Xiaomi unveiled MIUI 12.5 Enhanced Edition at the Xiaomi MIX 4 launch event. Within one and a half months, the company has finished the rollout of this software to the first batch of eligible devices in China. Hence, it has now announced its plans for the second batch.

According to the official announcement post on Xiaomi Community China, a total of 7 smartphones are part of the second batch to receive the MIUI 12.5 Enhanced Edition update. Almost all of these handsets are Redmi Note models, except for one.

MIUI 12.5 Enhanced Edition Second Batch Devices

• Redmi Note 8
• Redmi Note 9 4G
• Redmi Note 9 5G
• Redmi Note 10 5G
• Xiaomi Mi 10 Youth Edition
• Redmi Note 9 Pro 5G
• Redmi Note 10 Pro 5G

The above-listed phones are scheduled to start receiving ‘Stable Beta’ builds from October 8. If it all goes well, the rollout for all users could happen by the end of next month itself.

Having said that, the firm does say that the update rollout plan may change due to various factors. But at the end of the day, the handsets mentioned above should get the latest version of MIUI sooner or later.

On the other hand, all other smartphone brands are set to release a new version of their mobile software based on Android 12. However, Xiaomi is yet to announce anything regarding it.

RELATED:

• Xiaomi disqualifies multiple MIUI Beta testers in China
• ‘MIUI Pure Mode’ protects users from malicious apps
• Users disagree over Xiaomi India’s MIUI tweet
• MIUI gets a dedicated R&D bugs status page

The post Redmi Note series to get MIUI 12.5 Enhanced Edition update in October appeared first on Gizmochina.

Xiaomi launched the Redmi 9T at the beginning of this year. This phone is originally called Redmi Note 9 4G in China. It is also known as Redmi 9 Power in India. Six months after its release, the Redmi 9T has finally started receiving the Android 11 update.

The Redmi 9T debuted with MIUI 12 based on Android 10 though it was launched in early 2020.  Despite being a newer smartphone, Xiaomi neither rolled out Android 11 nor MIUI 12.5 update soon after its release. Instead, it is getting last year’s Android only now.

Currently, the Android 11 update for the Redmi 9T is live for the following regional variants.

• Global – V12.0.1.0.RJQMIXM
• Turkey – V12.0.1.0.RJQTRXM
• Indonesia – V12.0.1.0.RJQIDXM
• Taiwan – V12.0.1.0.RJQTWXM

Even for these regions, the update is in the Stable Beta phase right now. In simpler words, it is bring rolled out in batches like any other OTA system update. Hence, some units may receive the update later than others.

We also expect the remaining regional variants to get the update in the coming days. That’s not all, the original Redmi Note 9 4G as well as the Indian Redmi 9 Power should also bag the Android 11 update very soon.

Last but not least, the Redmi 9T, Redmi Note 9 4G, and Redmi 9 Power will be also updated to MIUI 12.5, followed by MIUI 13.

RELATED:

• Xiaomi Mi TV 4C 32 launched in India with same features as the older 32-inch models
• Xiaomi leads European smartphone shipments for the first time in Q2 2021: Report
• Xiaomi Mi 11 Lite NE in works for India, Mi 11T series to feature OLED screen
• Xiaomi builds a Mecha Fighter from 3 dismantled Redmi K40 Game Editions

The post Redmi 9T bags Android 11 update in multiple regions appeared first on Gizmochina.

Although Xiaomi sells expensive smartphones, the company’s cheaper handsets are popular worldwide. In fact, in India. Xiaomi is known as Redmi among commoners, thanks to value for money phones like Redmi A series, Redmi number series, and Redmi Note series. The latter series has now achieved a huge milestone, as per Xiaomi.

Yesterday, ahead of the Mi 11 global launch event, Xiaomi India announced a brag-worthy achievement on its various social media handles.

The Chinese smartphone maker revealed that it has shipped over 200 million units of Redmi Note series phones globally to date. This data is sourced from the firm’s own ‘Xiaomi Data Center’.

It is not surprising to learn that the global shipments of the Redmi Note series have exceeded 200 million units since its inception. This series has been the heart of Xiaomi’s product lineup ever since it was introduced.

Redmi Notes have been unbeatable in their price segment for a very long time. However, that began to change when realme entered the scene. But being an established product lineup, they are still as popular as they were before.

That said, Xiaomi is known for announcing its milestones ahead of releasing new devices. Hence, we think the Redmi Note 10 series is just around the corner. The upcoming series is reported to include two models, namely Redmi Note 10 and Redmi Note 10 Pro. As of now, we are only aware of the storage configurations and color variants of these handsets.

RELATED:

• After POCO C3, POCO M2 budget smartphone clocks over a million sales in India
• MIUI 12.5 Global is Official: Features and rollout details
• Xiaomi Mi TV Q1 75-inch launched: 4K, QLED, 360° Bluetooth remote, Google Assistant & more!

The post Redmi Note series has exceeded 200 million units in global shipments appeared first on Gizmochina.

At the end of last month, Redmi, the sub-brand of Xiaomi launched Redmi Note 9 series in China. The series consists of three smartphones and these devices have been on sale for the past 13 days. Within this period, the company managed to sell 1 million units.

Xiaomi initially debuted the Redmi Note 9 series earlier this year in India. But the Redmi Note 9 models launched in China are different devices altogether. This series includes two 5G phones (Redmi Note 9 5G, Redmi Note 9 Pro 5G) and a single 4G handset (Redmi Note 9 4G).

Now, less than two weeks (13 days to be exact) from them being going on sale, Redmi accomplished to sell over 1 million units of these smartphones. The brand revealed its new achievement on Weibo.

In case you do not know, Xiaomi’s Redmi number, Redmi A, and Redmi Note series of handsets have always been global bestsellers. For instance, the company has sold over 140 million units of Redmi Notes worldwide as of November. These phones are popular because of the value they offer for the price.

That said, although the new Redmi Note 9 series is exclusive to China, the same phones are expected to release with different branding in global markets. The Pro variant is already available in Europe as Mi 10T Lite with a 64MP primary camera. This handset will be also launching as Mi 10i in India. Similarly, the 4G model will soon go official as Redmi 9 Power and Redmi 9T with an additional camera.

UP NEXT: Redmi Watch hands-on: A solid Budget smartwatch with NFC

The post Redmi Note 9 series sales crossed 1 million units within 13 days in China appeared first on Gizmochina.

Last week, Redmi, the sub-brand of Xiaomi launched an exclusive Redmi Note 9 series in China. This series consists of three models namely Redmi Note 9 4G, Redmi Note 9 5G, and Redmi Note 9 Pro 5G. A tweaked version of the first model has already debuted as POCO M3 in certain global markets. Now, according to new findings, the original Chinese phone with a different camera setup will be also launching as Redmi 9 Power in India and Redmi 9T in other international markets.

The POCO M3 launched earlier last week in Europe with a refreshing design. The same phone with a different rear design debuted as Redmi Note 9 4G a few days later. The former is currently restricted to Europe, whereas the latter is only available in China. But as per multiple findings, both of them will be soon made available in other markets as well.

POCO M3

First and foremost, the POCO M3 is codenamed ‘citrus’ and it bears the following model numbers.

• M2010J19CG
• M2010J19CT
• M2010J19CI

The last model number in the above-list belongs to the Indian variant, which has been now listed on Google Play Console. Hence, we can expect it to launch soon in the country.

Lastly, MIUI 12 builds are only live for the Global and EEA versions of this handset. Therefore, the phone’s exact future availability is still a mystery except for India.

EDITOR’S PICK: POCO M3 Review: The Phone to beat in the Budget segment

Redmi Note 4G / Redmi 9T / Redmi 9 Power

On the other hand, Redmi Note 4G is codenamed ‘lime’ and it comes with the following model numbers.

• M2010J19SC
• M2010J19SG
• M2010J19ST
• M2010J19SI

In the above list, the first model number is of the Chinese variant of this device, which is sold as Redmi Note 4G. This smartphone features a triple camera setup consisting of 48MP (wide) + 8MP (ultra-wide) + 2MP (depth).

The next three are of international variants and the last one, in particular, belongs to the Indian version. It was found in the Google Play Console database a few hours back and interestingly, it will be sold as Redmi 9 Power.

Whereas, the other two model numbers will launch as Redmi 9T. These three models will sport a quad-camera setup, unlike the Chinese variant. The only difference is that these two handsets will include an additional 2MP macro camera.

Having said that, POCO is yet to reveal the availability of POCO M3 for more markets. Similarly, Xiaomi/Redmi is yet to confirm launch dates for Redmi 9T and Redmi 9 Power.

UP NEXT: POCO India confirms that it’s working on the ‘POCO F Series’; Time for resurrection?

The post Redmi Note 9 4G will launch as Redmi 9 Power in India appeared first on Gizmochina.

On Thursday, Redmi unveiled the Xiaomi Redmi Note 9 4G, Redmi Note 9 5G, and Redmi Note 9 Pro 5G. The Eurasian Economic Commission (EEC) has recently approved a Redmi phone with model number M2010J19SG. The ECC certification (spotted by popular tipster Mukul Sharma) suggests that the device could be heading to the global market soon.

The ECC listing of the M2010J19SG has not revealed any information on its specs. However, a recent report has revealed that this model may launch as the Redmi 9T in global markets. Moreover, it is believed that this device will be arriving with a quad-camera setup instead of the triple camera system found on the Redmi Note 9 4G of China.

The Redmi 9T is reportedly coming with a 48-megapixel (main) + 8-megapixel (ultrawide) + 2-megapixel (macro) + 2-megapixel (depth) quad-camera system. In comparison, China’s Redmi Note 9 4G is equipped with a 48-megapixel (main) + 8-megapixel (ultrawide) + 2-megapixel (depth) triple camera system. It is advisable to wait for further reports to know whether the M2010J19SG will be arriving to global markets as the Redmi 9T.

Editor’s Pick:  Redmi Watch up for pre-orders from Giztop

Redmi Note 9 4G Specifications

The Redmi Note 9 4G has a 6.53-inch IPS LCD panel that produces a Full HD+ resolution of 1080 x 2400 pixels. The Snapdragon 662 mobile platform is fuelled by up to 8 GB of RAM and up to 128 GB of storage. The MIUI 12 based Android 10 OS runs on the device.

It has an 8-megapixel camera for capturing selfie shots. The phone houses a 6,000mAh battery with 18W charging. It has a side-facing fingerprint reader.

UP NEXT: Redmi Note 9 Series (China) teardown reveals Camera, Cooling mechanism, & more

The post Redmi Note 9 4G EEC certified; Global launch could be nearing appeared first on Gizmochina.

On Nov. 24, POCO announced the POCO M3 smartphone for global markets. On Thursday, Redmi unveiled the Redmi Note 9 4G, Redmi Note 9 5G, and Redmi Note 9 Pro 5G. According to the information found through the Federal Communications Commission (via tipster Sudhanshu Ambhore), China’s Redmi Note 9 4G (M2010J19SC) will be rebranded as Redmi 9T in global markets. While the Note 9 4G has a triple camera system, the Redmi 9T is expected to house a quad camera setup.

A screengrab of the chart shared by the tipster shows the comparison between the POCO M3 and the upcoming Redmi 9T. The M2010J19CG and M2010J19CT model numbers belong to the POCO M3 that has a triple-camera system that comprises a 48-megapixel main camera, 2-mgeapixel depth-of-field lens, and a 2-megapixel macro camera.

On the other hand, the Redmi 9T moniker is associated with model numbers M2010J19SG and M2010J19ST. The listing shows that this phone has a quad-camera setup that includes a 48-megapixel primary shooter, an 8-megapixel ultrawide lens, a 2-megapixel depth-of-field lens, and a 2-megapixel macro camera.

Editor’s Pick: Redmi Watch up for pre-orders from Giztop

In comparison, the Redmi Note 9 4G that debuted in China came with a triple camera setup that has a 48-megapixel primary lens, an 8-megapixel ultrawide shooter, and a 2-megapixel depth-of-field lens. To summarize, the POCO M3, Redmi Note 9 4G, and Redmi 9T have the same hardware specifications and they only differ in the camera department.

All three phones are equipped with common specs such as 6.53-inch displays with waterdrop notch and they have 8-megapixel front-facing cameras. They are driven by Snapdragon 662 chipset and 6,000mAh batteries with 18W charging support.

UP NEXT: Redmi Note 9 Series (China) teardown reveals Camera, Cooling mechanism, & more

The post Redmi 9T (M2010J19SG) for global markets could be a tweaked version of China’s Redmi Note 9 4G appeared first on Gizmochina.

Xiaomi launched the Redmi Note 9 Series in China yesterday. The lineup has two 5G devices- Redmi Note9 5G, Note9 Pro 5G, and a Note9 4G version. Today, a teardown of the entire series by popular AIO Technology shows the difference between the devices. And as teased by Lei Jun earlier, the devices bring improvements in performance, battery, camera, and more.

Rear Shell, Display

As reported by SeekDevice(via GSMArena), the teardown begins by taking off the back covers. As per the reports, both 4G and 5G version of Redmi Note 9 series has plastic shell. And, the 5G version is made to look like AG glass. However, the Note 9 Pro 5G reportedly has a real AG(Anti-Glare)Glass cover.

1 of 2

Talking about the display, we already know that the entire series uses LCD displays. The teardown additionally reveals that all of them are made by TCL CSOT, and have the connecting interface fused to the back of the display. Moving on, the rear shell of 4G and 5G Redmi Note 9 have fingerprint sensors, and antennas attached to them. The 5G version has more antenna contact points which is obvious.

Processor, Cooling

The top cover of the Note 9 series covers the Processor and Camera modules. Among this, the NFC on the Note9 Pro 5G is integrated into the top cover. Beneath it are the SoC along with memory and other components. The 3.5mm audio jack on the 4G version is sorted to the board while others have it integrated. Additionally, all the devices have Infrared sensors(IR blaster) sorted to the board.

1 of 3

Besides, the processors are covered with metal cover, copper foils, and a thermal paste beneath the surface. Removing them reveals the CPU, memory(UFS 2.2, DDR4 RAM). Talking about the cooling, Note9 4G has a heat dissipation film attached to the rear panel but the 5G versions have it on the fuselage(body). While the mid-frame of the devices have more heat dissipation film, the Note9 Pro 5G has a copper tube running in the mid-frame for extra cooling.

EDITOR’S PICK: Apple iPhone 12 Pro teardown reveals the majority of South Korean parts

Camera module

The camera modules on the 4G and 5G devices are different. The Note9 4G has a rectangle layout and is it at the far left while two 5G devices have a circular layout at the center. Interestingly, the Note9 Pro 5G has an additional protection cover and three more screws to hold the arrangement. The flash on 4G version is fused to the back cover. But the 5G version has it on the layout and the 5G Pro version has it sorted to the board.

1 of 2

The cameras themselves are reportedly similar in the 4G and 5G base version with the difference being a depth of field(2MP depth) and macro lens(2MP Macro) on the former and latter. The Redmi Note9 Pro layout has the biggest 108MP HM2  module and auxiliary sensors.

Battery, and other parts

Removing the big ribbon cable that separates the bottom and upper part reveals the battery. All of them are protected by adhesives. As we all know the batteries on 4G, and two 5G versions are 6,000, 5,000, and 4,820mAh respectively.

1 of 3

The bottom part is also protected by a cover. Removing it reveals the USB-C, Speaker, vibrator, and 3.5mm jack on the 5G versions. The report says the speaker and vibration motor are similar across the models but the 5G versions have a Z-Axis linear motor.

UP NEXT: Redmi Watch up for pre-orders from Giztop

The post Redmi Note 9 Series(China) teardown reveals Camera, Cooling mechanism, & more appeared first on Gizmochina.

After several leaks, teasers, and rumors, Xiaomi has officially launched three new redmi Note 9 series smartphones in China. The launch event which was held today saw the tech giant take the wraps off three amazing models – the Redmi Note 9 Pro, Redmi note 9 5G, and the Redmi Note 9 4G.

The Redmi Note 9 Pro is obviously the star product among the trio as it is equipped with several impressive hardware including the latest Samsung HM2 camera sensor. The premium device is equipped with double-sided Gorilla Glass 5 as well as a 3D four-curved arc design.

The Redmi Note 9 Pro sports a 6.67-inch LCD display with an FHD+ resolution of 2400 x 1080 pixels. The display also features support for 120Hz refresh rate and up to 240Hz touch sampling rate. The display utilizes the punch-hole design which has an aperture of only 3.8mm. The display which is certified by TUV Rheinland for low blue light level also has several software features such as eye protection mode 3.0, step-less color temperature adjustment, sunscreen 3.0, etc

In terms of performance, the Redmi Note 9 Pro is the first model to be launched in China powered by a Snapdragon 750G mobile processing platform, which uses Samsung’s 8nm LPU process. The process has an improved performance level of 7% over the 8nm LPP. The CPU adopts the Kryo 570 architecture of the same generation as the Snapdragon 865. Among them, two A77 large cores have a frequency of up to 2.2GHz, and six A55 high-efficiency core clocked at 1.8GHz. By the way, this is the first time that Qualcomm’s 7 series platform will utilize the flagship A77 architecture processor

Further, the premium Note 9 Pro uses a three-dimensional liquid cooling system. The second-generation ultra-thin heat pipe and multi-layer graphite at the front and rear ensure efficient two-way heat conduction on the XY axis of the mobile phone, which can reduce the CPU core temperature by up to 5°C.

In terms of photography, the Redmi Note 9 Pro is equipped with a Quad camera setup but what makes it stands out is that the main sensor is the world’s first third-generation 108-megapixel camera sensor Samsung HM2.

Samsung HM2 has the outsole and high pixels of a flagship camera, and the unique 9-in-1 pixel binning technology can achieve super-large pixel night scene photography. The sensor has a 1/1.52 inch ultra-outsole, which is larger than the 1/2 inch of the current mainstream flagship camera 48MP and 1/1.7 inch of the 64MP, thus resulting in a better imaging effect.

It continues the ultra-high resolution of HMX, and the captured photos can still be clearly visible even if they are zoomed in several times, which is convenient for post-cutting and re-composition.

With hardware Remosaic technology, it can quickly produce 108MP ultra-clear photos, and the camera speed is 3.8 times faster than Xiaomi CC9 Pro, which greatly improves the filming rate of 100-megapixel photos. The device also comes with Super night Scene 2.0 which makes night time shot awesome.

In addition to the 108-megapixel main camera, Redmi Note 9 Pro is also equipped with an 8-megapixel ultra-wide-angle lens, a 2-megapixel macro lens, and a 2-megapixel portrait depth-of-field lens. The four lenses can cover a variety of shooting scenes.

REDMI NOTE 9 5G

The Redmi Note 9 5G adopts the same design language as the Redmi Note 9 Pro but has a side-mounted punch-hole located at the top left corner of the display. However, there are marked differences in the hardware. For one, the Note 9 5G is powered by a MediaTek Dimensity 800U processor which is also equipped with a 5G modem.

REDMI NOTE 9 4G

The Redmi Note 9 4G has the same specifications as the POCO M3 which was launched for the global market recently. The device weighs 198 grams and is 9.6mm thick. The device packs a massive 6000mAh battery and is powered by a Qualcomm Snapdragon 662 chipset. It is available in 4GB+128GB, 6GB+128GB, 8GB+128GB and 8GB+ 256GB options.

The Redmi Note 9 4G packs a side-mounted fingerprint sensor and has IP52 splash resistance.

Redmi NOTE 9 Pro, Redmi NOTE 9 5G and Redmi NOTE 9 4G pricing & Availability

As for the pricing, the Redmi Note 9 Pro starts at 1599 yuan (~$243)

• Redmi note 9 Pro 5G 6GB+128GB version – 1299 yuan ($197)
• Redmi Note 9 Pro 5G 8GB+128GB version – 1499 yuan ($227)
• Redmi Note 9 Pro 5G 8GB+256GB version – 1699 yuan ($258)

For the Redmi note 9 4G, the 4GB +128GB version is priced at 999 yuan (~$151).

• 6GB+128GB version -1099 yuan (~$167)
• 8GB+128GB version – 1299 yuan (~$197)
• 8GB+256GB version – 1499 yuan. (~$227)

The post Redmi Note 9 5G, Redmi Note 9 Pro and Note 9 4G launched in China appeared first on Gizmochina.

Xiaomi is gearing up for the launch of the Redmi Note 9 series in China tomorrow. The company will likely unveil the following three models- Redmi Note 9 5G, Redmi Note 9 Pro 5G, and Redmi Note 9 4G. The 4G variant has already launched as the POCO M3 globally yesterday. While one of the 5G variants is likely to darn the Redmi Note 9T 5G naming Globally, the 4G variant has now visited Singapore’s IMDA certification under ‘Redmi’ branding suggesting a global launch.

The latest tip comes from Mukul Sharma. As he says, a Redmi Mobile Phone with model number M2010J19SG appears on the IMDA database. Now, if you recall, a device with a similar model number(M2010J19SC) visited TENAA recently. This is believed to be the Redmi Note 9 4G in China. Additionally, a device with similar model number M2010J19CG turned out to be the POCO M3 for Global markets.

That said, the 4G device under Redmi branding appears at a time when the 5G variant has also received Malaysia and Singapore’s certifications. It is likely to come under Redmi Note 9T 5G moniker with MediaTek’s Dimensity 800U SoC. Anyway, talking about the 4G variant, it’s TENAA renders in China show a lot of similarities to the POCO M3.

Redmi Note 10 4G Specifications(Expected)

However, it doesn’t have the big camera shade and leather-like finish at least looking from the images on TENAA. It features a 6.53-inch display with 2400×1080 resolution. From the launch of POCO M3, it’s clear that the 2.0GHz CPU listed on TENAA is the Snapdragon 662 SoC. For cameras, you get a 48MP main lens, two 2MP sensor on the rear, and an 8MP selfie shooter up front.

Other features expected are a 6,000mAh battery with 22.5W fast charging, 4G, Wi-Fi, Bluetooth, GPS, 4/6GB RAM, 64/128GB storage, side-mounted fingerprint sensor, MIUI 12 based on Android 10, and more. Let’s wait for the official launch in China tomorrow to know more about the device.

UP NEXT: Redmi Watch is launching tomorrow in China

The post Redmi M2010J19SG gets IMDA certification; could launch as Redmi Note 10 4G Globally appeared first on Gizmochina.

It’s a no-brainer that Redmi Note 9 Series will break cover on November 26 in China. Ahead of this, the company has been teasing the device frequently. Today, the VP of Xiaomi, Lu Weibing has shared a post on Weibo that shows invitations sent out to media. And the letter is accompanied by an actual “sword”.

The official post(via Sina Technology) on Weibo shared by Lu Weibing shows a series of images with an invitation letter and a big box. The invitation letter has the Redmi Note 9 logo, and the “Three Musketeers” slogan confirming the three models. Further, it reads, “There are thousands of schools in the arena, and there are thousands of moves. But the great heroes do not ask for unique secrets. They should carefully practice one move and one move to benefit the people”(Google translated).

As for the sword, bloggers who received it have shared a slogan on Weibo. It says “the brave will win if you meet on a narrow road”(Google Translated). That said, reports say that the sword is basically an eight-sided Han Sword. Apparently, it is and is long, narrow, and thicker than the four-sided ones. This suggests that the sword might be a collectors’ edition resembling the ones from the Han Dynasty of China. You can take at the sword and invites below:

1 of 4

In case you don’t know, Redmi Note 9 series will likely darn the name Redmi Note 9 4G, Redmi Note 9 5G, Note 9 Pro 5G. A recent listing on Jingdong(JD.com) suggests that Xiaomi might call the 5G models as Redmi Note9 5G and Redmi Note9 Pro 5G.

Redmi Note 9 Series Specifications(Expected)

The top of the line Redmi Note9 Pro 5G will likely be a tweaked version of the  Xiaomi Mi 10T-Lite. Additionally, we know that the Redmi Note 9 Pro 5G has a 6.67-inch IPS LCD FHD+ 120Hz display, Snapdragon 750G chipset, a 4,820mAh battery with 33W fast charging. Further, the device is likely to have a 108MP rear camera, stereo speakers, 3.5mm audio jack, NFC, IR blaster, and Z-axis linear motor.

Talking about the sibling, Redmi Note 9 5G’s TENAA renders showed that the device will have a similar rear panel as Redmi Note 9 Pro 5G but a top-left punch display. It is likely to feature a 6.53-inch IPS LCD FHD+ display,  MediaTek Dimensity 800U, 4GB/6GB/8GB RAM, 64GB/128GB/256GB internal storage, 48MP triple camera setup, 13MP punch-hole selfie camera, MIUI 12 based on Android 10, NFC, 5,000mAh battery, and 22.5W fast charging.

As for the 4G variant of the Redmi Note 9, from the TENAA listing, looks a lot similar to the upcoming POCO M3. It will likely feature a 6.5-inch FHD+ display, Snapdragon 662 SoC, 48MP camera, 6,000mAh battery with 18W fast charging.

Nevertheless, the Redmi Note 9 series will go on sale on the launch day, and will likely start from 1000 yuan($152).

UP NEXT: Redmi Note 9 Pro 5G official render released to showcase rear design

Latest Gizmochina Review: Poco M3 Unboxing and Hands on:

The post Xiaomi sends out Redmi Note 9 Series’ invites to media with a ‘sword’ appeared first on Gizmochina.