In the last few months, there have been numerous rumors and reports regarding the upcoming Huawei P50 series of smartphones. Now, a tipster has leaked what is apparently the official renders of the flagship handset.

The leak arrives from @Rodent950 on Twitter that shared images revealing the rear panel of the device. Looking at this image, the most striking aspect is the unique camera module on the back that comprises of two large rings. These dual rings contain a total of four cameras, which includes one large 1 inch sensor that is likely the primary lens of the handset. Furthermore, the tipster claims that these images are not mockups but are the official renders from the Chinese tech giant.

The two ring modules are stacked vertically, with the top ring housing three image sensors and just a single sensor on the lower ring. Notably, the lone sensor on the bottom is visibly the largest and is expected to be the primary lens. These rings had been seen in previous reorts but the layout of the sensors beneath these rings were not visible back then. It is being specualted that the device will also sport a periscope lens, although, it is not observable in the renders we see here.

But, this might just be the base model within the series and the higher end variants might feature the zoom lens. Talking about other specs of the device, the Huawei P50 is expected to feature a 6.3 inch display with a centered punch hole selfie shooter while the rear is reportedly the Sony’s 1 inch IMX 800 sensor. The smartphone is expeced to launch in the arriving weeks, so stay tuned for more updates.

RELATED:

• HUAWEI Qingyun L410 is the company’s first ARM laptop featuring a Kirin 990 SoC
• Xiaomi and Oppo see strong growth in Western Europe in Q1 2021, while Huawei faces decline
• Huawei to announce new products on its May 19 launch conference

The post Huawei P50 series official renders have allegedly been leaked appeared first on Gizmochina.

Yesterday, Steve Hemmerstoffer(@Onleaks) revealed the Huawei P50 Pro CAD renders. Today he is back with the renders and specs of the vanilla Huawei P50.

Right off the bat, we see that the renders show a similar pill-shaped camera layout with a bump and two huge cutouts inside. However, the device has a flat display and not a curved one like the Huawei P50 Pro.

Huawei P50 Design and Specs(Expected) 

Just like the Pro, the Huawei P50 is said to come with a rear glass panel and a metallic frame. The device will likely measure 156.7 x 74 x 8.3mm. If you are wondering the thickness is fairly less, it bumps up to 10.6mm on including the rear camera layout which is a whopping 2.3mm increase in thickness.

If Steve’s render is accurate, the non-Pro variant will also a 0.3mm more thickness(with camera bump) than the Huawei P50 Pro. That said, the silver color variant shown in the renders has Type-C, speakers, antenna lines at the bottom, another speaker & IR blaster at the top, volume & power buttons to the right.

1 of 3

As for specs, steve says that the Huawei P50 will come with a 6.3-inch flat display with a punch-hole at the center. The display has bezels slightly bigger than the ‘Pro’ variant. Although we are yet to know the number of sensors inside the camera layout, Huawei is expected to include an industry-first 1-inch Sony IMX800 sensor.

If reports are to be believed, the Huawei P50 series will feature the same Kirin 9000 flagship chipset. Other expected specs include a in-display fingerprint scanner, run HarmonyOS out of the box. Let’s wait for more leaks as the speculated April 17 launch gets closer.

RELATED:

• Huawei MatePad 10.4 to launch in Malaysia on March 20 with refreshed specs
• HUAWEI FreeBuds 4i launched in the UK, pre-orders include a free HUAWEI Band 4
• Huawei to unveil its flagship 5G tablet alongside the P50 series next month

The post Huawei P50 renders show a flat display and same camera layout as the P50 Pro appeared first on Gizmochina.