Poco is slowly and gradually expanding its products portfolio after parting ways with Xiaomi as a separate brand. The company recently unveiled the Poco X3 NFC edition featuring some advancements over the Poco X2 which was launched back in December 2019. The new device features a lot of exciting specifications at a much affordable price. Such devices are a delight for the custom development community too as the companies indirectly support third-party development.

Must See: First custom ROM for POCO X3 arrives within a month of its launch

It’s just been a few weeks and the root access Poco X3 NFC is already here. The interested users can easily root their Poco X3 NFC units after easily unlocking the bootloader.

Poco X3 NFC Specifications

Unlike Poco X2, the Poco X3 NFC features a single punch hole camera cutout in the display for a better viewing experience. It houses a 6.67-inch full HD+ IPS LCD display protected with Corning Gorilla Glass 5 protection. It can bring exemplary gaming experience with a 120Hz refresh rate using Dynamic Switch.

In the camera department, the smartphone comes with a quad-camera setup featuring a 64-megapixel Sony IMX682 camera sensor for quality photos. It is accompanied by three additional cameras on the rear including a 13-megapixel ultrawide sensor, a 2-megapixel depth assist sensor, and another 2-megapixel macro lens.

The smartphone is powered with Snasdpragon 732G chipset coupled with LPDDR4x RAM and UFS 2.1 storage. Itis available in two different storage variants including a 6GB RAM + 64GB storage and 6GB RAM + 128GB storage. The smartphone is available in two color options of Shadow Grey and Cobalt Blue.

It measures 165.3 x 76.8 x 9.4mm and it weighs 215 grams. Moreover, you will find a side-mounted fingerprint reader, an IR blaster, dual SIM support, 4G VoLTE, Wi-Fi 802.11ac, Bluetooth 5.1, GPS, USB-C, and a 3.5mm headphone slot.

Note: Gizmochina.com is not responsible in any way for the loss of data and devices. You’re proceeding at your own risk as in some cases it will even void your warranty. 

Overview

1. Unlock Bootloader
2. Install TWRP
3. Root Using Magisk

Unlock Bootloader of  Poco X3 NFC

Unlocking Poco X3 NFC will allow the user to root the device and install custom MODs and ROMs without any issue. It is advised to follow each step and download the required pre-requisites from the links below.

Pre-Requisites

• Download and Install ADB and Fastboot drivers on PC/MAC.
• Download Xiaomi USB Drivers.
• Download Xiaomi Mi Unlock Tool
• Ensure the phone’s battery is more than 60%
• Backup important data on any external media
• Download the latest TWRP from here.
• Download the latest Magisk manager and install it on your phone.

Steps to install TWRP on Xiaomi Mi A3

Follow the below-mentioned instructions carefully to successfully install TWRP. Before proceeding, please ensure your Xiaomi Mi A3 bootloader is unlocked.

1. Enable Developer Mode by tapping the MIUI version 7 times after heading to the Settings > About Phone.
2. Enable USB Debugging by heading to the Settings>Developer Option and toggle USB Debugging.
3. Bind your Mi Account which means sign in to the Poco device using your Mi account by heading to Settings > Additional Settings > Developer Options > Add account and device and log in.
4. Connect your smartphone with the PC via USB Cable.
5. Now boot into the Fastboot mode by pressing and holding Volume Down + Power Button for about 10 seconds. You need to release buttons once the Fasstboot appears on the screen.
6. Download and Extract Mi Unlock Tool from the Pre-Requisite section above.
7. Open the Miflash_unlock.exe file from the extracted folder.
8. Now, Login with the same Mi Account that you used on the Poco X3 NFC.
9. It will take some time to verify your smartphone, and will show “Phone Connected.“
10. Now, tap on the “Unlock button” and select “Unlock anyway” when prompted.
11. The unlocking process will start, and you will receive “Unlocked successfully” once completed.
12. Now, Reboot the device, and that’s it!

Root Poco X3 NFC (TWRP)

Make sure you’ve unlocked the bootloader in order to root your Poco X3 NFC.

Pre-Requisites

• Download TWRP Recovery for Poco X3 NFC
• Download Magisk Manager Installer Zip on your phone.

Steps

1. Download and Extract ADB and Fastboot utilities in a folder.
2. Now, Connect your Poco X3 NFC with PC using a USB cable. (Note: If prompted to “Allow USB Debugging” comes then tap OK on your phone.)
3. Open Command Prompt or Powershell by pressing SHIFT + RIGHT-Click in ADB and Fastboot folder.
4. Type the below command to restart the phone.

   adb reboot bootloader

5. Now Flash the TWRP on the recovery partition using the below-mentioned command. (Note: Make sure to replace the twrp-3.4-xx.img name with actual twrp filename.)

   fastboot flash recovery twrp-3.4.x-xx.img

6. That’s it! You have successfully Installed TWRP. Now, we need to install Magisk to gain root access.
7. Reboot into TWRP Recovery by executing the following command. (Or you can press and hold the Power button + Volume Up button to boot into recovery mode.)

   adb reboot recovery

8. Once in TWRP, then select Install>Select Magisk.zip>Swipe to Confirm Flash.
9. Reboot System after installation completes, and enjoy!

You’ve successfully installed TWRP and gained root access on Poco X3 NFC using Magisk. If you’ve any queries then do let us know via the comments below.

Related: POCO X3 NFC launching in Indonesia on October 15

The post How to unlock bootloader and root Poco X3 NFC appeared first on Gizmochina.

Realme is fiercely launching new devices to compete against the ever-increasing competition from the other OEMs, especially Redmi. Oppo’s subbrand is performing really in terms of sales and software support. The company is constantly rolling to upgrades to all the devices from entry-level to flagship-level. All the devices like Realme X2, Realme 5, Realme XT, Realme C3, Realme X, and various other smartphones have received Realme UI inspired by the stock Android design.

Must See: Realme 5 Pro vs Realme X2 vs Realme XT: Specs Comparison

Realme 3 Pro and Realme 5 Pro received the Realme UI update last month. The update disabled the usual process of unlocking bootloader, but Realme is to the rescue here as a new way is already available. We are today penning down a guide to unlock bootloader of Realme 3 Pro and Realme 5 Pro running Realme UI. Both the smartphones were launched with a difference of a few months last year. The Kernel Source code of both the devices based on Realme UI is already available for developers.

What is Bootloader Unlocking?

The smartphones usually come with a locked bootloader so that no one can manipulate the code and harm the unified experience of the OS. The bootloader code organizes what programs to run after boot. However, if you want to root any Android smartphone, the user first needs to unlock bootloader and then install custom recovery. There are several advantages of unlocking bootloader, but there’s also another side of the story. Let’s first see the merits of unlocking bootloader.

Merits of Unlocked Bootloader

• Brings the ability to unlock the smartphone
• Allows to install custom recovery
• It enables to flash any custom MOD

Demerits of unlocked bootloader

• Voids smartphone’s warranty

Note: Gizmochina.com is not responsible if any damage to your device or data occurs while following this guide. You are proceeding at your own will. Unlocking Bootloader or rooting the device will void the warranty. The device will not receive any official OTA update from the company. 

Unlock Bootloader of Realme 3 Pro and Realme 5 Pro

It’s quite easy to unlock Bootloader, only you need to follow the steps carefully.

Note: Keep in mind that after unlocking bootloader Widevine L1 will be replaced by Widevine L3. Moreover, the camera won’t work properly with third-party firmware.

Prerequisites:

• Download and Install ADB and Fastboot drivers on PC/MAC.
• Download Xiaomi USB Drivers.
• Download Unlock APK.
• Ensure the phone’s battery is more than 60%
• Backup important data on any external media
• You will need a USB cable for connectivity.
• Make sure to update your system to the latest one.

Steps to Realme 3 Pro and Realme 5 Pro bootloader unlocking

1. Install the Unlock Apk and tap on Start Applying button.
2. Read all the disclaimer in detail, select the checkbox, and submit the application.
3. Now, the application some time of up to 15 minutes for servers to evaluate your request and respond. If not, then wait for some more time.
4. If you request approved, then proceed with the following steps.
5. Tap on “Start the in-depth test” and your device will reboot. Now, the sting “fast boot_unlock_verify ok” will show on the display.
6. Extract the Fastboot tool in a folder on your PC or Macbook.
7. Use USB cable to connect your phone and PC.
8. Open CMD or Powershell in Fastboot Tool folder by pressing Shift + Right Click.
9. Type the following command to reboot the device into bootloader:

   adb reboot bootloader

10. Now to unlock the bootloader of any of the device user the command:

    fastboot flashing unlock

11. Now, press Volume Up key to select “Unlock The Bootloader”.
12. The device will erase all data and will reboot with an unlocked bootloader.

Now, the users are ready to install any custom Recovery or root Realme 5 Pro and Realme 3 Pro smartphone.

Realme 5 Pro and Realme 3 Pro specs

Realme launched both the smartphones last year featuring familiar specs with a difference of aa drop in ocean. The Realme 5 Pro hosts a Qualcomm Snapdragon 712 chipset featuring an octa-core processor and Adreno 616 GPU. It houses a 6.3-inch IPS LCD display with 1080 x 2340 pixels resolution and 19.5:9 aspect ratio. The smartphone features a 48-megapixel primary camera, an 8-megapixel ultrawide lens, a 2-megapixel macro, and a 2-megapixel depth sensor. A 16-megapixel shooter is present on the front for selfies. The users will get a 4035 mAh battery with 20W fast charging support.

Whereas, the Realme 3 Pro comes powered with Qualcomm Snapdragon 710 chipset coupled wan octa-core processor. It is available in three storage configurations of 64 GB + 4GB, 64GB + 6GB, 128GB + 6GB. There’s a 6.3-inch IPS LCD display with the 1080 x 2340 pixels resolution. However, the Realme 3 Pro camera features only a dual rear camera module with 16-megapixel primary and a 5-megapixels depth sensor. Surprisingly, you will get a 25-megapixel front for high-quality selfies and video calling. THe users will get a 4045 mAh battery with 20W fast charging.

We hope you have successfully unlocked Bootloader of Realme 5 Pro and Realme 3 Pro. If you get any problem, then do let us know via the comments below.

Related: How to get Pixel 4 like motion gestures on your Android smartphone?

The post How to Unlock Bootloader of Realme 3 Pro and Realme 5 Pro using Realme UI appeared first on Gizmochina.

Oppo’s sub-brand – Realme recently unveiled Realme X2 Pro featuring Snapdragon 855 Plus chipset and a high-end Super AMOLED display. Realme made an entry into an affordable premium smartphone market with the Realme X2 Pro. It is set to compete against the OnePlus 7T Pro and Redmi K20 Pro. Apart from the hardware specs, the third-party development has also become a reason before buying a smartphone. In today’s article, we will guide users to unlock the bootloader of Realme X2 Pro easily (RMX1931).

Unlocking the bootloader of any Android smartphone is like a window to unlimited customizations. It opens doors to rooting the device and installing third-party recovery like TWRP. However, bootloader unlocking will void the warranty of your device. It is always recommended to follow the instructions carefully. Otherwise, you will end up with a bricked device. The Bootloader can also be relocked if it is not needed anymore.

Must See: Realme X2 Pro goes on Open Sale in India for a day as Black Friday sale kicks off

Realme X2 Pro Overview

The Realme X2 Pro is the company’s maiden premium flagship smartphone featuring a Qualcomm Snapdragon 855 Plus chipset coupled with Adreno 640 GPU. It is available in different storage variants including a 6GB + 64GB, 8GB + 128GB and 12GB + 256GB UFS 3.0 internal storage.

The smartphones feature a 6.5-inch Super AMOLED 90Hz refresh rate display having the resolution of 1080 x 2400 pixels. Moreover, its display supports 1000 nits maximum brightness level and supports HDR 10+. The device is encased in an aluminium frame and comes with a Corning Gorilla Glass 5 to protect against the frequent falls.

In optics, the Realme X2 Pro comes with a quad-camera module featuring a 64-MP primary camera, an 8-MP ultra-wide lens, a 13-MP telephoto lens, and a 2-MP depth sensor. There’s a 16-MP selfie camera on the front having an f/2.0 aperture for video calling.

The smartphone is backed by a 4000 mAh battery with 65W Super VOOC Flash Charge fast charging technology. There’s an in-display fingerprint sensor along with an accelerometer, proximity, gyroscope, and compass sensor.

Realme X2 Pro Bootloader Unlocking Guide

You can follow our simple guide below to unlock the bootloader of Realme X2 Pro.

Note: GizmoChina.com is not responsible for any damage to smartphone and data while unlocking the bootloader. The process will void your warranty.

Note: Widevine L3 will replace Widevine L1, and the fingerprint sensor will stop working until the bootloader is locked again.

Prerequisites:

• Keep battery charged atleast upto 50% for smooth unlocking.
• Make sure to back up essential data on any external media. The phone will be fully formatted, resulting in loss of data.
• A PC and a USB cable are necessary.

Downloads:

• Download and Extract ADB and Fastboot Drivers.
• Download Realme USB Drivers.
• Grab the Bootloader Unlock Tool App.

Steps to Unlock Bootloader of Realme X2 Pro

1. Make sure you have data backup on external media.
2. Update the Realme X2 Pro to the latest firmware version.
3. Download and Install the Bootloader Unlock tool apk from the link above.
4. Open the unlock tool and press start applying the In-depth test.
5. After reading the disclaimer, tap the checkbox and submit your applciation.
6. After submission, the unlock tool will show “Review successful” after an hour. The user can now proceed for the next steps.
7. Tap “Start the in-depth test” and the device will reboot.
   Note: The device will display fast boot_unlock_verify ok string.
8. Download and extract the fastboot tool in a folder via the above link in the download section.
9. Connect the phone to the PC via a USB cable.
10. Enter the following command to reboot into the bootloader mode.

    adb reboot bootloader

11. Now execute the command below to unlock the bootloader of Realme X2 Pro.

    fastboot flashing unlock

12. Now, press Volume Up to unlock the bootloader.
13. After, unlocking completes, Type the following command to boot the device.

    fastboot reboot

14. The phone will take some time to boot, and all the data will be erased.
15. The bootloader of Realme X2 Pro is successfully unlocked!

We hope you have successfully unlocked the bootloader of Realme X2 Pro. If you have any glitch while performing the above tasks, then make sure to comment below.

Related: Realme X2 Pro begins ColorOS 7 beta recruitment in India

The post How to Unlock Bootloader of Realme X2 Pro appeared first on Gizmochina.

Xiaomi recently unveiled the Mi A3 in India. It is the third consecutive device in the Mi A series which has been launched in India under the Android One program. The Chinese company has added various new advancements to the Mi A2 successor. The device is accompanied by a triple camera sensor, Super AMOLED display, and an in-display fingerprint sensor. In today’s writeup, we will help users to unlock the bootloader of the Xiaomi Mi A3.

Unlocking the bootloader is the first and the foremost thing to do before flashing any MOD or custom ROM. The unlocking opens the door for the users to tweak the system as per their own requirement. They can improve the performance and battery efficiency by removing unnecessary bloatware from the device. The ability to flash third-party recovery comes only after unlocking the bootloader.

Xiaomi Mi A3 Specifications

Xiaomi Mi A3 comes packed with Qualcomm Snapdragon 665 SoC coupled with 4GB RAM + 64GB storage and 6GB RAM + 128 GB Internal storage variants. For imaging responsibilities, the device is empowered with a triple rear camera sensor featuring a 48-megapixel primary sensor, an 8-megapixel secondary sensor, and another 2-megapixel wide-angle lens. On the front, a 32-megapixel selfie sensor is available with the ability to snap beautiful selfies and video calling.

It sports a 6.08-inch HD+ display with an aspect ratio of 19.5:9 and the resolution of 1560×720 pixels. As like its predecessors, the Xiaomi Mi A3 is also a part of Google’s Android One initiative and runs on Android 9.0 Pie out of the box. In Connectivity, the device includes 4G LTE, dual-band Wi-Fi 802.11 a/b/g/n/ac, Miracast, Wi-Fi Direct, Bluetooth 5.0, IR emitter and USB Type-C port. In a recent announcement, the company confirmed that Xiaomi Mi A3 will be the first device to get Android Q.

Note: GizmoChina.com is not responsible for any kind of damage to data or device while performing the unlocking. It will also void the device’s warranty and remove all data on the device. You’re proceeding at your own risk.

Pre-Requisites:

• Download the latest Xiaomi USB Drivers.
• Don’t forget to install ADB and Fastboot drivers on PC/Laptop.
• Backup important data on any external media as unlocking bootloader will wipe the data from internal storage.
• Make sure the device is charged at least up to 60%.

Steps to unlock Xiaomi Mi A3 Bootloader

Follow all the steps carefully, otherwise, your device may brick.

1. Enable Developer Mode by tapping MIUI version 7 times after heading to the Settings > About Phone.
2. It is also recommended to enable OEM Unlocking and Mi Unlock Status in the Settings > Additional Settings > Developer Option.
3. Download and set-up the ADB and Fastboot tools on your PC. (Note: Extract the downloaded tools zip in a folder on desktop)
4. Now, connect your Xiaomi Mi A3 with the PC via a USB cable.
5. On the PC, open the ADB and Fastboot Tools folder, and open the CMD or Powershell Window by pressing the Shift + Right Click.
6. Type the following command to reboot the device into bootloader mode:

   adb reboot bootloader

7. Execute the following command to check whether the device is connected or not.

   adb devices

8. Now, accept the pop-up message to “Always allow from this computer” by pressing OK.
9. To unlock the bootloader, type the below command:

   fastboot flashing unlock
   

10. Xiaomi Mi A3 will automatically boot the system, but you need to reboot into the fastboot mode by suing command state in step 6.
11. After booting into fastboot mode, execute the command to attain full unlock:

    fastboot flashing unlock_critical

12. Xiaomi Mi A3 will reboot into normal mode after successful completion.

That’s it from our side, and you can now install different tweaks, ROMs and root the device. If you get any problem while performing the task, do let us know via comments below.

Up Next: Xiaomi Mi A3 vs Realme 5 Pro vs Redmi Note 7 Pro: Specs Comparison

The post How to Unlock Bootloader of Xiaomi Mi A3? appeared first on Gizmochina.

Xiaomi launched the Xiaomi Redmi Note 7 and Redmi Note 7 Pro in March, and after few months it surfaced in India. Due to their extraordinary feature-set at an ordinary price, it generated good sales. Many of the users are looking to root the Xiaomi Redmi Note 7 Pro to get some customization ability. Today, We will let you know about the procedure to unlock the bootloader of Xiaomi Redmi Note 7 Pro.

Xiaomi Redmi Note 7 Pro is the new mid-range device powered by Qualcomm Snapdragon 675 chipset carrying an octa-core processor (2GHz dual-core Kryo 460 + 1.7GHz Hexa-core Kryo 460). It comes with 4/6GB RAM and 4/128GB internal storage variants. The device runs on the latest Android 9 Pie with MIUI 10 on the top. In Optics, it carries a rear dual-camera with 48 MP primary sensor and a 5 MP depth sensor. It features Dual-LED flash, and HDR and panorama mode. There’s a 13 MP front camera for beautiful selfies with HDR capability. It can easily sustain a day of rigorous usage with 4000 mAh Li-Po battery. Xiaomi has equipped it with 18W fast battery charging.

Related: Top 5 Inexpensive Phone Cases for your Redmi Note 7 and Redmi Note 7 Pro Smartphones

Advantages of Bootloader Unlocking

Unlocking the Bootloader is the first and the foremost step in the rooting process of an Android device. It becomes impossible for some devices to get root access without unlocking the bootloader. The bootloader unlocking wipes data and voids the warranty. However, some OEMs gives a guarantee even after the device gets rooted. Unlocking is a path to get more access, customizability via MODs or custom ROMs and frameworks.

Furthermore, it will even help you to remove unnecessary bloatware on the top of MIUI 10, improving the speed and battery backup of the device.

Note: GizmoChina.com is not responsible for any kind of damage to data or device while performing the unlocking. It will also void the device’s warranty and remove all data on the device. You’re proceeding at your own risk.

Guide to Unlock Bootloader of Xiaomi Redmi Note 7 Pro

We recommend you to go through each step very carefully to successfully unlock the bootloader of Xiaomi Redmi Note 7 Pro.

Pre-Requisites:

• Download and Install ADB and Fastboot Drivers on PC/Laptop/Mac.
• Download latest Xiaomi USB Drivers on the PC.
• Get Xiaomi Mi Unlock tool from here.
• Mi Account to get the authorization for bootloader unlocking.
• Make sure the device is at least 50% charged.
• Backup all the important data as the process will fully reset the device.

Steps to Unlock Redmi Note 7 Pro Bootloader

1. Enable Developer Mode by heading to the Settings > About phone and Tap the MIUI version 7 times to enable developer mode.
2. Now, enable OEM Unlocking by going to the Settings> Additional Settings > Developer Option.
3. Also, Agree with the Mi Unlock Status in Settings >Addtional Settings > Developer Option > Agree.
4. Now, goto Mi Unlock Site and click the “Unlock Now” button.
5. Log in with your Mi Account, and if you don’t have one, you can then Signup on the same page.
6. Enter your mobile number for an OTP.
7. You will have to wait for some time to get the application accepted.
8. Once the application is approved, you will receive an OTP. (Note: It may take several days to get the confirmation message.)
9. Download the Mi Unlock Tool and extract it to the folder.
10. Boot the device into the fastboot mode – turn off the Redmi Note 7 Pro and then Press and hold Volume Down + Power button for a few seconds to boot the device into the fast boot mode.
11. Now, connect the device to the PC with the USB cable.
12. Open the MiFlashUnlock from the folder that you extracted and Login with the same ID as on your Redmi Note 7 Pro, and enter your mobile number for an OTP.
13. Once done, Reboot it from Mi Unlock Tool.
14. Enjoy!

You have successfully unlocked the bootloader of Xiaomi Redmi Note 7 Pro. If you have any issues, then let us know via the comments below.

Stay connected with us for new customization guides!

Up next: Ultimate guide to enable Dark Mode in Google Apps – Google Chrome, Calendar, Photos, News, Discover, Keep and others

The post How to Unlock Bootloader of Xiaomi Redmi Note 7 Pro appeared first on Gizmochina.

Xiaomi is a popular Chinese electronics maker, known for its affordable smartphones throughout the globe. Xiaomi recently rebranded the famous Redmi brand into a separate company. The Redmi K20 is the new flagship from the same company. In today’s writeup, we will unlock the bootloader of Xiaomi Redmi K20 Pro.

After several rumors and leaks, Xiaomi unveiled the Redmi K20 a couple of months ago in China. The device comes packed with Qualcomm Snapdragon 855 SoC coupled with 6/8 GB RAM and 64/128/256 GB internal storage variants. It carries a triple rear camera unit including Sony IMX586 48-megapixel primary sensor with f/1.75 aperture, a 124.8-degree 12-megapixel superwide camera lens and an 8-megapixel telephoto lens with f/2.4 aperture. On the front, the pop-up camera houses a 20-megapixel sensor with f/2.0 aperture for beautiful selfies. Furthermore, there’s a 6.39 inch AMOLED display with an aspect ratio of 19.5:9 and has a 1080 x 2340 pixels of resolution. To protect eyes from the strain while using the phone in low-brightness, it hosts DC dimming to protect eyes. Other features include Android 9.0 Pie, 4000 mAh battery with 27W fast charging technology, and usual connectivity options.

What is Unlocking a Bootloader of Xiaomi Redmi K20 Pro?

Usually, an OEM or manufacturer locks the bootloader to prevent users from doing changes to the firmware. It is the first and the foremost step before rooting the Android device. It allows users to flash a custom recovery like TWRP and later enables the ability to install custom ROMs. There are many other advantages and disadvantages of unlocking a bootloader.

Note: GizmoChina.com is not responsible for any damage to smartphone and data while unlocking the bootloader. The process will void your warranty.

Pre-Requisites: 

• Download and Extract ADB and Fastboot Drivers.
• Download latest Xiaomi Redmi K20 USB drivers on your PC.
• Keep your device charged up to 70%.
• Backup important data on any external media.
• Download the Mi unlock Tool.

Steps to Unlock the bootloader of Xiaomi Redmi K20

Unlocking Method 1:

1. Enable Developer Mode by heading to the Settings> About Phone>Build Number and then tap it for seven times.
2. Now, toggle USB Debugging mode, OEM unlock option by heading to the Developer Option.
   
3. Before proceeding, head over to the Mi unlock site and click “Unlock Now” to apply for unlocking the bootloader.
4. Type every information they need. Xiaomi will verify the device by sending the security code on your device to verify the actual owner.
5. After applying, it will take 3-4 days to approve your application. Once you received the notification, you can proceed with the steps ahead. (Note: Steps Below should be performed after receiving application approval.)
6. Download and Extract the Mi Flash Unlock tool on the PC.
7. Upon extracting, open MiFlashUnlock.exe file from the folder and click Agree on the disclaimer page.
8. Open the Mi Unlock tool and sign-in with the same Mi account you logged-in on the Redmi K20 Pro.
9. Reboot your device into the Fastboot mode by pressing Power + Volume Down.
10. Now, connect your Xiaomi Redmi K20 Pro with your PC via a USB cable.
11. In the Mi Unlock Tool, you will see the “Unlock Now” option.
13. Press the “Unlock Now” button, and the tool will automatically unlock the Redmi K20 Pro.
14. Upon successful completion, you will get ‘Your device bootloader is unlocked‘ message.
15. Restart the device and enjoy!

You have successfully unlocked the bootloader of Redmi K20 Pro. Now, users can install TWRP and root Redmi K20 Pro. If you have any queries and issues, do let us know via comments below.

Up Next: Redmi K20 Pro Marvel Hero Limited Edition smartphone launched in China

The post How to Unlock Bootloader of Xiaomi Redmi K20 Pro appeared first on Gizmochina.

POCO F1 is still Apple of the eyes for many due to its outstanding hardware at a lucrative price. The remarkable software support that Xiaomi has been giving to the Snapdragon 845 powered device elevates its value even further. Nonetheless, there are folks who might want to go extreme with the device by rooting or installing custom ROMs. So, for any Android devices, unlocking the bootloader is the first hurdle to unlock all other possibilities. Here, let’s discuss how to unlock the bootloader of POCO F1.

It’s pertinent to mention here that, the bootloader unlock method for the POCO F1 is the same for both the Android Oreo and the Android Pie. That is you have to first apply for the bootloader unlock request, enabling OEM to unlock from the developer option and then finally unlocking using Mi Flashtool. Didn’t get it? Don’t worry, go through the step by step procedure given below.

Pre-Requisites:

• Backup all important data on another device.
• Charge its battery upto 70%.
• Always recommended to follow every step precisely.

Downloads

You may require following files for the smooth unlocking process. Download and save/install them on your PC before proceeding with the steps given above.

• Minimal ADB Fastboot
• Xiaomi USB Drivers

Steps to unlock Bootloader of the Poco F1 Bootloader

Warning: Bootloader unlock wipes the data/internal storage. So, backup your personal and important files before proceeding.

1. First and foremost, visit the MIUI Unlock website, and fill out the official bootloader unlock request form (requires an MI account). It’d take 2 to 4 days for the Mi team to accept the request and a code will be sent.
2. When you receive your code, go to Settings > About Phone > tap “MIUI Version” 7 times to unlock Developer Mode.
3. Go to Additional Settings > Developer Options > enable USB Debugging and OEM Unlocking.
4. Now download the Mi Flashtool and run it as Administrator on your computer.
5. Sign into your Mi account in the Mi Flashtool, and make sure you are also signed in on your Poco F1 with the same account (check in Settings > Mi Unlock Status > Add Account & Device).
6. Power-off the Poco F1, and reboot into Fastboot Mode (hold Volume Down + Power).
7. Connect your Poco F1 to the PC via USB, and click the ‘Unlock’ button in Mi Flashtool.
8. Your Poco F1 will be unlocked and factory reset. When the process is finished, you can launch an ADB terminal and check if it was successful by typing:

   fastboot oem device-info

9. If your bootloader was successfully unlocked, the ADB terminal should display “Unlocked”. If not, repeat the procedure once again. It should work unless a serious issue with the device or software itself.

In case of any further assistance, don’t forget to drop in the comments section.

Up Next: Poco F1 6GB + 64GB model gets price cut in India, now costs Rs. 17,999 ($260)

The post How to Unlock Bootloader of Poco F1? appeared first on Gizmochina.

OnePlus is always known for its affordable yet powerful devices. OnePlus 3 and 3T also follows the same regime and carries the flagship Qualcomm chipset of that time. In today’s writeup, we will guide you to unlock the bootloader of OnePlus 3 and 3T devices.

OnePlus 3 is powered with Snapdragon 820 with 6GB RAM and 64GB internal storage. It carries a 5.5 inch HD display with 1080 x 1920 pixels resolution. The device runs on the Android 9.0 Pie and weighs at 158 grams. In optics, there’s a single 16-megapixel camera on the rear side and another 8-megapixel camera on the front for selfies. Whereas, the OnePlus 3T got an upgrade of the dual 16MP camera and a 16MP camera on the front side with a smile capture feature. There’s also an upgrade of Qualcomm Snapdragon 821 chipset.

Rooting Process:

To root the OnePlus 3T and OnePlus 3, users have to unlock the bootloader, and then have to proceed for the installation of custom recovery and SuperSu/Magisk. Root Procedure involves these three steps:

Unlocking Bootloader: It is a lock which is applied by the OEMs to bare users from modifying the firmware or rooting the device. It is the first and foremost step to attain root access on any Android smartphone.

Custom Recovery: There are two types of recoveries – Custom and Stock. The custom recovery is flashed onto the recovery partition of the device to bring a lot of customizability rather than the stock recovery. It allows users to flash new MODs, create full backups, and perform data wipes efficiently.

Rooting: It is the final process to gain root access. The user can flash the SuperSU or Magisk to gain the root access.

This is the procedure to root every Android device. We need to follow the same method to root OnePlus devices after unlocking the bootloader. Let’s proceed with the unlocking bootloader of the OnePlus 3 and 3T.

Note: GizmoChina.com is not responsible for any kind of damage to data or device. You are performing the process at your own risk. It may also void your warranty.

Warning: Bootloader unlock wipes the data/internal storage. So, backup your personal and important files before proceeding.

Pre-Requisites:

• Download Fastboot and ADB drivers.
• Download OnePlus drivers on your PC.
• Backup the crucial data either on cloud or at other physical media.
• Keep your phone charged above 70%.
• Make sure the device is upgraded to the latest firmware, as there are some issues with TWRP on old firmware.

Minor Tweaks needed: 

1. Enable Developer Option by going to the Settings > About Phone > Tap on Build Number 7 times.
2. Now, Turn on USB Debugging Mode – Go to Settings > Developer Options > Toggle USB Debugging Mode.
3. Enable OEM Unlock – You will find the OEM unlock in the Setting > Developer Options. 
4. Also, enable Advanced reboot by going to the Developer Options and enabling the ‘Advanced Reboot’ option.

Steps to Unlock OnePlus 3/3T bootloader

1. Boot OnePlus 3/3T into fastboot mode either by long pressing the power button and then selection the Bootloader mode, or either pressing volume up + power button after turning off the device.
2. Now, connect your device to PC via USB cable.
3. Open the command prompt in the extracted ADB and Fastboot drivers window by pressing Shift + Right Click.
   
4. Verify the device’s connection by executing the following command.:

   fastboot devices

5. Now, unlock the bootloader by typing the following command:

   fastboot oem unlock

6. You will get ‘finished’ output in the command prompt and phone will reboot.

If you get any problem while unlocking the bootloader of OnePlus 3 series, then let us know via the comments below.

Up Next: Android Pie stable update rolls out to the OnePlus 3 and OnePlus 3T

The post How to Unlock Bootloader of OnePlus 3 and 3T? appeared first on Gizmochina.

Xiaomi Mi 9 is the flagship device of the Chinese smartphone maker. The successor of Mi 8 carries high-end specifications and features. Due to immense popularity, third-party developers have developed various new MODs, themes and custom ROMs for the device. Xiaomi Mi 9 recently attained the root access via TWRP recovery. In this guide, we will let you know the procedure to unlock bootloader on Xiaomi Mi 9.

Xiaomi Mi 9 comes equipped with a 6.39-inch display having a resolution of 1080 x 2340 pixels. It is powered by Qualcomm Snapdragon 855 SoC coupled with 6GB RAM and 128 GB internal storage. In optics, Xiaomi added a triple rear camera module comprising of a 48-megapixel primary camera, a 12-megapixel sensor, and another 16-megapixel camera. There’s a 20-megapixel camera on the front for selfies. It runs on MIUI 10 based Android 9.0 Pie. The dual-SIM smartphone offers Wi-Fi 802.11 a/b/g/n/ac, GPS, Bluetooth v5.00, NFC, USB Type-C, 3G, and 4G support.

Unlocking the bootloader is a significant task on any Android smartphone before customizing the firmware and rooting it. Xiaomi Mi 9 also comes with a locked bootloader and users have to unlock it, before modifying the system with new MODs. Unlocking the bootloader is a part of the rooting process. Users need to unlock the bootloader, then install the TWRP using fastboot and then root the device using Magisk or SuperSu.

Note: GizmoChina.com is not responsible for any damage to smartphone and data while unlocking the bootloader. The process will void your warranty.

Necessary Downloads

• Download Google ADB and Fastboot Tools
• Get latest Xiaomi USB Drivers
• Download Xiaomi Mi Unlock Software

Pre-requisites:

• Backup important data on your Xiaomi Mi 9.
• Maintain a 50-60% battery on the device.
• Carefully follow and execute the commands below.

Steps to Unlock Bootloader on Xiaomi Mi 9 

Unlocking the bootloader is the first and the foremost step in attaining the root access on any device. Today, we will unlock the bootloader of Mi 9. Follow the guide carefully:

1. Extract/Install the Google ADB and Fastboot Tools on the PC.
2. Install the Xiaomi USB drivers on the PC.
3. Enable Developer Option by tapping the Settings > About Phone > MIUI version 7 times.
4. Now enable the USB Debugging and the OEM Unlock option by heading to the Settings > Developer Options.
   
5. Now login to your Mi account by heading to the Settings > Mi account > Mi Cloud > Enable Sync and Find Device. (If other devices are in sync with the same account, we suggest to disable Sync on them temporarily.)
6. Download and Extract the Mi Flash Unlock tool on the PC.
7. Upon extracting, open MiFlashUnlock.exe file from the folder and click Agree on the disclaimer page.
   
8. Enter the login details of the same Mi account you logged-in on the Mi 9.
9. Now boot the device into the Fastboot/Bootloader mode by pressing and holding the volume keys + Power key for about 10 seconds.
   
10. After booting into fastboot mode, now connect it to your PC via the USB cable.
11. The Mi Flash Tool will show the Mi device as successfully connected.
12. Once connected, then click on the Unlock button.
    
13. The unlocking process will start, and once again press Unlock anyway button on the following popup.
14. Sometimes Xiaomi will make you wait for 48-72 hours to unlock a phone when it is at 90%. Otherwise, it will complete to 100%, and you will get ‘Unlocked Successfully’ notification. (If Xiaomi bars your device under the waiting window, then you have to repeat the process from step 10.)
15. Reboot your device after the process is completed.

If you get into any problem, let us know via comments below. We hope you have successfully unlocked the bootloader of Xiaomi Mi 9.

Up Next: Xiaomi Mi 9T is all set to debut in the Asian market on June 20

The post How to Unlock Bootloader on the Xiaomi Mi 9? appeared first on Gizmochina.

OnePlus is known for its affordable flagship devices carrying premium features. Similarly, OnePlus launched OnePlus 6 in 2018 with Snapdragon 845, a 6.28-inch Optic AMOLED display and a 16MP+20MP dual rear cameras. It is running on the latest Android 9.0 Pie with Oxygen OS on the top. Despite being running on the latest version, some users want to root OnePlus 6. Follow the guide to install TWRP on OnePlus 6 and root with Magisk.

OnePlus devices are always well supported by the development community. Every device from OnePlus One to OnePlus 5T have received tremendous support from third-party developers. Many ROMs, Kernels, and other MODs are available for every single OnePlus device.

After rooting, users can install custom ROMs with built-in advanced features. They can improve the performance, power efficiency, and overall productivity of the device after installing the custom ROM. We have detailed every step to install TWRP on OnePlus 6 successfully.

Note: Rooting device will void your manufacturer’s warranty. User can also brick the smartphone if steps are not followed carefully. GizmoChina.com is not liable for any damage to smartphone or data.

It will remove support for Widevine L1 Certification, limiting users to stream Netflix and other services at 480p.

Guide to Install TWRP on OnePlus 6 and Root with Magisk

Prerequisite:

• Download ADB and Fastboot Drivers on your PC/Laptop.
• Charge your device up to 70%.
• The device should be running on official firmware.
• Download TWRP Zip and TWRP Installer for OnePlus 6.
• Download Magisk Framework ZIP.

Step1: Unlock Bootloader of OnePlus 6

It is a necessary step before attaining root access on any Android smartphone. To Unlock Oneplus 6 Bootloader, follow the steps below carefully:

1. Backup important data on another device as unlocking will wipe it.
2. Enable Developer Mode by going to Settings> About Phone and, then tap “Build Number” 7 times.
3. Head over to Settings> System> Developer options, and enable “OEM Unlocking” with a toggle.
   
4. In Developer Options, also enable “Advanced Reboot”.
   
5. Now long press Power Button and tap “Reboot,” then “Bootloader”.
6. Download and install ADB and Fastboot drivers.
7. Open command prompt in the extracted ADB and Fastboot folder.
   
8. Verify device connection with the following command:

   fastboot devices

9. After successful verification, send this command to unlock the bootloader:

   fastboot oem unlock

10. Verify by highlighting the ‘Unlock the Bootloader’ option using the volume button and then selecting it with the power button.
11. Now your device is unlocked!

We suggest not to set up any security settings if you want to root OnePlus 6.

Step 2: Install TWRP on OnePlus 6

Custom Recovery like TWRP gives Android smartphone’s ability to flash custom ROMs and tweak every part of the firmware. The GUI based recovery is the most used custom recovery for Android devices. Follow the steps carefully to install TWRP on OnePlus 6.

1. Download TWRP image and Installer for your OnePlus 6 from Prerequisites menu above.
2. Extract Fastboot and ADB drivers on desktop.
3. Connect your device to PC, and transfer both the  ‘twrp-installer-enchilada-3.2.3-0.zip‘ to phone.
4. Move the ‘twrp-3.2.3-0-enchilada.img‘ file to extracted folder c:\Users\party\Desktop\platform-tools, or to the location where platform-tools are present.
5. Now Enable Developer option again and turn on the”Advanced Reboot” option.
6. Boot OnePlus 6 into bootloader mode using the power button.
7. Open command prompt in the same folder where you’ve extracted the platform-tools.
8. Once in the bootloader, type the following command to flash TWRP:

   fastboot boot twrp-3.2.3-0-enchilada.img

9. The phone will reboot to TWRP recovery mode.
10. Swipe the slider resolve warning message of ‘Unmodified system partition.’
11. Once done, Tap Install and select the ‘twrp-installer-enchilada-3.2.3-0.zip‘ from internal storage.
12. Swipe the button to install TWRP on your OnePlus 6.
13. Reboot system and enjoy!

You’ve successfully installed TWRP on OnePlus 6. Now we will proceed to root OnePlus 6 using Magisk.

Step 3: Root OnePlus 6 using Magisk 

Magisk is a popular root management app. It is the biggest competitor to SuperSu as it allows the user to grant or deny superuser privileges for every single app. It works well with apps which restrict usage if the device is rooted. Magisk can efficiently hide root status from Google’s SafetyNet. Follow the steps below to root OnePlus 6 successfully. Otherwise, you might up with a bricked device.

1. Download Magisk Installer Zip from above (Prerequisites section).
2. Connect it with the PC and move the downloaded file to internal storage.
3. Now detach the device and power it off.
4. Press Volume Down + Power button simultaneously to enter TWRP recovery mode.
5. After booting into recovery, tap the Install button and flash the ‘Magisk Installer zip‘ file from internal storage.
6. Swipe the button to flash Magisk on OnePlus 6.
7. Tap Reboot System after the process is complete.

Completing the process will bring root privileges on OnePlus 6. Magisk Installer zip also installs the companion app to control the root access. We recommend to update it before using the app. Several Magisk Modules are also available to extend the functionality of your device.

We hope our guide to install TWRP recovery and root OnePlus 6 using Magisk have helped you. Users can ask any query via the comments box below.

The post How to install TWRP on OnePlus 6 and Root with Magisk appeared first on Gizmochina.

OnePlus launched the new flagship series – OnePlus 7 and OnePlus 7 Pro earlier this month carrying high-end specifications. Both the devices are on sale in India, China, the US, and some European countries.  The device is termed as the best selling smartphone under the premium category in India and China. Amid these huge sales, developers on XDA started playing with the code to offer customizations, custom recoveries and root access on the OnePlus 7 Pro.

Before you start experimenting with the OnePlus 7 Pro, users must unlock the bootloader to install TWRP, Magisk, SuperSu and any other MOD. By default, the ability to change anything in the firmware is restricted from users. The unlocking process will allow you to flash SuperSu and Magisk to root device.

Note: Unlocking bootloader will void the device’s warranty. Users can brick their device if steps are not followed properly. In any case, GimoChina is not held responsible for any damage to the device or data. You can proceed at your own risk.

Unlocking Bootloader will lead to the seizure of Widevine L1 Certification. It is responsible for streaming premium content at higher resolutions.

Procedure to Unlock Bootloader of OnePlus 7 Pro

Prerequisite:

Backup data: It is always recommended to backup important data from your device. Bootloader Unlocking will always factory reset your device resulting in loss of data. We always advise keeping a copy of your essential data on another device.

Enable Developer Options: Users are required to enable Developer options by heading into Settings –> About phone, and then tap “Build number” field 7 times. It gives the user the ability to unlock the bootloader.

Enable Debugging Mode: It can be enabled by going to the settings -> Open developer option -> Enable USB Debugging. 

Enable OEM Unlocking: It is a step required for all the OnePlus devices. Users need to enable it by heading to System Settings > Developer options and then toggle it on. After that, press enable on the new popup window.

Install Fastboot on your Computer: Install Fastboot on your Windows/MAC/Linux from here.

Steps: Unlock OnePlus 7 Bootloader

1. Navigate to the folder where you’ve installed/extracted Fastboot drivers.
2. Open CMD or Powershell Window by pressing Shift+Right click in the same folder.
   
3. Now connect OnePlus 7 Pro to the computer with USB.
4. Type the below command to see whether the device is connected or not:

   adb devices

5. A pop-up will appear on the device requesting to allow USB Debugging, Tap OK.
6. Now reboot your phone into bootloader:

   adb reboot bootloader

7. Make sure your device is connected with the computer:

   fastboot devices

8. Type the following command and press enter:

   fastboot oem unlock

9. Now navigate to “Unlock the bootloader” option by using the volume button and select it with the power button.
10. The bootloader will be unlocked after the device reboots.

Congratulations! You have successfully unlocked the bootloader of OnePlus 7 pro.

Up Next: How to install TWRP and root OnePlus 7 Pro using Magisk?

The post How to Unlock Bootloader of OnePlus 7 Pro? appeared first on Gizmochina.