The Chinese smartphone maker keeps stunning its fans by introducing affordable smartphones at a super compelling price. Similarly, Xiaomi is here with three new smartphones including Mi 10T, Mi 10T Pro, and Mi 10T Lite. These are successors to the much popular Mi 10 series. Xiaomi Mi 10T series offers a better battery, improved performance, powerful cameras, and lightning-fast 5G connectivity. These exceptional specifications and features are making Mi 10T smartphone popular among the buyers in this festive season. Already, the smartphone is bundled with top-notch software but users can even root Xiaomi Mi 10T to get some extra-ordinary features and fully flaunt the hardware.

Must See: Xiaomi Mi 10T vs Xiaomi Mi 10: Specs Comparison

It is quite easy to root Xiaomi Mi 10T but prior to that, we need to unlock the bootloader. It is the first and foremost step to gain root access on any Android smartphone. Then a custom Recovery such as TWRP is flashed to facilitate the further process of rooting and installing any third-party Mod.

Xiaomi Mi 10T Specs

The smartphone houses a powerful Qualcomm Snapdragon 865 chipset coupled with an octa-core processor and Adreno 650 GPU. It is built on a 7nm process and supports 5G connectivity. Xiaomi Mi 10T is available in two storage variants – 128GB + 6GB RAM and 128GB + 8GB RAM.

There’s a beautiful 6.67-inch IPS LCD display featuring 1080 x 2400 pixels resolution, 650 nits peak brightness, and Corning Gorilla Glass 5 protection. There’s a tripel rear camera section with 64-megapixel primary camera, a 13-megapixel ultrawide sensor, and a 5-megapixel macro lens. A 20-megapixel lens fits on the front for selfies and video calling.

Xiaomi Mi 10T comes with Bluetooth 5.1, NFC, GPS, WiFi, USB Type C 2.0 support. There’s a side-mounted fingerprint sensor for easy accessibility. It can easily manage full-day rigorous use with a 5000 mAh battery supporting 33W fast charging. It is available in Cosmic Black and Lunar Silver.

Note: GizmoChina.com is not responsible for any kind of damage to data or device while performing the unlocking. It will also void the device’s warranty and remove all data on the device. You’re proceeding at your own risk.

Pre-Requisite

• Backup all important data on another device.
• Charge its battery up to 70%.
• Always recommended to follow every step precisely.
• A PC or a Laptop.
• A USB Cable.

Downloads 

• Download Xiaomi USB Drivers
• Download and Extract ADB and Fastboot drivers
• Download Mi Unlock Tool
• Download stock firmware for your respective smartphone model

Steps to Unlock Bootloader of Mi 10T

Warning: Bootloader unlock wipes the data/internal storage. So, backup your personal and important files before proceeding.

You must follow each step carefully to successfully root the device.

• Enable Developer Mode by tapping the OneUI version 7 times after heading to the Settings > About Phone.
• Enable USB Debugging by heading to the Settings>Developer Option and toggle USB Debugging.
• Bind Mi Account by heading to Settings>>Additional Settings>>Developer Options>>Add account and device and login to your account.

1. Turn off Mi 10T and then boot into the Fastboot mode (Volume Down +Power Button).
2. Connect Xiaomi Mi 10T with PC/Laptop using a USB cable.
3. Download Mi Unlock Tool from above and then extract it to a folder.
4. Open Mi Flash Tool > Login with MI Account and let the tool verify your phone eligibility.
5. Once the Phone is verified, the “Phone connected” text will appear.
6. Now, press the Unlock button in the tool and then press the “Unlock anyway” button when prompted further.
7. Upon successful completion, the tool will show “Unlocked successfully” text.
8. Click on the Reboot phone.
9. Enjoy!

Using the above steps you’ve successfully unlocked the bootloader of Mi 10T. Now, proceed further to root the device using the patched boot method.

Root Xiaomi Mi 10T using Magisk patch Boot.image

It is a bit time-consuming process but easy by following the steps below. So carefully follow each and every step to successfully root the device, otherwise, you will end up with a bricked device.

Patching boot.img file using Magisk

1. Download and extract the stock firmware of your respective region or variant on your PC.
2. Connect your smartphone with a PC via a USB cable.
3. You need to transfer the boot.img file from the extracted folder to your phone.
4. Download and install Magisk Manager from the above link.
5. Then, pop to install Magisk will appear > Select Install > Install > Patch Boot Image File.
6. Navigate to internal storage and select the boot.img file on your phone.
7. Let Magisk patch the boot.img file for a few seconds.
8. Upon successful patching, copy the new “patched_boot.img” in the same folder on your PC.

Installing Patched Boot Image

1. Extract the ADB and Fastboot tool into a folder.
2. Copy the .tar file or patched boot image into the extracted ADB and Fastboot directory. (Change the name to patched_boot.img)
3. Boot into download mode – Turn off the phone, and hold the Volume Up + Volume down buttons, and connect with the PC at the same time.
4. Open Command Prompt or Powershell by pressing Shift Key + right Mouse click in the ADB and Fastboot directory.
   
5. Flash the patched boot image on the Xiaomi MI 10T by executing the following command:

   fastboot flash boot patched_boot.img

6. Use the following commands to boot the patched _boot.img:

   fastboot flash boot_a patched_boot.img
   
   fastboot flash boot_b patched_boot.img

7. Let the process finish, and now then type the below command to reboot the device:

   fastboot reboot

8. Enjoy!

You have successfully attained root access on Xiaomi Mi 10T. The users can easily verify the Systemless Root access by launching the Magisk manager app on your device. We hope our guide to root Xiaomi Mi 10T and unlock bootloader might have helped you. If you get any problem, then let us know via the comments below.

See More: Xiaomi Mi 10T Lite vs Google Pixel 4a 5G vs OnePlus Nord: Specs Comparison

The post How to Root Xiaomi Mi 10T and Unlock Bootloader appeared first on Gizmochina.

The Korean giant always brings a plethora of devices to entertain the mid-range segment throughout the globe. One such device among the flock is Galaxy M51 which was recently launched carrying value-for-money specifications. The users of Galaxy M51 can now root their devices to bring more customization to the smartphone. We will guide you to unlock the bootloader, install TWRP, and root Galaxy M51.

See More: OnePlus 8T Wallpapers available for download a week before the official launch

What is Rooting and its benefits?

Rooting is a process through which the Android smartphone users gain the root (administrator) access to the phone. After rooting the device, the user has the access to remove bloatware and all unnecessary stuff from the device. Moreover, it enables us to extend the features and customize the device more vividly.

There are many advantages and some disadvantages of rooting the device.

Benefits of Rooting:

• Ability to install custom ROMs and custom firmware.
• Extends battery standby time.
• Improve the performance of the smartphone by removing unnecessary bloatware.
• Allows installing custom Kernels.
• Improves the usability of the device.

Disadvantages of Rooting:

• Voids Warranty
• Loss Data if backup not taken
• Bricking device

Samsung Galaxy M51 Specifications

The smartphone houses a Qualcomm Snapdragon 730G chipset coupled with an octa-core chipset and Adreno 618 GPU. THere’s a 6.7-inch Super AMOLED Plus display with 1080 x 2400 pixels resolution and 20:9 aspect ratio. It is available in 128GB + 6GB RAM and 128GB + 8 GB RAM variants.

A quad-rear camera module is present at the rear side featuring a 64MP + 12MP + 5MP + 5MP cameras. There’s a 32MP selfie camera on the front for quality selfies. A side-mounted fingerprint sensor for easy authentication. Moreover, the device comes with a 7000 mAh Li-Po non-removable battery with 25W fast charging.

It is available in two color options of Celestial Black and Electric Blue colors.

Note: Gizmochina.com is not responsible in any way for the loss of data and devices. You’re proceeding at your own risk as in some cases it will even void your warranty. 

Unlock Bootloader of Galaxy M51

It is necessary to follow each step carefully, otherwise, your device will get bricked. Make sure to download the below-mentioned tools:

• Samsung USB Drivers – Download
• Magisk Manager – Download 
• Odin Flash Tool – Download 
• Backup all important data on Android device
• Download the Galaxy M51 Firmware

Steps to Unlock Bootloader of Galaxy M51

1. Enable Developer Mode by tapping the OneUI version 7 times after heading to the Settings > About Phone.
2. Enable USB Debugging by heading to the Settings>Developer Option and toggle USB Debugging.
3. Now, Boot into the download mode by pressing Volume Up + Volume down and connect your phone to your PC.
4. Press the volume up button until the bootloader unlock menu appears.
5. Again press the Volume up button to confirm the bootloader unlock process.
6. The device will reboot!

You’ve successfully unlocked the bootloader of the Galaxy M51. Now we can easily root the device.

Steps to root the Galaxy M51 1using Patched Boot Image

It is quite easy to root the device using the steps mentioned below.

Step 1: Create a Patched boot image

1. Download the firmware file for your smartphone and extract it into a folder.
2. Download the Magisk Manager app on your smartphone
3. Now, Connect your smartphone with the PC using the USB cable.
4. You need to transfer the boot.img file from the extracted folder to your phone.
5. Open, the Magisk Manager application and select Install > Install > Patch from the image file.
6. Select the boot.img file that you copied in the step above.
7. Magisk will start patching the image.
8. Now, replace the boot.img file in the extracted folder with the newly created “patched_boot.img” file via Magisk Manager App.

Step 2: Flash patched boot image

1. Download 7zip software to archive the new patched_boot.img into .tar format. (Odin accepts .tar format)
2. Download Latest Odin Tool on your PC.
3. Download ADB and Fastboot drivers on your computer and extract it to the folder.
4. Copy the .tar file or patched boot image into the extracted ADB and Fastboot directory.
5. Boot into download mode – Turn off the phone, and hold the Volume Up + Volume down buttons, and connect with the PC at the same time.
6. Now, open the Odin.exe file as administrator.
7. A blue column will be visible under ID:COM field one you are connected.
8. Browse for patch boot.tar image in the AP section.
9. Now, head over to Options and select Auto Reboot and F.Reset options. Unselect all other options
10. Click on the Start button to root your device.
11. After completion, your device will reboot.
12. That’s it!

You’ve successfully gained root access, now you can install any custom ROM, install MOD, and extend the functionality of your device. Make sure to unlock the bootloader of Galaxy M51 prior to rooting the device. However, if you get any problem while following the guide, do let us know via the comments below.

Related: Samsung Galaxy M51 vs Xiaomi Mi Note 10 Lite vs Moto G 5G Plus: Specs Comparison

The post How to unlock bootloader and root Galaxy M51 appeared first on Gizmochina.

It was a remarkable year for Xiaomi and Redmi, as both the companies split up to bring more user-friendly and more relatable devices as per the user demands. Since Xiaomi and Redmi parted ways, both the companies have stormed the market with their respective devices and gained massive sales. It has increased the competition among the companies to offer better hardware specifications at affordable prices. Redmi Note 8 Pro is such a device that is available at competitive prices while offering high-end specifications. We have prepared a guide to install TWRP and root Redmi Note 8 Pro.

Must See: Download Samsung Galaxy S20 Wallpapers in HD Quality

There are various advantages of rooting the Redmi Note 8 Pro. It will allow the advanced users to flash the mods and tweak the smartphones as per desire. The users can change themes, boot animations, lock screens, fonts, and a lot of other things after rooting the device. It even opens doors for a single click backup and restoration.

What is TWRP Custom Recovery?

TWRP stands for Team Win Recovery Project is an open-source recovery project for Android-based smartphones. It allows users to perform various functions from installing the custom mods, firmware to taking full system backups. TWRP has primarily used custom recovery on Android devices as it has extensive support. There are several benefits of using TWRP Custom Recovery.

Merits

• GUI and touch-based interface
• Easily flash zips of MODs, Frameworks, and ROMs
• Brings the ability to flash custom Kernels.
• Allows to make full system Backups
• It helps to remove bloatware from the system.
• Facilitate in rooting the device easily.
• Ability to Wipe, Cache and Data.

Demerits

• Your Warrant voids
• It could brick your device permanently

Xiaomi Redmi Note 8 Pro Specifications

Xiaomi Redmi Note 8 Pro was launched in September 2019 with a lot of goodies. The smartphone comprises a 6.53-inch IPS LCD display with a resolution of 1080 x 2340 pixels and a 19.5:9 aspect ratio. The display sports a Corning Gorilla Glass 5 and supports 500 nits max brightness with a pixel density of 395 PPI.

It is powered with a MediaTek Helio G90T chipset packing an octa-core processor and Mali-G76 MC4 GPU. The smartphone is available in several different storage options like 64 GB + 6 GB, 128 GB + 6 GB, 128 GB + 8 GB and 256 GB + 8 GB. The user can use a microSDXC card along with the SIM slot to expand the storage.

In optics, Xiaomi Redmi Note 8 Pro consists of a quad camera setup featuring a 64-megapixel primary lens, an 8-megapixel ultrawide sensor, a 2-megapixel macro lens, and a 2-megapixel depth sensor. There’s a 20-megapixel front camera for beautiful selfies and video calling.

There’s support for WiFi, Bluetooth 5.0, NFC, GPS, Infrared, Radio and USB 2.0. Moreover, the smartphone supports a Fingerprint sensor, accelerometer, gyro, proximity, and compass. The smartphone comes with a 4500 mAh non-removable battery with 18W fast charging. It comes in different color variants including, Black, Red, Blue, White, Deep Sea Blue, Midnight Blue, Twilight Orange, and Electric Blue.

Install TWRP on Redmi Note 8 Pro

Follow the instructions carefully to get TWRP custom recovery on Redmi Note 8 Pro.

Note: It is recommended to proceed only if you’re an advanced user. The device hard bricks easily, and you may have to spend a few bucks to get it repaired from the service center. 

GizmoChina.com is not responsible for any damage to data or devices. Rooting or installing TWRP may void your warranty and you won’t be able to get direct OTA updates. 

Prerequisites

• Backup all the important data using our guide.
• Charge your device up to at least 50 %.
• Download and Install ADB and Fastboot drivers on PC/MAC and extract it in a folder.
• Download TWRP from here and keep it into the extracted ADB and Fastboot Drivers folder. (Note: rename the recovery to twrp.img.)
• Unlocked Bootloader is necessary for the TWRP installation.
• Enable Developers Option by heading to the Settings > About Phone > Tap MIUI Version 7 times.
• Enable USB Debugging Mode by heading to the Settings > Additional Settings > toggle USB Debugging option.

Steps to install TWRP on Redmi Note 8 Pro

1. Before proceeding, make sure USB Debugging and Bootloader is unlocked.
2. Extract ADB and Fastboot tools in a folder.
3. Now, press Shift + Right Mouse Click in the same folder to open CMD or Powershell window.
   
4. Connect your device with PC via a USB cable.
5. Now, turn off your device and execute the following command to reboot into the bootloader mode. (Note: Press OK if a popup to “Allow USB debugging” comes.)

   adb reboot bootloader

6. Now to flash the TWRP, make sure to execute the following command after renaming the recovery file to twrp.img.

   fastboot flash recovery twrp.img

7. Now, reboot your device upon typing the below command. (Note: Sometimes, the stock ROM replaces the TWRP. IN order to prevent that, hold the Volume UP + Power Key after typing the below command.)

   fastboot reboot

8. You can normally reboot the device from TWRP and enjoy the TWRP recovery.

You have successfully installed the TWRP on Redmi Note 8 Pro. If you want to root, then follow the process below.

Root Xiaomi Redmi Note 8 Pro

Rooting is the initial step before installing any other custom MOD on the device. We have listed below the steps and the requirements that you need to download.

Prerequisites:

Magisk Manager Zip File to root and save it on your smartphone.

Download Disable_Dm-Verity_ForceEncrypt.zip and Save it in your mobile.

Steps to install Magisk on Redmi Note 8 Pro

1. Turn off your device and boot into recovery by pressing the Volume Up + Power Key button for 3-5 seconds.
2. Select Wipe > Advance Wipe > Select Cache Data.
3. Now, Return to TWRP Home and select Install.
4. Browse for Disable DM-Verity ForceEncrypt.zip
5. Upon installation, now again select Install from TWRP Home.
6. Browse Magisk.zip and install it.
7. Now, Reboot your device and enjoy the root access via Magisk manager.

After following our guide, you have successfully installed the Magisk and gained root access on Redmi Note 8 Pro. If you have any problem or issue while following the steps above, then let us know via the comments below.

Related: Oppo F15 vs Samsung Galaxy A51 vs Redmi Note 8 Pro: Specs Comparison

The post How to install TWRP and root Redmi Note 8 Pro? appeared first on Gizmochina.

Xiaomi Mi A3 is quite a popular device in the mid-range segment running on the Android One program. It is the third smartphone on the Android One series that is co-developed by Google as part of its Android initiative. The smartphone is well-received by users in Europe and some developing nations like India. The third-party developers are also eagerly developing new mods, working on frameworks to make them compatible. Similarly, Xiaomi has received official TWRP support a few days ago.

Must See: Xiaomi India says Android 10 coming to Mi A3 next month

In our guide, we will get root access after installing TWRP on Xiaomi Mi A3. Over some time, the device had an unofficial port of TWRP available with some bugs. The flashing process will be different as the device uses the A/B partition system.

There are various advantages of using the TWRP recovery to get root access and flash other MODs. It also brings the capability of creating and restoring a system backup. The TWRP is GUI based custom Recovery that helps the users to do modification on the Android system by flashing respective MODs.

Xiaomi Mi A3 Specifications

The Xiaomi Mi A3 comes with a huge 6.08-inch Super AMOLED HD+ display featuring a 1560 x 720-pixels resolution and a pixel density of 293 PPI. The display is protected with Corning Gorilla 5 to protect against usual falls. The smartphone is powered with a Qualcomm Snapdragon 665 chipset featuring Adreno 610 GPU and an octa-core processor.

In Optics, the smartphone carries an AI-assisted triple rear camera setup with the 48-megapixel primary camera, 8-megapixel ultrawide sensor, and 2-megapixel depth-sensing lens. A 32-megapixel front camera is present for selfies and video calling. There’s a 4030 mAh battery with 18W quick charging via Quick Charge 3.0.

Xiaomi Mi A3 comes in different storage variants of 64GB + 4GB, 128GB + 4GB, and 128GB + 6GB. It supports WiFi, Bluetooth 5.0, GPS, Infrared Port, FM Radio and USB 2.0. There’s an under-display fingerprint sensor, accelerometer, gyro, proximity, and compass. It comes in three different colors of Kind of Gray, Not just Blue and More than White.

Install TWRP on Xiaomi Mi A3

Installing TWRP on Mi A3 will open doors for unlimited possibilities to customize the smartphone.

Note: Gizmochina.com is not responsible if any damage to your device or data occurs while following this guide. You are proceeding at your own will. Unlocking Bootloader or rooting the device will void the warranty. The device will not receive any official OTA update from the company. 

Prerequisites:

• Download and Install ADB and Fastboot drivers on PC/MAC.
• Download Xiaomi USB Drivers.
• Unlock bootloader of Mi A3 using our guide.
• Ensure the phone’s battery is more than 60%
• Backup important data on any external media
• Download the latest TWRP from here.
• Download the latest Magisk manager and install it on your phone.

Steps to install TWRP on Xiaomi Mi A3

Follow the below-mentioned instructions carefully to successfully install TWRP. Before proceeding, please ensure your Xiaomi Mi A3 bootloader is unlocked.

1. Enable Developer Mode by tapping the MIUI version 7 times after heading to the Settings > About Phone.
2. Enable USB Debugging by heading to the Settings>Developer Option and toggle USB Debugging.
3. Connect your smartphone with the PC via USB Cable.
4. Download the TWRP image from the above section and place it into the extracted ADB and Fastboot tools folder. Also, ensure to copy the same file on your phone’s internal storage.
5. Open Command Prompt or Powershell by pressing SHIFT + RIGHT-Click in ADB and Fastboot folder.
   
6. Reboot your smartphone into fastboot mode by executing below mentioned command.

   adb reboot bootloader

7. In order to temporarily flash the TWRP on Mi A3, execute the following command:

   fastboot boot twrp.img

8. Once in TWRP after boot, navigate to Advanced > Install Recovery Ramdisk option > Browse the TWRP image.
9. After Installing the TWRP image in the above step. Again head to Advanced > and “Fix Recovery Bootloop” option to avoid boot loops.
10. Reboot your device and enjoy TWRP custom recovery.

You’ve successfully installed TWRP on Xiaomi Mi A3. In order to attain root access, you need to follow the steps below.

Root Xiaomi Mi A3 with Magisk

Rooting Xiaomi Mi A3 needs a custom Recovery installed, or you can root the device using a patched boot method. Otherwise, you can get the root privileges by flashing the Magisk manager on Xiaomi Mi A3 by following the below steps.

1. Download Magisk manager File on your smartphone.
2. Boot into the recovery, after taking the recommended backup of your stock ROM.
3. Tap Install, and then browse ‘magisk.zip’ file you downloaded, and swipe to confirm the flash.
4. After a few seconds, you can successfully reboot the device from the TWRP manager.
5. Enjoy!

The user has successfully rooted the Xiaomi A3 using the above steps. You can now install your favorite MODs, can tweak the performance and battery efficiency. If you get any problem, let us know via the comments below.

Related: Xiaomi India says Android 10 coming to Mi A3 next month

The post How to root and install TWRP on Xiaomi Mi A3? appeared first on Gizmochina.

Xiaomi’s affordability and competitive specifications are the prime reasons behind its accent in global markets. The Chinese giant has launched multiple variants of the same smartphone in different countries to match the local taste. The diversification of smartphones is making Xiaomi grab more sales. Similarly, Xiaomi launched the Mi CC9 as the Mi 9 Lite in the countries outside China. We have prepared a guide to install TWRP and root Xiaomi Mi 9 Lite and Mi CC9.

Must See: Realme X2 vs Xiaomi Mi 9 Lite vs Oppo Reno2 Z: Specs Comparison

Android’s ability to customize the features is due to its open-source nature. The third-party developers often love to play with devices that often get huge sales and the OEM supports the development by timely releasing Kernel source code.

Rooting Xiaomi Mi 9 Lite or installing TWRP is just the beginning to get additional features. There are a lot of other advantages of rooting a smartphone. The users can easily install the custom ROMs based on the latest Android version. There are different MODs, frameworks, and zips that can easily customize your smartphone.

Xiaomi Mi 9 Lite Specifications

The Xiaomi Mi 9 smartphone features a 6.39-inch Super AMOLED display featuring 1080 x 2340 pixels and 19.5:9 aspect ratio. The display presents 403 PPI of pixel density, 600 nits max brightness and envelops a Corning Gorilla Glass 5. The smartphone is powered with Qualcomm Snapdragon 710 chipset packing an octa-core processor and Adreno 616 GPU.

Xiaomi Mi 9 Lite comes packed in two different versions of 6 GB + 64 GB and 128 GB + 6 GB. In optics, the smartphone embeds a triple rear camera module consisting of a 48-megapixel primary camera, an 8-megapixel ultrawide sensor, and a 2-megapixel depth sensor. A single 32-megapixel shooter is present on the front for selfies and video calling.

Xiaomi Mi 9 Lite aka Mi CC9 features a Wifi, Bluetooth 5.0, GPS, NFC, Radio, USB 2.0, and Infrared Port. An under-display fingerprint is packed along with the device. There’s a 4030 mAh battery with 18W fast charging technology. Xiaomi Mi 9 Lite is available in Pearl White, Aurora Blue, and Onyx Grey. The pricing starts at $233.

Note: GizmoChina.com is not responsible for any damage to data or devices. The users are proceeding on their own will.

We will move forward step-by-step:

1. Unlock Bootloader
2. Install TWRP
3. Root Xiaomi Mi 9 Lite

Unlock Mi 9 Lite Bootloader

It is a very simple and straightforward process to unlock the bootloader of the Xiaomi Mi 9 Lite. It is quite an easy process, the user needs to take care of these prerequisites before proceeding for the steps below.

Prerequisites:

• Download and Extract ADB and Fastboot Tools on your PC.
• Download Xiaomi USB Drivers on your PC.
• Make a complete backup of your data on eternal media.
• Ensure 60%+ battery to prevent a sudden shutdown.
• Download Mi Unlock Tool.

Steps to Unlock Xiaomi Mi 9 Lite Bootloader

1. Enable Developer Option by heading to Settings > About Phone > and tap MIUI Version 7 times.
2. Enable USB Debugging and OEM Unlock by Heading to Settings > Developer Option > and Enable OEM Unlock and USB Debugging. 
3. Now again go to Settings> Mi account > Mi Cloud and Enable Sync and Find Device. 
4. Install and Open Mi Unlock Tool after downloading and extracting it.
5. Press ‘Agree’ on the disclaimer page that will appear.
6. Login in with the same Mi Account that you have used on your smartphones. Otherwise, you can sign up for a new account and use it on a smartphone and for the next steps here.
7. Connect your smartphone with a PC via a USB cable.
8. Open CMD or Power Shell in the extracted ADB and Fastboot Folder by pressing Shift+ Right Click.
   
9. Now, type the below command to boot into the bootloader mode:

   adb reboot bootloader

10. The device will show Connected in Mi Unlock Tool.
11. Now, click on ‘Unlock’, and the process to unlock will start automatically. Once the process gets completed, the device will be rebooted.
12. Xiaomi Mi 9 Lite is unlocked!

You have successfully rooted your smartphone.

Install TWRP on Mi 9 Lite

TWRP – Team Win Recovery Project is a GUI based custom recovery used to root, and install custom MODs, ROMs, and Kernels.

Prerequisites:

Download TWRP Recovery for Xiaomi Mi CC9/Mi 9 Lite.
+
Additional Downloads like ADB and Fastboot, Xiaomi USB Drivers as listed above.

Steps to install TWRP on Mi 9 Lite

Upon successfully unlocking the bootloader of Xiaomi Mi 9 Lite, follow the steps below to install TWRP on Mi 9 Lite.

1. Make sure to set-up ADB and Fastboot tools after downloading from the links above on your PC.
2. Enable Developer Settings, USB Debugging and OEM Unlock (Follow Step 1 & 2 for enabling this in the above guide.)
3. Open CMD or ADB Terminal by pressing Shift + Right Click on ADB and Fastboot extracted folder.

   adb reboot bootloader

4. Optional: Execute the following command to flash stock vbmeta.

   fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img

5. Place the download TWRP recovery into the same ADB and Fastboot Folder. Then, execute the following command to flash TWRP on Xiaomi Mi 9 Lite:

   fastboot flash recovery twrp.img

6. After a successful flash, type the command to reboot the device:

   fastboot reboot

Note: The device might not automatically replace the custom recovery during the first boot. The user needs to press the proper key combination to enter the TWRP Mode. After successfully executing ‘fastboot reboot’ command, press and hold the proper key combination to enter the TWRP Mode.

This way, you have successfully installed TWRP on Xiaomi Mi 9 Lite and Mi CC9. The users can now root the Xiaomi Mi 9 Lite by installing Magisk and SuperSU.

Root Xiaomi Mi 9 Lite

For most of the users, the ultimate goal is to root Xiaomi Mi 9 Lite. The users can download SuperSU or Magisk Manager to root the device. We are going with the Magisk manager to get root access.

1. Download Magisk manager File on your smartphone.
2. Boot into the recovery, after taking the recommended backup of your stock ROM.
3. Tap Install, and then browse ‘magisk.zip’ file you downloaded, and swipe to confirm the flash.
4. After a few seconds, you can successfully reboot the device from the TWRP manager.
5. Enjoy!

We hope you have successfully rooted Mi 9 Lite by following our guide. If you have any problems, then let us know via the comments below.

Related: Honor 20 Lite vs Xiaomi Mi 9 Lite vs Realme X2: Specs Comparison

The post How to install TWRP and Root Xiaomi Mi 9 Lite /Mi CC9? appeared first on Gizmochina.

Xiaomi smartphones always remain on the top list on several development forums. The overall active userbase and the development-friendly environment are some significant reasons behind active third-party development. TWRP – Team Win Recovery Project recently extended support for Redmi 8, and the users can now flash it by following the steps below.

Editor’s Pick: Redmi 8 vs. Samsung Galaxy M10s vs. Realme C2: Specs Comparison

There are many advantages of using custom recovery like TWRP. It helps to interact with the system using a Graphical User Interface. Several other features of custom recovery include the installation of Custom ROMs, MODS, and Magisk. The user can perform the system-wide updates and can restore using the same interface.

What is Custom Recovery?

A custom recovery is a third-party recovery environment used to get the features that were limited while using stock recovery. It is an interface that helps the user to interact with the recovery environment. It carries some additional features to the stock Android recovery.

There is a wide variety of custom recoveries that are available for the Android system. However, TWRP, Philz, RedWolf, and OrangeFox are some prominent custom recoveries available for Android devices.

Advantages of Custom Recovery

• Brings the ability to flash custom Recovery
• Allows to root Android system with Magisk or SUperSu
• Enables System Backup and Restore
• Ability to flash third-party custom ROMs
• Ability to Customize the system
• Features an ability to flash custom MODs

Xiaomi Redmi 8 Specifications

Xiaomi launched the Redmi 8 last year in October featuring Qualcomm Snapdragon 439 chipset coupled with an Octa-Core processor and Adreno 505 GPU. The smartphone features a 6.22-inch IPS LCD capacitive touchscreen with a resolution of 720 x 1520 pixels having a 19:9 ratio. It is protected with Corning Gorilla Glass 5 to protect from frequent falls. The display features 400 nits brightness and offers a ~81.8% screen-to-body ratio.

Redmi 8 runs Android 9.0 Pie atop MIUI 11. There are multiple storage variants including 3GB RAM + 32GB storage and 4GB RAM + 64GB internal storage. In optics, there’s a dual rear camera featuring a 12-megapixel primary camera and a 2-megapixel depth sensor. An 8-megapixel front camera is present for selfies and video calling. Both the front and the rear-camera support HDR feature while snapping pictures.

Unlike the high-end smartphones, Redmi 8 carries a 3.5mm audio jack. In Communication, there’s a WiFi, Bluetooth 4.2, GPS, Infrared port, Radio, and USB 2.0 Type-C support. Redmi 8 hosts a 5000 mAh LiPo 18W fast-charging battery. It is available in four different colors, including Onyx Black, Ruby Red, and Sapphire Blue. A rear-mounted fingerprint is present for better authentication.

Note: Installing custom recovery may void your warranty. GizmoChina does not endorse in rooting or making any changes to your device. You may proceed to install the custom recovery at your own risk. If any damage to data or device happens, GizmoChina should not be held responsible.

Prerequisites:

• Make sure to backup all important data.
• Charge your device up to at least 50 %.
• Download and Install ADB and Fastboot drivers on PC/MAC.
• Download TWRP 3.3.1 from here and keep it into the extracted ADB and Fastboot Drivers folder.
• Unlocked Bootloader is necessary for the TWRP installation.
• Enable Developers Option by heading to the Settings > About Phone > Tap MIUI Version 7 times.
• Enable USB Debugging Mode by heading to the Settings > Additional Settings > toggle USB Debugging option.

Steps to install TWRP on Redmi 8

1. Make sure you have enabled the USB Debugging option by following the above steps.
2. Now, extract the ADB and Fastboot Drivers into a folder on your PC.
3. Then, Open CMD or Powershell window by pressing the Shift + Right Mouse Key in the same folder.
   
4. Connect your device with the PC via a USB cable.
5. Poweroff your device and proceed with the next instructions.
6. Press and hold the Volume Up + Power button to boot into the fastboot mode.
   or
   Execute the following command and boot into bootloader/fastboot mode of Redmi Note 8 pro. (Note: A popup for permission to “Allow USB debugging” will come, tap OK.)

   adb reboot bootloader

7. Execute the following command to flash the TWRP recovery on Redmi Note 8. Rename the image file to twrp.img and type

   fastboot flash recovery twrp.img

8. If you want to root, then skip Step 9 and move to the Root section below.
9. Now, reboot your smartphone and enjoy the custom TWRP recovery on Redmi 8.

   fastboot reboot

10. That’s it! Now, you can enjoy the custom recovery.

The interested users can now root the device or can install custom MODs using the GUI interface of TWRP. Follow the steps below to get root access on Redmi 8.

Steps to Root Redmi 8

Rooting is the ultimate goal of installing a custom recovery on any device. Follow the instructions below to attain root privileges on Redmi 8.

1. Download the latest Magisk zip and move it to the internal storage on the device.
2. Boot into TWRP recovery by pressing Volume Down + Power button or execute the following command:

   adb reboot recovery

3. Backup important data before proceeding further.
4. Select “Install” from the TWRP and browse the Magisk.zip in internal storage.
5. Confirm the flash by swiping action.
6. Reboot System from TWRP recovery.
7. Upon successfully boot, find the Magisk application or install the Magisk Application from third-party sources.
8. Enjoy!!

You have successfully installed the TWRP and rooted Redmi 8 using the above guide. If you have any issues while following the above steps, then comment below for the solution.

Read More: Redmi 8 Phantom Red edition is now available for purchase in China.

The post How to root and install TWRP on Redmi 8 appeared first on Gizmochina.

Xiaomi has left the competitors in lurk after announcing the Mi A3 in China, India and other parts of the world. The company keeps surprising users with new smartphones at competitive prices. Xiaomi Mi A3 is also a useful device which is launched recently with decent specifications and affordable pricing. Many users are interested in buying the Mi A3 over the other Android One devices. As like always, the development of the new Xiaomi device has started. A senior developer at XDA has published the patched boot image to root Xiaomi Mi A3 using Magisk.

Xiaomi Mi A3 specification

Xiaomi Mi A3 is a mid-range smartphone with Qualcomm Snapdragon 665 SoC packing an 11 nm Octa-core Kryo 260 CPU at 2.0GHz of clock speed. The Adreno 610 GPU is sufficient to handle the graphics-intensive tasks. The device is available two different storage options of 4GB+64GB and 4GB+ 128GB internal storage. The user can also expand the storage up to 256GB via MicroSD card. A 6.088-inch AMOLED DotDrop display makes it more beautiful with the HD+ resolution of 1560 x 720 pixels. The rounded display corners with 2.5D glass and Corning Gorilla Glass 5 makes it look premium and durable.

In the optical department, Xiaomi Mi A3 carries an AI Triple rear camera featuring a 48 MP primary Sony camera, an 8 MP ultra-wide-angle camera, and another 2 MP depth camera. It is optimized with AI portrait mode, night photography mode, and AI scene detection. A 32 MP AI selfie camera is present in its dewdrop display with the ability of AI face unlock, Panorama Selfie, etc.

Other features include an in-screen fingerprint sensor, hybrid SIM slot 4030 mAH battery supporting QC 3.0 18W fast charging. In connectivity, the phone offers support for WiFi, Bluetooth 5.0, GSM/VoLTE, 3.5 mm audio port, GPS, GLONASS, AGPS, and Beido. It also packs a Gyroscope, Accelerometer, Electronic compass, IR blaster, light sensor, and proximity sensor to make it smarter.

Related: Xiaomi Mi A3 vs Realme 5 Pro vs Redmi Note 7 Pro: Specs Comparison

What is rooting?

Rooting is an aspect of Android smartphone through which users gain superuser access to the whole Android system on a particular device. It is done to attain full access to the smartphone. It open doors to uninstall the bloatware, flash mods and customize as per need which is typically impossible in the stock configuration.

Advantages

• Full control across the device and applications.
• Improves customizability
• Brings the ability to install custom ROM.
• It also brings support for custom themes.
• Ability to uninstall bloatware or unnecessary system apps from the phone.
• Install custom ROM mods such as Magisk, Xposed and others.
• Upgrade to the newer Android version

Disadvantages 

• It voids warranty
• The user won’t be able to receive OTA updates
• Risk of bricking the smartphone
• It may also lead to poor performance

Now, let’s see how to root the Xiaomi Mi A3 using the patched boot image. Before proceeding further, please set up the environment with the dependencies as mentioned below.

Note: GizmoChina.com is not responsible for any damage to data or device while performing the unlocking. It will also void the device’s warranty and remove all data on the device. You’re proceeding at your own risk.

Pre-Requisites:

• Download and Install ADB and Fastboot drivers on PC/MAC.
• Download Xiaomi USB Drivers.
• Unlock bootloader of Mi A3 using our guide.
• Ensure the phone’s battery is more than 60%
• Backup important data on any external media
• Download Mi A3 stock boot.img found on this GITHUB.
  (Note: Download the boot image file of the respective version of MIUI that is installed on your phone. The link added above corresponds to MIUI v10.3.5.0 as it matches the version on my Xiaomi Mi A3.)
• Download latest Magisk manager and install it on your phone

Steps to root Xiaomi Mi A3

Follow all the steps carefully. Otherwise, your device might get bricked.

1. You should have unlocked the bootloader of Mi A3.
2. Enable Developer Mode by tapping MIUI version 7 times after heading to the Settings > About Phone.
3. Also, enable USB Debugging by heading to the Settings>Developer Option and toggle USB Debugging.
4. Now, connect your phone with PC via the USB cable.
5. Copy the downloaded boot.img to your phone’s internal (or external) memory.
6. Also, place a copy of boot.img in your ADB and Fastboot extracted folder.
7. Download and install Magisk Manager on your phone.
8. Open Magisk Manager app and patch the file by going to Install > Install (once again) > Select Patch a file and then browse the location where you stored the stock boot.img.
9. Upon selection, the Magisk manager will patch the boot image and will store it in internal memory/Download/magisk_patched.img.
10. Move the patched file from your mobile to PC. (Note: place the patched file in the same extracted ADB and Fastboot folder).
11. If you can’t find the file using MTP mode, you can pull it via below mentioned ADB command:

    adb pull /sdcard/Download/magisk_patched.img

12. Now, uninstall Magisk manager App from Xiaomi Mi A3.
13. Connect the phone with PC via USB cable. Now flash the patched boot image on your smartphone. Execute the following command:

    adb reboot bootloader

14. After rebooting into the fast boot mode, type the following command to flash patched boot:

    fastboot flash boot magisk_patched.img

15. Just after successfully flashing the fastboot, type the continue command instead of reboot:

    fastboot continue

16. Upon successful boot-up, install Magisk Manager and enjoy the root access.

If you followed all the step accurately, then you would have rooted Xiaomi Mi A3 using patched boot image. If any error pops-up while rooting Mi A3, then do let us know via the comments below.

The method above is strictly for Xiaomi Mi A3. Other devices may get bricked.

Up Next: Realme 5 vs Xiaomi Mi A3: Specs Comparison

The post How to root Xiaomi Mi A3 using patched boot image and Magisk appeared first on Gizmochina.

Rooting an Android device has become quite easy with a single quick interface. The custom recoveries like TWRP, Philz, and others even facilitates the users with their GUI interface. The users can also root without the PC nowadays, but the compatibility of rooting using the mobile itself is limited to some popular devices. In today’s writeup, we will let you know how you can install TWRP Recovery and root Xiaomi Redmi Note 7 Pro using Magisk.

TWRP which stands for TeamWin Recovery Project. It is an open-source and entirely GUI based custom recovery for Android devices. It allows Android users to enjoy fully touch-based UI and flash custom ROMs, MODs, Magisk, SuperSu, etc. TWRP is a door to install different customization modules with ease. It even supports full system backups of the current system state which are impossible without the custom recovery.

Advantages of Custom Recovery

• Easy Full-System backups
• Flash image file on the device.
• Adds the ability to remove bloatware from the stock ROM.
• Supports underclock and overclock of the processor.
• Quickly flash custom ROM, MOD, Framework.
• Support to quickly flash Xposed and Magisk Framework.
• Easy installation of SUperSu and Magisk for rooting
• Ability to wipe cache and data.

Xiaomi launched Redmi Note 7 Pro a few months ago with some attention-grabbing features. It debuted along with its younger feature-packed sibling – Redmi Note 7. There are some incredible features such as a 48-megapixel rear camera, an Octa-Core Snapdragon 675 processor, 4000 mAh battery and latest Android 9.0 Pie. The device carries a 6.3-inch full-HD+ display having the resolution of 1080×2340 pixels. It is protected with Corning Gorilla Glass 5. It can rapidly charge the 4000 mAh battery with Qualcomm’s Quick Charge 4.0.

Note: GizmoChina.com is not responsible for any kind of damage to data or device while performing the unlocking. It will also void the device’s warranty and remove all data on the device. You’re proceeding at your own risk.

Install TWRP on Redmi Note 7 Pro

It is recommended that you carefully follow all the steps mentioned below.

Pre-Requisites:

• Make sure your battery is charged above 50%.
• Backup your Data on any external media or perform a Nandroid backup.
• Download ADB and Fastboot Drivers on the PC/Laptop.
• Download latest Xiaomi USB Drivers on the PC
• Download and save twrp-3.2.3-violet.img it to the Extracted folder of ADB – Fastboot drivers.
• Unlocked Bootloader of Xiaomi Redmi Note 7 Pro.

Steps to install TWRP on Redmi Note 7 Pro

1. If Redmi Note 7’s Bootloader is unlocked, then you’re good to go with the next steps.
2. Enable the Debugging Mode, and OEM unlock on your device. Both the options can be found in the Developer Options.
3. Now, connect your device with PC via USB cable.
4. Extract ADB and Fastboot drivers in a folder on the PC. Then, Open the cmd or PowerShell by pressing Shift key + Right-Clicking in the same folder.
   
5. Once all the setup is complete, type the following command to reboot the Redmi Note 7 Pro into the fastboot mode (Note: Accept a pop-up asking for the USB debugging permission on your smartphone).

   adb reboot bootloader

6. After booting into the fastboot mode, type the below-mentioned command to flash the TWRP image you download. (Note: Place the twrp-3.2.3-violet.img file in the ADB and Fastboot extracted the folder.)

   fastboot flash recovery twrp-3.2.3-violet.img

7. After the successful flashing, reboot the device using the following command:

   fastboot reboot

8. Enjoy!

You have successfully installed TWRP Recovery on Xiaomi Redmi Note 7 Pro. In the next step, we will flash Magisk to get root access on teh device.

Root Redmi Note 7 Pro using Magisk

Make Sure to download the Magisk zip and Disable Encryption patch and move them to the phone’s storage.

• • Download Magisk.Zip and Disable Force Encryption Treble and move them to the Phone storage.

1. After rebooting, connect your device with the PC to get root access.
2. Type the ADB command to boot into the TWRP recovery successfully:

   adb reboot recovery

3. The device will automatically boot into TWRP, now take a NANDroid backup if you need data.
4. Now, Select “Install” from the TWRP and browse for the Magisk.zip file. Tap on it to select it.
5. Now, “Swipe to confirm flash” action.
6. Upon successful installation, select “Install” once again and locate “no-verity-force-encrypt.zip” file. Tap it to select it.
7. Again “Swipe to confirm flash” action.
8. Reboot System from TWRP Recovery.
9. Upon rebooting, a Magisk Manager application will be present from where you can control the access of each app.
10. You can also install the Root Checker app to verify root access.

We hope you’ve successfully rooted Xiaomi Redmi Note 7 Pro with Magisk. If you have any queries or any doubt, let us know via comments.

Up Next: How to Unlock Bootloader of Xiaomi Redmi Note 7 Pro

The post How to install TWRP Recovery and Root Xiaomi Redmi Note 7 Pro using Magisk? appeared first on Gizmochina.

It’s been only a few days since the OnePlus 7 series launch, and the developers have even achieved root access on the OnePlus 7 Pro. XDA member mauronofrio extended support of unofficial TWRP for OnePlus 7 Pro. Now users can easily install TWRP on OnePlus 7 Pro to get root access with Magisk or SuperSu. It is always recommended to root Android phone to customize the whole firmware.

OnePus 7 Pro carries a massive 6.67-inch QHD+ Fluid AMOLED curved display with a 90Hz refresh rate and HDR10+ support. Qualcomm Snapdragon 855 SoC powers it with RAM upto 12GB and 256 UFS 3.0 internal storage. There’s a triple rear camera module carrying a 48MP Sony IMX586 sensor with OIS and EIS, an 8 MP Telephoto lens and a 16 MP 117-degree ultra-wide angle camera. On the front, there’s a 16MP pop-up selfie camera. It packs a 4000 mAh battery with Warp Charge 30.

The proud owner of OnePlus 7 Pro can now customize their smartphones using custom recoveries, ROMs, Mods, and Kernels using TWRP. It stands for TeamWin Recovery Project and is an open-source custom recovery for Android devices. If you’re a first-timer, then follow the guide to install TWRP on OnePlus 7 Pro and then root carefully.

Note: Installing custom recovery will void your warranty. It is recommended to follow the steps carefully. Otherwise, you may brick your device. GizmoChina is not responsible for any kind damage or data loss. You should proceed at your own risk.

Guide to Install TWRP on OnePlus 7 Pro

This guide is solely for OnePlus 7 Pro, using the same recovery on other devices will lead to damage. Before flashing TWRP, users need to go through the requirements below.

Pre-Requisite:

• The bootloader of OnePus 7 Pro should be unlocked
• Charge your phone up to 70%.
• Laptop or PC is needed.
• Install the latest OnePlus USB Drivers
• Running latest OxygenOS

Downloads:

• Download TWRP Recovery from here.
  Download TWRP Installer from here.
• Rooted OnePlus 7 Pro boot image: OOS 9.5.3 Patched | OOS 9.5.4 Patched (bymauronofrio xda)
  Note: If your device is running on Oxygen OS 9.5.3, then download OOS 9.5.3 patched boot image, otherwise use the OOS 9.5.4 for Oxygen OS 9.5.4.
• Download Android SDK Tools on your Computer.

Steps to install TWRP on OnePlus 7 Pro

1. Enable USB Debugging and connect your device with Computer.
2. Open Command prompt or PowerShell by going to the extracted ADB Folder in your PC/Laptop.
   
3. Now connect your Mobile with the Computer via USB.
4. Copy TWRP zip and Magisk Manager apk file into phone’s internal storage.
5. Reboot your device into bootloader by typing the command in CMD:

   adb reboot bootloader

6. Check the slot which is active by typing the command below:

   fastboot getvar current-slot

7. Select the non-active slot and change slot-name with actual slot name (delete inverted commas also).

   fastboot --set-active="slot name"

8. Now flash the TWRP on your device by replacing the recovery-name.

   fastboot flash recovery recovery-name.img

9. Now reboot the device from TWRP Recovery, and select the previously active slot by:

   fastboot --set-active="slot name"

10. Now Go back and Install the TWRP Installer.
11. Once done, then reboot.

You have successfully installed OnePlus 7 Pro on OnePlus 7 Pro.

How to root OnePlus 7 Pro (Magisk)

Once you have successfully installed TWRP on OnePlus 7 Pro, you can proceed to root Oneplus 7 Pro. Follow the steps below carefully

1. Install Magisk apk on OnePlus 7 Pro.
2. Now connect your PC with mobile.
3. Reboot your device into bootloader, and open the command prompt by pressing shift+right-click and open “Windows Powershell” or ” open command windows here.”

   adb reboot bootloader

4. After the device is successfully connected, type the fastboot command to flash patched boot image:

   fastboot flash boot boot_patched.img

   fastboot reboot

You’ve successfully rooted OnePlus 7 Pro with Magisk. If there’s any query, you are open to ask below.

The post How to install TWRP and root OnePlus 7 Pro using Magisk? appeared first on Gizmochina.

Redmi launched the Redmi K20 Pro in China last month carrying high-end specifications. Due to the device’s affordability and competitive specs, it is getting tremendous response from buyers. It has even received enough attention in a short period from the third-party developers. The users can now install TWRP and root the Redmi K20 Pro.

Redmi K20 series is now coming to some new markets after the initial launch in China. The Redmi K20 Pro carries top-notch Snapdragon 855 SoC that features single core at 2.84GHz, three cores at 2.42GHz and the remaining four cores at 1.8GHz. The device is available with 6/8GB RAM and 64/128/256 GB Internal storage. In optics, there’s a triple rear camera module with 48MP+8MP+13MP primary camera and a 20 MP front camera for selfies. The device carries a premium look and has a pop-up module housing a front selfie camera. The device carries a connectivity option such as Wi-Fi 802.11 a/b/g/n/ac, Bluetooth v5.00, NFC, Infrared, USB Type-C, 3G, and 4G. The phone includes accelerometer, ambient light sensor, compass/magnetometer, gyroscope, proximity sensor, and fingerprint sensor.

Rooting the Redmi K20 Pro allows users to modify the system. It aids customizability on the device with the help of third-party recoveries, MODS and other tweaks. Before rooting, we need to install a custom recovery like TWRP to install external flashable files, SUperSU, Mods, etc. TWRP is easy to install and use custom recovery. It even facilitates the nandroid backup of your device easily and effectively. However, it will result in the loss of warranty.

Note: GizmoChina.com is not responsible for any damage to the device and data. Rooting also voids the warranty of your device. 

Pre-requisites

• Make sure you have unlocked the bootloader of Redmi K20 Pro.
• Download ADB and Fastboot Drivers on PC.
• Download TWRP recovery image.
• Download Chainfire’s SuperSu
• Backup important data on your PC or any external media.
• You need a Laptop or PC.
• Ensure to keep at least 50% battery.

Steps to install TWRP on Redmi K20 Pro

Follow the steps below carefully, as missing any step would result in damaging the phone.

1. Extract ADB tools in a folder.
2. Download TWRP and move it into the extracted TWRP folder.
3. Now, Enable Developer Mode option by heading to the Settings>About Phone>Build Number and tap it 7 times to enable developer option.
4. Enable USB Debugging mode by heading to the Settings>Develper Option>Enable Debugging mode.
5. Open command prompt in the extracted TWRP folder by pressing Shift + Right Click on the mouse.
   
6. Power off the device and then boot your device into the fastboot mode by pressing the power + volume up button simultaneously.
7. Connect your device with PC via USB cable.
8. Verify the device’s connectivity status by executing the command below:

   adb devices

9. Type the command below to reboot into bootloader:

   fastboot reboot bootloader

10. Once into the bootloader mode, flash the TWRP by the following command. (Note: Replace the TWRP.img with the name of recovery).

    fastboot flash twrp.img

11. Once the installation is completed. You can type the command to reboot your device by typing:

    fastboot reboot

You have successfully flashed TWRP recovery on your device. Now, proceed with the below steps to root Redmi K20 Pro.

Steps to Root Redmi K20 Pro with SuperSu

SuperSu is a zip file by chainfire which allows users to gain root access. To flash it on the Redmi K20 Pro, follow the procedure below:

1. Download the latest SuperSu zip on your Phone, and then move it to the rot of the device.
2. Power off the Redmi K20 and then hold volume up + power button simultaneously to boot into the recovery.
3. Once in the TWRP recovery, press ‘Install‘ and then browse the SuperSu file.
   
4. Now flash the SuperSu zip after swiping the slider below.
5. After flashing, reboot your device and enjoy.

We hope you have successfully rooted the Xiaomi Redmi K20. If you have any issue or problem while performing the procedure above, then let us know via comments below.

Up Next: Top 4 Online Stores Where You Can Buy Xiaomi Redmi K20 Smartphone at Unbeatable Prices [Coupon]

The post How to Install TWRP on Redmi K20 and Root with SuperSu? appeared first on Gizmochina.

It’s been a few years since both the devices have launched. The OnePlus 3/3T has received their final significant updates of Android 9.0 Pie a few days ago. The official software is going to fade away this year for both the devices and the users have to rely on the third-party development for updates to the latest Android version. To facilitate users, we are here to let you know about the rooting procedure of OnePlus 3 and 3T.

The OnePlus 3T comes packed with Snapdragon 821, 6GB RAM, 64/128 GB internal memory, and a dual 16MP camera on the rear side. However, the OnePlus 3 carries a Snapdragon 820 SoC, 6 GB RAM with 64 GB Internal storage. It carries a 16-megapixel + 8-megapixel dual camera shooter on the rear side. On the front, there’s an 8-megapixel lens for beautiful selfies.

The OnePlus 3 was launched with Android 6.0 Marshmallow, and it received the Nougat update in the same year. It considerably received every Android update consistently.

The procedure to root either of the devices is the same. Rooting allows users to flash custom ROMS, and extend its functionality via third-party MODs such as Xposed and Substratum. It also allows removing unwanted stock apps from your device.

Note: GizmoChina.com is not responsible for any damage to data or device. You are performing the process at your own risk. It may also void your warranty.

Pre- Requisites

• Download and install ADB and Fastboot Drivers
• Download latest OnePlus drivers.
• Download SuperSU zip on your PC.
• Download the TWRP image and place it inside the ADB and Fastboot Driver’s folder.
• Backup data on the cloud or the external media.
• Unlocked Bootloader on OnePlus 3 and 3T.

Steps to Install TWRP on OnePlus 3/3T

1. Navigate to Settings > About Phone > Tap Build number 7-8 times to enable Developer Mode.
2. Now enable USB debugging, OEM unlocking and advanced reboot by heading to the Developer options.
3. Now, Connect OnePlus 3/3T with the USB cable.
4. Extract ADB and Fastboot drivers on your PC/Laptop.
5. Now, Press Shift+Right Click to open the command prompt in the extracted folder.
   
6. Once you opened Command Prompt, type the following command to check the device connectivity:

   adb devices

7. Now reboot the OnePlus 3/3T into the bootloader mode by typing the command:

   adb reboot bootloader

8. Verify the device’s connectivity once in the bootloader mode by executing:

   fastboot devices

9. To install the TWRP recovery, type the following command. (Note: Change the TWRP.img with the actual recovery filename)

   fastboot flash recovery TWRP.img

10. You have successfully installed TWRP Recovery.

The device will reboot a few times and will boot the device. You’ve successfully installed custom recovery on the OnePlus 3/3T

Steps to Root OnePlus 3/3T

To gain root access, follow the steps below carefully.

1. Boot into TWRP Recovery, if you have already unlocked the bootloader and custom recovery.
2. In TWRP go to advanced > ADB sideload > swipe to start sideload.
3. Now, execute the following command, and Super SU being the name of the zip file:

    adb sideload SuperSU.zip

4. Select Reboot System, and it’s done!

Following the above procedure, you would have successfully installed TWRP and gained Root access on OnePlus 3T device.

Up Next: Android Pie stable update rolls out to the OnePlus 3 and OnePlus 3T

(source)

The post How to Install TWRP and Root OnePlus 3 and 3T using SuperSU? appeared first on Gizmochina.

Poco F1 is one of the best budget flagships Xiaomi has ever made. It comes with all the features that you want in a high-end smartphone sans some negligible shortcomings. If you own a Poco F1 and to unlock the full potential of the phone, you might want to root it. Thus, here in this article, we will guide you step by step on how to root Poco F1.

Last year, out of the blue, Xiaomi formed a sub-brand named Poco focussing on budget flagship smartphones. The first phone which is Poco F1 or Pocophone F1 became popular in a short period and for a good reason. The phone features the top of the line Qualcomm Snapdragon 845 processor with Adreno 630 GPU coupled with either 6 or 8 GB of RAM. It comes in three storage variants – 6GB RAM / 64GB ROM, 6GB RAM / 128GB ROM, and 8GB RAM / 256GB ROM. Additionally, it also supports storage expansion up to 256GB via microSD card.

Though the body of Poco F1 is made of polycarbonate (plastic), it is strong enough to withhold accidental drops, and therefore it is much better than the fragile glass back we seen on premium smartphones these days. As far as cameras are concerned, the phone features a dual camera array at the back which consists of a 12MP primary sensor with f/1.9 aperture and a 5MP depth sensor. The camera specification might seem outdated as all OEMs including Xiaomi have moved to triple or more cameras now. But the pictures taken on Poco F1 are still better than the phones available in the same price segment.

The only downside which we could think of Poco F1 would be its 6.18 inches FHD+ (1080 x 2246 pixels) IPS LCD with a wide notch. However, it makes up that by including an infrared face recognition system in that notch along with a 20MP selfie camera with f/2.0 aperture. The phone also comes with all the necessary sensors such as fingerprint, proximity, accelerometer, gyro, and compass. The connectivity features of the phone include LTE, WiFi 6, Bluetooth 5.0, GPS, USB type-C, and headphone jack.

On the software front, the Poco F1 launched with MIUI 10 based on Android Oreo and was later updated to Android Pie. The phone is also expected to get Android Q as confirmed by the company itself. Last but not least, it consumes power from a non-removable 4,000 mAh battery with support for 18W fast charging.

Related: Xiaomi Poco F1 MIUI 10.3.4 update brings Widevine L1, 4K 60fps video recording, Game Turbo and more

Since we are done with the introduction of Poco F1, let us go through our step by step guide on how to root it. Make sure to follow each step carefully to avoid any error. Before proceeding, we would recommend you to take a backup of your important files stored on your phone to avoid data loss if anything goes wrong.

Prerequisites for rooting the Poco F1

• Poco F1 with bootloader unlocked
• Windows PC / Laptop
• ADB and Fastboot drivers
• Xiaomi USB Drivers
• USB cable
• Download Custom Recovery (TWRP 3.2.3 preferable)
• Download Magisk – Systemless Root
• Forced Encryption Disabler: Disable-Force-Encryption-Treble.zip

If you haven’t unlocked the bootloader of your Poco F1 yet, then consider doing it first as the phone cannot be rooted with a locked bootloader.

Steps to Install TWRP Recovery on Poco F1: 

• Enable USB Debugging on your Poco F1, found under ‘Developer options.’
• Download the official TWRP img file for Poco F1 and Magisk zip file.
• Copy the TWRP img file to the ADB and Fastboot directory on your Windows PC / Laptop. Whereas, copy the Magisk zip file to your phone.
• Connect your phone to your Windows machine via USB cable.
• Open command prompt in the ADB and Fastboot directory by typing cmd in the address bar located at the top.
  
  
• Execute the following commands to flash the official TWRP on your Poco F1:

  adb reboot bootloader

• Flash TWRP recovery by running the command below:

  fastboot flash recovery twrp-3.2.3.0-beryllium-20180831.img

• Then, execute the following command:

  fastboot boot twrp-3.2.3.0-beryllium-20180831.img

You have successfully installed the TWRP custom recovery on Xiaomi Poco F1.

Steps to Root Poco F1

To gain root access, follow the steps below to flash Magisk Module to learn the root access.

• After executing the above command, you will automatically boot into TWRP recovery.
• Tap on ‘Install‘ and select the ‘Disable-Force-Encryption-Treble.zip‘ file. Then swipe to confirm the installation.
• In the recovery, go to ‘Install’ and select the Magisk zip file to install on your phone.
• After the installation of Magisk, reboot your phone by navigating to  Reboot -> System.
• That is it, and you have successfully rooted your Poco F1. If you are facing any error or difficulty, then do mention them in the comment section below. We will try our best to help you as soon as possible.

Up Next: Poco F1 6GB + 64GB model gets price cut in India, now costs Rs. 17,999 ($260)

The post How to install TWRP and Root Poco F1 using Magisk ? appeared first on Gizmochina.

Xiaomi always stuns its users with new smartphones and other smart products. The company is always known for its smart take on the daily use products. Along with China, it is quite popular in India and some other countries in terms of the total smartphone market share.

Xiaomi recently announced its new flagship device – Xiaomi Mi 9 with some high-end specifications. It carries a 6.39-inch HD+ display with an aspect ratio of 19.5:9. It is powered by a Qualcomm Snapdragon 855 chipset coupled with a 6 GB RAM. There’s a triple rear camera module with a 48-megapixel primary camera, a 12-megapixel secondary camera, and another 16-megapixel camera. On the front, there’s a 20-megapixel camera for selfies. It runs on the Android 9.0 Pie atop MIUI 10. The device is available with 128GB internal storage variant. The connectivity includes a Bluetooth 5.0, Wifi, USB Type-C, 3G and4G support.

Amid huge popularity, Xiaomi unveiled its Kernel source code. It facilitates third-party developers to tinker its code and develop various new custom ROMs and MODs. To use the new modifications, users need to root Xiaomi Mi 9 after unlocking its bootloader. Follow the guide carefully to successfully root Mi 9 without any issue.

Note: This guide is only for Mi 9 device bearing codename Cepheus. Tinkering the firmware of your device is not permitted by any manufacturer, it will void the warranty. GizmoChina.com is not responsible for any damage to your device and data. You’re are performing this modification on your own.

Merits of rooting Xiaomi Mi 9

• It allows modifying the firmware as per the need.
• Users can overclock the processor to attain maximum performance.
• It can also improve battery life
• The major problem of bloatware on Xiaomi devices is another major reason to root it.
• Customize every setting using the Xposed framework.

Pre-Requisites:

• Backup important data on the cloud or on other physical media.
• Laptop or PC is required for the root process.
• Keep your phone 70% charged at least.
• Download and Install the latest Xiaomi USB Drivers.
• Download ADB and Fastboot drivers and extract it on your pc.
• Download Chainfire SuperSu.zip to root the Xiaomi Mi 9.
• Get supported TWRP for Mi 9 (cepheus).
• Ensure the Xiaomi MI 9 bootloader is unlocked.
• Download disable force encryption zip to disable the Encryption.
• DM Verity disabler download

Steps to root Xiaomi Mi 9 using SuperSU

Follow every step carefully to successfully attain root access on the device.

1. Install required Xiaomi USB drivers on the PC.
2. Extract the ADB and fastboot utility on the PC and open the command prompt or terminal by pressing shift + right-click anywhere in the extracted window. Also, move the downloaded TWRP.img into the same folder.
   
3. Enable USB Debugging Mode by going to settings -> Open developer option -> Enable USB Debugging.
   
   
4. Connect the Mi 9 to the PC using the USB cable.
5. Reboot the Mi 9 into bootloader mode by pressing and holding the volume keys + Power key for about 10 seconds or by typing the below command:

   adb reboot bootloader

6. Tap OK, when your device will ask for permission to “Allow USB debugging“.
7. To flash the TWRP on the device, type the following command. (Note: replace the recovery.img with the actual name of twrp recovery.img file.)

   fastboot flash recovery recovery.img

8. Now, wait for the flashing process to complete. Once done, reboot the device by executing the following command:

   fastboot reboot

9. While the phone is booting, press and holds power + volume up to reboot into TWRP Recovery. (Note: This step is performed to disable force encryption before booting the device.
10. Once in the TWRP, disable the encryption by flashing the Disable Force Encryption zip.
11. Now reboot the phone and enjoy!

You have successfully installed the TWRP on Xiaomi Mi 9. Now, to attain the root priveleges we need to flash SuperSu zip via TWRP recovery.

Steps to root Xiaomi Mi 9 using SuperSu

It is always a cumbersome process to root any Android device. We have to install third-party recovery to run SuperSu or Magisk to get root privileges. Follow the steps below to root the Xiaomi Mi 9:

1. Download the SuperSu zip and no verity encrypt zip from the Pre-Requisites section above and copy them to the Phone’s internal storage.
2. Now, reboot Xiaomi Mi 9 into the TWRP recovery.
3. Take a backup from the TWRP recovery if you want of your current ROM. Tap backup> Select Partitions > data, system, boot > and swipe to take backup.
4. Now, tap install and select the SuperSu zip file from the phone storage. You need to “Swipe to confirm” flash.
5. Once done, flash the no variety encrypt zip file in a similar way.
6. Reboot system.
7. Hurray!! Your device is rooted.

We hope you have successfully rooted Xiaomi Mi 9 using our guide. If you have any problem or error, just let us know via comments below.

The post How to Install TWRP on Xiaomi Mi 9 and Root with SuperSu? appeared first on Gizmochina.

This video will show you how to in a couple of easy steps:

The fill needed are here anexonel.com.

Also do not forget to subscribe!(Tip: Giveaway)

The post How to Root the Goophone N2 or other MT6577 Devices appeared first on Gizmochina.