As an Amazon Associate, Gizmochina earns from qualifying purchases. Links on this page may earn us a commission at no extra cost to you.
I recently got my hands on the iPhone 18 Pro, and I’ve been enjoying my time with Apple’s latest flagship. But not everything has been as rosy as I’d hoped. I’ve encountered a few annoying issues, particularly with network connectivity, Wi-Fi, and Face ID. I’ll save those complaints for my dedicated iPhone 18 Pro review, though. Despite these hiccups, I genuinely like the phone.
About two weeks ago, I received a collection of iPhone 18 Pro accessories from ESR, including several protective cases, a silicone leather case, and a tempered glass screen protector. I’ve been switching between them since then, testing their build quality, comfort, and everyday usability.
Of course, I’m not going to deliberately throw my expensive new iPhone onto concrete to verify the advertised drop protection. So, while I’ll touch on the technical specifications, my impressions are based primarily on how these accessories perform in everyday use.
ESR Classic Hybrid Magnetic Case
The first accessories I tried were ESR’s Classic Hybrid Magnetic Cases, which I received in four finishes: Clear, Clear Black, Frosted Deep Burgundy, and Frosted Misty Blue. I’ve been using the completely transparent version most frequently, although I’ve spent time with the others as well.
The Clear and Clear Black versions have transparent backs, while the Burgundy and Misty Blue variants feature frosted finishes. All four look quite attractive, but I personally prefer the transparent version because it lets the iPhone’s original design show through.
The build quality is excellent. The cases feel sturdy without adding unnecessary bulk, thanks partly to their slim 1.5mm backs. The corners are reinforced with ESR’s Air Guard technology, with 4x military-grade protection and a rated drop resistance of up to 16 feet.
One detail I particularly appreciate is the slightly raised bumper sections near the bottom corners. These provide additional contact points when placing the phone on a surface, helping the case take the contact rather than the phone itself.
The camera area is also covered by the case, providing additional protection around the camera section while retaining the integrated metal Flex Stand.
The stand works in portrait and landscape orientations and feels sturdy enough for regular use. It protrudes slightly from the back, but that’s hardly a major inconvenience.
I’ve had some disappointing experiences with inexpensive transparent cases, including one that started yellowing within a week. ESR uses UV-resistant materials to help prevent discoloration, and after two weeks, I haven’t noticed any yellowing. That’s encouraging, although it’s too early to judge long-term durability.
The cases also feature a dedicated Camera Control button, Qi2 25W wireless charging compatibility, and magnets rated for 1,500g of holding force. During my testing, I found the magnets to be incredibly strong. Once attached, magnetic accessories stay firmly in place and require a deliberate amount of force to detach. I haven’t had any issues with accessories coming loose during everyday use.
The Clear version of the case starts at $28.99, while the Frosted Misty Blue and Frosted Deep Burgundy variants cost $30.99. For the build quality and features on offer, I think they’re pretty reasonable options.
ESR Atelier Silicone Leather Magnetic Case
Moving on to the Atelier Silicone Leather Magnetic Case, this one feels noticeably different from the transparent models.
I received the Deep Burgundy version, and it’s easily one of the most premium-looking cases I’ve tried. The silicone leather exterior has a soft, smooth texture that feels great in the hand while providing a comfortable grip.
What I particularly like is that it doesn’t stick to my jeans pockets. I’ve used leather-style cases before that make pulling the phone out of tight pockets unnecessarily frustrating. Thankfully, that hasn’t been an issue here.
The case also has a soft microfiber lining inside to protect the phone’s finish, while an oleophobic coating on the exterior helps resist stains.
In terms of protection, ESR lists 3x military-grade protection and drop resistance of up to 11 feet. There’s also a protective TPU frame around the edges.
Unlike the Classic Hybrid, which covers the camera section, the Atelier leaves the camera lenses exposed within the surrounding camera area. That’s an important design difference between the two cases, particularly if you prefer additional coverage around the cameras.
It also features an integrated metal Flex Stand, adjustable between 15 and 69 degrees. The mechanism feels solid and holds the phone comfortably while watching videos. Like the transparent cases, the camera stand protrudes slightly from the back, although I don’t consider that a significant drawback.
The dedicated Camera Control button works well, including the touch-sensitive sliding gestures for adjusting zoom. The other buttons are equally responsive.
Just like the transparent cases, ESR has included magnets rated for 1,400g of holding strength, and they’re seriously powerful. During my testing, magnetic accessories stayed firmly attached to the case, and I had to apply a fair amount of force to pull them off. The connection feels extremely secure, and I haven’t experienced any issues with accessories accidentally detaching.
The Deep Burgundy Atelier case costs $38.99, compared with its regular price of $42.99. It’s more expensive than the Classic Hybrid, but if you prefer a softer, more premium finish, the additional cost makes sense.
ESR UltraFit Armorite Pro Screen Protector
The UltraFit Armorite Pro Screen Protector was probably the accessory that made the most immediately noticeable difference to my experience.
When I first purchased the iPhone 18 Pro, I installed a local market tempered glass protector. Unfortunately, it wasn’t particularly good. The display collected fingerprints and smudges easily, touch responsiveness felt noticeably worse, and I also encountered some Face ID-related frustrations.
After switching to ESR’s Armorite Pro, the improvement in how the display felt was immediate.
The package includes three tempered glass protectors, an UltraFit installation tray, and cleaning accessories.
Installation is ridiculously simple. You first clean the display using the included cleaning kit, which comes with wet and dry wipes. Then, you place the screen protector into the installation tray, position your iPhone inside, close the tray, and pull the attached ribbon. The mechanism automatically applies the tempered glass to the display.
You just need to wait around five to six seconds for the protector to adhere evenly before removing the phone from the tray. That’s pretty much it. No complicated manual alignment or frustrating attempts to position the glass perfectly.
I found the process extremely straightforward, and I genuinely think even someone installing a screen protector for the first time could manage it without much trouble.
Once installed, the glass feels remarkably close to the original display. My fingers glide smoothly across the surface, touch responsiveness feels natural, and fingerprints and smudges are far less noticeable than with my previous protector.
Display clarity is equally impressive. I haven’t noticed any difference in colors, sharpness, or visibility compared with the original screen. It essentially feels like using the iPhone’s display without an additional layer of glass.
The protector uses reinforced Corning glass, with rated impact absorption up to 10x better, scratch performance up to 2x better, and up to 25% fewer visible scratches. There’s also an anti-reflective coating to reduce glare and an oleophobic coating to resist fingerprints.
I haven’t independently verified those durability figures, so I can’t say how well it would survive a serious impact. But the everyday experience has been excellent, particularly compared with the local market protector I was using previously.
The three-pack costs $32.99, down from $35.99. It’s a reasonable investment, especially since you’re getting three screen protectors in one package.
ESR Cyclone 25W Magnetic Charging Pad with CryoBoost
Next up is the ESR Cyclone 25W Magnetic Charging Pad with CryoBoost, which is easily one of the more interesting wireless chargers I’ve tested recently. I received the Deep Burgundy version, and the build quality is absolutely fantastic.
It feels premium, has a reassuring amount of weight, and features a sturdy metal stand that can be adjusted from 0 to 150 degrees. You can position your iPhone in portrait or landscape orientation, making it convenient for watching videos or using StandBy mode while charging.
The charger supports Qi2-certified 25W wireless charging, and during my testing with the iPhone 18 Pro, I saw power readings peak at around 31W. That’s the input power reading rather than necessarily the power delivered wirelessly to the phone. The charging speeds have been quite impressive, with the iPhone taking roughly 25-35 minutes to go from 0% to 50%.
What impressed me the most, however, was the CryoBoost active cooling system. I’ve used several magnetic wireless chargers before, and some of them caused my iPhone to overheat, temporarily stopping the charging process until the device cooled down. Thankfully, I haven’t experienced anything like that with the Cyclone. Using an infrared thermometer gun, I recorded surface temperatures of around 33°C. Of course, this can vary depending on the surrounding temperature.
The cooling fan is also incredibly quiet. Even when sleeping beside the charger, I could barely hear it. You would practically have to bring your ear close to notice the sound. The included 5.9-foot cable feels good quality, too.
The magnets are incredibly strong and hold my iPhone 18 Pro firmly in place, even when I adjust the stand or use the phone while it’s charging.
The Deep Burgundy version is currently priced at $49.99, down from $56.99. It’s certainly not the cheapest magnetic charger, but considering the premium construction, adjustable stand, fast charging, and excellent cooling performance, I think it’s a worthwhile option.
ESR Xtend 45W Retractable Charger
The final accessory I’ve been testing is the ESR Xtend 45W Retractable Charger, also in Deep Burgundy. This one immediately caught my attention because of its compact design and built-in retractable USB-C cable. The burgundy finish looks absolutely gorgeous, while the rounded body, premium construction, and foldable plug make it particularly convenient for travel.
It features a 3.1-foot braided USB-C cable that retracts directly into the charger. The cable feels sturdy and is long enough to comfortably use my iPhone while charging. ESR rates the mechanism for over 20,000 pull-and-retract cycles and the cable for over 10,000 bends, which sounds promising for long-term durability.
Under the hood, the charger uses GaN technology and supports PD 3.2 AVS and PPS, with 45W rated charging and advertised dynamic power adjustment up to 60W. During my testing with the iPhone 18 Pro, I recorded charging power reaching 45W, and the phone went from 0 to 50% in approximately 15 minutes.
It also features a secondary USB-C port, which allows charging two devices simultaneously. The charger did get mildly warm during use, but it never became uncomfortably hot, even when charging two devices together.
The Xtend 45W Retractable Charger is priced at $47.99, down from $53.99.
Final Thoughts
If you’re thinking about kitting out your iPhone 18 Pro, ESR’s stuff feels like the kind you won’t regret picking up. The cases feel sturdy without being bulky, the tempered glass feels genuinely tough, and the chargers don’t come across as flimsy or gimmicky. Nothing here feels cheap or rushed.
Even if you’re not planning to buy everything, it’s worth checking out. Especially if you care about long-term protection and solid day-to-day usability rather than flashy claims. It’s not the cheapest route, but the overall quality makes it feel like money sensibly spent.
FREE DAILY NEWSLETTER
Joel Explains
What matters in phones and gadgets, before it reaches you. From Gizmochina’s editor-in-chief, every morning.
Join 1,500+ readers. One email a day, unsubscribe in one click.































Comments