Meizu has been released the new firmware to fix the noise problem in the Meizu MX2 Android smartphone.

MX2 Experience firmware (Flyme 2.0.4)
Applicable models: MX2 software Size: 177M
MD5: eadd06f35501ae8eae40fdf5b7962c99
SHA1: 149080cb727a16be0f54e5493fae56f1244bb813

Download 1
Download 2

Note:
1) Hong Kong version of the the MX2 smartphone firmware upgrade mainland version, may result in the application data is not compatible;
2) Please ensure that the mobile phone battery is greater than 20% before the upgrade;
3) before the upgrade, please back up the phone data through Flyme account;

The upgrade process:
1) Flyme 2.0.4 system firmware copied to the root directory of memory card – Shutdown – plus key upgrade the system by pressing the power and volume;
2) After the success automatically boot into the system;
3) Go to Settings – About phone, view the software version Flyme 2.0.4, description of the firmware upgrade successfully;

Change log:
1) repair the micro-channel noise problem;
2) set the camera’s metering optimized, noise reduction, low-light imaging results, adjust the white balance, optimizing the front camera imaging results;
3) Add the through software calibration gravity sensing function;
4) The new USB quick charge function (in Settings – Accessibility, off by default);
5) to optimize the speed and accuracy of GPS positioning;

The post Meizu released MX2 firmware to fix the problem appeared first on Gizmochina.