Oppo‘s upcoming Find X10 series has cleared a key regulatory step in China. A new Oppo phone bearing the model number PMW110 has appeared in SRRC certification, and popular tipster Digital Chat Station believes this device belongs to the Find X10 lineup. The listing confirms the phone supports the N79 5G band.

This certification arrives after months of leaks about the Find X10 family. Earlier reports have tipped the series to include up to four models with screen sizes ranging from 6.32 inches to 6.89 inches, all featuring narrower LIPO bezel technology.

The tipster also touched on rumored specs in the new post, suggesting a 2nm Dimensity 9600 Pro chip, a flat screen, and a 200MP HPC camera setup. As for launch timing, DCS says Oppo internally hopes for a release in late September.

Oppo Find X10 series leak

A user in the comments also asked if the phone won’t use a Tianma screen. DCS pushed back and defended the panel maker, asking what’s wrong with Tianma OLED. Oppo has reportedly been testing a 6.78-inch 1.5K LTPO display built on a new-generation Tianma substrate for the Pro model, so this comment isn’t a huge surprise.

On the camera front, previous reports have pointed to a 200MP 1/1.3-inch ultra-large sensor main camera on this phone, paired with a 200MP large-sensor telephoto lens and a 3MP multispectral lens. Oppo’s rumored Find X10 Pro Max camera setup has followed a similar pattern, with a 200MP HPC primary sensor and a periscope telephoto camera. Oppo is also said to use an 8,000mAh cell for the standard model.

Oppo is also expected to split chipsets across the lineup, giving the standard model a Dimensity 9500 Plus chip while Pro variants move to the 2nm Dimensity 9600 series, which lines up with what DCS suggests here.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 

(Source)

The post Oppo Find X10 clears key regulatory hurdle, launch expected in September appeared first on Gizmochina.

Just a couple of days after news broke of OnePlus leaving the US and Europe, a new report says it’s not only the West — the Chinese smartphone maker is exiting from India too. 

According to a new report from Bloomberg, OnePlus’s pullback from the West isn’t a one-off regional decision but the first phase of a much wider global retreat. Sources familiar with the matter told Bloomberg that Oppo is planning to eventually shut down OnePlus operations across most of the world, including in India, sometime in 2027. China is said to be the only market where the OnePlus brand will keep running as usual.

OnePlus to cease India and global business in 2027

It’s unexpected news since previous reports were heavy on OnePlus’s exit from the US and European markets, thus leading us to speculate India might stay unaffected. Now it looks like India will simply see its exit happen a bit later.

The reasoning behind the move reportedly comes down to money. Oppo’s phone business has been under pressure lately because of weak momentum across the US, Europe, and India alike, on top of rising geopolitical friction tied to selling Chinese-made phones in the US. Sister brand Realme is said to be exiting China entirely as part of the same shake-up. Meanwhile, Oppo will focus its business on Central Europe and the Nordic region since it has had some luck there.

None of this comes entirely out of nowhere. OnePlus has already been trimming its footprint in India for months — shutting down most of its partner-run offline stores, going online-first, and merging its after-sales network with Oppo’s. 

It’s also expected to lose its distinct OxygenOS software identity in favor of Oppo’s ColorOS. Add a slowing India, US, and Europe market for OnePlus, and a 2027 exit starts to look less like a surprise and more like the next domino to fall.

OnePlus and Oppo have not commented on the report yet. We will keep following this story as it develops.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source)

The post Not only the US, but OnePlus is exiting India too appeared first on Gizmochina.

The Redmi K100 Pro just cannot stay out of the leaks. We reported earlier that tipster Digital Chat Station (DCS) had shared a fairly complete spec sheet for the phone — from its display to the camera setup. Now, the same tipster is back with a fresh post that mostly confirms those details, while adding a few new points worth knowing.

Redmi K100 Pro Specifications (Expected)

According to the new leak, the Redmi K100 Pro is a prototype belonging to the larger-screen variant of the series. It is said to come with a flat display that supports an ultra-high 185Hz refresh rate, along with what DCS describes as “ultra-high resolution” display technology. Going by past reports, this is expected to be a 6.59-inch or 6.9-inch OLED panel.

Under the hood, the phone is tipped to run on the Snapdragon 8 Elite Gen 5 chip, paired with a separate graphics chip for smoother gaming performance. This dual-chip setup has been a recurring theme in earlier Redmi K-series leaks as well.

On the camera front, nothing has changed much from before. The Redmi K100 Pro is still expected to feature a 200-megapixel main camera with a large sensor, along with a 50-megapixel telephoto lens that also supports macro shots.

Fueling everything will be an 8,500mAh-class battery, 100W wired charging, and wireless charging support. Other features mentioned include symmetrical dual speakers, a 3D ultrasonic in-display fingerprint sensor, and IP68/IP69-rated dust and water resistance.

The Redmi K100 series is expected to debut in China as early as September or October 2026, with a global variant likely arriving later under a different name. We will keep you in the loop for any new updates. 

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 

(Source)

The post Fresh Redmi K100 Pro leak reiterates specs, 200MP camera, 8500mAh battery appeared first on Gizmochina.

As scheduled, Realme has officially launched the Narzo 100x 5G in India. The device comes with an 8,000mAh battery and a 144Hz display; the final specs match up closely with what was expected.

Realme Narzo 100x 5G Specifications

The highlight of the phone is its massive 8,000mAh battery, which Realme calls a “Titan Battery.” The company claims it can last up to three days on a single charge and still retain over 80% battery health after four years of use, supporting up to 1,600 charge cycles. 

Charging is handled by a 45W fast charger, along with 27W reverse wired charging and bypass charging for cooler gaming sessions. Despite the large battery, the phone stays fairly slim at 8.8mm thick and weighs 224 grams.

On the display side, the Narzo 100x 5G gets a 6.8-inch HD+ LCD screen with a 144Hz refresh rate and 1,200 nits of peak brightness. For such smoothness and outdoor visibility, the HD+ resolution is a bummer.

Under the hood, it runs on the MediaTek Dimensity 6300 chipset, paired with LPDDR4X RAM and UFS 2.2 storage. A 5,300mm² vapour chamber cooling system is included to manage heat during gaming or heavy use.

For cameras, the phone has a 50MP main rear camera and an 8MP front camera for selfies and video calls. It runs Android 16 with Realme UI 7.0 on top, and includes an AI Pulse Light on the back for notifications, along with IP65 dust and water resistance. Connectivity options include Wi-Fi 5 and Bluetooth 5.3.

The Realme Narzo 100x 5G is priced at Rs. 20,999 for the 4GB RAM + 128GB storage variant. The 6GB + 128GB and 6GB + 256GB RAM and storage versions are priced at Rs. 22,999 and Rs. 24,999, respectively. It is available in Midnight Black and Flash Orange colours.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

The post Realme Narzo 100x 5G Launched in India with 8,000mAh Battery and 144Hz Display appeared first on Gizmochina.

Xiaomi has announced its first power bank built to meet China’s new national safety standard for portable chargers. Dubbed the Xiaomi Power Bank 20000 22.5W, it will go on sale in China on July 22 for 149 yuan (~ $22).

The power bank has a 20,000mAh capacity and supports 22.5W charging through a built-in cable. Inside, it uses two 10,000mAh battery cells rather than a single large cell. Xiaomi says the product has cleared a demanding set of safety tests, including a 4mm needle penetration test, a 135 °C heat exposure test, an overcharge test at 1.3 times the normal voltage, a compression test using roughly 1.3 tons of force, and a 300-cycle aging test that checks for lithium plating.

The device also includes smart management features tied to its cable, so that users can check battery health and access traceability information about the battery inside. As for connectivity, you get one USB-A and two USB-C ports. 

The new model is based on the Xiaomi 20000 22.5W Power Bank 2026, which it launched in June. It also has a built-in cable, uses a 2C+1A port layout, and sells for the same 149 yuan.

What is the new national standard?

China introduced a mandatory national standard for power bank safety in April; however, it doesn’t take effect until April 1, 2027. The rules require stronger protection against high heat, overcharging, and crushing, and add a new test for lithium buildup after repeated charging cycles to lower the chance of short circuits in older batteries. Power banks must also be able to store and share data about unusual events, and each unit needs its own identification code so consumers can check details like the battery brand.

The standard was shaped with input from several major manufacturers, including Huawei, Xiaomi, Oppo, and Anker, and is regarded as one of the strictest in the world. It brings in extra mechanical tests such as drops, crushing, and impacts, bans the use of recycled or refurbished lithium cells, and sets tougher rules for the chemical fluid inside batteries. Manufacturers have a transition period before the rules become mandatory, but Xiaomi’s new launch shows companies are already moving to meet the tougher requirements ahead of schedule.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

The post Xiaomi launches its first powerbank under China’s new national safety standard appeared first on Gizmochina.

Google‘s next smartwatch has stayed mostly out of the spotlight compared to the heavily leaked Pixel 11 series, but that’s starting to change. After earlier reports hinted at the Pixel Watch 5’s pricing and color lineup, fresh press-style renders are now giving us our first look at the upcoming wearable ahead of its rumored August 12 unveiling.

The renders come from tipster OnLeaks, working alongside The Tide Chart, and show the Pixel Watch 5 in four different case finishes across two case sizes.

Google Pixel Watch 5 renders confirm familiar design

Based on the images, it’s safe to say Google isn’t changing the design language this generation. The Watch 5 looks similar to last year’s Pixel Watch 4, with the same curved, domed-glass display, the charging pins on the side of the case, and Google’s proprietary band-attachment system rather than standard lugs.

The watch is tipped to come in two case sizes, 41mm and 45mm, each available with either Wi-Fi-only or LTE connectivity.

Color options differ slightly between the two sizes. The smaller 41mm model is expected to come in four finishes: Dark Anthracite, Natural Silver, Pyrite, and Warm Gold. The larger 45mm version, however, reportedly skips the Warm Gold option, leaving buyers with three finishes to choose from instead.

Beyond the design, rumors suggest the Pixel Watch 5 will ship with Wear OS 7 out of the box, alongside modestly larger batteries than the previous generation for improved battery life. On the pricing side, earlier leaks suggest the new watch could cost about $50 more than the Pixel Watch 4 did at launch.

With the renders now out, we can also expect more technical details to come out soon. Stay tuned for more as the launch date approaches.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source)

The post Pixel Watch 5 leaked renders reveal design, colors, and size ahead of August launch appeared first on Gizmochina.

Just days after leaked images gave us our first look at the upcoming Insta360 X6, a fresh report has now revealed full specifications of the handheld camera. According to details shared by WinFuture, the X6 will be smaller than the X5 but comes with several hardware upgrades.

Insta360 X6 Specifications

Starting with the camera itself, the X6 is said to feature two 1/1.1-inch image sensors, each rated at 42MP. Combined, they produce 360-degree photos of up to 120MP. The camera also supports 10-bit color in 360 mode, along with Dolby Vision and I-Log color profiles. It also gets an updated Adaptive Tone 2.0 feature for better exposure in difficult lighting.

As for videos, the camera can record 360-degree films at up to 8K resolution and 50 frames per second. What’s notable about this frame rate is that it allows footage to be played back at half speed for smooth slow-motion clips, which should be a big win for action and sports creators. 

In its PureVideo 360 mode, the camera can also shoot 8K at 30fps, while switching to single-lens mode unlocks 5K video at 60fps or 4K video at a very high 120fps. Insta360 is also promising 11K timelapse recording in full 360-degree mode.

For digital controls, the camera has an OLED touchscreen with a brightness of up to 1200 nits. Compared to the predecessor, the X6 has a bigger 2600mAh battery that is said to offer up to 233 minutes of recording.

The body measures about 10cm in length, 5cm in width, and under 4cm in thickness, and weighs around 195 grams. As we mentioned in our previous report, pricing is expected to go up. The base model is likely to cost around €700 in Europe, while the Essentials bundle may cost close to €800.

Insta360 has not confirmed an official launch date. More details are expected soon.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

The post Insta360 X6 specs leaks, 8K 360° video, 120MP photos and a bigger battery expected appeared first on Gizmochina.

Xiaomi has expanded its children’s wearable lineup with the launch of the Redmi Kids Watch Pro in China. The device carries an official price of 1,199 yuan (~ $175), though early buyers can grab it for 1,045 yuan during the first sales batch. It is available for purchase on JD.com.

The Redmi Kids Phone Watch Pro has an octagonal screen with a camera mounted on the top bezel. What’s interesting here is that the watch has a flip-up housing with a camera even on the back. Both are 5MP sensors, and kids can use the cameras for both selfie and outward-facing shots. 

The health tracking feature covers heart rate and blood oxygen alongside 18 sport modes and 5 fitness assessments. A water-proximity alert notifies parents automatically if the child gets close to a lake, pool, or river.

Redmi Kids Watch Pro offers offline tracking

One of the thoughtful additions is the watch’s ability to keep tracking a child’s whereabouts even when it’s completely powered down. Thanks to a dual-core setup and Xiaomi’s Find My network of connected devices, the watch can keep sharing location data for roughly five days after shutting off by relying on nearby Xiaomi hardware to relay the signal.

Moreover, Xiaomi’s third-generation AI floor-positioning system can pinpoint not just the building a child is in but the exact floor. It updates the location every second so parents get a near-live view through the companion app. The watch also recognizes subway stations, can log a child’s commute and save the route for parents to check later.

Socially, the watch lets kids befriend others by tapping devices together — including watches from rival brands — and supports child-safe versions of WeChat and QQ for calls and messaging. Parents get access to a full dashboard of wear time, app usage, activity, and behavior, plus the ability to set screen-time limits and auto-disable the watch during school hours.

The launch follows Xiaomi’s Kids Watch with an AMOLED display and floor-level GPS in January.

The post Redmi launches new kids smartwatch with offline tracking and dual flip camera appeared first on Gizmochina.

Google Pixel 11 series is a little over a month away from its reveal, but a premature Amazon listing has revealed the three phones — Pixel 11, Pixel 11 Pro, and Pixel 11 Pro Fold — in most of their color options.

First spotted by 9to5Google, the listing shows the base Pixel 11 in three different shades. The listing titles used playful names like “Hibiscus” and “Pistachio,” though the actual product descriptions referred to them as “Fuchsia” and “Moss.” A third color, listed simply as “Midnight,” rounds out the trio. 

As for the Pixel 11 Pro, it is listed in Dune and Sterling finishes. The Pixel 11 Pro Fold, meanwhile, comes in Pine and Midnight options.

The listings are tied to the “Google Store” seller account on Amazon, which adds some weight to their credibility, though it’s worth noting Amazon’s marketplace is also full of third-party sellers, so a degree of caution is warranted. 

Google Pixel 11 Series Specifications

A few small specs slipped through in the descriptions too: the base Pixel 11 is listed with a 6.3-inch display at 1080 x 2424 resolution, 12GB of RAM, a 4,985 mAh battery, and a starting price of $899 for the 256GB model. 

Not everything in the listings checks out, though. The pages reference Android 16 as the software on board, despite the fact that these phones are expected to ship with Android 17. There are also mentions of a Google Pixel Tag as a compatible accessory for Pixel 11 phones, but no such thing exists as of now. 

Given the inconsistencies, it’s best to treat these color reveals as likely, but not fully confirmed. Google has already scheduled its Pixel 11 launch event for August, so official confirmation isn’t far off.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

The post Google Pixel 11 colors leaked via Amazon listings, ahead of August launch appeared first on Gizmochina.

OnePlus‘ future in Europe and the US may be coming to an end if a new report is to be believed.

According to German publication WinFuture, OnePlus and its parent company, Oppo, are preparing to announce major “changes in strategy this week.” The report claims the move will see OnePlus exit the European and US smartphone markets, while Oppo will expand its presence to fill the gap, particularly across Europe.

The rumor follows a turbulent year for OnePlus. In January, speculation that the company was shutting down spread quickly online before OnePlus publicly denied the claims. Since then, multiple reports have suggested the brand could still scale back its global ambitions, including a recent rumor that future global OnePlus phones may ship with Oppo’s ColorOS instead of the company’s own OxygenOS branding.

OnePlus is already preparing for exit in Europe

There are already signs that OnePlus has been pulling back in parts of Europe. In Germany, for example, the company’s online store now lists only the OnePlus 15R as the available model. Even its latest flagship, the OnePlus 15, and the Nord lineup are no longer available. According to WinFuture, customers in Italy, Spain, France, Austria, Belgium, the Netherlands, the Czech Republic, Denmark, Sweden, and Norway are seeing similar changes.

If the report proves accurate, it would mark one of the biggest shakeups for BBK Electronics’ smartphone brands outside China. OnePlus built its reputation by offering flagship-level hardware at lower prices before expanding into premium smartphones, tablets, wearables, and audio products. A withdrawal from two of its largest Western markets would be a dramatic change in direction.

Neither OnePlus nor Oppo has officially confirmed the reported plans. If an announcement is indeed scheduled for this week, we may not have to wait long to find out whether the rumors are true.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source 1, 2)

The post OnePlus to exit the US and European market, official announcement this week, claims new leak appeared first on Gizmochina.

Most of the AI features we have on our smartphones today are good until we remember them. A translation tool buried three menus deep. A photo editor that only works if you open the right app first. A chatbot that answers questions but can’t actually do anything for you. It’s AI as a favor you have to ask for, one small task at a time.

A Chinese AI company, StepFun, founded by former Microsoft employees in 2023, thinks this is the wrong way to build a phone. Its answer is the StepX Neo — the world’s first mass-market agentic smartphone, with a built-in AI agent that handles multi-step, end-to-end tasks on its own. No repeated prompts or separate app openings required.

What makes the StepX Neo different from regular AI phones

At the core of the StepX Neo is the company’s own agent called Step Amoo, baked directly into the phone’s custom agent operating system, Step AOS. Amoo is the bot that you talk to like a normal chatbot and it works fully offline for all core tasks, and requires no constant network connectivity. 

The agentic nature of the OS means it can take a single natural language request from a user and string together tasks across apps, web tools, and your device’s built-in tools to deliver full, finished results. It learns your preferences over time too, so it will automatically prioritize pet-friendly flights if that’s what you’ve booked before, or pick your go-to restaurant for reservations whenever you need it.

If you’re traveling abroad, the Neo can also translate live in-person conversations, text messages, phone calls, and even text on street signs, restaurant menus, or museum posters in 32 supported languages (including regional dialects). 

It can also pull up local transit schedules, find nearby events, or access your saved trip itinerary even if you’re in a remote area with no cell signal. For frequent travelers, the agent can automatically fill out customs forms, flag visa requirements for your destination, and send you reminders for check-in times based on your flight details.

Step AOS and the Agent native route

The Step AOS is StepFun’s own agentic operating system built with what the company calls an atomic capability engine. The engine splits the phone’s functions into four groups — communication, apps, files, and system tools — using the MCP standard, so the agent can freely combine them to get a task done; this layer was rebuilt from pieces of Android, Linux, and RTOS rather than bolted onto Android as an app, says StepFun.

Step AOS also has a voice-and-vision input layer called NUI, which learns your habits as you use the phone, which StepFun frames as a shift from “humans operating a device” to “simply stating what you want done.”

To make that agent trustworthy, the company further built three supporting systems:

• Memory: A two-domain memory setup that separates what belongs to the user from what belongs to the agent and moves through a capture-understand-retain pipeline.
• Decision-making: A tiered decision layer that routes easy requests to small, fast models and harder ones to heavier models as needed.
• Security: A security framework built on trusted execution, full audit trails, permissions granted only when needed and revoked right after, and one-tap undo for mistakes.

Powering all of this on-device is Step Edge, a foundation model StepFun built specifically to run within a phone’s compute limits, which the company says leads comparable edge models across 29 benchmarks, though it hasn’t said which benchmarks those are.

Step Edge is part of a broader “1+N” model lineup StepFun has been developing since it entered the foundation-model race in April 2023, and the Neo is the point where that model work, the edge AI, and the hardware finally converge into one shipping product. 

None of it matters without something to plug into, though, which is why StepFun lined up integrations with Ctrip, Alipay, Didi, Meituan, WPS, and CapCut spanning travel, payments, ride-hailing, local services, office work, and content creation. This will be the real test of whether an “agent-native” phone can actually book a ride or edit a video end-to-end, rather than just promising it can. We can’t wait to see the live demo.

There’s no word yet on when or how much the StepX will retail for.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source)

The post Chinese AI company launches world’s first agentic smartphone appeared first on Gizmochina.

There are a lot of reasons to want a portable projector instead of just streaming on your laptop or phone: you want a movie-night image that’s actually big, you’re traveling and don’t want to lug a TV, or you just want to point something at a blank wall and have it turn into a screen in under a minute. 

We go back through this category every few months, and this stretch of July is an especially interesting time to buy. XGIMI has new hardware landing in the next few days, JMGO has recently expanded its lineup with a new 4K portable projector, and several models that were heavily discounted earlier this month have returned to their regular prices. If you’re shopping now, it’s worth focusing on long-term value rather than temporary sales.

But before buying, you should know a few basics about the projector. They have a few types: LED models are the cheapest and most common, laser models are brighter and more color-accurate but cost more, and a growing number now blend the two. Battery life, auto-keystone, and whether Google TV or Netflix is built in without a dongle matter just as much as brightness once you’re actually using one of these day-to-day. With that in mind, here’s what’s actually worth your attention this month.

XGIMI Elfin Flip 4K

XGIMI is announcing the Elfin Flip 4K on July 15th, and it’s the most ambitious projector from the brand yet.  

It’s XGIMI’s first small laser projector with native 4K support. It runs on a new RGB tri-color laser engine that XGIMI says offers color accuracy with ΔE of under 1. For those unaware, the value is closer to reference-monitor territory than portable projectors usually bother with. Color coverage is rated at 110% of BT.2020.

The body carries over the same 150-degree adjustable stand-and-handle design the Elfin Flip line has used since its debut. If that name rings a bell, we’ve previously covered the original Elfin Flip’s debut back at IFA 2024, when it launched at $399 with 400 ISO lumens and nothing close to a laser engine. Two years later, the same shell is carrying a 4K chip, which says a lot about how fast this category is moving.

It also runs Google TV out of the box, so there’s no separate streaming stick to carry, and it supports ALLM and VRR for your gaming needs.

The projector is currently on pre-order till July 14th, and if you do, you can claim 10% off for paying in full, plus a free portable screen or a set of 3D glasses depending on the model.

XGIMI Elfin Flip Laser

The Elfin Flip Laser launches the same day as its 4K sibling but sticks to 1080p — and it’s trading resolution for a claimed 1,600 ISO lumens. Everything else is the same: same stand, same Google TV software, same ALLM and VRR support if you want to plug in a Switch or a Steam Deck for something less serious than a movie. 

If the brightness number holds up, this is the one we’d point most people toward, since 1080p at this size rarely looks meaningfully worse than 4K unless you’re sitting close enough to count pixels.

JMGO N3 Ultimate

JMGO isn’t a household name in the way XGIMI or Nebula is, but the Chinese projector maker has quietly built a reputation for high-end laser projectors over the past few years.

While the company first gained traction in Asia, its recent global expansion has put models like the N1S Ultra and the new N3 Ultimate in front of a much wider audience.

The N3 Ultimate is the company’s new flagship projector with a 4K DLP projection system and JMGO’s latest MALC 5.0 RGB triple-laser light engine. It delivers up to 5,800 ISO lumens, covers 110% of the BT.2020 color space, and supports both Dolby Vision and HDR10+ standards. 

Instead of relying entirely on digital keystone correction, JMGO offers motorized optical zoom, motorized lens shift, and a two-axis AI-powered gimbal that makes setup easier without sacrificing image quality. It runs Google TV out of the box, supports VRR for gaming, and can accept signals up to 1080p at 240Hz.

XGIMI Vibe One

The XGIMI Vibe One, which usually retails for $250, is currently available for $219, making it a great deal for the price.

It’s a simple, battery-powered 1080p projector with Google TV built in, and at that price it’s hard to find anything else in the category with a proper smart TV platform baked in rather than a streaming stick taped to the side. At $219, it’s hard to find anything else in the category with Google TV actually built in

Anker Soundcore Nebula Mars 3 Air

The new XGIMI models are appealing, but the Nebula Mars 3 Air from Anker is a safe choice if the latest hardware is not what you crave. It is one of the easiest portable projectors to recommend thanks to its balance of image quality, battery life, and genuinely useful smart features.

The Mars 3 Air uses a native 1080p DLP projection system with 400 ANSI lumens and has a built-in battery that provides up to 2.5 hours of video playback. It ships with Google TV with officially licensed Netflix support, so you can start streaming without plugging in a Fire TV Stick or Chromecast. It also includes dual 8W Dolby Audio speakers that are good enough for casual movie nights without needing external speakers.

Anker also took care of convenience with Intelligent Environment Adaptation, which automatically handles autofocus, keystone correction, screen fit, and obstacle avoidance in just a few seconds after you move the projector. It isn’t as bright as the latest laser projectors from XGIMI or JMGO, but for buyers who value portability and an all-in-one streaming experience over headline brightness figures, it’s still one of the strongest options in its class.

How I’d decide

If you’ve got two weeks of patience, wait for the Elfin Flip 4K or Laser. You’re paying full price, but you get the newest light engine on the market and the longest runway before it feels behind. That’s the right call if you’re keeping this thing for years or actually want 4K in something you can throw in a bag.

If you want something proven and cheap right now, the Vibe One or Anker are genuinely good value. They’re the smarter pick if 1080p and moderate brightness cover what you actually watch, which, for most people doing casual movie nights rather than building out a dedicated home theater, it does.

Whichever way you go, don’t get hypnotized by a big lumens number on a box. A laser-lit 1080p image will often look sharper in a dark room than a cheaper 4K unit running a weak lamp at full blast. Check whether the brightness rating was measured with the fan on full performance mode, since some of those numbers aren’t sustainable for a two-hour movie without the projector sounding like a hair dryer, and if you’re planning to use any of this outdoors, budget for a power bank or a screen on top of the sticker price.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

The post The 5 best portable projectors right now appeared first on Gizmochina.

A new smart kitchen appliance from Xiaomi is heading to crowdfunding this month. The Mijia Smart Tea Bar Pro Vertical Model has gone live on Xiaomi’s Youpin platform, with sales set to begin on July 20 for 1,099 yuan (~ $165).

The Tea Bar Pro is designed for people who want both quick hot water and properly brewed tea from a single machine. It has a large 5.5-liter water tank and two separate water outlets — one side delivers instant hot water in just 3 seconds, while the other can brew tea just as fast. 

Xiaomi says the two water paths are physically separated so they do not interfere with each other.

Precise Temperature Control and Fast Heating

For hot water, the machine has five preset temperature levels and four cup size options. It takes only 15 seconds to boil water, and the device also includes a 1.2-liter teapot and a sharing pot for serving guests or drinking tea alone.

What’s thoughtful of Xiaomi is to offer a built-in cleaning system. The Tea Bar Pro has a 10-liter storage compartment that can hold 8 to 15 cups. This space automatically sterilizes and dries stored cups using UVC ultraviolet light and 70°C hot air. Xiaomi says this process kills at least 99.99% of tested bacteria, spores, and fungi, based on independent lab testing.

Visually, the appliance has Xiaomi’s familiar minimalist white design and a 2.8-inch color touchscreen on top for controls. Meanwhile, it also supports Xiao AI to pass instructions via voice command. The interface is built to be simple and shows real-time status and alerts to make it easy to use for all age groups. 

The machine also supports several preset tea brewing modes for different types of tea. Users are able to add their own custom tea recipes to match personal taste via the Xiaomi Home app. And once you’re done with brewing mode, the process runs automatically, adds water as needed, and stops once the pot is full, so users do not need to monitor it. After brewing, the machine can also keep tea warm automatically.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source)

The post Xiaomi launches Smart Tea Bar Pro with instant hot water and self-cleaning storage appeared first on Gizmochina.

Xiaomi is preparing to launch the Redmi Note 17 5G in China, after which the phone will head to the global market, including India. New details about the phone’s Indian variant have now surfaced, thanks to a leak from tipster Abhishek Yadav on X.

According to the report, the Redmi Note 17 5G will launch in India with 6GB RAM and 128GB storage. Xiaomi is likely to add more RAM and storage combinations closer to the launch date, so buyers who want higher storage may see more options later.

For colors, the leak reveals two shades for India: Blue and Dark Night. 

What do we know about the Redmi Note 17 5G?

This leak comes a few days after Redmi confirmed the Note 17 series’ launch date, design, and battery details for the Chinese market. The company has skipped the Note 16 branding and moved directly from Note 15 to Note 17. 

Redmi has also shared the first look at the Note 17 and Note 17 Pro, both of which have a camera module at the top-left corner of the back panel, unlike the centred module on the Note 15 series.

The base Note 17 model is tipped to carry a Snapdragon 4 Gen 4 chipset, a 7-inch 1.5K OLED display, and an 8,000mAh battery, along with a 50-megapixel main camera and stereo speakers. 

Meanwhile, the Note 17 Pro is expected to feature a Snapdragon 6s Gen 4 chip with the same 9000mAh battery and a 50-megapixel main camera. Both models are said to retain dust and water resistance. 

The India launch typically follows the China debut by a few months, based on the pattern seen with earlier Redmi Note series. Full specifications, pricing, and additional variants for the Indian market will be confirmed closer to launch. We will keep you updated about it.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source)

The post Redmi Note 17 5G Indian variant has its storage and colors leak appeared first on Gizmochina.

A new leak is giving us an early look at another color option for the upcoming Google Pixel 11 Pro Fold. A source that goes by the alias Mystic Leaks on Telegram posted a render of the upcoming Pixel Fold in a shade called “Pine.”

The render shows a low-saturation gray-green color. Visually, it looks more or less similar to the Jade color of the Pixel 10 Pro Fold. The difference seems to be that the overall tone is likely muted compared to its predecessor. 

Pixel 11 Pro Fold render confirms redesigned camera module

The render also shows a change to the camera module. Compared to the Pixel 10 Pro Fold, the camera bump on this render is smaller, with almost no metal bezel around the lens openings. The main camera and ultra-wide lens are placed at the bottom of the module, while the telephoto lens has moved to the upper right corner. 

The flash unit on the left side is also larger than before. This matches earlier leaks, including CAD renders shared in March that showed a thinner body and a redesigned camera island, as well as other reports pointing to a full camera upgrade for this generation.

Separately, a feature called “Pixel Glow” was found in the Android 17 Beta 4 code. It is said to use lights and colors on the back of the phone to show information, such as calls or notifications. We reported on this feature earlier, and it is still not confirmed whether the Pixel 11 Pro Fold will include it. None of the renders seen so far show any visible LED hardware on the back panel.

Google’s Pixel 11 series, including the Pixel 11 Pro Fold, is expected to be announced in August. More leaks and details are likely to surface before the official launch.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 

(Source)

The post Google Pixel 11 Pro Fold leaks in fresh Pine shade appeared first on Gizmochina.

Xiaomi has introduced a new Mijia Monitor Light Bar 2 through its Youpin crowdfunding platform in China. The campaign is set to begin at 10:00 AM on July 15, with the screen light available for 259 yuan (~$39).

Xiaomi Mijia Monitor Light Bar 2 Specifications

The main selling point of this second-generation light bar is its glare-reduction technology. It uses a redesigned asymmetrical lighting layout with a wide 20.8-degree shielding angle that limits the beam so it only falls on the desk surface rather than spreading toward the user’s eyes or bouncing off the screen. Xiaomi calls it a “light without visible glare” setup.

To achieve accurate lighting, the bar uses 108 custom full-spectrum LED chips. Xiaomi says this design cuts down on harmful blue light while closely mimicking the quality of morning sunlight.

On color accuracy, the device scores Ra 96, R9 95, CQS 98, and Rf 97 — all measures of how naturally colors appear under its light.

In terms of raw brightness, Xiaomi says the light bar outperforms the AA-grade standard used for reading lamps. Depending on how high you mount it — 40cm, 45cm, or 50cm above the desk — it can produce maximum illuminance ranging from 1,100 to 1,800 lux.

The light bar extends to 50cm and comes with an upgraded clamp that can grip monitors with curvatures between 1000R and 1800R, and screens ranging from 5mm to 65mm thick.

You get a small wireless dial for controls. Users can rotate it to adjust brightness or press and turn to shift color temperature. It can also save custom lighting presets for work, study, or relaxation and can link up with Xiaomi’s HyperOS Connect ecosystem for broader smart home control.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 

(Source)

The post Xiaomi launches Mijia Monitor Light Bar 2 with wireless controller through crowdfunding appeared first on Gizmochina.

Tipster Digital Chat Station has shared new details about iQOO 16 in a fresh leak this morning. According to the tipster’s latest Weibo post, an engineering sample built around the Snapdragon 8 Elite Gen 6 Pro chipset is currently being tested with high-end symmetrical dual speakers from the 1115 series.

Alongside the speaker setup, the same prototype is said to include a 0916 series X-axis linear motor for more precise haptic feedback, a dedicated graphics chip to boost gaming performance, and a 3D ultrasonic fingerprint sensor for biometrics.

The device is also tipped to carry IP68 and IP69 ratings for dust and water resistance, USB 3.2 support, and an AR film layer on the display. Likewise, an OV50Q sensor will power the main camera.

iQOO 16 to feature 8500mAh battery

Interestingly, the tipster’s comment section added a few more clues. When asked whether iQOO 16 will house a squarish, quadrangular camera module, Digital Chat Station gave a noncommittal answer. On battery capacity, though, the tipster more or less confirmed the phone will house an 8,500mAh cell.

This isn’t the first time the 8,500mAh figure and symmetrical speaker setup have come up. As we reported last month, the same battery capacity and flagship-grade speaker configuration were tipped alongside a 2K flat display featuring a new customized panel material and an ultra-high refresh rate meant to improve gaming and multimedia performance. 

Separately, another leak had suggested the iQOO 16 Ultra variant may be skipped this generation due to rising memory costs, leaving the standard model as the star of the lineup.

While the post doesn’t name the phone directly, the hints and the ongoing comment thread suggest it’s likely the iQOO 16. This tracks with what has already surfaced about the device, including its Snapdragon 8 Elite Gen 6 Pro chipset, 2K flat display, and flagship-grade symmetrical speakers.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 

The post iQOO 16 tipped with dual speakers, X-axis motor, and 8,500mAh battery in fresh leak appeared first on Gizmochina.

A fresh Geekbench listing has given away most of what there is to know about the upcoming Redmi 17C 5G, and it turns out there isn’t much new here. The benchmark shows the phone under the codename “tornado,” which interestingly is also the codename for Redmi 15C 5G and the POCO C85 5G, both of which are already on sale in several markets. 

Xiaomi already has a plain 4G version of the Redmi 15C out there too, so it’s clear the company is simply reshuffling the same hardware across its budget lineup under different names.

Redmi 17C 5G Geekbench

Going by the listing, the Redmi 17C 5G will run on the MediaTek Dimensity 6300 chipset that Xiaomi has already used across its budget 5G lineup this year. It’s not built for heavy gaming, but it should handle everyday tasks smoothly while keeping power draw low.

Not much has leaked about the Redmi 17C 5G, but if it’s a rebrand you can expect a large 6.9-inch LCD panel with 720p resolution. Camera-wise, the device is likely to house a 50MP main sensor for photos and an 8MP front camera for selfies and video calls. 

As for battery, you can expect a 6,000mAh cell with 33W fast charging support. The phone is also expected to launch with Android 16 right out of the box, running on top of Xiaomi’s HyperOS.

So far, the Redmi 17C 5G is tipped for global and Indian markets only, with no word yet on a China launch. Pricing hasn’t surfaced either, but the Redmi 15C 5G launched in India at under $140, so the 17C is likely to launch at the same price. 

We’ll share pricing and launch details as soon as they’re confirmed.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

Via: X (@kacskrz)

The post Redmi 17C 5G leak confirms it’s basically a rebadged Redmi 15C 5G appeared first on Gizmochina.

Indian smartphone maker Lava has started its marketing push before its planned entry in the United Kingdom. The company has set up a social account for UK users, and interestingly, the marketing team is taking a dig at Samsung to hype its arrival. 

The account’s bio reads “Escape the SAMe cycle,” where the highlighted word “SAM” is a reference to Samsung, which holds a large share of the UK smartphone market.

Lava has shared two posts on the account so far. The first shows a cluttered screen of Samsung app icons with the caption saying the mess is “obviously” not yours. The second shows a phone with a triple rear camera and the line “Buying new shouldn’t feel so… SAMe.”

Lava enters UK as its first major international market to make a global Indian brand

Lava has previously confirmed it’s entering the UK market in 2026 as part of a plan to build what the company’s Managing Director Sunil Raina calls a genuinely global Indian brand. 

The company had earlier sold phones in the Middle East, Africa, and Latin America but pulled back from those regions to focus on India first. It currently exports to Nepal and Bangladesh, where it has a meaningful share in the market.

For the UK, Lava is expected to stick to the same pricing approach that has worked for it at home — keep phones around the £300 mark rather than competing in the flagship space. Raina has said the company sees no need to chase the premium segment right away, since its growth in India has come almost entirely from mid-range devices.

Lava has not said which phone will launch first in the UK. The company recently announced Agni 4 in India with a Dimensity chipset and the brand’s own on-device AI assistant. Likewise, its budget-focused Yuva Star 3 shows the same value-first approach at a lower price point. 

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post This Indian smartphone brand is entering Europe by taking digs at Samsung appeared first on Gizmochina.

A good monitor matters more than most people think when building a gaming setup. A fast GPU cannot show its full potential on a slow, low-refresh screen. The good news is that 2026 has been a strong year for budget displays. 

Panel costs have dropped, and several brands have pushed 1440p resolution and refresh rates past 200Hz into the sub-$200 price bracket. Below are some of the newest options launched in 2025 and 2026 that are worth considering.

Dell SE2726HGS

First on the list are two 27-inch monitors from Dell — the SE2726HGS and SE2726HG — that start at $140. Both use a 1920 x 1080 IPS panel with a 240Hz refresh rate and AMD FreeSync Premium support to cut down on screen tearing. The screen also has a 5ms response time in standard mode and 0.5ms in extreme mode, and the panel covers 99 percent of the sRGB color space. 

The SE2726HGS gets a stand with height, swivel, and tilt adjustment, while the SE2726HG sticks to a basic tilt-only stand. For eye comfort, the monitor also has low blue light mode, flicker-free operation, and an anti-glare coating. These Dell monitors are a straightforward pick for anyone who wants a high refresh rate 1080p screen without paying extra for design flourishes.

Alienware AW2526HL

Alienware’s AW2526HL is a 24.5-inch monitor that retails for around $175. It runs a 1920 x 1080 IPS panel natively at 300Hz, which is unusually fast for this price range, and pairs it with a 1ms grey-to-grey response time. You also get 400 nits of brightness with a 1000:1 contrast ratio, and the panel covers 99% sRGB for accurate colors. 

It supports AMD FreeSync Premium and VESA Adaptive-Sync, plus TÜV Rheinland-certified blue light reduction. The stand allows tilt, height, and pivot adjustment, and the monitor is VESA mount compatible. For connectivity, there are HDMI 2.1 ports and one DisplayPort 1.4 input.

Redmi G27Q 2026

Xiaomi’s Redmi G27Q 2026 is one of the more aggressive releases of the year. It is priced at around $190 and brings in a 27-inch 2560 x 1440 IPS panel with a 320Hz refresh rate and 1ms GTG response time. It also supports AMD FreeSync Premium, VESA DisplayHDR 400, a 1000:1 static contrast ratio, 95% DCI-P3 and 100% sRGB color coverage, and 10-bit color depth for smoother gradients. 

Xiaomi is also factory-calibrating the panel to a Delta E under 2, which means colors should look accurate out of the box. It has two DisplayPort 2.1 ports and two HDMI 2.0 ports for connectivity. Availability outside China has not been confirmed yet, so buyers elsewhere may need to wait for a global release or import listing.

Redmi G27Q 240Hz

Before the 2026 edition, Xiaomi released the Redmi G27Q 240Hz, which is still worth looking at if it shows up on sale. It uses the same 27-inch 1440p Fast IPS panel design, running at 240Hz with a 1ms GTG response time and AMD FreeSync Premium support. 

It carries HDR400 certification with 400 nits peak brightness, and covers 95 percent DCI-P3 and 100 percent sRGB. It’s originally priced at around $206, but you can occasionally get it below $200. This is a good choice for anyone who wants 1440p and a high refresh rate but does not need the newer model’s extra 80Hz.

ViewSonic VA27G11-2

For a lower-cost option, the ViewSonic VA27G11-2 costs around $84, well under budget. It is a 27-inch 1080p IPS panel with a native 144Hz refresh rate that can be overclocked to 175Hz. Likewise, the response time is rated at 1ms MPRT and 5ms grey-to-gray, and brightness reaches 350 nits with a 1500:1 contrast ratio. 

The panel covers 100% sRGB and supports both AMD FreeSync and Nvidia G-Sync. You also get extra features like HDR10 support, a black stabilization mode, a built-in crosshair overlay, flicker-free backlighting, and hardware-level low blue light filtering. It is a practical pick for gamers on a tighter budget who still want a smooth 1080p experience.

KTC H27T22C-3

KTC has become a familiar name in this price range, and the H27T22C-3 is one of its stronger recent releases. It has a 27-inch 1440p IPS panel with a 200Hz refresh rate that can be overclocked to 220Hz. You also get a 1ms response time and 450 nits of brightness.

It is priced at around $150, making it one of the more affordable 200Hz monitors on the market. And not to forget, it also supports adaptive sync and includes a fully adjustable stand.

Which One to Pick

Of course, the right monitor for you depends on the budget, size, and features you want. The Alienware AW2526HL or the ViewSonic VA27G11-2 are good pick if you are considering a 1080p or fast refresh rate monitors.

If higher resolution is what you seek, the Redmi G27Q 240Hz or the KTC H27T22C-3 offer strong value. The newer Redmi G27Q 2026 is also worth watching for a wider release if 320Hz appeals to competitive players. Whichever model you choose, it’s better that you check that the monitor has at least FreeSync or G-Sync compatibility, and a lower response time. This will help you avoid a display that looks good on paper but struggles in fast motion.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Best Budget Gaming Monitors Under $200 (2026) appeared first on Gizmochina.

A week is all it took. Samsung Galaxy M47 5G, which went on sale in India on July 4, is already selling at a higher price than what buyers paid at launch.

The base 6GB/128GB variant launched at Rs 25,999, while the launch offer further discounted the price to Rs 22,999. However, the same variant is now selling on Amazon India for Rs 32,999, an increase of Rs 7,000. 

The other two variants saw similar jumps. The 8GB/128GB model, launched at an effective Rs 25,999, now sells for Rs 36,999. The top-end 8GB/256GB version, which started at Rs 30,999, is listed at Rs 41,999. Both variants cost Rs 8,000 more than their launch-week prices.

Samsung Galaxy M47 price hike doesn’t add up

Smartphone prices in India have been climbing for months now, and this isn’t an isolated case. Brands across the board have raised prices on multiple models over the past year. 

Nothing, Realme, and Xiaomi are raising the prices of existing devices to offset rising memory costs. But the trend makes sense for phones that launched before memory costs spiked, since brands need to adjust for expenses they didn’t originally plan for.

What doesn’t add up is Samsung doing the same thing to a phone it launched only a week ago. If the M47 5G was priced at INR 25,999 on July 4 — even less with a discount — Samsung already knew what memory and components cost at that point. 

Raising the price so soon after launch looks less like a response to changing costs and more like the launch price was never meant to stick around. If that’s true, Samsung basically used a short-lived offer to draw in early buyers before settling on a higher price. 

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Samsung Galaxy M47 price shot up by Rs 8,000 in India just a week after launch appeared first on Gizmochina.

The Redmi Note 17 series is making its debut on July 14 — this Tuesday. The brand has confirmed a few specs before launch, including the Note 17 being its first phone with a 7-inch screen. Now, tipster Fixed Focus Digital on Weibo has shared more detailed specifications for the upcoming Redmi Note 17 and Redmi Note 17 Pro. 

Redmi Note 17 / Note 17 Pro Specifications

According to the leak, the standard Redmi Note 17 will run on a Snapdragon 4 Gen 4 processor. The phone is said to feature a 7-inch 1080p Samsung E4 Pro display with brightness ranging between 1200 and 1800 nits. Power comes from an 8000mAh battery with 45W wired charging, along with 22.5W wired reverse charging support. 

On the camera front, the phone is tipped to carry a 50MP main sensor, along with a short-focus optical in-display fingerprint sensor. The device is also said to carry an IP65 rating and use a plastic frame.

The Redmi Note 17 Pro, meanwhile, is tipped to come with a more powerful Snapdragon 6s Gen 4 chipset. It is said to sport a 6.83-inch 1.5K flagship-level flat display with peak brightness of up to 3500 nits. The Pro variant is expected to house a larger 9000mAh battery with 67W wired charging and the same 22.5W wired reverse charging. 

Like the standard model, it is also tipped to include a 50MP main camera and a short-focus optical fingerprint sensor. Durability appears to be a bigger focus on the Pro, with reported IP66, IP68, IP69, and IP69K ratings, compared to the IP65 rating on the standard Note 17. Both phones are said to retain a plastic frame despite the upgrades.

These figures largely match what the company has already confirmed through official teasers, which had detailed the Note 17 Pro’s 9000mAh battery, 67W charging, and 3500-nit display ahead of launch. 

The design of both models has also been revealed already, confirming a new rectangular camera module placed in the top-left corner of the rear panel. 

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Redmi Note 17 and Note 17 Pro full specs leak days before launch appeared first on Gizmochina.

Hisense has officially started teasing its new e-ink phone, called the Hisense A10, in China. It comes with a 6.13-inch e-ink display on the front, built to mimic the look of paper. As usual, its best uses are reading e-books, taking notes, and studying for exams, while keeping power consumption low and reducing eye strain during long sessions.

Hisense A10 is unique with a detachable secondary screen

The standout feature, though, is on the back. The A10 uses a magnetically detachable color LCD panel that can be snapped on when users want to view images, comics, or charts in color, or use the phone for entertainment and social apps.

This is a similar approach to what BigMe has tried with its HiBreak Dual, which also pairs an e-ink front panel with a secondary color screen. However, Hisense’s version lets users remove the color panel entirely rather than keeping it fixed to the back.

By offering both a fixed e-ink screen and a removable color display, the A10 lets people switch between the two depending on what they’re doing, rather than settling for one type of screen at all times.

On the hardware side, the A10 runs on a 4nm octa-core Qualcomm chipset, ships with Android 16, and supports 5G and Wi-Fi 6.

The price is not official yet; however, Hisense is expected to launch the device at CNY 3,999 (~ $590).

Hisense has been building out this lineup for a while. Its earlier A9, launched in 2022, shipped with a 6.1-inch, 300 PPI e-ink screen and a Snapdragon 662 chip, and was priced at 1,799 yuan. That phone was later re-released with more RAM and storage in 2025.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Hisense’s new e-ink phone has a detachable color screen appeared first on Gizmochina.

Motorola is set to launch the Edge 70 Max smartphone on July 15 in India. Ahead of the reveal, the company has shared the core specifications of the phone through a listing on Flipkart. It confirms the phone will use a Qualcomm Snapdragon 8 Gen 5 chipset and support magnetic wireless charging, a feature we’ve been tracking since its certification listing surfaced.

Motorola Edge 70 Max Specifications 

The Edge 70 Max will run on the Snapdragon 8 Gen 5, built on a 3nm process. It will be paired with up to 12GB of LPDDR5X RAM. Motorola is using a 5500 mm² vapor chamber cooling system to keep the thermals in check, and the phone is expected to score over 3 million points on AnTuTu.

On the front, you get a QHD+ LTPO panel with a 144Hz refresh rate and a peak brightness of 7000 nits. It supports 10-bit color depth, DCI-P3 wide color coverage, and is protected by Corning Gorilla Glass 7i. The screen-to-body ratio is listed at 95.12 percent.

The Edge 70 Max will have a 7100mAh battery. It supports 90W wired charging and 25W magnetic wireless charging.

The phone will have an aluminum alloy frame and a glass back cover. The camera module layout looks similar to the one on the Lenovo Legion Y70, and is expected to house a 50-megapixel Sony LYT-710 primary camera with a 1/1.56-inch sensor, along with a flat display and premium design. The handset is expected to be available in Green, Light Blue and Black colour options.

This follows a series of leaks and teasers building up to launch. Our earlier coverage of the Flipkart teasers had already pointed to the Snapdragon 8 Gen 5 chip and magnetic charging support, while leaked renders shared last month gave an early look at the phone’s design and camera setup.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Motorola reveals Edge 70 Max chipset, display and battery ahead of launch appeared first on Gizmochina.

After getting the FCC approval earlier this week, the upcoming Insta360 X6 has revealed itself in the first set of images. The leak comes from Roland Quandt of WinFuture, who spotted the action camera listed at a retailer. A retail listing at this stage typically confirms that a launch announcement is close.

Insta360 X5 Specifications

A big change for the new model seems to be the design. Instead of the longer body seen on earlier models, the X6 now has a shorter, more compact shape that looks closer to a traditional action camera. 

The general layout remains largely unchanged. The camera still uses two lenses, one on the front and one on the back, in a curved fisheye lens to capture 360-degree footage. 

The X6 also retains the small screen on the side of the device, though it has been redesigned with slightly different rounded edges compared to previous versions. Based on past models, this screen is likely to handle basic settings and let users preview what they are recording before and after a shot.

In terms of performance, the action camera is said to cap out at 8K 50 frames per second in full 360-degree mode. This is an improvement over the X5, which is limited to 8K at 30 frames per second in the same mode. 

Lucky for us, even pricing is out for both standard and combo. The base Insta360 X6 is expected to start at around €689 without any extra accessories, while the more complete “Essentials Bundle” could cost about €789. 

No official release date has been confirmed at this stage. However, given that retail listings have already surfaced, further details and an official announcement may follow in the coming weeks. We will continue to update this story as more information becomes available.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

(Source)

The post Insta360 X6 first images confirm redesign, specs, and price leak too appeared first on Gizmochina.

Thunderbolt 5 docking stations are finally here  — from brands old and new. Although Intel unveiled this next-generation connectivity standard back in 2023, it took another couple of years for laptop makers and accessory brands to catch up. It wasn’t until 2025 and 2026 that the first wave of Thunderbolt 5 docks became widely available in the US, alongside laptops capable of taking advantage of their higher bandwidth.

The wait wasn’t just about getting a newer connector. Thunderbolt 5 doubles the available bandwidth over Thunderbolt 4 and opens the door to faster external SSDs, multiple high-resolution monitors, higher refresh rate displays, and more demanding desktop setups, all through a single cable.

Of course, not every Thunderbolt 5 dock is built the same. Some prioritize a huge selection of ports, while others focus on charging power, display support, or compact designs that are easier to carry between home and the office. 

We’ve rounded up the best Thunderbolt 5 docking stations you can buy right now, whether you’re building a multi-monitor workstation, expanding your laptop’s connectivity, or simply looking for the fastest dock available.

UGREEN Maxidok 17-in-1 and 10-in-1

UGREEN entered the US market with two docks under its Maxidok line, part of the Revodok series. The Maxidok 17-in-1 includes 17 ports total, two Thunderbolt 5 ports rated at up to 120Gbps, three USB-A and three USB-C ports at 10Gbps, and a built-in M.2 NVMe SSD slot that supports drives up to 8TB over an 80Gbps connection (full specs and pricing here). It supports up to 140W of charging and can drive dual 8K displays on compatible Windows systems.

The Maxidok 10-in-1 is the lower-priced model, listed between $229 and $249. It carries the same 120Gbps data rate and can output to a single 8K display or dual 6K displays on Thunderbolt 5 Macs, along with 140W of total power delivery. Both docks went on sale in the US in March 2026, with the 17-in-1 priced around $389.

Satechi Thunderbolt 5 CubeDock

Satechi’s first Thunderbolt 5 product, the CubeDock, was first announced at CES in January 2026 and has begun shipping this spring only. It is built as a small aluminum cube sized to match Apple’s Mac mini. It includes a slot for an M.2 NVMe SSD and supports up to 8TB of storage with read and write speeds up to 6,000MB/s.

The CubeDock has three downstream Thunderbolt 5 ports, a 2.5Gb Ethernet port, SD and microSD card readers, and 140W of laptop charging via an 180W external power supply. It supports dual 6K displays at 60Hz on compatible Macs, and up to three displays on Windows systems or the newest M5 Pro and Max MacBook Pro models. It does not include a built-in HDMI or DisplayPort output, so some monitors will require an adapter cable. It’s priced at $399.99.

Keychron’s First Docking Station

Keychron, known mainly for keyboards and mice, released its first docking station just recently. The Thunderbolt 5 Dock (14-in-1) uses an Intel-certified Thunderbolt 5 controller, offers 80Gbps of bidirectional bandwidth, and supports up to four external displays with 140W of charging over a single cable. 

The dock uses a CNC-machined aluminum chassis with a fanless cooling design and can be oriented vertically or horizontally on a desk (full launch details here). Ports include Thunderbolt 5, HDMI, USB-A, USB-C, 2.5G Ethernet, and memory card slots. It works with both Windows and Mac systems and is backward compatible with Thunderbolt 4 and USB4. It is priced at $349.99 in the US.

Kensington SD5010T5 EQ

Kensington released the SD5010T5 EQ in May 2026 as a lower-cost entry into Thunderbolt 5 docking. It runs at 80Gbps of data speed and supports triple 4K monitors or dual 8K monitors on Windows systems. For connectivity, you get 13 total ports, 140W of charging, a 2.5Gbps Ethernet port, and SD and microSD card slots.

It is also compatible with Thunderbolt 5, Thunderbolt 4, USB4, and USB-C devices running Windows 11 or macOS 14.5 and later. The case uses recycled aluminum, and Kensington includes free DockWorks software for Windows users to adjust settings. It is priced at $299.99.

Belkin 14-in-1 Thunderbolt 5 Dock

Belkin added a 14-in-1 Thunderbolt 5 dock to its lineup, connecting through a primary Thunderbolt 5 upstream port that delivers up to 140W of charging. The dock runs at 80Gbps for standard transfers and reallocates bandwidth up to 120Gbps for high-resolution or high-refresh displays (full specs here). 

The dock can output video via one DisplayPort 2.1 port and one HDMI 2.1 port, both rated up to 8K at 60Hz or 4K at 240Hz. On compatible Windows machines, it can drive up to three external 4K displays at 144Hz. The aluminum chassis also includes a 2.5 Gigabit Ethernet port, a 3.5mm audio jack, and UHS-II SD and microSD card readers.

Plugable TBT-UDT3 and TBT-UDH2

Plugable’s TBT-UDT3, on sale since 2025, has three Thunderbolt 5 ports running at the full 120Gbps boost rate, enough to run three external monitors, along with 2.5GbE, SD and microSD slots, USB ports, and 140W of charging, priced at $299.95. It received a Macworld Best of 2026 award and a PCWorld Editors’ Choice badge. It does not include built-in HDMI, so multi-monitor setups need adapter cables.

Plugable also introduced a new flagship model, the TBT-UDH2, at CES 2026. Unlike the TBT-UDT3, it includes two built-in HDMI 2.1 outputs, supporting two 4K monitors at 144Hz without adapters, along with additional USB connectivity and 140W of host charging.

Lenovo ThinkPad Thunderbolt 5 Smart Dock 7500

Lenovo introduced the ThinkPad Thunderbolt 5 Smart Dock 7500 alongside two lower-tier docks at IFA 2025. The Thunderbolt 5 model delivers up to 120Gbps of bandwidth and supports three 8K displays at 60Hz plus a fourth 4K display, or two 4K displays at 240Hz alongside two more at 120Hz (full lineup details here). 

It provides PD 3.1 charging up to 180W and includes cloud-based management tools for IT departments to monitor and update docks remotely. It became available starting October 2025 at €399.

Things you should consider

A Thunderbolt 4 dock remains a lower-cost option for basic setups involving a single monitor and a handful of USB devices. Thunderbolt 5 docks are for users working with large video files, multiple high-resolution displays, or fast external storage. 

Among the models covered here, the UGREEN Maxidok 10-in-1 and Plugable TBT-UDT3 offer lower prices relative to their port count and speed, while the Satechi CubeDock and UGREEN Maxidok 17-in-1 add built-in SSD storage for users who need it. Keychron, Kensington, Belkin, and Lenovo’s new entries give buyers additional options across different price points and use cases. At the end, the best Thunderbolt 5 docking station depends on your usage and budget.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

The post The 7 best Thunderbolt 5 docking stations to buy in 2026 appeared first on Gizmochina.

It hasn’t been that long since Xiaomi announced the Xiaomi Smart Band 10 Pro. However, the company has already started working on the successors. The Xiaomi Smart Band 11 has already been spotted on Taiwan’s NCC database. Now, two new Xiaomi devices have just cleared network access approval in China, and tipsters say they belong to the upcoming Mi Band 11 series.

What got approved

China’s Ministry of Industry and Information Technology gave the green light to two Xiaomi Bluetooth devices, carrying model numbers M2616B1 and M2617B1. According to tipster Experience More, these two models are the Xiaomi Smart Band 11 and the Xiaomi Smart Band 11 NFC version. They will succeed the Xiaomi Smart Band 10 and Band 10 NFC. 

Meanwhile, UL listing of the band confirms a battery capacity of 233mAh, the same as the current generation. 

Another leaker, Smart Pikachu, says the Mi Band 11 is on track for a release in the second half of this year.

For context, Xiaomi followed a similar certification pattern with its last flagship band. The Band 10 Pro used model numbers M2551B1 and M2553B1 for its standard and NFC versions. There was also a separate sighting in May, when a wearable with model number M2561B1 turned up in certification databases in Singapore and Taiwan, listed simply as a “smart bracelet.”

What we know about the current Smart Band 10 series for comparison

Since full specs for the Mi Band 11 haven’t surfaced yet, it’s worth looking at what the current Smart Band 10 offers. Xiaomi’s existing base model packs a 1.72-inch AMOLED display with 1500 nits peak brightness, a 233mAh battery rated for up to 21 days, over 150 sports modes, and HyperOS 2.0 software, as we reported when the Smart Band 10 launched in China. The Pro variant goes further, with a 1.74-inch, 2000-nit display, HRV tracking, built-in GNSS, and Apple Health support.

If the Mi Band 11 keeps the same battery size, expect Xiaomi to lean on software and sensor upgrades instead of a battery bump. More details should surface as the second-half launch window approaches.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

(Source)

The post Xiaomi Smart Band 11 gets network approval, though the battery stays the same appeared first on Gizmochina.

A new leak claims Apple‘s upcoming foldable iPhone, expected to be called the iPhone Ultra, may have a screen as flat as the Oppo Find N6. The claim comes from blogger Fixed Focus Digital, who says the iPhone Ultra’s crease will be among the best in the industry.

The Oppo Find N6 from earlier this year is known for its flat screen despite being a foldable. It uses a 2nd-Generation Titanium Flexion Hinge made with 3D Liquid Printing technology. This process uses laser scanning to find small surface gaps, then fills them with photopolymer droplets. 

As previously reported, Oppo built the Find N6 (review) around a titanium alloy dome hinge and Dome Memory Glass, calling it the flattest foldable screen available. The phone has also received Germany’s Rheinland seamless folding certification, and is durable up to 600,000 folds. 

Apple has two options for iPhone Ultra’s hinge system

According to tipster Fixed Focus Digital, Apple has two options to make the screen crease-less (almost) in iPhone Ultra. Either liquid metal or 3D printing. Apple was initially expected to ship the foldable in limited quantity — blame the memory crisis — hence, it was expected to use a liquid metal-based hinge system. 

Liquid metal is a specialized amorphous metal alloy used in hinge mechanisms. Unlike traditional metals with rigid crystalline structures, it cools into a disordered “metallic glass”. This grants the hinge high elasticity, scratch resistance, and the ability to snap back to its original shape.

However, the tipster says that if Apple manages to bargain with suppliers for memory supply and costs, it can ramp up production and switch to 3D printing technology. That is because manufacturing a liquid metal hinge is more complex and difficult than using 3D printing. Apple will decide on a specific hinge system by the end of July, says the insider.

As for pricing, the base iPhone Ultra model is rumored to start at $2,299 to $2,399, close to double the price of the current iPhone 17 Pro Max.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

(Source 1, 2)

The post Apple is undecided on whether to use liquid metal or 3D printing for its foldable hinge system appeared first on Gizmochina.

The iPhone 18 Pro Max may cost more to build than last year’s model, according to a new report from market research firm Counterpoint Research. The firm says the hardware cost for the 1TB version could rise by nearly $300 compared to the iPhone 17 Pro Max in the same storage size.

The main reason for the higher cost is — of course — memory. Counterpoint’s report says rising prices for NAND flash storage and DRAM are the biggest factors pushing up the overall cost of parts. Higher-capacity models, like the 1TB version, are said to be affected more since they use more memory to begin with. This means any increase in memory prices hits these versions harder than smaller storage options.

The New Chip Also Costs More

Memory isn’t the only factor for the price hike. The processor is also more expensive this time. The iPhone 18 Pro Max is expected to use Apple’s new A20 Pro chip, made using TSMC’s 2nm process. 

While the new process will offer improved performance and power efficiency, it also costs more to make, which adds to the overall hardware cost. We have already reported on the iPhone 18 Pro Max’s pricing and rising memory costs, which matches this latest cost report from Counterpoint.

Not all components are getting more expensive, though. Counterpoint expects the display and some other parts to cost less than they did on the iPhone 17 Pro Max, which could help offset some of the increase from memory and the processor. 

Apple May Raise Prices Differently by Storage Size

Since high-capacity models are affected more by memory costs, Counterpoint believes Apple may raise prices differently depending on storage size instead of a flat increase across all models. This would help protect profit margins on higher-capacity phones, which are more exposed to NAND price changes.

Counterpoint also predicts that even if Apple raises the average retail price of the iPhone 18 Pro Max by $200, its profit margin could still end up slightly lower than the iPhone 17 Pro Max. 

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(source)

The post iPhone 18 Pro Max margins could still drop even with $200 price hike appeared first on Gizmochina.

HMD has launched its latest Arc 2 budget smartphone in Thailand. Following up on the HMD Arc from 2024, the device now has new color options, though the design or core specs are not much different from the original. Let’s walk through the specs and pricing details here. 

HMD Arc 2 Specifications

The Arc 2 sticks with a 6.52-inch IPS LCD panel running at HD+ resolution and a 60Hz refresh rate, the same as the first Arc. Software-wise, the phone ships with Android 14 Go Edition, the lightweight version of Android built for entry-level hardware.

The main differentiator here is the processor. HMD has swapped out the original Unisoc SC9863A for the newer Unisoc T603. It’s still an entry-level chip built on a 12nm manufacturing process that tops out at 1.8GHz. It is paired with 4GB of RAM and a choice of 64GB or 128GB of onboard storage, with a microSD card slot available for anyone who needs more room.

Around back, the Arc 2 keeps the same single 13MP main camera as its predecessor. Up front, a 5MP selfie camera sits inside a waterdrop-style notch. Powering the device is a 5,000mAh battery paired with 10W charging. The phone also retains a USB-C port and a 3.5mm headphone jack.

Colors, Pricing, and Availability

HMD is offering the Arc 2 in two colorways: Dark Blue and Golden Beige. It will launch in Thailand on July 20 in two storage options. The 4GB + 64GB version is priced at THB 2,290, which comes to about $68 or €60. The 4GB + 128GB version is priced at THB 2,990, which comes to about $89 or €78. HMD has not said if or when the phone will launch in other countries.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

The post HMD Arc 2 Goes Official With a Fresh Look and a Modest Chipset Bump appeared first on Gizmochina.

iQOO has finally put a date on the calendar for its next budget phone. iQOO India confirmed on X that the Z11 Lite 5G will launch in the country on July 24, and the phone is set to succeed the iQOO Z10 Lite, which arrived in India last June.

Even though iQOO hasn’t shared the full spec sheet yet, one tipster on X had already leaked most of the important details. 

iQOO Z11 Lite Specifications

According to the leak, the iQOO Z11 Lite will run on a MediaTek Dimensity 6300 chipset paired with Mali-G57 MC2 graphics, and it should be available with up to 8GB of RAM and 128GB of storage. On the software side, the phone is tipped to launch with OriginOS 6 built on top of Android 16.

Moreover, the battery is said to come at 6,500mAh, a decent jump from the 6,000mAh unit on the older Z10 Lite. And iQOO is boosting the charging speed too, from 15W to 44W.

On the camera front, the leak suggests a dual rear setup made up of a 50MP main sensor along with a 2MP secondary sensor. The display is expected to measure around 6.74 to 6.78 inches running at a 120Hz refresh rate. The phone is also rumoured to carry an IP64 rating.

Design-wise, an Amazon India listing had already suggested the phone would come in a Solar Flame colourway, and teaser images show a vertical rear camera module with a circular LED ring underneath it for notifications, something like a mini light-up alert system.

iQOO is expected to sell the Z11 Lite through Amazon India, its own official website, and select offline retailers. We’ll keep you updated the moment there’s more to share.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

The post iQOO confirms Z11 Lite launch date, but a leak has already revealed the specs appeared first on Gizmochina.

The Xiaomi 17T Pro is an all-round flagship smartphone with a large 6.83-inch AMOLED screen, a MediaTek Dimensity 9500 chip, a huge 7,000mAh battery, and a Leica-built camera system with a 5x zoom lens. For all this, the company is asking around €899-€999 in Europe, depending on storage size.

But the 17T Pro is not the only strong option in this price range. Several other phones offer similar power, and in some cases, better value. So if you are shopping for a new phone in 2026 and want to compare your choices, here are five solid alternatives worth a look.

Poco F8 Ultra

The Poco F8 Ultra is one of the closest rivals to the Xiaomi 17T Pro, and it comes from the same parent company. Announced in November 2025, it features a large 6.9-inch AMOLED display, but the biggest difference is the chip. Instead of MediaTek, the F8 Ultra runs on the Snapdragon 8 Elite Gen 5. This makes it a great pick for gaming and heavy multitasking.

The phone also has a 6,500mAh battery with 100W wired charging and 50W wireless charging, so it charges fast even though the battery is slightly smaller than the 17T Pro’s. On the camera side, it uses a triple 50MP setup, including a 5x periscope zoom lens. The phone also has Bose-tuned stereo speakers. Why its better is that it’s cheaper at around $729 for the 12GB/256GB model.

OnePlus 15R

The OnePlus 15R is a good choice for people who care most about charging speed and smooth software. Like the F8 Ultra, it runs on the Snapdragon 8 Gen 5 chip and packs a massive 7,400mAh battery. The display is a 6.83-inch AMOLED panel with a fast 165Hz refresh rate. 

The phone runs OxygenOS 16, which is known for being clean and fast, without much extra clutter. It even supports frame-rate interpolation in games that boosts supported titles beyond their normal frame rates for smoother gameplay. 

The camera setup is simpler than the 17T Pro’s, with a 50MP main sensor and an 8MP secondary lens, so it does not match Xiaomi’s zoom range. But for buyers who want strong battery life, fast charging, and a smooth day-to-day experience, the 15R is priced around $699 to $749, undercutting the 17T Pro while offering comparable or better performance.

Honor 600 Pro

The Honor 600 Pro takes a different approach by focusing heavily on the camera and display quality. It has a slightly smaller 6.57-inch AMOLED screen, but it reaches an extremely bright 8,000 nits at its peak. The main camera uses a huge 200MP sensor, paired with a 50MP telephoto lens offering 3.5x optical zoom and up to 120x digital zoom.

While the zoom range is shorter than the 17T Pro’s 5x lens, the image quality from the large main sensor is excellent, especially for detailed daytime shots. The phone runs on the Snapdragon 8 Elite chip and has a 7,000mAh battery with 80W wired charging and 50W wireless charging. It also holds strong IP68, IP69, and IP69K ratings for dust and water resistance. 

The Honor 600 Pro retails starting at €799 in Europe.

Poco X8 Pro Max

For shoppers who want similar power to the 17T Pro but at a much lower price, the Poco X8 Pro Max is worth serious consideration. It is Poco’s first “Pro Max” phone, and packs in surprisingly high-end specs for its price. It uses the MediaTek Dimensity 9500s chip, a slightly toned-down version of the same chip family found in the 17T Pro, along with a 6.83-inch AMOLED display that closely matches Xiaomi’s screen size and quality.

Where the X8 Pro Max really stands out is battery life. It comes with an enormous 8,500mAh battery, one of the largest ever placed in a regular smartphone, along with 100W fast charging. It also carries an IP69K rating, meaning it can survive high-pressure water jets, not just splashes.

The camera setup is more basic, though, housing a 50MP main sensor and no dedicated telephoto lens. Still, with prices starting around $414 to $485, it delivers exceptional value for anyone who wants long battery life and solid performance without spending flagship-level money.

Samsung Galaxy S25 FE

For buyers who prefer Samsung’s software and long-term update support, the Galaxy S25 FE is a worthwhile alternative. It starts retailing at $649, and for the price, you get extremely long software support along with the Galaxy AI features. 

The trade-off is that the S25 FE has a smaller battery and slower charging speeds compared to the 17T Pro, and its camera system does not match Xiaomi’s zoom capabilities. However, it still offers a reliable AMOLED display, solid daily performance, and access to Samsung’s One UI software and ecosystem features, including easy connections with Galaxy tablets, watches, and earbuds. It is a strong pick for people who want a dependable, well-supported phone rather than the most powerful camera or battery on paper.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.

The post 5 best alternatives to the Xiaomi 17T Pro appeared first on Gizmochina.

Xiaomi has introduced another washing machine in its popular Mijia Pro lineup. The new model is called the Mijia Washing Machine Pro 10kg, and it’s now up for pre-sale in China. It is priced at 2,699 yuan (~ $396).

The star feature here is Xiaomi’s Super Electrolysis technology. The machine uses a diamond-coated electrode to instantly charge water, boosting active oxygen levels by 15 times. This active oxygen works its way into fabric fibers to break down dirt and bacteria naturally, without needing any added chemicals. Xiaomi says the process leaves zero residue.

This technology is put to work in a few practical ways. It can tackle 20 common stain types, including soy sauce, juice, and blood, while also whitening yellowed white clothes and protecting colors from fading, matching the effect of about 15 color-guard sheets. On the hygiene side, the machine claims a 99.99% sterilization rate on its own, and when paired with high-temperature steam, that jumps to 99.999% for bacteria and viruses, with 100% mite removal.

Wash modes, built-in AI and more

Its washing performance is rated at a 1.3 wash ratio, well above China’s 1.03 national standard. The machine also handles detergent and softener automatically, dosing within ±0.75ml accuracy based on load weight, with a single fill lasting about a month. Among its wash modes are a 36-minute quick wash, a 12-minute express cycle, and specialty programs for down jackets, wool, and pet hair (claimed 92% hair removal).

The Mijia Washing Machine Pro also includes an AI assistant that learns washing habits over time, off-peak energy scheduling, and remote control through the Mi Home app or Xiaomi speakers. The design uses a star-silver metallic finish with a black mirrored door, and it supports flush, built-in installation. Xiaomi backs the machine with a 10-year warranty on its DD direct-drive motor and 3 years of coverage on the whole unit.

This launch follows a string of similar releases from Xiaomi in recent months, including a 12kg version with the same Super Electrolysis system that arrived in January.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post Xiaomi launches Mijia Washing Machine Pro 10kg with Super Electrolysis tech and smart dosing appeared first on Gizmochina.

Xiaomi Auto has finally put a name to its long-rumored new vehicle lineup. The company officially announced “Sky Nomad” as a new brand that will go in China with the name Xiaomi Pengcheng (小米澎程).

The announcement came this morning through Xiaomi’s newly launched WeChat page for the brand, though no content had been posted there at press time. Xiaomi has also started teasing the brand through city screen advertising in China.

Xiaomi’s Sky Nomad is an EREV series

With Sky Nomad, Xiaomi is expected to tap into the extended-range electric vehicles (EREVs) market. The existing Xiaomi SU7 and YU7 SUV are an SUV and a sedan, respectively. The first model for the new brand is said to be the N90, a full-size SUV powered by an EREV powertrain.

According to earlier reports, the N90 uses a 1.5-liter turbocharged range extender that doesn’t send power directly to the wheels, instead charges the battery and powering electric motors. The car is expected to get a battery pack over 70 kWh, good for 400-500 km of pure-EV range, with combined range exceeding 1,500 km.

The N90 is a genuinely big vehicle too, measuring 5.3 meters long with a 3.1-meter wheelbase, and expected in both five-seat and seven-seat layouts. Spy shots have previously shown the larger variant sporting a roof-mounted tent setup. 

In terms of design, the N90 features blocky headlights, a trapeze-shaped air intake, side bumper air inlets, a high bonnet line, roof-mounted LiDAR, and electric doorsteps. More details are expected closer to launch.

Xiaomi delivered 32,759 units domestically in May 2026 alone, and currently sells the SU7 sedan, SU7 Ultra, and YU7 SUV lineup. With Sky Nomad now official, Xiaomi looks set to take on family-focused SUVs like the Li Auto L9 and AITO M9 later this year.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source 1, 2)

The post Xiaomi officially unveils “Sky Nomad” as its new automotive series for EREVs appeared first on Gizmochina.

Xiaomi unveiled its new 17T series globally in May. Like previous T-series phones, the Xiaomi 17T and 17T Pro are meant to bridge the gap between flagship killers and ultra-premium devices.

The Xiaomi 17T comes with a 6.59-inch AMOLED screen, a Dimensity 8500 chip, and a 6,500 mAh battery. The Xiaomi 17T Pro steps things up with a bigger 6.83-inch 144Hz display, the faster Dimensity 9500 chip, a 7,000 mAh battery, and a Leica-tuned camera system with 5x optical zoom. You can read more about the differences between the two models here. Both phones also carry IP68 water resistance, meaning they can survive a dip in water for a short time.

If you just picked one of these phones up, congratulations. But before you start using it every day, there are a few simple things worth buying to protect it, charge it faster, and get more out of it. Here are the first five things you should add to your cart.

A Good Case

This one is the most obvious, but it’s also the most important. The Xiaomi 17T Pro has an aluminum frame and a glass back, while the standard 17T uses a plastic frame with a glass-fiber reinforced back. Both look great, but glass and metal don’t bounce back well from a hard drop onto concrete.

A simple silicone or TPU case adds a soft, shock-absorbing layer around the edges, which is exactly where most drops do their damage. If you want extra protection, look for a case with raised edges around the camera bump and the screen. This stops the lenses and glass from touching the ground directly if the phone lands face down or camera down.

For people who like a slimmer look, a clear hard case is a good middle ground. It shows off the phone’s color while still covering the corners. Either way, a case is cheap insurance against a repair bill that could cost far more than the phone’s actual value in accessories.

A Screen Protector

Even though the 17T series uses Corning Gorilla Glass 7i on the front, glass can still scratch or crack, especially if it lands on sand, grit, or a rough surface. A tempered glass screen protector is the easiest way to add another layer of defense without changing how the phone feels in your hand.

Tempered glass is a good pick because it keeps the same smooth, glossy feel as the original screen and doesn’t reduce touch sensitivity. Look for one described as “case-friendly,” meaning it’s cut to fit properly with a case installed, so there’s no ugly gap or lifting edge around the border.

If you plan to use the phone for gaming, this step matters even more. Both models support fast touch sampling rates for smooth gaming response, and a poorly fitted or bubbly protector can get in the way of that smooth feel.

A Fast Charger

The 17T or 17T Pro ships with an adapter and cable in the box, but if you want a backup for your bag or desk, it’s worth buying a charger that actually matches the speed the phone can refill at.

The Xiaomi 17T supports up to 67W wired charging, while the 17T Pro can handle up to 100W wired and even 50W wireless charging. Since Xiaomi already ships the essentials for wired duties, you should invest in one that offers wireless charging, especially if you have the Pro model. 

We recently tested the Baseus Spacemate RD1 Pro, which combines a wireless charging pad on top with a full row of wired USB-C and USB-A ports underneath. It’s more of a desk setup than a pocket charger, but it means your 17T Pro can charge wirelessly while a laptop, earbuds case, or power bank charges over a cable at the same time, all from one outlet.

A Pair of Wireless Earbuds

Neither the 17T nor the 17T Pro has a headphone jack, which is now the standard across most phones. That means Bluetooth earbuds are basically a requirement rather than an optional extra.

Interestingly, some early buyers of the 17T series received gifts with their purchase, including Redmi Headphones Neo with the base 17T, and a Xiaomi Smart Band 10 fitness tracker bundled with the 17T Pro. If your unit came with either of these, you may already have a starting point. But if you didn’t get a bundle, or you simply want a nicer pair, it’s worth looking for earbuds that support the same audio codecs the phone offers. Xiaomi’s own Redmi Buds 8 Pro is one option worth a look — it offers 55dB ANC and Hi-Res Audio support.

Extra Cloud Storage

This next one isn’t a physical product, but it deserves a spot on this list. Neither the Xiaomi 17T nor the 17T Pro has a slot for a microSD card, so whatever storage size you bought is the storage you’re stuck with. The Pro model does offer a 1TB option in some markets, which gives plenty of breathing room, but it also costs a lot more. Meanwhile, the base models with 256GB can fill up fast if you take lots of photos or record videos.

Instead of hunting for accessories that promise external storage, it’s smarter to set up a cloud backup plan through Google Photos, Xiaomi Cloud, or another service you trust. This keeps your photos and videos safe even if something happens to the phone, and it frees up space without needing to delete anything permanently. Many services offer affordable monthly plans, and setting this up on day one saves you from a stressful scramble later when storage runs low.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post The first 5 things to buy if you just got a Xiaomi 17T or 17T Pro appeared first on Gizmochina.

Honor was previously tipped to be working on its first wide foldable phone, powered by a 2nm-based Snapdragon 8 Elite Gen 6-series chipset. A follow-up report today spills more details about it, including the cameras and battery size.

According to Digital Chat Station (DCS), the engineering prototype still carries the same screen setup spotted earlier — a 7.6-inch inner display paired with a 5.5-inch outer screen. That’s a notably roomier cover screen than most current foldables offer, and it’s better for everyday tasks like texting, browsing, and watching short clips without needing to unfold the phone every time.

Honor’s wide-foldable has moved up in development stage

What’s changed since the last leak is the phone’s development stage. Instead of just being in testing, the foldable has now entered the final refinement process. That’s a meaningful shift, since it usually signals a device is nearing the end of its development cycle and getting closer to an official announcement.

On the camera front, DCS says Honor’s design team has locked in a 200MP main sensor along with a periscope telephoto lens for zoom shots. The wide foldable is also tipped to pack a 7000mAh battery, which DCS claims would make it the largest battery among flagship foldables in its class. 

Honor is known for fitting a big battery into a slim form in its previous foldable — Magic V6, for instance — so the brand’s attempt to do the same with its first wide foldable is not even surprising.

With the device now in its final refinement stage, an official launch may not be too far off. Honor hasn’t confirmed a release window yet, but as more details trickle out, expect the picture to get clearer in the coming months.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 

The post Honor’s first wide foldable enters final refinement, to feature a 200MP camera and 7000mAh battery appeared first on Gizmochina.

LG has officially launched its xboom Stage 501 portable Bluetooth speaker in the US at $499.99. The speaker was first shown off at CES 2026 earlier this year, where LG teased it as part of a new wave of xboom portable Bluetooth speakers built for music lovers. Now it’s finally available to buy in the US market.

LG xboom Stage 501 Specifications

The biggest highlight of the Stage 501 is its AI Karaoke Master feature. This lets users strip vocals out of almost any song in real time and tweak the pitch, so basically any track can turn into a karaoke session without needing a special karaoke version of the song or a paid subscription. All of this can also be controlled through LG’s companion app.

On the sound side, will.i.am has personally tuned the speaker, and it uses premium acoustic parts made by Peerless. The Stage 501 can push out up to 220W of power if connected to a wall output, but it drops to 160W on battery. LG says the battery itself can last up to 25 hours, and it’s replaceable too. 

The speaker also has a feature called AI Sound to adjust the output depending on what kind of content is playing, and Space Calibration Pro for tuning the sound based on the room or environment the speaker is placed in.

Design-wise, the speaker comes with dual-bar LED lighting, strobe effects, and accent lighting built into the control panel. It has a PA-style look built for performances, along with a dual-handle system for easy carrying. Users can set it up upright, flat, angled, or even mount it on a pole, depending on the space and situation.

As for how to buy it, you can get it from LG’s official website if you are in the US. Plus, there are also financing options available for those who don’t want to pay the full amount upfront. In this case, monthly payments start at $166.66 for a three-month, interest-free plan. Longer plans come with added interest, pushing the total cost slightly higher over six or twelve months.

Buy LG xboom Stage 501 on Amazon US

Buy LG xboom party speaker on Amazon US

Read more from Gizmochina:

• The Best Home Theater Projectors in 2026

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

The post LG xboom Stage 501 party speaker with AI Karaoke launches in the US at $499.99 appeared first on Gizmochina.

Nothing is set to introduce the Nothing Ear (3a) on July 7 — tomorrow — alongside the Phone (4b). Spoiling the fun for the brand, German publication WinFuture has released a set of images, showing the earbuds in all colors. 

The overall design isn’t much different from what we are used to from Nothing. The in-ear buds are packed in a transparent case with a cradle that matches the color of the earbuds themselves. Speaking of which, Nothing is introducing a new pink option for the Ear (3a), while it will also be available in yellow, white, and black. 

Nothing Ear (3a) Specifications 

As for the specs, the Ear (3a) is said to house 12mm audio drivers that will support LDAC and Hi-Res Audio Wireless. The marketing material also reveals a feature called “audio snapshots.” New for Nothing earbuds, the feature could be an easy way to take quick voice memos. 

It can be enabled by pressing the touch-sensitive area in the stem, but while on calls, it starts call recording. There is no word on whether the earbud supports active noise cancelling, but since they have an in-ear tip-style design, you can expect a decent level of noise cancellation nonetheless. 

According to the report, the Ear (3a) could cost around €99 in Europe. A direct conversion means you could be spending close to $115 in the US, but Nothing usually decides the US price separately. We are expecting an MSRP of $99. That’s for Nothing to decide, and since the launch is just a few hours away, you won’t have to wait that long for full official details.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

Buy Nothing Ear a earbuds on Amazon India

Buy Nothing Ear a earbuds on Amazon US

Read more from Gizmochina:

• Best TWS Earbuds for Gaming

(Source)

The post Nothing Ear (3a) poses for pictures in new color options before launch appeared first on Gizmochina.

Keychron, the Hong Kong-based peripheral brand best known for making keyboards and mice, has launched its very first docking station. The new device is called the Keychron Thunderbolt 5 Dock (14-in-1), and as the name suggests, it comes with 14 ports and has a shiny aluminium body. 

The dock is priced at $349.99 in the US. 

Keychron Thunderbolt 5 Dock (14-in-1) Specifications

Starting with the visuals, the dock has a CNC-machined aluminum alloy chassis that gives it a sturdy and premium feel. The dock has a fanless cooling system that delivers passive heat dissipation, thanks to the through-vent grille design and an internal aluminium heat spreader. 

The design is simple, minimalist, and functional, as you can use the dock either standing up (vertically) or lying flat (horizontally). 

The talk for any docking station is undoubtedly about connectivity. The front of the dock includes a power button, indicator lights, one USB-C port with 10Gbps speed, and two USB-A ports also running at 10Gbps. It also has a pair of card readers that support both SD and microSD cards under the UHS-II, 4.0 standard, which delivers up to 312 MB/s speed. 

The back of the dock carries most of the connections. This includes one upstream Thunderbolt 5 port, which can deliver up to 140W of power to a connected laptop, along with three separate downstream Thunderbolt 5 ports for connecting additional devices.

There are also two more USB-A ports running at 10Gbps, two HDMI 2.1 ports for connecting monitors or TVs, and one 2.5GbE Ethernet port for wired internet connections faster than standard Gigabit Ethernet. Rounding out the features are two Kensington security lock slots, which allow the dock to be physically locked down to a desk or surface.

The Keychron Thunderbolt 5 Dock (14-in-1) is now available for purchase directly from Keychron’s official website.

Buy Keychron 14-in-1 docking station on Amazon US

Buy Keychron dock USB-C hub aluminium on Amazon US

Buy Keychron dock USB-C hub aluminium on Amazon India

Read more from Gizmochina:

• Best Laptop Power Banks in 2026 — Buying Guide

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

(Source)

The post Keychron launches its first docking station with 14 ports and an aluminium chassis appeared first on Gizmochina.

Xiaomi has launched its new Mijia Desktop Photo Printer 2 in China on its Youpin crowdfunding platform, with the campaign set to begin on July 13. The printer itself carries a price tag of 699 yuan (~$102), while the 4-inch dual-panel photo paper costs 69.2 yuan (~$10), and the 6-inch 4-color professional photo paper is also priced at 69.2 yuan (~$ 10).

Xiaomi Mijia Desktop Printer 2 Specifications

The new model builds on the existing Mijia Photo Printer 1S from 2020, and Xiaomi has laid out a detailed comparison between the two devices. The biggest change is the printing technology itself. The Photo Printer 2 moves from 3-color dye sublimation to a 4-color dye sublimation process that adds a black K layer, which should help produce sharper text and deeper blacks in printed photos.

The new printer can further handle 4-inch double-sided photo paper priced at 0.99 yuan per piece, square adhesive photo strips at 2.48 yuan per piece, and 6-inch photo sheets available in both 3-color (1.61 yuan) and the newer 4-color dye sublimation option (2.48 yuan). By comparison, the 1S only supports square adhesive paper and 6-inch sheets, and does not offer 4-color printing at all.

As for connectivity, the Photo Printer 2 switches from 2.4G Wi-Fi, used on the 1S, to Bluetooth 5.2, allowing it to connect directly to a phone without needing a Wi-Fi network. Xiaomi says multiple users can still connect and print at the same time, with 8 filters available for quick edits.

On the software side, the new printer adds a handful of features not found on the 1S, including LUT-based color mixing tools, AR dynamic photos, and a smart ID photo mode. It also supports various textured lamination finishes, while the 1S is limited to a high-gloss coating only.

Physically, the Photo Printer 2 measures 199 x 126.6 x 85.7mm, slightly larger than the 1S at 194 x 124.6 x 83.6mm.

Alongside the printer, Xiaomi is also selling matching consumables, including 4-inch double-panel photo paper (79.2 yuan), 3-inch sticky photo paper (99 yuan), 6-inch photo paper (129 yuan), and a 6-inch 4-color professional edition paper set (159 yuan).

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

(Source)

The post Xiaomi Launches Mijia Desktop Photo Printer 2 with Bluetooth and 4-Color Printing appeared first on Gizmochina.