Recently, reliable tipster @OnLeaks had shared the CAD renders of the vanilla Samsung Galaxy Tab S7. Now, the tipster has revealed the CAD renders of the advanced Galaxy Tab S7+.
As can be seen in the CAD renders of the Galaxy Tab S7+, its design is identical to the Galaxy Tab S7 tablet. The Plus edition measures 285 x 185 x 5.7mm. The thickness of the device increases to 6.9mm with the camera bump. A front camera can be seen on the side bezel of the Tab S7+.
It is expected to feature a 12.4-inch display with slim bezels around it. The device is rumored to house a 9,800mAh battery. The backside of the device features a dual camera setup along with an LED flash.
The left edge of the Tab S7+ features a SIM slot, a volume rocker, a power key and a noise cancellation mic. The USB-C port placed between speaker grilles can be seen at the bottom side of the device.
Editor’s Pick: Samsung may not supply Huawei with chips for its smartphones
In comparison, the Galaxy Tab S7 has 253.7 x 165.3 x 6.3 dimensions. It measures 7.7mm in thickness at the camera bump. It is likely to feature an 11-inch display and it may house a 7,670mAh battery. The Tab S7 also features an LED flash assisted dual-camera system.
The Snapdragon 865 mobile platform along with 6 GB of RAM is expected to power the Galaxy Tab S7 and Galaxy Tab S7+ tablets. Both tablets will come with support for the 120Hz refresh rate and S Pen stylus.
UP NEXT: Xiaomi and Samsung accused of favoring online retailers by India’s offline sellers
(source)
