iQOO 15 Ultra vs Realme GT 8 Pro: Which One Is Actually Worth Your Money?

-

Mar 24, 2026

Vivo is getting ready to expand its X300 lineup, and alongside the Ultra, there’s another model that’s starting to look quite interesting. The Vivo X300s is set to launch alongside the Vivo X300 Ultra in China on March 30, 2026, and recent leaks have filled in most of the details.

The X300s is expected to feature a 6.78-inch flat display with a 1.5K+ resolution and a 144Hz refresh rate. It’s said to use BOE’s Q10+ panel, which should help with both brightness and efficiency. The overall design leans premium, with a metal frame and a large circular camera module on the back. It’s a familiar look at this point, but still stands out.

On the camera side, things are a bit unusual. The setup reportedly includes a 200MP main sensor, a 50MP ultrawide, and a 50MP periscope telephoto, all tuned with Zeiss optics. The front gets a 50MP camera. The main sensor resolution might look modest on paper compared to some rivals, but Vivo usually focuses more on tuning than just numbers.

Battery life could end up being a major highlight here. The X300s is tipped to pack a 7,100mAh battery, which would be the largest ever in the X-series. It supports 90W wired charging and 40W wireless charging, so topping it up shouldn’t take too long either.

There are a few extra touches as well, like an X-axis linear motor for better haptics, dual stereo speakers, and IP68 and IP69 ratings for dust and water resistance. You also get a 3D ultrasonic fingerprint sensor and USB 3.2 for faster data transfers.

The chipset hasn’t been officially confirmed in this particular leak, but earlier reports point to the Dimensity 9500. If that holds, performance shouldn’t be an issue.

With a flat display, big battery, and a flexible camera setup, the X300s looks like a more practical alternative to the Ultra. We’ll know the full picture once it goes official on March 30.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

(Source: DCS on Weibo)

Vivo X300 Ultra surfaces on Geekbench

By

-

Mar 24, 2026

Vivo’s next camera-focused flagship is almost here, and the X300 Ultra has now shown up on Geekbench ahead of its official launch. The phone is set to be unveiled on March 30, 2026, alongside the X300s, and this early benchmark listing gives a quick look at what to expect in terms of performance.

The device spotted on Geekbench carries the model number V2547DA, which is believed to be the satellite communication variant. It posted a single-core score of 3,722 and a multi-core score of 11,621. Those numbers are pretty much in line with what you’d expect from a top-end Android flagship this year.

Under the hood, the X300 Ultra is powered by Qualcomm’s Snapdragon 8 Elite Gen 5 chipset, paired with 16GB of RAM. The listing also confirms Android 16 out of the box, running Vivo’s OriginOS 6 skin on top. None of this is particularly surprising, but it does help lock in the core specs just before launch.

That said, performance isn’t really the main story here. Vivo is clearly putting most of its focus on the camera system, and it looks quite ambitious on paper. The phone is expected to feature a triple-camera setup led by a 200MP main sensor based on Sony’s Lytia 901. It has a 35mm focal length, which is slightly different from the usual smartphone approach, and comes with improved stabilization.

There’s also a 200MP periscope telephoto camera using Samsung’s HP0 sensor, paired with an 85mm focal length and upgraded stabilization again. On top of that, you get a 50MP ultrawide camera built around Sony’s Lytia 818 sensor.

Vivo is even planning optional teleconverter kits that extend zoom to 200mm and 400mm, which is something you don’t usually see in smartphones. It’s a bit niche, but it does show how far the company is pushing the photography angle.

On paper, the X300 Ultra looks like it could be one of the most camera-focused phones of the year.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

(Source: Geekbench)

Nothing phones eligible for Android 17 (Nothing OS 5.0) update: Here’s the complete list

By

Vicky

-

Mar 24, 2026

Nothing has been impressive with software rollouts so far. It was one of the first brands to conclude the Android 16 rollout, and now the company may already be working on the next major upgrade, based on Android 17. While most of the details are under wraps, we already know which Nothing phones are eligible for the Android 17 update.

The Android 17 update for Nothing phones will likely come with the Nothing OS 5.0 skin at the top, based on the company’s past naming scheme. Android 15 arrived with Nothing OS 3.0, and then Android 16 arrived last year with Nothing OS 4.0, so the next version, based on Android 17, is likely to come with Nothing OS 5.0.

Review the list of eligible devices for the Android 17 upgrade to see if yours is included.

Nothing Android 17 update: Eligible devices list

Nothing Phone (4a)
Nothing Phone (4a) Pro
Nothing Phone (3)
Nothing Phone (3a)
Nothing Phone (3a) Lite
Nothing Phone (3a) Pro
Nothing Phone (2a)
Nothing Phone (2a) Plus
Nothing CMF Phone 2 Pro

While this is still an unofficial list, it wouldn’t differ from the official one when announced. That’s because it’s based on the official software update policy. If your Nothing phone is on the list, it’s guaranteed to receive the Android 17 update when the rollout begins.

Also read: Android 17: Every new feature discovered so far

Only three phones are missing from the list: the original Nothing Phone (1), Nothing Phone (2), and the budget-friendly CMF Phone 1. They have already received the promised number of Android OS updates, and therefore have run out of OS updates.

If you’re still using an outdated Nothing phone, now might be the right time to upgrade to a newer model with longer software support. The Nothing Phone (4a) and Phone (4a) Pro have just been released, promising OS updates until Android 19. Or, you can get the flagship Phone (3) for an extra major upgrade.

While Nothing hasn’t revealed anything about Android 17 yet, Google has already released a few public betas, offering a sneak peek at the upcoming features and changes. You can check them out on this page. The stable version is expected to go live for Google Pixels in June, while other brands, including Nothing, will take additional time to fine-tune the software and add more features. For Nothing phones, we can expect the Android 17 rollout to kick off in Q4 2026.

We’ll keep an eye on the latest developments around Android 17 and post them in the Nothing section. You can visit the page regularly to get the latest updates. Or, join our Telegram channel to get notified whenever we post such stories.

Vivo V70 FE rumored to launch in India on April 2

By

-

Mar 24, 2026

The upcoming Vivo V70 FE is positioned as a mix of eye-catching design and solid mid-range specs. And from what the company has teased so far, the design might be the main talking point.

According to a report by 91Mobiles, the phone is set to launch in India on April 2, 2026. Vivo has already put up teasers and a microsite, highlighting features like a 200MP main camera with OIS. The device has also debuted in Indonesia recently, so there aren’t too many surprises left around the core specs.

One detail that stands out is the new Monsoon Blue color. On the surface, it looks like a simple matte blue finish. But under certain lighting and in darker conditions, the back panel reveals faint glowing streaks. Vivo is calling this effect “Darkness Glow.” It’s subtle from what we’ve seen so far, not overly flashy, but definitely different. There’s also another option called Northern Lights Purple, which leans more towards a soft gradient look. The phone itself sticks to a flat frame with a vertically aligned camera setup and Vivo’s Aura Light ring flash.

In terms of hardware, the V70 FE is powered by the Dimensity 7360-Turbo chip. It’s not aimed at heavy gaming, but should handle everyday use without much trouble. The display is a 6.83-inch AMOLED panel with 1.5K resolution and a 120Hz refresh rate. Battery life could be a strong point here, with a large 7,000mAh unit paired with 90W charging.

The camera setup includes a 200MP primary sensor and an 8MP ultrawide, while the front gets a 32MP camera. RAM and storage are expected to go up to 12GB and 512GB respectively.

The starting price is expected to be under Rs 35,000.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

Tecno Spark 50 5G teaser shows off a refreshed design

By

-

Mar 24, 2026

Tecno seems ready to update its budget lineup again. The company has shared a teaser for the Spark 50 5G on Instagram, giving a small preview of the phone while hinting that the launch isn’t too far away.

The teaser doesn’t show the full device, just a corner of the back, but it’s enough to suggest a design shift. The camera module appears to be laid out horizontally on a slightly raised platform. It’s a small change, but it does make the phone look a bit more refined than the earlier Spark models.

What stands out more, though, is the move to 5G. The Spark 40 series mostly stayed in the 4G space, using Helio G-series chips. Only the Tecno Spark Go, sold globally as the Spark 40 5G, offered faster connectivity with the Dimensity 6400 chip. With the Spark 50 5G, Tecno seems to be taking a more direct step into that space. For buyers in India and similar markets, where 5G is slowly becoming standard even in cheaper phones, that shift actually matters.

Some early details have already started floating around. The phone is expected to come with a fairly large battery, somewhere between 6,150mAh and 6,500mAh depending on the version. It should translate to solid, all-day usage.

Memory options are said to range from 4GB to 8GB RAM, with storage going up to 256GB. Nothing unusual there, but it does give buyers a bit of flexibility depending on budget.

The chipset is still unclear, which is probably the one missing piece right now. That will ultimately decide how well the phone handles everyday tasks.

For now, the Spark 50 5G looks like a straightforward upgrade over last year’s Spark 40 4G. Not a huge leap, but the kind of update that makes sense. The launch is expected around March 27, so we shouldn’t have to wait long for the full picture.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

HyperOS 3.1 global beta rollout begins for these Xiaomi devices

By

Vicky

-

Mar 24, 2026

Xiaomi is already rolling out the stable version of HyperOS 3.1 in China, and now the focus is shifting to the global market as the company has just begun rolling out the HyperOS 3.1 global beta for the initial batch of devices.

The initial Mi Pilot rollout of HyperOS 3.1 is currently restricted to the latest flagship smartphones, as reported by Xiaomi Time. Here’s the list of those devices and the firmware versions:

Xiaomi 17 Ultra (EEA): OS3.0.301.3.WPAEUXM
Xiaomi 17 (Global): OS3.0.300.7.WPCMIXM

The list is too short for now, as the global beta rollout has just gone live. However, it will keep getting bigger as Xiaomi pushes the beta to more devices over the coming days and weeks.

If your device is on the list and you belong to a beta-supported region, sign up to become a beta tester to get early access to the latest features and upgrades. We’ve included all the steps towards the end of the article.

Unlike HyperOS 3.0, there’s no Android 15 version of HyperOS 3.1. That means it’ll only reach Xiaomi, Redmi, and POCO devices that are already running Android 16. You can check the complete list of eligible devices and new features here.

How to sign up to become a HyperOS Mi Pilot tester?

Keep in mind that beta builds are prone to having bugs and unfinished features. Hence, it’s best to back up your important data before installing a beta build. The best route is to install them on a secondary device.

Step 1: Download the Mi Community app and create an account.

Step 2: Make sure the region is set to “Global”. To change the current region, tap ME in the bottom-right corner and go to Set up > Change region.

Step 3: Select the beta program available for your device and click the Apply button.

Step 4: Tap the Answer button and submit your responses. Aim for at least 60 points for greater chances of being selected for the beta program.

Step 5: Click Apply and then Apply again to submit your application.

Step 6: Wait for the approval (it may take up to seven days). Go to the Mi Community app > ME > Beta testing to check the status.

Step 7: Once your application is approved, go to Settings > About phone and tap the HyperOS version to check for updates.

To ensure you don’t miss out on the latest HyperOS stories, remember to visit the Xiaomi section on this website regularly. Alternatively, you can join us on Telegram to get instant notifications about the latest HyperOS updates, along with the biggest tech headlines.

Oppo Find X9 Ultra will support native 10x “optical” zoom, here are first camera samples

By

Rajesh Regmi

-

Mar 24, 2026

Oppo is gearing up to unveil the Find X9 Ultra next month, and the phone has already entered its pre-launch phase. As part of the buildup, the company has started sharing early details about its hardware.

The latest reveal focuses on the camera. Oppo confirmed today that the Find X9 Ultra will feature a new Hasselblad-branded 10x optical telephoto lens. The company describes the setup in unusually direct terms, comparing it to “putting a teleconverter inside a smartphone.

On paper, the system supports native 10x optical zoom, 20x “optical quality” zoom, and up to 120x digital zoom.

Zhuo Shijie, who leads the Find series, says this is a technical milestone. He says that while smartphone makers have steadily improved zoom over the years, fitting a true 10x optical system into a thin and light body hasn’t really been done before.

Oppo is crossing that line with Find X9 Ultra.

How Oppo is fitting a 10x optical zoom telephoto in Find X9 Ultra?

To make this possible, the company is using a new periscope design built around what it calls a five-reflection architecture. Oppo says this architecture helps achieve an equivalent focal length of 460mm, while still keeping the phone relatively slim.

There’s also a fair amount of engineering behind the scenes. Oppo says it developed a way to precisely cut the internal prism at a nanometer scale, creating an “ultra-high purity air aperture.” This lets cleaner light pass through while reducing stray light that can degrade image quality.

On the manufacturing side, Oppo is using something called Active Optical Alignment (AOA). This process dynamically adjusts the position of the lens and sensor during production, followed by multiple rounds of calibration. This way, each unit performs closer to lab conditions rather than varying from device to device.

Oppo-Find-X9-Ultra-10x-Camera-Sample — *Oppo Find X9 Ultra 10x camera sample vs competitors*

*Oppo Find X9 Ultra 10x camera sample vs competitors*

The camera system is paired with a custom 50-megapixel sensor and Oppo’s LUMO imaging engine. Together, they’re meant to handle high-resolution shots at long distances, while also improving dynamic range. The company also says it has tuned the microlens and color filters specifically for telephoto use.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

Galaxy Z Fold 8 specs summarized: combination of upgrades and refinement fans would appreciate

By

-

Mar 24, 2026

Samsung’s next book-style foldable is already starting to show up in leaks. A new tip from a known source on X gives us an early look at what Samsung might be planning for its 2026 foldable refresh.

If the timeline holds, the Galaxy Z Fold 8 is expected to launch around July 2026, roughly a year after the Fold 7. The device is said to feature an 8-inch inner folding display paired with a 6.5-inch cover screen, both supporting 120Hz refresh rates. Samsung is also reportedly working on improving durability this time.

The main screen could use a dual-layer ultra-thin glass design, along with a laser-drilled metal support plate underneath. In simple terms, that should help with strength and possibly reduce the visibility of the crease. The design itself might get some attention too. Early details suggest the Fold 8 will be thinner and lighter than before.

On the performance side, Samsung is tipped to use the Snapdragon 8 Elite Gen 5 for Galaxy chipset. Memory options could go up to 16GB RAM, with storage ranging from 256GB to 1TB. There’s also mention of a vapor chamber cooling system, something the Galaxy Z Fold 7 lacks. Paired with the new chipset, this should help improve sustained performance compared to the Fold 7.

Camera details are a bit mixed, but the latest leak points to a 200MP main sensor, backed by a 50MP ultrawide and a 10MP telephoto with 3x zoom. That setup sounds solid on paper, though it doesn’t fully line up with some earlier reports about a telephoto upgrade.

Battery life might see a noticeable boost. The Fold 8 is finally expected to move beyond the 4,400mAh mark and has also appeared in the 3C certification database, hinting at a charging upgrade.

Of course, these are still early leaks, so things can change. But if this direction holds, Samsung seems focused on refining the experience rather than reinventing it this year.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

OnePlus is working on a gaming handheld console with a different take on controls

By

Rajesh Regmi

-

Mar 24, 2026

While OnePlus is preparing to unveil the OnePlus 15T at an event today, a separate leak suggests the company may already be thinking beyond smartphones and into handheld gaming.

According to tipster Digital Chat Station, a major smartphone manufacturer is currently working on an “Android handheld console.” The leak doesn’t explicitly name the brand, but online discussions and context suggest OnePlus could be behind the project.

OnePlus’ rumored handheld console will be touchscreen first

What makes this rumored device interesting is how it reportedly rethinks the idea of a handheld console. Instead of relying on physical buttons, joysticks, or controller layouts, the rumored product is said to focus on a new kind of interaction system.

The device is said to be touchscreen first, in a way that improves multi-finger responsiveness, touch accuracy, and latency, especially for fast-paced first-person shooter (FPS) games.

AYANEO Air handheld console — Ayaneo Air

It’s certainly an innovative way of thinking about how a handheld can be built. Rather than simply attaching controls to a phone or building a console with Android, the device may try to merge the strengths of both.

The leak also mentions system-level optimization, flagship-grade performance tuning, and a high refresh rate display support for games like Delta Force and PUBG Mobile.

It’s worth noting that the related reports mention that, given the continued rise in storage costs, many manufacturers are trying to expand into new product lines to find growth opportunities. For example, Vivo is said to be working on a gimbal camera like the DJI Osmo Pocket.

Currently, details regarding the specific configuration and release date of this “Android handheld console” are under wraps. However, judging from its direction, this product may become an important attempt for mobile phone manufacturers to enter the gaming hardware field.

For more daily updates, please visit our News Section.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

Apple confirms WWDC 2026 dates, focus on iOS 27 and Apple Intelligence

By

-

Mar 24, 2026

Apple has officially confirmed the dates for its next Worldwide Developers Conference, or WWDC 2026, and it’s shaping up to be a packed week for software announcements. The company shared the details on March 23, setting expectations for updates across its entire ecosystem, with a strong focus on AI this time.

WWDC 2026 will run from Monday, June 8 to Friday, June 12. Like recent years, it will follow a hybrid format. Most of the event will be free to stream online, so developers anywhere can tune in without paying. Apple will also host a smaller in-person experience at Apple Park in Cupertino for selected developers and Swift Student Challenge winners.

The keynote, where all the big announcements happen, is scheduled for June 8 at 10:00 am PT, which is 10:30 pm IST. It will be streamed across Apple’s website, YouTube, and the Apple Developer app.

As expected, the spotlight is on software. Apple is preparing to unveil iOS 27, iPadOS 27, macOS 27, watchOS 27, tvOS 27, and visionOS 27. Alongside these, the company will host more than 100 sessions, labs, and developer-focused events throughout the week.

One of the biggest talking points is Apple Intelligence. Apple is expected to push deeper into on-device AI, with improvements to Siri being a key highlight. The assistant is rumored to become more context-aware and better integrated across apps. There are also reports suggesting Apple may lean on Google’s Gemini models to power some of these upgrades.

iOS 27 might not be about flashy changes. According to Bloomberg’s Mark Gurman, Apple is taking a more stability-focused approach this year. That likely means fewer visual changes and more effort on bug fixes and overall reliability.

So while there’s no new hardware expected, WWDC 2026 could still be important. If Apple gets the balance right, this might be the update cycle where things simply start working better again.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

(Source: Apple)

Galaxy S27 Ultra could skip AES-based S Pen upgrade after all

By

-

Mar 24, 2026

Samsung’s S Pen has been a core part of its flagship identity for well over a decade, especially on the Galaxy Ultra lineup. Previously, expectations were high that the Galaxy S27 Ultra might finally bring a major upgrade to the stylus. But if a new report is anything to go by, that upgrade isn’t happening just yet.

According to Korean outlet ETNews, Samsung had been testing a completely new S Pen technology for the S27 Ultra. However, the company has decided to hold it back for now. That means the phone is likely to stick with the same Electromagnetic Resonance (EMR) system it has used for years.

For context, EMR is what allows the S Pen to work without a battery. The phone’s display includes a dedicated digitizer layer that tracks the pen with impressive precision. However, this system relies on a magnetic field, which can be affected by built-in magnets or even magnetic accessories.

The alternative, Active Electrostatic (AES), takes a different approach. It removes the digitizer layer and instead relies on a battery-powered stylus interacting directly with the touchscreen, a method also used by Apple Pencil. Since AES doesn’t rely on magnetism for tracking, strong alignment magnets inside the phone should not significantly affect its performance.

This could finally allow Samsung to build magnets directly into the phone without interfering with S Pen functionality, something older Galaxy S flagships have struggled with when used alongside magnetic cases.

Interestingly, Samsung was reportedly working on a hybrid solution that aimed to combine both approaches. The idea was to remove the digitizer layer while still keeping the pen battery-free.

For now, it looks like Samsung is playing it safe. The S27 Ultra may not bring a big S Pen overhaul, but a more meaningful upgrade is clearly in the works, just not ready yet.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

Huawei Mate 80 Pro Max Wind Edition launched with built-in cooling fan and 1200 tiny ventilation holes

By

-

Mar 24, 2026

Huawei has introduced the Mate 80 Pro Max Wind Edition, a variant of its top-end model that adds active cooling into the mix. Instead of relying only on passive heat dissipation, this version includes a small built-in fan aimed at keeping performance stable during longer gaming sessions or heavy workloads.

The fan itself sits inside a redesigned camera module. The circular bump is larger than the standard version, and Huawei has added over 1200 tiny ventilation holes along the lower half. Inside, there are thermal bending fins that help guide airflow more efficiently. It’s not just a fixed-speed system either. The fan adjusts based on what you’re doing, spinning up during demanding tasks and easing off when things are lighter, so it doesn’t stay noisy all the time.

Apart from that, the phone is mostly familiar. You still get the same premium metal build, paired with second-gen Kunlun glass for durability. The display is a 6.9-inch dual-layer OLED with LTPO support, scaling from 1Hz to 120Hz, along with 144Hz PWM dimming and a 300Hz touch sampling rate. Peak brightness goes up to 8000 nits in HDR, which sounds excessive, but should help outdoors.

Under the hood, it runs on the Kirin 9030 Pro, tuned for HarmonyOS 6. Day-to-day performance should feel fast, and Huawei is also highlighting features like satellite messaging and improved network speeds.

There’s a 50MP main sensor with variable aperture, a 40MP ultra-wide, and a 50MP telephoto with macro support. On the front, a 13MP ultra-wide camera is paired with a 3D depth sensor.

The phone packs a 6000mAh battery with 100W charging, and it comes with 16GB RAM as standard. Pricing in China starts at 8499 yuan for the 512GB model and goes up to 9499 yuan for 1TB.

It’s a niche idea, but not a pointless one. If Huawei can keep thermals in check without adding too much bulk or noise, this could actually make a difference in sustained performance, which is where most phones still struggle a bit.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

For more daily updates, please visit our News Section.

(Image)

ASUS ExpertCenter PN55 Mini PC Announced with Ryzen AI 400 Series CPUs and 96GB RAM

By

Sudhanshu

-

Mar 24, 2026

ASUS has introduced the ExpertCenter PN55 Mini PC, a compact desktop focused on AI workloads and business use. It is positioned as a Copilot+ PC and runs on AMD’s Ryzen AI 400 Series processors with an XDNA 2 NPU delivering up to 55 AI TOPS.

The lineup includes multiple processor options. At the top is the Ryzen AI 9 HX 470 with a 45W cTDP. Other options include Ryzen AI 9 465, Ryzen AI 7 PRO 450, Ryzen AI 7 450, Ryzen AI 7 445, Ryzen AI 5 PRO 440, Ryzen AI 5 435, and Ryzen AI 5 430, most with a 40W cTDP. Graphics are integrated and vary by configuration. The Ryzen AI 9 HX 470 uses Radeon 890M, the Ryzen AI 9 465 uses Radeon 880M, the Ryzen AI 7 PRO 450 and Ryzen AI 7 450 use Radeon 860M, and the remaining models use Radeon 840M graphics.

The system supports up to 96GB of DDR5 memory through two SO-DIMM slots running at 5600MHz, with configurations starting at 8GB, 16GB, or 32GB. Storage is handled by two M.2 2280 PCIe Gen4x4 slots, supporting NVMe SSDs from 256GB to 2TB. ASUS will also offer a kit version without pre-installed memory or storage.

ASUS is focusing on AI-assisted features supported by the NPU and CPU. These include live captions for multilingual meetings, AI-based image and content generation, and system-level recall for searching previously accessed files. A Copilot key and voice command support are included for interacting with these features.

Connectivity includes Wi-Fi 7 with the MT7925 module or Wi-Fi 6E with the MT7922 module, along with Bluetooth 5.4. Wired networking is handled by dual 2.5G LAN ports using the RTL8125BG controller. The system can drive up to four 4K displays through HDMI 2.1, two DisplayPort 1.4 outputs, and USB4 with DisplayPort 2.1 support and 40Gbps bandwidth.

Port selection is spread across the chassis. The front includes a power button, one USB 3.2 Gen2 Type-C port at 10Gbps, two USB 3.2 Gen2 Type-A ports at 10Gbps, and a 3.5mm audio jack. The rear includes one USB4 port with 100W power delivery input, one USB 3.2 Gen2 Type-A port, one USB 2.0 Type-A port, HDMI 2.1, two DisplayPort 1.4 ports, two 2.5G LAN ports, and a DC-in connector. A Kensington lock slot is placed on the side.

Security features include a fingerprint sensor on the chassis and support for fTPM 2.0 or an onboard TPM module. Select models also include AMD PRO technologies for hardware-level security and remote management.

The PN55 uses an aluminum chassis with a tool-less design for easy upgrades. It measures 130 x 130 x 34mm and weighs 530g. It also supports VESA mounting for fixed installations.

ASUS says the system meets MIL-STD-810H durability standards and is designed for continuous use in office setups, digital signage, and general workstation tasks.

MAINGEAR Unveils Crimson Desert Gaming PC with Ryzen 9 9850X3D, Limited to 30 Units

By

Sudhanshu

-

Mar 23, 2026

MAINGEAR has announced a limited-run desktop tied to the release of Crimson Desert, the upcoming open-world title from Pearl Abyss. The system, called the Rush Crimson Desert Limited Edition PC, will be produced in 30 units. Orders will remain open until April 2 or until all units are sold.

The PC is built around MAINGEAR’s RUSH mid-tower chassis, which features custom artwork based on the game’s setting and characters, including Kliff and the Greymanes. The design reflects the visual style of the game’s world, Pywel.

In terms of hardware, the system uses AMD’s Ryzen 9 9850X3D processor along with a Sapphire Nitro+ edition Radeon RX 9070 XT graphics card. The GPU carries a custom design created for this collaboration. The configuration targets high-end gaming workloads such as large environments, dynamic lighting, and heavy combat scenes.

The rest of the specifications include 64GB of DDR5 memory at 6000MT/s in a 2x32GB setup and a 2TB T-Force A440 Gen4 M.2 NVMe SSD. The system is built on an ASRock Phantom Gaming X870E Nova WiFi motherboard and uses an MSI 850W power supply.

Cooling is handled by a 360mm AIO liquid cooler from MAINGEAR, supported by three 120mm RGB intake fans. The system also includes Wi-Fi 7 support and ships with Windows 11 Home pre-installed.

MAINGEAR says each unit is assembled by a single technician at its facility in Warren, New Jersey, and undergoes thermal and stability testing before shipping. The system also includes a Crimson Desert Deluxe Edition game code.

The Rush Crimson Desert Limited Edition PC is priced at $4,499 and will be available exclusively through MAINGEAR’s website. Only 30 units are planned, with no additional production expected after the initial batch sells out.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories!

Edifier launches Hecate G3 Max gaming headset with THX Spatial Audio & 227h battery

By

-

Mar 23, 2026

Edifier has launched the Hecate G3 Max, a wireless over-ear gaming headset priced at 299 yuan (approximately $43). The headset focuses on delivering high-quality audio, ergonomic comfort, and versatile connectivity options. It is available in black, white, green, and pink color options.

Edifier Hecate G3 Max Specifications

The Hecate G3 Max headset is designed for gaming with THX Spatial Audio, providing immersive 360-degree sound and enhanced directional accuracy. It is Hi-Res Audio certified with a frequency range of 20Hz to 40kHz and features a 53mm driver and PEN diaphragm for clear, low-distortion audio, fast response, and superior sound separation.

Edifier partnered with professional esports teams to fine-tune the audio, enhancing clarity of footsteps, balancing gunfire sounds, and improving positional accuracy in FPS games. The headset features a 3D pivot ergonomic design for multi-angle adjustments and weighs 280 grams. It uses hydrolysis-resistant leather and high-elastic foam for comfort, with ear cushions and a headband that evenly distribute pressure, making it suitable for glasses wearers.

The G3 Max includes a detachable noise-canceling microphone with AI algorithms to reduce background noise. The microphone provides a signal-to-noise ratio of 65dB for clear voice communication.

The headset supports 2.4GHz wireless, Bluetooth 6.0, and wired USB connections, with Flash Speed wireless technology for stable, low-latency performance. It is compatible with PCs, laptops, smartphones, tablets, and gaming consoles like the PS5 and Nintendo Switch.

The G3 Max offers a 2000mAh battery with up to 227 hours of playback in Bluetooth mode and 137 hours in 2.4GHz mode, supporting charging during use. It also includes customizable RGB lighting and a companion app for adjusting sound and lighting settings.

In related news, QCY has recently launched the VT200 gaming headset featuring 53mm drivers, 7.1 surround sound, and up to 130 hours of battery life.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 💡

(JD)

HP launches Star Studio Pro 27 AIO PC with Intel Core 5 210H, 27″ 120Hz FHD display & 16GB DDR5 RAM

By

-

Mar 23, 2026

HP has launched the Star Studio Pro 27 All-in-One desktop in China, targeting the mid-range market. It is priced at 5,299 yuan ($770) and is now available on JD.com.

HP Star Studio Pro 27 Specifications

The Star Studio Pro 27 is powered by an Intel Core 5 210H processor. The processor uses a hybrid architecture that includes 4 performance cores and 4 efficiency cores, providing a total of 8 cores and 12 threads. It reaches a maximum turbo frequency of 4.8GHz and supports a performance release of up to 60W.

HP has equipped the system with 16GB of DDR5 memory running at 5200MT/s. The device offers an additional slot for future upgrades. For storage, the Star Studio Pro 27 comes with a 1TB PCIe 4.0 SSD.

The system features a 27-inch Full HD IPS display with a 120Hz refresh rate, 100% sRGB color gamut coverage, and 350 nits peak brightness. It includes TÜV Rheinland low blue light certification to reduce eye strain and has a three-sided narrow bezel design with a 94% screen-to-body ratio.

The Star Studio Pro 27 features a fully adjustable stand with 100mm height adjustment and tilt adjustments from -6° to 16°. It also includes a rear cable management system for a tidy workspace.

HP provides a wide range of connectivity options, including two 20Gbps USB-C ports, one 10Gbps USB-A port, two standard USB-A ports, an HDMI 2.0b output, a Gigabit Ethernet port, and a 3.5mm audio jack. The device supports Wi-Fi 6 and Bluetooth 5.4 for wireless connectivity.

The desktop features dual 3W speakers tuned with Poly audio technology for better sound quality. It includes a Full HD IR camera with facial recognition login and a physical privacy shutter for added security. HP also bundles a wireless keyboard and mouse set with the system.

In related news, Acer has recently launched the Predator Orion 7000, featuring an Ultra 9 285K CPU and RTX 5080 GPU.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 💡

(JD)

JMGO launches N1 Air 4th Gen 1080p projector with Dolby Audio & Xiaomi smart home integration

By

-

Mar 23, 2026

JMGO has launched the N1 Air 4th Gen projector, now available for pre-order on JD.com. The projector features the latest QuaLas 32 laser light source and supports integration with Xiaomi’s Mijia smart home ecosystem. JMGO has priced the projector at 3058 yuan (approximately $444).

JMGO N1 Air 4th Gen Specifications

The N1 Air 4th Gen projector uses a MALC eye-care pure triple-color laser light source, paired with the QuaLas 32 laser system. It delivers a CVIA-rated brightness of 1350 lumens and achieves a FOFO contrast ratio of 15,000:1.

The projector supports HDR10 decoding and covers 110% of the BT.2020 color gamut, which produces vibrant colors and deeper contrast. It offers a native resolution of 1920 x 1080 (1080p) and includes MEMC motion compensation for smooth playback during high-speed scenes.

JMGO has equipped the projector with an integrated smart gimbal design. This allows users to adjust projection angles easily, including ceiling projection. The system features real-time automatic keystone correction and autofocus, ensuring precise alignment and sharp visuals without manual adjustments. The projector also includes a large-screen mode to expand the image size for more immersive viewing.

The audio setup includes dual 5W speakers with Dolby Audio certification and DTS-X decoding. The speakers provide a balanced sound profile with bass frequencies reaching as low as 55Hz.

The projector runs on Bonfire OS 7 and supports Xiaomi HyperConnect for smart home integration through the Mijia app. It also includes Super XiaoAI voice control for hands-free operation. The system integrates DeepSeek and iFlytek Spark AI models, enabling voice search, content recommendations, and intelligent interaction. JMGO has equipped the device with 2GB of RAM and 64GB of internal storage for apps and media.

The N1 Air includes Wi-Fi 6 and Bluetooth for wireless connectivity. It features one HDMI 2.1 port, one USB 2.0 port, DC input, and infrared support. The projector uses a flagship MT9 chipset and operates at a low noise level of 26dB. It consumes 100W of power and measures 187 x 165 x 191 mm, with a weight of 1.8 kg.

In related news, we recently covered the best home theater projectors of 2026. Do check it out as well.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 💡

(JD)

Xiaomi launches affordable 6.5L smart air fryer with steam, bake and fry modes

By

-

Mar 23, 2026

Xiaomi has introduced the Mijia Smart Air Fryer Pro Steam & Bake Edition 6.5L on its Youpin platform. The new appliance is priced at 559 yuan ($80) and aims to combine convenience, versatility, and smart functionality for home cooking.

Xiaomi Mijia Smart Air Fryer Pro Specs

The air fryer features a large 6.5-liter capacity, which allows it to handle family-sized meals in one go. Xiaomi designed it with a dual-layer rack, enabling users to cook multiple dishes simultaneously. The horizontal interior measures 234mm, making it spacious enough to accommodate a whole chicken, 24 chicken wings, 800 grams of fries, or nine steamed buns.

Xiaomi used a 304 stainless steel inner cavity for better durability and hygiene. The cooking basket has a fluorine-free non-stick coating, which simplifies cleaning and ensures safe cooking. The appliance includes a 1.5-liter water tank, allowing for extended steaming sessions and the ability to cook up to seven dishes continuously without refilling.

The device includes a 900W steam generator reaching 130°C for 30% faster cooking than traditional steamers. It offers 11 cooking modes, such as steam, steam-fry, and low-temperature cooking, along with 31 preset recipes and over 100 cloud-based recipes through the Mi Home app.

The air fryer features precise temperature control (30°C to 230°C) and a 360-degree hot air system with dynamic steam injection for crispy, moist results. It can be operated using a rotary knob or the Mi Home app, supports HyperOS Connect, and integrates with XiaoAI voice assistants.

Xiaomi added features like a visible cooking window, automatic power-off when the basket is removed, a drying mode, a deodorization function, and a 30-minute keep-warm option.

In related news, Xiaomi has recently launched the Mijia Mite Remover 3 Pro with 17,000Pa suction, a 1.7kg cordless design, and UV sterilization, and also introduced a new purple variant of the Mijia Colorful Suitcase.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories! 💡

(Xiaomi Youpin)

Honor 600 Pro looks like an iPhone 17 Pro clone in renders

By

Rajesh Regmi

-

Mar 23, 2026

If you’ve ever liked the look of an iPhone but hesitated at the price, Honor seems ready with an alternative. Images of the upcoming Honor 600 and Honor 600 Pro have just surfaced online, and yes, they look more like iPhones than Honor phones.

The back panel features a full-width horizontal bar that houses the camera system, LED flash, and laser autofocus. Like an iPhone 17 Pro. Its color options are also said to include black, gold, and an orange finish. Like an iPhone 17 Pro.

Honor 600 / 600 Pro Expected Specifications

On the front, both devices are expected to feature a 6.57-inch OLED display with a 120Hz refresh rate and a 1.5K resolution.

Under the hood, things are still a bit unclear. Reports suggest the phones will use a high-end Qualcomm Snapdragon 8 series chipset, though it’s not confirmed whether that means last year’s flagship silicon or a newer, slightly toned-down “s” variant.

As for cameras, Honor is reportedly using a 200-megapixel main sensor with built-in hardware image stabilization. The Pro model is expected to expand on that with additional ultrawide and zoom cameras.

More impressively, Honor is expected to use a silicon-based battery with a massive 9000mAh capacity. The Honor 500 and Honor 500 Pro, in comparison, has 8000mAh cell with 80W charging.

Both models are also expected to feature a metal frame and glass panels. Other reported features include wireless charging support and a 3D ultrasonic fingerprint sensor. The ultrasonic scanner, in particular, would be a step up from the optical in-display sensor on the Honor 500.

There’s still no official word on when the Honor 600 series will launch or how much it will cost. We will keep you updated if any new information emerges.

For more daily updates, please visit our News Section.

Stay ahead in tech! Join our Telegram community and sign up for our daily newsletter of top stories.