietSmart 3.0 Adaptive Noise Cancellation, six microphones, and AI algorithms for effective noise reduction and clear call quality.

(Source)

The post Moondrop Block true wireless earbuds with VDSF tuning, 55ms low-latency mode launched for $20 appeared first on Gizmochina.

Remember the good old days of smartphones? Back when every phone wasn’t just a glass-and-metal brick designed by a committee. When manufacturers dared to be different and made phones as unique as their target audiences.

Those days seem increasingly distant now. However, some companies like Nothing are still trying to keep that spirit alive. Nothing made a splash in the smartphone market with a phone that was affordable, transparent (literally!), and refreshingly free of bloatware—a breath of fresh air in a market filled with predictable-looking phones.

Now, Moondrop, known for its high-fidelity audio equipment, has entered the smartphone scene with the MIAD 01. Not to anyone’s surprise, the MIAD 01 is a phone designed with one very specific user in mind: the audiophile who craves exceptional sound quality on the go. But what makes it special? Let’s take a closer look.

Dual DACs and Headphone Jacks

The MIAD 01’s defining characteristic is its unwavering commitment to high-fidelity audio. Unlike most modern smartphones that have ditched the headphone jack altogether, the MIAD 01 boasts not one, but two: a standard 3.5mm jack and a 4.4mm balanced jack. 

The 3.5mm caters to casual listeners with standard headphones, while the 4.4mm caters to audiophiles who use balanced headphones, known for their superior signal separation and clearer sound.

But the real highlight of the phone is its dual Cirrus Logic MasterHiFi DAC chips. Digital-to-analog converters (DACs) translate digital audio signals into analog signals that headphones can use. 

Most phones have a single, fairly basic DAC. But the MIAD 01 has dual high-fidelity DACs coupled with support for 32-bit audio processing which can significantly improve sound clarity and detail compared to phones with standard audio hardware.

Theoretically, 32-bit processing allows for a wider dynamic range, meaning the quietest and loudest parts of your music are captured with greater fidelity. It also potentially reduces noise levels, leading to a cleaner, more transparent listening experience. 

Additional Audio Features

Moondrop doesn’t stop at dual DACs. The audio circuit boasts a 6-layer gold-sinking PCB designed to dissipate heat and minimize electrical interference. Then there’s an independent Low-Dropout Voltage Regulator (LDO) to ensure a clean and stable power supply for the audio components.

The phone also features a 100-level hardware DAC volume control. This allows for precise volume adjustments without compromising audio quality, a feature often missing in standard phone volume controls.

Audiophiles will also appreciate the ability to tinker with EQ settings through a dedicated app, allowing for granular control over the sound signature. However, the benefits of dual DACs and high-fidelity audio processing depend on the quality of the headphones or earphones you use. Lower-end audio products might not fully exploit the MIAD 01’s capabilities.

Mid-Range Specs

Outside the realm of audio, the MIAD 01 settles for a more conventional mid-range phone experience. It features a 6.7-inch 1080p OLED display with a 120Hz refresh rate, a decent but not groundbreaking spec for the price point. 

The phone is powered by a mid-range MediaTek Dimensity 7050 processor sufficient for everyday tasks but unlikely to impress power users. The camera system consists of a 64MP main sensor and an 8MP ultrawide sensor, again falling within mid-range expectations. Moondrop themselves acknowledge that the camera is not a highlight of the phone quoting “It’s not good, but it works.”

The phone comes pre-installed with Android 13, free of bloatware and intrusive data collection. However, it lacks Google Mobile Services (GMS) certification out of the box, which means users will need to sideload essential apps like Gmail, Maps, and the Play Store. 

Keeping all things powered is a 5000mAh battery that supports 33W USB-PD charging. The phone also has 5Gbps USB 3.1 connectivity. 

Design-wise, the MIAD 01 is a thick boy that measures 9.15mm at its thinnest and weighs 202 grams. But Moondrop has managed to create a phone that looks unique with the raised bar on the top housing the camera module along with MIAD 01 branding with few orange accent patterns. The remaining half has a textured finish that also contributes to the look of the phone. 

Price and Availability

The Moondrop MIAD 01 is priced at CNY 2499 (~ $349), placing it firmly in the mid-range segment. It is currently available for purchase through select e-commerce partners and authorized stores only in China. Details on its global availability have yet to be announced. 

Also, here’s a quick recap of its specs:

Conclusion: In its own Niche

The MIAD 01 occupies a unique niche in the smartphone market. For audiophiles seeking an unparalleled mobile listening experience, its dual DACs and dual headphone jacks are undeniably appealing.

However, the phone’s mid-range processing power, potentially underwhelming camera system, and lack of pre-installed Google Mobile Services (GMS) could be dealbreakers for some. Additionally, as a new player in the smartphone space, Moondrop’s long-term software support capabilities are also uncertain.

We have already published our review of the Moondrop MIAD 01. You can watch it below:

The post Moondrop MIAD 01: The phone for audiophiles, but what makes it special? appeared first on Gizmochina.

Moondrop, primarily known for its high-end in-ear monitors and earbuds, has launched the MIAD 01, its first foray into smartphones. As expected from an audio brand, the phone focuses on audio rather than being specs-heavy. Let’s get into the specs, features, and price of Moondrop MIAD 01 here. 

Moondrop MIAD 01 Specifications

The MIAD 01 runs on the MediaTek Dimensity 7050, a mid-range chipset suitable for everyday tasks but unlikely to impress power users.  It comes with 12GB of LPDDR4X memory and 256GB of UFS 3.1 storage. You can further expand the storage via a microSD card slot up to 2TB.

On the front, the phone features a large 6.7-inch curved OLED display with a 120Hz refresh rate. The resolution is standard 1080p and there is a 32MP camera for selfies. 

 The rear features a 64MP primary sensor, likely accompanied by a depth sensor for portrait mode effects. Keeping the lights on is a 5000mAh battery with support for 33W fast charging.

Things are intriguing when it comes to audio. It features a unique combination of dual headphone jacks – a 4.4mm balanced jack for audiophile-grade connections and a standard 3.5mm jack for wider compatibility. The balanced jack offers a higher output voltage compared to the 3.5mm jack.

Moreover, the phone has a quad-channel DAC setup powered by Cirrus Logic MasterHIFI DACs. With this, you can expect excellent audio quality with a high dynamic range and low signal-to-noise ratio. 

These specifications are impressive, even surpassing what some dedicated portable DAC/amps offer. The audio circuit is further enhanced by a 6-layer gold-sinking design, an independent power supply, and 100-level hardware volume control. Moondrop has also included an Audio Center app for additional sound customization through DSP functionality.

Price and Availability

The Moondrop MIAD 01 is priced at 2499 RMB (approximately $345). The price makes it a compelling option for audiophiles on a budget seeking a phone with exceptional audio quality. 

But, it’s unclear if the phone will be available internationally. It’s only out in China for now, where it will go on sale starting April 25.

Related:

• OnePlus 12 or iQOO 12: which one is the right choice for you?
• iQOO Z9 Turbo Debuts In China With Snapdragon 8s Gen 3, 16GB RAM, And More
• OnePlus Watch 2 Nordic Blue Edition with Scandinavian-inspired design launched in Europe & UK
• EV company Polestar releases its first smartphone with special AI features
• Xiaomi 15 series: Next-gen flagship may feature 50MP telephoto, periscope camera & Snapdragon 8 Gen 4

The post Audio brand Moondrop has launched its first smartphone with dual (4.4mm, 3.5mm) audio jack, mid-range MediaTek processor appeared first on Gizmochina.

Chinese company Moondrop has something lurking on the horizon. The company has posted teasers of its new upcoming phone on social media, including Instagram and X. The device looks stylish, but the company seems to be focusing on other aspects of the smartphone. Read on to find out.

The device looks to be focused on music, but the leak suggests a daily driver launch.

The first image showcases the phone itself, accompanied by a caption that emphasizes its ability to function as a high-fidelity (HiFi) music player. Moondrop highlights the phone’s slim design and boasts that it offers both a 3.5mm and a 4.4mm headphone jack, catering to a wider range of audiophile headphones. The inclusion of these jacks is a rarity in today’s smartphone landscape, and suggests Moondrop is prioritizing sound quality for music lovers. The caption also mentions smooth operation for daily use, hinting that the phone won’t just be for music, but a fully functional daily driver.

The second image teaser seems to allude to a unique personalization feature, showcasing the phone with a “waifu cover” that transforms into a beautiful poster when zoomed in. “Waifu” is a term used in anime fandom to describe a fictional character a person has strong feelings for, and it suggests the phone might offer anime or other niche customization options. Who knows? The only other thing deductible from the first two posts

The third teaser simply ends with “If you’re interested in…”, leaving fans to speculate about other potential features. What do you guys think? Would you be interested in a smartphone with Hi-Fi audio functionality built in?

RELATED:

• BYD’s Latest Teaser Video Showcases the Incredibly Stylish Seal 06 DM-i, Debut Slated for 2024 Beijing Auto Show
• New Realme Narzo 70 series phone coming soon, teasers promise faster charging, lag-free performance
• REDMAGIC Magnetic VC Cooler 5 Pro now available at a discounted price at GeekWills
• Xiaomi 13 Ultra Premium Camera Phone is now only $799
• How to add custom GIFs and stickers to WhatsApp

(Via)

The post Moondrop’s Teaser Indicates a Smartphone with Hi-Fi Audio and both 3.5mm and 4.4mm Headphone Jacks appeared first on Gizmochina.

Moondrop is a well-known brand for its high-end IEMs and earbuds. But the company might soon be venturing into uncharted territory, as suggested by their latest teaser.

Moondrop surprisingly shared a teaser for its new smartphone on its website a few days ago. The device is called MIAD 01 and is listed as a “5G Hi-Fi Mobile Audio Device”  with the tagline “explore the integration of art and reason” on a new ‘Phone’ section.

A quick glance at the phone’s outline reveals a power button and volume controls on the left side, and it looks like the device will have a sleek, flat design. However, beyond this, Moondrop has kept mum about any further details regarding the smartphone.

Since Moondrop is an audio-first brand, we expect the phone to have like a built-in Hi-Res DAC and a 3.5mm headphone jack. This could possibly be complemented with high-end wireless codecs such as Sony’s LDAC, LHDC, and aptX Lossless. But none of these are confirmed, it’s just our guess.

If these features make it to the Moondrop phone, Sony’s Xperia 1 V might be its closest competitor. The phone offers a headphone jack, hi-res audio support, and a range of wireless codecs like LDAC and aptX HD.

Furthermore, Moondrop is known for its daring design choices, often showcasing distinctive and visually striking aesthetics in its earbuds and charging cases. So, it’s reasonable to expect the MIAD 01 phone to follow suit and bring out a unique identity in the market.

Unfortunately, the teaser page offers no launch date, leaving us in the dark about when to expect the device. But rest assured, we’ll continue to provide updates on this “Hi-Fi” phone as more information becomes available.

Related:

• YouTube App for Apple Vision Pro is on the roadmap, says company
• Get latest Oneplus 12 Phone for $699 on Geekwills
• Get $100 Off on Vivo X100 Pro at Giztop
• Best VR / AR Headsets of 2023 – Gizmochina

The post Audio brand Moondrop teases its first “HiFi” smartphone, “MIAD 01” appeared first on Gizmochina.

Moondrop, a well-known electro-acoustic brand from China known for its high-quality in-ear monitors, has launched a new and improved version of its mid-fi segment, called the Moondrop Blessing 3. This model is the third generation of the popular “Blessing” series and boasts a premium build with six advanced hybrid drivers on each side.

The highlight feature of the earbuds is the newly developed 3D-printed acoustic cavity structure, along with the innovative HODDDUS technology (Horizontally Opposed Dual Dynamic Drivers Unit System) that creates a physical band-pass filter, which allows for acoustic customization.

Moondrop has carried over the physical and electronic crossover technology from its previous generation and has made further improvements to enhance sound performance for the Blessing 3 IEM. With these improvements, the mid-high response and lower-end rumble have been effectively enhanced, ensuring an impressive and satisfying sound experience for audiophiles. The low-impedance, high-sensitivity design of the earbuds ensures that users can enjoy a high-resolution audio performance from any source. 

The Moondrop Blessing 3 IEM features ear shells made of a high-quality, skin-friendly resin material that is lightweight and ergonomically designed to ensure a comfortable listening experience for long period. The earpiece has a stunning appearance, with stainless steel metallic face covers that add a touch of premium style. 

Moondrop has collaborated with top brands in the industry for 3D printing that ensures the earbuds are of the highest quality. The IEM is designed with precise crossovers, proper driver implementation, and accurate craftsmanship, resulting in a consistent full-frequency band response. Overall, the Moondrop Blessing 3 is an eye-catching, beautifully designed earbud that delivers outstanding sound quality in a stylish earpiece.

The Moondrop Blessing 3 comes with a high-quality stock cable and features an interchangeable cable design with universal 0.78mm 2-pin connectors. With a single-ended 3.5mm termination plug, the earbuds can be connected to any source for universal compatibility. Despite the improved design, architecture, and added features, the Moondrop Blessing 3 is available at the same price as the previous models, making it an excellent choice at $319.99. For more information, check out the product details.

Key Features:

• Six-driver hybrid configuration on each side.
• Dual 10mm dynamic driver units along with four high-performance balanced armature driver units on each side.
• Specially developed 3D-printed acoustic cavity structure
• HODDDUS (Horizontally Opposed Dual Dynamic Drivers Unit System) for horizontal placement of dual dynamic driver units
• Specially designed to maintain the magnetic structure and the airflow of both drivers, to produce a powerful lower-end response
• Improved energy conversion efficiency and reduced nonlinear distortion
• Clean lower-end performance

The post Moondrop launches its latest Advanced Hybrid IEM: Moondrop Blessing 3 appeared first on Gizmochina.