5G is being rolled out in countries all around the world and users are able to experience near gigabit speeds on their smartphones. But 5G was designed to bring about a more comprehensive upgrade to devices which includes significant improvements in voice and video calls too. VoNR (Voice over New Radio) is the next-generation version of VoLTE (Voice over LTE) and OPPO, in partnership with MediaTek and Ericsson has conducted the first VoNR Voice and Video call.

The current 5G networks are built around the existing 4G LTE infrastructure (Non-standalone networks). So your smartphones with 5G data support still use VoLTE for voice calls. However, network operators will soon start deploying SA (Standalone) network architecture for 5G networks which allows carriers and device makers to enable VoNR calls. OPPO’s official press release stated that the VoNR call made with its customized Dimensity 1000L smartphone (likely Reno3) had significantly “lower latency, improved sound quality and picture quality”. The company added that this will eventually lead to an “elevated overall experience for users”.

The 5G VoNR call was successfully carried out under a 5G SA network provided by Ericsson at its headquarters in Stockholm, Sweden. OPPO adds that “after dialing, the two phones connected almost instantly and then seamlessly switched to a high-definition video call with a single keypress”.

OPPO has become one of the first smartphone brands to successfully test VoNR services on its smartphone. With network operators all set to deploy 5G over SA architecture in the second half of 2020, VoNR should become an important feature of 5G phones in the coming years.

UP NEXT: OPPO Ace2 teaser poster confirms Snapdragon 865 SoC and quad rear cameras

The post OPPO successfully conducts first 5G VoNR Voice & Video call with a customized Reno3 appeared first on Gizmochina.

The OPPO Reno3 has finally gotten a global release about three months after the 5G version was announced in China. The phone largely keeps the same design as the Chinese variant but with little changes. It also comes with pretty different internals.

The Reno3 Global Version has a 6.4-inch 2400 x 1080 AMOLED display. There is a waterdrop notch at the top for a 44MP selfie camera. The bezels have been slimmed down considerably save for the chin which is thicker than the others.

Inside the Reno3 is a MediaTek processor just like the 5G version but this is the Helio P90 processor and not the Dimensity 1000L. There is 8GB of RAM and 128GB of storage which can be expanded by up to an additional 256GB.

There are four rear cameras – a 48MP primary rear camera with an f/1.8 aperture, a 13MP f/2.4 telephoto camera with, an 8MP f/2.4 ultrawide angle camera, and a 2MP monochrome depth sensor. OPPO says the phone can actually take 108MP photos thanks to software. The phone also has 5x hybrid zoom and 20x digital zoom. There is an Ultra Dark Mode for capturing photos in low-light, a video bokeh mode, and even a macro mode even though it doesn’t have a macro camera.

OPPO has included a 4025mAh battery with support for VOOC 3.0. There is a USB Type-C port at the bottom flanked on one side by the speaker grille and on the other side by a microphone and audio jack. The phone also has stereo speakers with Hi-Res Audio and Dolby Atmos. There is a fingerprint scanner under the display.

The Reno 3 Global Version ships with ColorOS 7 based on Android 10. The phone weighs just 170 grams and is 7.9 millimeters thick. It is available in Midnight Black and Auroral Blue and will ship with a free p[air of earphones and a pre-applied s. There is no info yet on price and availability.

UP NEXT: OPPO pushes forward with Global Expansion amidst Viral Outbreak

(Source)

The post OPPO Reno3 gets a 4G global version with an Helio P90 chipset appeared first on Gizmochina.

Come next month, OPPO’s Reno3 series will get a new member, a new leak has revealed. The new phone will join the Reno 3 5G and the Reno3 Pro 5G OPPO announced last month.

About a week ago, a new phone with model number PCLM50 was seen on TENAA’s database with nearly similar specs as the Reno3 5G but a different processor and a different primary rear camera.

According to Digital Chat Station, the OPPO PCLM50 will launch as the “Reno3 5G Power Edition” (this is a loose translation of the phrase. He adds that the phone will come in nice colors and should launch next month.

The TENAA listing says the phone has a 6.4-inch AMOLED display with a 2400 x 1080 resolution. It is powered by a 2.4GHz processor which is most definitely the Snapdragon 765G. It will have 8GB of RAM and 128GB or 256GB of expandable storage.

The Reno 3 5G Power Edition will have four rear cameras in a 48MP + 8MP + 2MP + 2MP configuration. It will also have a 32MP selfie camera. There is a fingerprint scanner under the display and a 3935mAh (4025mAh) battery under the hood.

TENAA says it will be available in white, black, and yellow, and it will run Android 10 out of the box.

While there is no info with respect to its price, we presume the Reno3 Pro 5G Power Edition may have the same price tag as the standard Reno3 Pro when it launches.

UP NEXT: OPPO’s smartwatch will have ECG function

(Source)

The post OPPO PCLM50 to launch as Reno3 5G Power Edition, launches next month appeared first on Gizmochina.

It is barely a month since the launch of the V (PDCM00/PDCT00)) and the Reno3 Pro (PCRM00/PCRT00) by OPPO. Both are upper mid-range 5G smartphones that pack incredible specs. Now, the Chinese company is set to announce a third mid-range 5G smartphone. The full specs of the device, which has the model number OPPO PCLM50, has been published by TENAA.

The OPPO PCLM50 has a 6.4-inch screen like that of the Reno3. It is an AMOLED panel and it has a resolution of 2400 x 1080. There are no images attached to the listing, so we cannot tell if it is curved or if it has a notch or a punch hole. What we can confirm is that it has an in-display fingerprint scanner.

There is a 2.4GHz octa-core processor inside the phone which is most likely the Snapdragon 765G 5G processor. The phone will have only one RAM variant – 8GB, and will be available with 128GB or 256GB of non-expandable storage.

OPPO has given the phone four rear cameras too just like the Reno3 series. The main camera is a 48MP sensor that is paired with an 8MP sensor that most likely has an ultrawide lens and two 2MP cameras. We cannot say if one of the 2MP sensors is a depth-capturing camera while the other is a macro camera. However, it is important to state that the Reno3’s two 2MP sensors are a black and white portrait camera and a retro portrait style camera, so it is possible OPPO will use the same lens for that of the OPPO PCLM50. You also get a 32MP selfie camera.

The OPPO PCLM50 has a 3,935mAh battery just as the Reno3 series, so its rated capacity should be 4,000mAh. The phone will ship with Android 10 out of the box with ColorOS7 on top. TENAA says it measures 160.3 x 74.3 x 7.96 millimeters and weighs 180 grams. The colors listed are White, Black, and Yellow.

Unlike the Reno3 and Reno3 Pro, this new OPPO phone only supports SA and NSA 5G Band 41 and Band 78. There is no support for band 79.

We do not know when this new device will be announced but it should be around the corner.

UP NEXT: Leak reveals OPPO Find X2 will have a 120Hz QHD+ display

The post TENAA: Full specs of OPPO PCLM50 published; might be another Reno 5G phone appeared first on Gizmochina.

Few days ago, OPPO had launched the OPPO Reno3 series of smartphones in China. The Reno3 and Reno3 Pro phones were made available on reservations until today in China. On Dec. 27, the company had confirmed that the Reno3 series had met with 1.5 million registrations. Starting from today, the Reno3 and Reno3 Pro phones are for available for purchase in the home market.

OPPO Reno3 and Reno3 Pro Specifications

The OPPO Reno3 and Reno3 Pro are respectively equipped with a 6.4-inch and 6.5-inch AMOLED displays. The Reno3 has a waterdrop notch whereas the Pro edition features a punch-hole on the display. The Reno3 and Reno3 Pro offer full HD+ resolution of 1080 x 2400 pixels and 20:9 aspect ratio. Both phones posses front-facing cameras of 32-megapixel. The ColorOS 7 based Android 10 OS runs on both devices.

Editor’s Pick: Smartphone maker Oppo is rumored to launch a Smart TV named Oppo TV

The rear side of the OPPO Reno3 Pro has a quad camera setup that includes an OIS assisted 48-megapixel Sony IMX586main lens, a 13-megapixel telephoto with 2x optical zoom, an 8-megapixel ultrawide sensor and a 2-megapixel monochrome lens. The Reno3 Pro is driven by Snapdragon 765G mobile platform.

The OPPO Reno3 has a quad camera system featuring a 64-megapixel main lens with OIS, an 8-megapixel ultrawide lens, a 2-megapixel monochrome lens and a 2-megapixel depth sensor. The smartphone draws power the from the MediaTek Dimensity 1000L chipset. Both devices are packed with 4,025mAh batteries that carry support for VOOC 4.0 Flash Charge technology. Both smartphones come with dual mode 5G, Bluetooth 5.0, Wi-Fi 802.11ac, GPS and USB-C. Both phones lack support for 3.5mm audio jack.

OPPO Reno3 and Reno3 Pro Pricing

The Reno3 comes in two flavors such as 8 GB RAM + 128 GB storage and 12 GB RAM + 128 GB storage. These models can be respectively availed for 3,399 Yuan (~$487) and 3,699 Yuan (~$530). Its color editions are Sunrise Impression, Moonlight White, Moonlight Night Black and Blue Starry Night.

The Reno3 Pro has two variants like 8 GB RAM + 128 GB storage and 12 GB RAM + 256 GB storage. Both variants are respectively priced at 3,999 Yuan (~$573) and 4,298 Yuan (~$616). Sunrise Impression, Misty White, Moonlight Night Black and Blue Starry Night.

UP NEXT: Oppo F15 smartphone teased to go official in India next month

The post OPPO Reno3 and Reno3 Pro available for purchase in China appeared first on Gizmochina.

OPPO’s Reno series is all set to get a refresh tomorrow, at the official Reno3 5G launch event in Hangzhou, China. The Reno3 5G and Reno3 Pro 5G models will be officially announced tomorrow alongside the company’s new OPPO Enco Free TWS earbuds. With their launch tomorrow, OPPO would also officially label the Reno series as the smartphone lineup with one of the shortest product cycles ever! After all, this would be the third-generation model, with the first-gen device being announced just 10 months ago!

Despite having a 5G phone in the market – the OPPO Reno 5G, the Reno3 5G duo will be the pioneering the company’s growth in this emerging market. Both phones are expected to be mid-range with a few premium features and will ditch the pop-up camera design of its predecessors.

Since the OPPO Reno3 5G and the Reno3 Pro 5G differ quite significantly, let’s take a look at what to expect from each device individually.

OPPO Reno3 5G Design & Specs (Expected)

The OPPO Reno3 5G will be what the Redmi K20 was in the K20 series. It will bring 5G, an AMOLED display, a quad-camera setup, and a thin sub-8mm body at a cheaper price tag than the Pro model.

In terms of design, the Reno3 5G and its Pro sibling will differ quite significantly on the front. The Reno3 5G will feature a flat 6.4-inch Super AMOLED FHD+ display with a waterdrop notch on top. If you know, motorized camera setups ensure you have a full-screen display, but they have a drawback. Pop-up camera-equipped phones are heavier and thicker than traditional front camera solutions, like a waterdrop notch. OPPO is giving priority to a slimmer and comfortable form factor on the Reno3 5G and hence, you get the waterdrop notch on its display.

At the back, things are very similar to the ‘Pro’ version. We can expect a quad-camera setup on the top left corner with the bottom two cameras sharing the same sub-housing. This is what differentiates the Reno3 with the Pro version, which has all the four cameras within its pill-shaped camera housing. The words ‘Ultra Steady’ are written beside the quad-camera solution, which confirms the phone will have some sort of video feature like the ‘Super Stable’ mode on the OnePlus 7 series.

1 of 3

In terms of specs, the quad-camera setup is expected to feature a 64MP primary shooter with an 8MP wide-angle sensor, and two other 2MP sensors, likely for Macro and bokeh. On the front, you can expect a 32MP shooter to take care of your selfies.

Inside, the OPPO Reno3 5G is confirmed to feature the Dimensity 1000L 5G processor. We can expect Mali-G77 GPU to be paired with the CPU for a pretty good graphics performance. There should be an 8GB RAM + 128GB ROM variant alongside a high-end 12GB RAM + 128GB ROM model. A large 4025mAh battery should take care of the power requirements with the 30W VOOC 4.0 fast charging technology.

OPPO has already confirmed that both, the Reno3 5G and the Reno3 5G Pro models will feature a 360° surround antenna design to better implement 5G connectivity. Both phones will support 5G SA/NSA (standalone / non-standalone) networks.

As for the pricing, the 8GB RAM + 128GB model of the Reno3 5G is rumored to start at 3,199 Yuan ($458) while the 12GB RAM + 128GB model could be priced at 3,599 Yuan ($515).

Editor’s Pick: OPPO RENO Ace Gundam review: not just Gundam, but 90Hz display & 65W fast-charge

OPPO Reno3 Pro 5G Design & Specs (Expected)

OPPO Reno3 Pro 5G is going to be the star of the launch event tomorrow. The phone will feature a beautiful curved 6.5-inch display on the two sides, kind of like the Galaxy S10. I mentioned the Galaxy S10, and not the OnePlus 7T Pro here simply because it shares one another feature that’s present on the S10 – a punch-hole camera. The OPPO Reno3 Pro 5G is confirmed to feature a punch-hole camera on the top left corner of the display. It looks like punch-hole cameras are gaining traction in the premium smartphone segment with the likes of the Redmi K30 5G, Vivo X30 Pro 5G, and even the upcoming Realme X50 featuring one, or even two, punch-hole shooters on the display. Note that the display will feature a high 90Hz refresh rate.

The Reno3 Pro 5G will also come with a slim profile, measuring just 7.7mm in thickness and 171 grams, a far cry from the 9mm thick and 190+ gram weight of the Reno2 Z or even the OPPO Reno 5G models. To make things really interesting, OPPO has confirmed that the phone will feature a 4025mAh battery with 30W fast charging too, in this slim form factor. At the back, the quad-cameras will be arranged vertically, in a pill-shaped design.

It is expected that both, the OPPO Reno3 5G and the Reno3 Pro 5G will ditch the 3.5mm headphone jack. To recall, the OPPO Reno 5G model didn’t have this dedicated jack, but it made a comeback with the Reno2 Z. Even the Pro model is expected to feature an in-display fingerprint solution. There should be four colors available at launch: Misty White, Sunrise Impression (Blue-red gradient), Blue Starry Night, and Midnight Black.

1 of 4

The quad-cameras at the back should feature a 48MP primary camera, with an 8MP shooter (likely wide-angle), another 13MP sensor (telephoto likely), and a 2MP shooter (possibly for macro or bokeh). According to a recent Geekbench listing, the OPPO Reno3 Pro 5G, aka PCRMOO scored 2847 and 7686 in the benchmark test. It didn’t reveal the processor inside but OPPO has already confirmed that it will use the Snapdragon 765G octa-core chipset, the same one that powers the Redmi K30 5G.

Both phones are expected to run on ColorOS 7 based on Android 10.

The OPPO Reno3 Pro 5G’s 8GB RAM + 128GB ROM model is rumored to start at 3699 yuan ($529) and it could go up to 4199 yuan ($601) for the 12GB RAM +256GB top-end variant.

Reservations for both the devices are already up in China and have crossed 500,000 registrations already.

The Reno3 5G and the Reno3 Pro 5G will be announced tomorrow. So we are less than 24 hours away from getting official details from the company.

UP NEXT: Oppo Enco Free true wireless buds hands-on images leak online ahead of launch tomorrow

The post OPPO Reno3 5G and Reno3 Pro 5G Rumor Roundup: All We Know about OPPO’s new 5G Phones appeared first on Gizmochina.

The OPPO Reno3 5G and Reno3 Pro 5G smartphones are scheduled to go official on Dec. 26. Both phones are now up of reservations in China. The listings on OPPOShop.cn and JD feature the official renders of the four color editions of the Reno3 and Reno3 Pro handsets. In the past week, the Reno3 Pro has appeared in couple of live shots. Today, a Chinese tipster has shared new real-life images of the Reno3 Pro phone to reveal its amazing design.

The OPPO Reno3 Pro 5G has an impressive screen that curves towards its left and right edges. The size of the display is 6.5 inches and it offers 90Hz refresh rate. The AMOLED screen is integrated with an in-screen fingerprint reader. At its top-left corner is a small punch-hole for the 32-megapixel selfie camera. The phone promises a tall aspect ratio of 20:9 as it supports 1080 x 2400 pixels full HD+ resolution. As it can be seen, the display is surrounded by very slim bezels which indicates that it will offer a high screen-to-body ratio.

The left edge of the Reno3 Pro 5G features the volume button. Its right spine has a power button. The bottom edge of the phone has a USB-C port. The upper and lower edges of the Reno3 Pro are not visible in the images. However, reports have revealed that the smartphone lacks a 3.5mm audio jack.

1 of 6

The back panel has a vertical camera strip at the upper-left corner of the Reno3 Pro. The ‘Ultra Steady’ text is imprinted inside the camera module. The Reno3 Pro will allow users to shoot highly stable videos. The TENAA listing of the phone has revealed that it includes a 48-megapixel main lens which is coupled with an 8-megapixel lens, a 13-megapixel sensor and a 2-megapixel. The Chinese manufacturer has confirmed that the Reno3 Pro come in four color variants like Blue Starry Night, Misty White, Sunrise Impression and Moon Night Black.

The OPPO Reno3 Pro 5G boots to ColorOS 7 based Android 10 OS. There is no microSD card slot on the device. The smartphone is powered by the Snapdragon 765G mobile platform and 8 GB / 12 GB of RAM. The two RAM variants respectively come with 128 GB and 256 GB of storage. The phone houses a 4,025mAh battery that carries support for 30W VOOC 4.0 Flash Charge technology. the smartphone measures 159.4 x 72.4 x 7.7mm and it weighs 171 grams.

UP NEXT: OPPO Enco Free wireless earbuds and 5G CPE T1 unveiled in Malaysia

(source)

The post OPPO Reno3 Pro 5G live shots reveal its magnificent design appeared first on Gizmochina.

The OPPO Reno3 and Reno3 Pro will be OPPO’s first mid-range 5G smartphones. While we are excited about both phones, we are actually eager to see how they measure up against each other since they will come with different processors. The Reno3 will be the first phone to be powered by MediaTek’s Dimensity 1000L processor while the Reno3 Pro will come with Qualcomm’s Snapdragon 765G. Benchmark app, Master Lu, has released the benchmark results for both phones, giving us a chance to compare the two chipsets.

It is important to mention that other than the processors, the RAM of both phones benchmarked is different. The Reno3 has 12GB of RAM which TENAA doesn’t state but is listed on the JD pre-order page, while the Reno3 Pro has 8GB of RAM. There will also be a 12GB RAM version of the Reno3 Pro and it will be available with 128GB or 256GB of storage.

CPU

For the CPU score, the 2.3GHz Snapdragon 765G wins with a total of 134,320 points as against the 2.2GHz Dimensity 1000L’s 110,392 points. Where it surpasses MediaTek’s processor is in the Multi

GPU

The winner here is MediaTek as the Dimensity 1000L scores 104,188 points against the Snapdragon 765G’s (Adreno 620 GPU) 97,786 points.

Memory Performance

The Reno3 wins here again with 50,392 points, which is no surprise as it has 12GB RAM as against the Reno3 Pro’s 8GB RAM and 40,695 points.

Storage Performance

The winner here again is the Reno3 with 40,695 points. Its read speed 1015MB/s and its write speed is 219MB/s while the Reno3 5G has a read score of 589MB/s and a write speed of 236MB/s. The read speed of the Reno3 is almost twice that of the Pro version which is unusual.

Overall Score

The Snapdragon 765G-powered Reno3 Pro wins with 307,855 points while the Dimensity 1000L is not too far behind with a total score of 305,667 points.

Conclusion

The Snapdragon 765G is the more powerful processor but the Dimensity 1000L is no slouch either and we are most impressed with its GPU score. While these are just prototypes that have been benchmarked, we look forward to real-life comparisons of the final product.

UP NEXT: Reno3 Pro to come with enhanced VOOC 4.0; charges full in 56 minutes

(Source)

The post Master Lu pits the Snapdragon 765G (Reno 3 Pro) against the Dimensity 1000L (Reno3) appeared first on Gizmochina.

Two live photos of the upcoming Reno3 5G smartphone have been posted on the web. However, only one of the two photos is genuine. The other is either a very good photoshop or an unknown device.

The photos were posted on Weibo by a user that goes “Clear-Aurora”. The device is turned on and we can confirm some details since the user is on the “About Phone” section.

The OPPO Reno3’s model number is PDCM00 and it is running ColorOS 7 based on Android 10. It has 8GB of RAM and 128GB of storage. These are the same details as what TENAA published last weekend.

With respect to the front design, the Reno3 has a waterdrop notch for a 32MP selfie camera. However, its bezels are not the slimmest we have seen on a phone. On the other hand, the image of the phone’s rear is quite surprising as it looks just like that of the Redmi K20 series save for the position of the camera. However, this device is not the Reno3 for the following reasons.

First, the color variant doesn’t match any of the four colorways OPPO itself revealed in its press renders. Also, the Reno3 has quad-rear cameras while this phone has just three cameras albeit arranged just like that of the Reno3. So since this is not the Reno3, which device is this? We honestly cannot say. It is either a photoshopped image or a different device entirely.

The Reno3 will arrive on December 26 as the first phone powered by the Dimensity 1000L 5G processor from MediaTek. It will have a 6.4-inch AMOLED screen with an in-display fingerprint scanner, 64MP + 8MP + 2MP + 2MP quad rear cameras, and a 4025mAh battery capacity.

UP NEXT: Oppo may open another R&D Center in India, this time in Bengaluru

(Source, Via)

The post Only one of these Reno3 live photos is genuine appeared first on Gizmochina.

OPPO will be unleashing the Reno3 and Reno3 Pro smartphones in China on Dec. 26 at 3PM (local time). Ahead of the launch, OPPO has revealed the appearance of both phones through official listings. The listings have not only confirmed the color options of the Reno3 and Reno3 Pro phones, but also have revealed their storage and RAM editions. The 5G editions of both phones are listed on JD.com.

OPPO Reno3 and Reno3 Pro 5G Variants and Color Options

The OPPO Reno3 is listed on four colors on OPPOShop.cn website such as Sunrise Impression, Misty White, Moonlight Black and Blue Starry Night. The two RAM and storage editions of the Reno3 include 8 GB RAM + 128 GB storage.

1 of 4

The JD listing of the Reno3 5G and Reno3 Pro 5G have revealed that both phones will have an additional color option of Moonlight White. The 5G variants listings also reveals the existence of an extra variant of 12 GB RAM + 256 GB storage. The pricing information of Reno3 series is currently under the wraps.

1 of 4

Editor’s Pick: Notch design giving way to Punch-hole as the new phone display trend: Realme exec

OPPO Reno3 and Reno3 Pro 5G Specifications

The Reno3 with PDCM00 / PDCT00 smartphone features a 6.4-inch S-AMOLED display with waterdrop notch that offers full HD+ resolution of 1080 x 2400 pixels. The Dimensity 1000L that clocks at 2.2GHz powers the smartphone. The rear side of the Reno3 features a 64-megapixel + 8-megapixel + 2-megapixel + 2-megapixel quad camera system. The smartphone measures 160.3 x 74.37 x 7.96mm and it weighs 181 grams.

The Reno3 Pro has a punch-hole AMOLED display of 6.5 inches. It produces full HD+ resolution of 1080 x 2400 pixels. The display of Reno3 Pro carries support for 90Hz refresh rate. The Snapdragon 765G mobile platform powers the smartphone. The 48-megapixel + 13-megapixel + 8-megapixel + 2-megapixel quad camera setup resides on the backside of the Reno3 Pro. The smartphone measures 159.4 x 72.4 x 7.7mm and it weighs 172 grams. The below shown video show on the OPPO Reno3 Pro reveals that the phone will come equipped with video stabilization feature.

The Reno3 and Reno3 Pro smartphones comes with other features such as 32-megapixel primary lens, Android 10 OS, in-screen fingerprint reader and a 4,025mAh battery with 30W VOOC 4.0 enhanced edition fast charging support. The pricing of the Reno3 and Reno3 Pro will be revealed during the launch event.

UP NEXT: Redmi K30 5G TENAA listing reveals 12GB RAM version

(source 1, 2)

The post OPPO Reno3 Pro 5G reservations begin; Color options and variants revealed appeared first on Gizmochina.

The OPPO Reno3 launch draws closer and with each passing day more details about the phone surface. The latest are live photos of the phone that reveal some of the phone’s specs.

The images were shared on Weibo by @Digital Chat Station and they show the system app, AIDA64 running on the phone. The Reno3 5G is shown to have a waterdrop notch, a blue power button, and a black frame.

The AIDA64 app confirms the phone is powered by MediaTek‘s MT6885 processor which will be officially known as the Dimensity 1000L. The second image shows the Dimensity 1000L has four Cortex-A55 cores clocked at 2.0GHz and 4 unknown cores clocked at 2.2GHz.

The Reno3’s TENAA listing said the SoC is clocked at 2.2GHz, so these unknown cores are the performance cores and should be the Cortex-A77. Also, the AnTuTu result already revealed the chipset has a Mali-G77 GPU

The phone in the image has 8GB of RAM and 128GB of storage just as the TENAA listing revealed but we won’t rule out OPPO announcing other variants in the future.

The Reno3 will have a 6.4-inch FHD+ AMOLED screen, a 64MP primary rear camera paired with an 8MP ultrawide angle camera, a 2MP macro camera, and a 2MP depth sensor. There will also be a 32MP camera in front for selfies.

OPPO will ship it with a 4025mAh battery and ColorOS 7 based on Android 10. It will also have an in-display fingerprint scanner.

UP NEXT: Oppo Showcased a prototype smartphone with an Under Display Camera and no physical ports

(Source)

The post Leaked OPPO Reno3 live photos confirm some specs appeared first on Gizmochina.

A few days ago, we reported that an official page has confirmed the Reno3 will be powered by MediaTek’s Dimensity 1000L 5G processor. Now, TENAA has published the full specification sheet of the non-pro model and we can’t wait for the phone to launch.

The Reno3 (PDCT00 and PDCM00) was issued its TENAA license on the 11th of December according to the info on the database. The phone has a 6.4-inch AMOLED display with a 2400 x 1080 resolution. We already know it has a waterdrop notch, thanks to press renders.

Under the hood of the Reno3 is the Dimensity 1000L octa-core processor clocked at 2.2GHz and paired with 8GB of RAM and 128GB of non-expandable storage. TENAA says the phone runs Android 10, so it should ship with ColorOS 7.

OPPO is going with a quad-camera setup arranged vertically and placed on the left side of the rear. The primary camera is a 64MP sensor and it is paired with an 8MP ultrawide angle camera, a 2MP macro camera, and a 2MP depth sensor. The selfie camera is a 32MP sensor. The images below show the camera housing has a very noticeable protrusion.

EDITOR’S PICK: Find X2 will launch in Q1 2020 with a custom Sony Lens and a Snapdragon 865 processor

The Reno3 has a fingerprint scanner and it is under the display. It packs a 3935mAh (4025mAh) battery capacity, the same as the Reno3 Pro. It will be interesting to see which phone has better battery life. The dimensions for the phone are 160.3 x 74.3 x 7.96 millimeters and the weight is 181 grams. The Reno3 Pro is thinner at 7.77 millimeters.

The spec sheet says the Reno3 5G supports NSA and SA bands 41, 78, and 79. Of course, there is support for 2G, 3G, and 4G networks too. TENAA says the phone will be available in white, black, silver-red, and silver-blue. However, the images provided are of a pink-blue color gradient.

The Reno3 and Reno3 Pro will be announced on December 26 in China. While Redmi has taken the title of being the first manufacturer to announce a phone powered by the Snapdragon 765G, OPPO will be the first to announce a phone powered by the Dimensity 1000L.

UP NEXT: OPPO Reno3 Pro 5G exposes all its specs for TENAA

The post TENAA: Full specs of the Dimensity 1000L-powered OPPO Reno3 5G appeared first on Gizmochina.

The Reno3 series will be announced in China on December 26. The launch will be for the Reno3 and Reno3 Pro and both will be 5G mid-range phones. While OPPO has announced that the Reno3 Pro will be powered by the Snapdragon 765G processor, it has not said anything about the chipset inside the Reno3. Now, we have official confirmation on the processor that will power the Reno3 as well as some other details, thanks to a page put up by OPPO.

According to the info on the page, the Reno3 will be powered by MediaTek’s Dimensity 1000L 5G processor. MediaTek is yet to announce the chipset which is also known as the MT6885.

Yesterday, the AnTuTu benchmark result of the Reno3 surfaced on the web and it revealed the device has an MT6885Z processor powering it. The benchmark result showed the processor has a Mali-G77 GPU. We presume it also has Cortex-A77 CPU cores like the Dimensity 1000 but at a lower clock speed.

The page also reveals the Reno3 has a thickness of 7.96 millimeters but does not say if it has the same 4025mAh battery capacity as the Reno3 Pro.

Based on the render we have seen, the Reno3 will have an AMOLED display with a waterdrop notch for the selfie camera. We also already know it will come with 64MP quad rear cameras and have an in-display fingerprint scanner.

The page also says OPPO is running a sweepstakes and the prizes up for grabs include the Reno3, OPPO OO-Fresh Earphones, and OPPO MH13 wired earphones etc.

UP NEXT: Chen Mingyong: Oppo smartwatches, smart TVs, and robots are coming soon

(Source, Via)

The post Official website confirms Reno3 will be powered by MediaTek’s Dimensity 1000L 5G SoC appeared first on Gizmochina.

The Reno3 Pro is ready to give the Redmi K30 5G a run for its money. Details about the features of the upcoming phone, which will launch on December 26, have been pouring in for weeks now. The latest is about the fast-charge technology that will be bundled with the device.

OPPO’s Vice President, Shen Yiren, took to Weibo to reveal that the Reno3 Pro will have an enhanced version of VOOC 4.0. He said the phone will be able to charge from 0 to 50% in just 20 minutes while a full charge will take 56 minutes.

That is much faster than the original VOOC 4.0 which takes 30 minutes to charge a 4000mAh battery from 0 to 67% and 73 minutes to charge it to 100%.

Based on the figures, it appears OPPO has reduced the trickle charge duration or increased the duration of the rapid charge. This way, the phone takes a shorter time to get full.

The Reno3 Pro has been confirmed to have a 4025mAh battery squeezed into a 7.7 millimeters thin body. The battery capacity is smaller than the Redmi K30 5G’s 4500mAh battery but nevertheless, it is good news that the phone is getting an improved fast charge technology.

The Reno3 Pro will come with a Snapdragon 765G processor, 48MP quad-rear cameras, a 6.5-inch OLED display with an in-display fingerprint scanner and a punch hole for a 32MP selfie camera, 8GB of RAM, 128GB of storage, and run Android 10 out of the box.

UP NEXT: OPPO unveils 5G CPE with Snapdragon X55 modem; launches next quarter

The post Reno3 Pro to come with enhanced VOOC 4.0; charges full in 56 minutes appeared first on Gizmochina.