Advertisement

The Moto G7 series may launch earlier than usual going by the number of leaks in the past few weeks. Today brings yet another leak and it is a set of press renders for the whole lineup.

The Moto G7 series will include the Moto G7 itself, the Moto G7 Plus, the Moto G7 Play, and the Moto G7 Power. These press renders show all four phones in various colors and also reveal other details about their design and specs.

Moto g7 official render

Moto G7

The Moto G7 is shown in white. The back is curved and like its predecessor, it is covered in glass. The biggest change in terms of design is the switch to a notched display and in this case, the water-drop style. There is still a bit of bezel at the bottom that is thick enough to accommodate the manufacturer’s name. Housed within the notch is a single camera.

There is also a change in the rear camera design. It retains the circular housing that isn’t flushed with the rest of the back but the change is in the design of the sensors’ housing. Both cameras share a single housing instead of separate ones like the Moto G6. The area around the cameras is coated black and there is a LED flash underneath.

The Motorola batwing logo which doubles as a fingerprint scanner sits below the cameras. The render also shows us that the bottom of the phone is home to a 3.5mm audio jack, a USB type-c port, and a speaker grille.

Moto g7 Plus official render

Moto G7 Plus

The Moto G7 Plus wears a wine-colored coat and has the same curved glass back as the Moto G7. It also has a notched display design though reports say the screen is bigger in size. The back is also the same design as that of the Moto G7. It also has dual rear cameras and a fingerprint scanner under the batwing logo.

The Moto G7 Plus will differ from the Moto G7 in terms of specs and size as is the tradition with the series.

Moto g7 Play official render

Moto G7 Play

The Moto G7 Play picks up the popular Champagne Gold hue.  It has a wide rectangular notch at the top that is home to a camera, a speaker, and an LED flash. It also has a thicker bottom and side bezels compared to the Moto G7 and Moto G7 Plus.

The back of the phone seems like metal but we won’t be surprised if it is plastic although a switch to metal will be appreciated. The camera house has been slightly redesigned but it still has just a single sensor and an LED flash. It also has a fingerprint scanner.

There is a port at the bottom which is likely MicroUSB. There is no audio jack visible at the bottom but we are pretty sure it is at the top just like its predecessor’s.

Moto g7 Power official render

 

Moto G7 Power

The Moto G7 is getting a Power-variant this year and the name should already tell you that the selling point of the phone will be its large battery capacity.

The Moto G7 Power has a smaller notch that just houses the front-facing camera and speaker. Its bezels are also thick like that of the Play variant. It also has a similar rear design and appears to be made from the same material – polycarbonate. Its deep blue finish looks good and should be a favorite among those who purchase a unit. There is also a MicroUSB port at the bottom and very likely, a 3.5mm audio jack at the top.

READ MORE: Latest Moto Camera update brings new features to all Motorola phones

The Moto G7 series will launch next year but the release date remains under wraps. Motorola is expected to launch all phones with Android 9 Pie out of the box.

(Source, Via)

Comments