Advertisement

eufy Smart Lock Review: Video Doorbell & Smart Lock

Carrying a physical key could be bothersome for some people. You have to pay attention not to lose it. And if it gets lost, you wouldn’t be able to get into the house. Even if you are careful enough to keep it safe, your children may not think so. After all, one more key is one more hidden danger. To eliminate keys, you need a Lock that has a superfast fingerprint unlock, or that can unlock from the most personal device, your smartphone. It would be even better if it has a surveillance camera, preferably with 2k resolution. Then it should also act as a smart doorbell and allow you to check the situation anywhere and anytime. Finally, the most important thing is that all this service shouldn’t charge you anything for local storage used. Fortunately, we have found a Smart Lock that meets all the criteria, Video Smart Lock, from Eufy.

This is the box of the Video Smart Lock, a square box. eufy smart lock Review 26The back of the package contains various details about the Smart Lock’s features, which we’ll talk about later. Let’s open the box.

eufy smart lock Review 25What you see is the Smart Lock body, one is the Smart Lock Interior Assembly installed inside the door. The other part installed outside your door is the Smart Lock Exterior Assembly. We’ll put them aside for now, and the layer below is a variety of accessories. It’s a plug that, when combined with the white device, makes up a chime that can act as a smart hub for your all eufy devices.

eufy smart lock Review 24 In addition, it is also a speaker. You are allowed to switch Alarm Tones with pretty loud volume. If someone uses Video Smart Lock’s doorbell, it will make a sound to alert you that you have a visitor.

The smart lock has a Type-C charging port on it, so you don’t need a special charger to charge it. There are also some screws and even a pair of keys. You know, even the most advanced Smart Lock must have a key, in case the digital unlock fails to work, and you cannot get out of the house.

Well, we received the version that is not officially released, so there is no manual. So, the question is, how do we install the Smart Lock without relying on the manual. After all, we have never installed a smart lock like this!

eufy smart lock Review 20

I first powered up the Smart Lock Exterior Assembly, and it will tell you that you need to activate the device with an APP. I then installed the APP called eufySecurity on my phone, you can find it on Google Play or the APP Store. Register your account after installation. Then add the device and select Video Smart Lock. It told me to activate the Chime first, so I had to follow the instructions to activate the Chime. And once that was done, you could add the Video Smart Lock to your phone. The process of activation is very simple, basically, it’s just to get the Smart Lock connected to a Wi-Fi network. And thanks to the added camera, you can quickly pair it by scanning the QR code. It doesn’t let you set a password that is too simple. There will be a pairing video that will teach you how to install the Smart Lock.

eufy smart lock Review 21

There are only two things that are more difficult in the installation process. One is to make sure there’s enough space for leaving a hole in the door. Another is to plug the two wires into the Smart Lock interior because you need to put a lot of effort to plug in. Finally, plug the fully charged battery in and unplug the power supply cable. Then the installation is complete. Even though there’s no manual for guidance right now, I was still able to install it smoothly, which means that eufy’s installation guidelines do a good job. Of course, if you buy it commercially, there will be paper instructions in the box, so don’t worry.

eufy smart lock Review 29

Now we can take a closer look at the details of Smart Lock. Let’s start by looking at the Exterior Assembly. At the top is fingerprint recognition, which can recognize your fingerprint in as fast as 0.3 seconds. Compared to the optical fingerprint recognition used on some phones, the capacitive fingerprint recognition sensor of this Video Smart Lock is definitely a more secure option. Underneath it is the main selling point of the eufy Video Smart Lock: the 2K camera. Not only does it have a high resolution of 2560*1920, but it also turns on the IR LED below the camera when the environment is dark, making the picture look even clearer. For saving power, there’s a special mode of object detection that only allows the camera to work while detecting any moving object.

eufy smart lock Review 11 You will be able to see who is visiting your door whenever and wherever you are. If you have too much footage of people passing by your house, eufy offers you a cheap solution.

eufy smart lock Review 10Do you see the Micro SD Card slot next to the Chime? You can use as much space as you want, and no need to pay any monthly fee for the footage. In that case, you will be a nightmare for those couriers who throw your deliveries around. This doorbell is linked to the camera. When an object’s motion is detected by the camera, the doorbell will only light up and prompt the person to press it. Of course, this Video Smart Lock could also be unlocked with a password. On the bottom is the power port, speaker, and reset button, which is similar to most Smart Lock.

eufy smart lock Review 09

Smart Lock Interior Assembly is very simple in appearance, with only a lock knob. Remove the top panel, inside is the battery and a pairing button. That’s all there is to the Smart Lock Assembly. You will notice that it does not have a handle. Yes, it is positioned to be used with the original door lock in your house. The lack of a handle and the no arc lock cylinder means that it can hardly be the only lock on your door because it is not convenient enough to use. Of course, if you don’t think it would be a hassle to be the only lock on your door, there’s no problem at all.

eufy smart lock Review 08

Smart Lock must have a variety of functions to be called “Smart”. In addition to the above-mentioned fingerprint, password unlocking method, you can even unlock the door remotely through the phone. Maybe your friends or parents like to visit your home often without notifying you. When you are not at home, you can find out who is standing in front of the door through the camera, and then open the door for them. Entrance and Exit Notification would alert you when a door had been opened or closed. This feature is very friendly for users with children.eufy smart lock Review 05 Scramble Passcode is also a standard feature of Smart Lock to prevent others from remembering your unlock code, and Activity Zone allows you to reduce the probability of recognizing ordinary passersby. This feature is especially useful if you don’t want to buy a large-capacity SD card. It is also able to link with Google Assistant, Alexa, and other eufy devices, but we don’t have the relevant devices, so we won’t show you here. The rest are some common features shared with other Smart Lock.

eufy smart lock Review 27

For you who want to say goodbye to keys, eufy Video Smart Lock is an excellent product. Simply speaking, it is a product that combines Smart Doorbell and Smart Lock. It has almost all the important features and works as advertised. So, users who like multifunctional products should not miss this product.

 

Moto E32 bags multiple certifications confirming its wide presence

While Motorola has recently launched the Moto G22 smartphone under its budget-centric G-series, the company is yet to bring any device under its entry-level E-series this year. MySmartPrice has now spotted an upcoming E-series phone dubbed Moto E32 and it has bagged multiple certifications hinting at its forthcoming launch.

The Motorola Moto E32 has appeared on FCC, EEC, Wi-Fi alliance, and NBTC certifications. The device carries four model numbers — XT2227-1, XT2227 – 2, XT2227 – 3, XT2227 – 4. These models are expected to be some of the variants of the smartphone.

Moto E32

The XT2227-1 and XT2227-3 were spotted under the Motorola branding, while the XT2227-4 has been trademarked under the Lenovo branding. There’s also another model with the model number XT2203 – 1 spotted on EEC, but there are no details about it at the moment.

Moto E32

The FCC certification for the XT2227-1 confirms that it will be a 4G smartphone and support a dual-SIM slot. It will have Bluetooth and WiFi support with a 2.4Ghz network. The Moto E32 will have a 5,000mAh battery with a 10W charging adapter. The charging adapter is listed with country codes of the US, UK, India, Australia, European nations, Chile, and other regions. It confirms that the phone will have a wide presence in the market.

As of now, there are no details regarding its launch date or specs. But considering that it has passed several certifications, we can expect a sooner release.

RELATED:

Motorola Edge X30 Under Screen Edition confirmed to launch on March 17, will have 60MP front camera

Motorola had only a few days back confirmed a March 17th launch event. Now, the company with a Weibo post revealed that the launch event will lift the curtains on two devices, one of which will be the Motorola Edge X30 Under Screen Edition.

The other device is expected to be a special edition of the Edge X30 series and is expected to be very similar in terms of specifications to the Edge X30 Under Screen Edition. IT Home speculates that this second offering will be a “Champion Edition” that will sponsor some F1 team.

motorola edge x30 under screen launch teaser

The under-screen version of the Motorola Edge X30 will be a flagship device and is equipped with the Snapdragon 8 Gen 1 processor, supported by up to 12GB of RAM. Also, just like its name implies, it will come with an under-screen front camera.

A new teaser from earlier today had revealed that the Motorola Edge X30 Under Screen Edition will feature up to 512GB of internal storage, which is much double the 256GB maximum on the standard Edge X30.

The Under Screen Edition also comes with a 6.7-inch OLED Full-HD+ display with a 144Hz refresh rate and a 576Hz touch sampling rate. It will offer a 100 percent DCI P3 color gamut, HDR10+, and an in-display fingerprint sensor.

The device’s front camera is quite impressive too and comes with a super dense 60MP sensor, which might as well be leading among the most recent flagship phone launches.

RELATED:

Tronsmart Bang Bluetooth speaker with 60W audio output & RGB lighting launched

The Tronsmart Bang has just been launched. It is a new portable speaker from the company that features Bluetooth connectivity, and offers RGB lighting as well as a top mounted handle.

Tronsmart

Talking about the product itself, it features dual woofers, tweeters, and passive radiators for a combined audio output of up to 60W. As per the official claims, the speaker should be the perfect pair for parties. Furthermore, it even sports customizable LED lighting as well that can sync up with the music being played. Its app also includes an EQ that can be adjusted as well, and offers multiple presets like Classical, 3D and others.

The company claims that the Tronsmart Bang can last for up to 15 hours in a single full charge. It can even be charged to full in four hours through its USB Type C port. The USB port can also connect to other devices to share its power. Meaning, it also acts as a power bank through its large 10,800mAh battery pack. For connectivity, it also supports Bluetooth 5.0 and NFC as well.

Tronsmart

Tronsmart claims that its in built TuneConn tech can allow up to 100 units of the Bang to connect at once for a synced multi speaker experience. As of right now, the new portable Bluetooth speaker is listed on the company’s official website for 109 US Dollars. It will also be launched through Amazon.com sometime in April 2022.

RELATED:

 

Realme Pad Mini has entered mass production and will launch in Europe, says tipster

The Realme Pad Mini has been making rounds on the Internet lately. The tablet was last spotted on the FCC database revealing its key details. Now, the tipster Mukul Sharma has shed some on its global release.

According to the tipster, the Realme Pad Mini will launch in the European markets soon. He further reveals that the tablet has just entered mass production. To recall, the tablet was earlier tipped to debut in India. Now that it is said to debut in the European markets, we are expected to get launch details in the coming days. As far as India is concerned, the tablet will debut in the region this month itself.

Coming to the specs, The Realme Pad mini was spotted on a few certification sites with the model number RMP2105. It packs a big 6,400mAh battery and has an 18W fast charging support. If we compare it with the Realme Pad’s 7,100mAh cell, then this battery capacity is slightly lower. However, it is worth noting that it also has the same 18W fast charging support.

Realme Pad Mini leaked render 2
Realme Pad Mini leaked render by Steve Hemmerstoffer / SmartPrix

Apart from the battery, the Realme Pad Mini is rumored to come with an 8.7-inch TFT or LCD panel. It is said to have an 8MP rear camera and a 5MP selfie camera. It is expected to be powered by the UNISOC T616 SoC paired with 4GB of RAM and 64GB of internal storage. The smartphone is expected to run on Android 11 OS out of the box with Realme UI on top of it.

RELATED:

Android 12L reportedly fixes Widevine issues on Pixel devices

Following months of beta testing, Android 12L is finally here with numerous features and optimizations designed to make tablet usage better than before. But among these additions, there’s also seems to be a fix for a long-standing Widevine certification bug troubling Pixel owners for a while.

Multiple Redditors on the Google Pixel subreddit acknowledged that the March update fixed the Widevine issues that prevented HD streaming on OTT platforms like Netflix, Disney+, and Amazon Prime for them (via Android Police).

google pixel 3 series featured

For those unaware, users have been complaining about the Widevine on their Pixel devices downgrading from L1 to L3 for over a year now. When L1, streaming services are allowed to play content on 1080p, but when downgraded to L3, the max you get is 480p. Therefore, in order for a device to stream at 1080p, L1 certification is a necessity. The whole system has been put in place to prevent piracy.

When the Widevine issue first hit, Google acknowledged it saying they were working on a fix. But the fix never really rolled out, leaving Pixel owners stuck with an ugly 480p streaming resolution — something that now appears to be changing with the Android 12L update.

Still, there are some who continue to see Widevine L3 even after updating Android 12L. For such users, it is recommended to factory reset the device once. While this isn’t a guaranteed fix, a few users have reported that doing so did the trick for them.

RELATED:

Yamaha may launch a new electric scooter in India on April 11

Yamaha has recently registered the name E01 and the EC-05. The latter is an electric scooter that was already on sale in Taiwan. Now, it seems that the company is gearing up to launch a new electric scooter in India soon.

Yamaha

According to a Rushlane report, the Japanese automobile maker’s first Indian market could be a max styled scooter. This will be a premium product and will probably rival the likes of the Ather 450X and Bajaj Chetak. The report adds that the scooter will be equipped with a full digital LCD panel console. It will also feature Bluetooth connectivity and users will even be able to access a range of features and functions via Yamaha’s smartphone application.

As of right now, information regarding this upcoming electric scooter is still at large. Although, it is expected to offer performance that matches a 110cc petrol scooter like the Honda Activa and TVS Jupiter. Furthermore, its range may be around 70 to 80 kilometers, with a top speed of 80 and 100 kmph. It is also expected to offer multiple ride modes, which determines speed and range. Other rumored features include, LED headlight, alloys at front and rear, trendy rear view mirrors and comfy single piece seat.

Yamaha NEO electric scooter

With electric vehicles becoming more popular in the automobile industry, it arrives as no surprise that Yamaha also plans on launching a new electric scooter. The scooter segment is popular in India, so the company might also offer multiple ownership options. One of these options will include a subscription based plan that will be backed by battery swapping infrastructure. So stay tuned as we will be providing more updates.

RELATED:

 

realme GT NEO3 will be a ‘fashionable gaming smartphone’ — Official

Recently, realme confirmed to debut the realme GT NEO3 this month (March). The brand is yet to officially disclose the exact launch yet. Ahead of that, it has started promoting the device on Weibo. One of the company executives today issued a letter containing some interesting data.

Realme GT Neo3 new poster
realme GT NEO3

According to a letter by Xu Qi, the number of users of the realme GT NEO series smartphones crossed 2 million within a year from the release of the first phone in the lineup. For the unaware, the original realme GT NEO was unveiled on March 31, 20201, and went on sale on April 8 for the first time.

Further, the executive reveals that more than half of realme users are gaming enthusiasts. Therefore, the realme GT NEO series will now be marketed as ‘fashionable gaming smartphones’. The company has even announced a partnership with the Honor of Kings National Competition.

The last-gen realme GT NEO2 not only offers great performance but also a striking design. This formula seems to be popular among consumers, and therefore, the brand may have decided to stick with this approach.

According to previous reports, the upcoming realme GT NEO3 will arrive with a 6.7-inch 10-bit 120Hz OLED display, MediaTek Dimensity 8100 SoC, a 50MP Sony IMX766 primary sensor with OIS, an 8MP ultra-wide unit, a 2MP macro shooter, a 16MP front-facing snapper, realme UI 3.0 based on Android 12, 4,500mAh battery, and 150W UltraDart fast charging support.

We expect to learn more about the handset officially via teasers in the coming days.

 

 

RELATED:

 

Vivo X Fold reportedly spotted in the subway in China

Earlier today (14th March 2022), a mysterious foldable smartphone was spotted in China. This device could be the Vivo X Fold, which is the company’s first foldable smartphone that is highly anticipated in the market.

Vivo

The image was shared on Weibo (Via ITHome) and showcased the smartphone from the front. While it is still unclear which model this foldable phone actually is, it is believe to be the Vivo X Fold. Looking at the image, we can see that it has a thick case, which is likely to prevent anyone from spotting its actual design. Although, the display is in full view and does not appear to have any form of crease on the front.

In a previous report, we had covered the schematics that were revealed of the Chinese brand’s foldable handset. It showed that its cover display will have a curved edge and a center aligned punch hole. The rear side of the device has a circular module placed inside a rectangle block. This module houses the LED flash and a quad camera setup. An unknown key, a volume rocker, and a power button are available around the sides of the X Fold.

Vivo X Fold schematic
Vivo X Fold schematic by Digital Chat Station

As per recent rumors, the Vivo X Fold will sport a 6.5 inch FHD+ OLED display with a 120Hz refresh rate on the front. Furthermore, the internal display will be an 8 inch panel with QHD+ resolution and a 120Hz refresh rate. The device will reportedly be powered by the Qualcomm Snapdragon 8 Gen 1 SoC. It is also expected to be powered by a 4,600mAh battery pack that supports 80W fast charging. Keep in mind that these are still speculations, so take it with a pinch of salt and stick around for more updates.

RELATED:

 

BOE continued to dominate Chinese AMOLED panel production in 2021

Chinese AMOLED display-producing factories had an annual average utilization rate of 53.7% in 2021, which is a 10% increase compared to 2020.

Among them, the utilization rate improved the most for TCL CSOT, from 32.7% annual utilization in 2020 to an impressive 74% in 2021, the latest report from CINNO Research shows (via IT Home).

However, it is BOE that continues to be the manufacturer with the largest production area among AMOLED panel factories in China, with a market share of 37.4% in 2021. This share is down 7.6% compared to 2020, though.

china amoled display market share boe & others
Via CINNO Research

BOE is followed by Visionox, with an 18.3% share in 2021, which is an increase of 1% when compared to 2020. Standing third is Hehui Optoelectronics EDO whose share in 2021 stood 15.6% — a decrease of 1.8% from 2020.

The data also shows that the overall installed capacity area of ​​domestic AMOLED panel factories rose by 26.9% in 2021, while the production area increased significantly by 57.0%.

BOE has currently locked horns with Samsung, with the former trying to secure more orders for the latest iPhones. A new report suggests that BOE will supply Apple with OLED LTPO displays for its higher-end iPhones in 2023. But presently, the company is having to put up with the global chip shortage resulting in significant production cuts.

RELATED:

Apple supplier pauses iPhone production in China due to COVID lockdown

Foxconn, one of the primary Apple suppliers, has apparently paused its operations in China. The company has halted iPhone production due to the ongoing lockdown caused by a new wave of Coronavirus outbreak.

Apple

According to a Bloomberg report, Foxconn had to halt its operations in the region because of the recent lockdowns. Although, the company has managed to relocate production to other sites that are still operating at the moment, to offset the impact of the lockdown on its production. The lockdown is expected to be in effect till March 20 and was initially started by the Chinese government after more than 3,000 cases of COVID-19 were reported on Sunday (13th March 2022).

So now, the local government put the 17.5 million residents of Shenzhen, China into lockdown. Various forms of public transport like buses and subway systems have been closed and business are only allowed to operate for providing essential services. While Foxconn’s production takes a hit, Apple would also face the impact of the lockdown, alongside other tech firms that rely on its facilities to manufacture their products.

Apple

Although the report also points at the demand for products being low since the season follows right after the peak holiday season, Apple had just launched a number of new products recently. This includes the iPhone SE (2022), fifth gen iPad Air, and Mac Studio. So, early buyers might face delays in shipments over the ongoing lockdown in China.

RELATED:

 

RedmiBook Pro 2022 launch date revealed, will be a thin & light performance-oriented lappy

A new iteration of the RedmiBook Pro is all set to debut on March 17th, 2022 alongside the Redmi K50 series, according to the Xiaomi Notebook official Weibo account.

The official poster for the launch says that the RedmiBook Pro 2022 will “challenge the peak performance of thin and light notebooks.” From this, it’s easy to ascertain that the laptop will focus greatly on performance.

redmibook pro 2022 launch

Previous leaks had shown that at least one of the variants of the RedmiBook Pro will be equipped with the high-end 12th Gen Core i7-12650H processor. This one managed to score 1,800 and 11,872 in the single-core and multi-core tests, respectively, which is a significant improvement over the previous generation.

The i7-12650H has a basic power consumption of 45W, and comprises 6 large cores and 4 small cores clocked up to 4.7GHz, 16 threads, and 24MB L3 cache.

In addition, according to Redmi GM Lu Weibing’s comments under the same post, the new product will use updated tech to greatly improve heat dissipation.

Along with the RedmiBook Pro 2022 models and the Redmi K50 series, the March 17 launch event has also been teased to lift the curtains on new Redmi TVs and routers. Weibing had earlier stated that the launch will be one of Redmi’s most important ones for the year and will be refreshing multiple older devices.

RELATED:

OnePlus Bullets Wireless Z2 key features tipped before India launch

Last month, we learned that the OnePlus Bullets Wilress Z2 neckband-style Bluetooth wireless earphones will launch in India by March or April. Now, a tipster has not only revealed when we can expect this audio accessory but also its features.

OnePlus Bullets Wireless Z Reverb Red Featured
OnePlus Bullets Wireless Z

Ishan Agarwal has partnered with MySmartPrice to disclose more details about the upcoming OnePlus Bullets Wireless Z2. According to him, the earphones will be unveiled alongside the OnePlus 10 Pro in India. The launch of the brand’s latest flagship smartphone is said to take place on March 22 or March 24.

Bluetooth SIG listing of the product was previously revealed to bear model number E305A with Bluetooth 5.0 connectivity. Now, thanks to Ishan, we know more details about it.

First and foremost, the OnePlus Bullets Wireless Z2 will be available in two colors, such as black and blue. Further, the accessory will be IP55-rated for dust and water resistance.

The earphones will house 12.4mm dynamic drivers. They will have a battery life of 30 hours. Finally, fast charging support will enable users to gain 20 hours of battery backup with just 10 minutes of charging.

Although Ishan does not say anything about the price, we can expect the product to retail at around ₹1,999. Because the original OnePlus Bullets Wireless Z and the OnePlus Bullets Wireless Z2 Bass Edition were introduced at this price.

 

 

RELATED:

 

Apple reportedly saved $6.5 billion by removing charger & EarPods from iPhone box

Back in 2020, Apple had launched the iPhone 12 series without a charger and EarPods within the box. The company had cited various reasons for this move, and now, a new report has revealed that this saved billions of US dollars for the brand.

Apple iPhone 12 mini, iPhone 12 available starting at ₹38,999(~$526) in Flipkart Big Billion Days Sale

When the Cupertino based giant first announced that it would be removing the charger and EarPods, many felt that the company is just trying to save more of its profits despite it officially stating environmentally friendly reasons. It also claimed that the benefit of removing the two items include smaller packing boxes, which allowed for 70 percent more devices to fit in a shipping pallet. Thus, more boxed meant that Apple could ship more iPhones at a time.

This would enable it to also reduce its yearly carbon emissions by 2 million metric tons, which the company claims is equivalent to around 500,000 cars off the road. But according to a Daily Mail report, the iPhone maker might have saved around 5 billion Pounds so far after removing the charger and EarPods from the box, which roughly translates to about 6.5 billion US Dollars. In other words, the company may have removed the basic accessories from the box to make up for the cost of the new 5G modem on its iPhones. Apple

Notably, reducing the retail box also means that the company can reduce its shipping costs by around 40 percent. This, in turn, should lower the price of the phone to consumers. Furthermore, the brand is also now receiving additional revenue from customers that buy EarPods or AirPods and the charging brick separately. So, it won’t be a surprise if it managed to save up such a large sum in just two years.

RELATED:

 

MediaTek Dimensity 9000 SoC rivals Apple’s A15 chip on GeekBench

MediaTek has seen robust growth in the smartphone chipset market in recent times. Although it seems that the growth wasn’t simply restricted to its market share, but also its chip’s performance.

While Qualcomm is one of the main rivals of the Taiwanese chipmaker, MediaTek might have its sights set even beyond. Known tipster Ice Universe recently shared a GeekBench listing of the brand’s latest flagship Dimensity 9000 SoC, and its performance was impressive. As of right now, the chipset is the company’s most powerful SoC ever and has managed to beat even Qualcomm’s current gen flagship, the Snapdragon 8 Gen 1, in some benchmarks.

No smartphone has launched with the new chip, however, many brands will be releasing their offerings soon. Looking at he GeekBench listing shared by Ice Universe, the Xiaomi smartphone (which might be the upcoming Redmi K50 Pro+) scored 1309 points in the single core test and 4546 points in the multi core tests. In comparison, the Exynos 2200 on the Galaxy S22 series got 1157 and 3307 points respectively. Similarly, the Google Tensor chip on the Pixel 6 Pro also managed to receive a score of just 1042 and 2832 points in the same tests.

MediaTeK Dimensity 9000

So, the Apple A15 Bionic is the only chipset that managed to get a score that decisively beats the Dimensity 9000 SoC, with its score of 1734 in single core test and 4818 in the multi core test. Keep in mind that synthetic benchmarks only show raw performance and not how the chipset might actually perform in real life. But its still impressive that MediaTek managed to near Apple’s top SoC and even outperform Qualcomm, which is usually the go to chipset for flagship Android phones.

RELATED:

 

OnePlus 10 Pro memory, color variants tipped for India

OnePlus is expected to launch the OnePlus 10 Pro by the end of this month in India. Recently, a tipster revealed that the handset may debut in the country either on March 22 or March 24. A few days from that, another leak has emerged disclosing the variants heading to the region.

OnePlus 10 Pro hands-on featured 3

According to Ishan Agarwal (via 91Mobiles), the OnePlus 10 Pro will be available in two colors and two memory configurations in India. 

Customers will be able to avail the smartphone in either Volcanic Black or Emerald Forest color options. Even in China, the device comes in these two colors as standard, in addition to a region-exclusive limited edition featuring a ceramic white finish.

Talking about memory configurations, the OnePlus 10 Pro will be sold in 8GB + 128GB and 12GB + 256GB versions in India. For the unaware, the phone also arrives in an 8GB + 256GB model in its home country. Additionally, the ceramic white color variant sports 512GB storage and 12GB RAM.

Unfortunately, Ishan hasn’t disclosed the price of the handset in India. As far as specifications are concerned, the smartphone is said to sport the exact same set of features as the original version, except for the software. The device will boot OxygenOS 12 based on Android 12 outside mainland China instead of Android 12-based ColorOS 12.

How much do you think the OnePlus 10 Pro will cost in India and other international markets? Do let us know your guesses in the comment section below.

 

 

RELATED:

 

Motorola Edge X30 Under Screen Edition teaser hints at 512GB storage model

Last year, in December 2021, Motorola took the wraps off the Moto Edge X30 flagship smartphone as the world’s first smartphone to come powered by the Qualcomm Snapdragon 8 Gen 1 SoC.

Now, the Lenovo-owned company is gearing up to launch a new variant of the phone, dubbed as Motorola Edge X30 Under Screen Edition, which will feature an under-display camera. Ahead of the launch later this week, teasers are revealing some key details.

Motorola Edge X30 Under Screen Edition 512GB Storage Teaser

A new teaser poster of the Motorola Edge X30 Under Screen Edition smartphone shared by the company hints that the device will have a model that will pack 512GB of internal storage. For those who are unaware, the regular Edge X30 smartphone is offered in only two internal storage options — 128GB and 256GB.

The smartphone is likely to feature a 6.7-inch OLED Full-HD+ display with a 144Hz refresh rate and a 576Hz touch sampling rate. It will offer a 100 percent DCI P3 color gamut, HDR10+, and an in-display fingerprint sensor.

Under the hood, the device will be powered by the Snapdragon 8 Gen 1 SoC, coupled with up to 12GB of RAM. In the camera department, it is likely to have a triple-camera setup with a 50-megapixel primary sensor.

On the front side, the smartphone will be featuring a 60-megapixel snapper and will also have support for facial recognition. The phone will be running the Android 12 operating system and powered by a 54,700mAh battery with support for 68W fast charging.

RELATED: 

Redmi K50 series teaser confirms Samsung 2K display; launching on March 17

Xiaomi-backed Redmi is gearing up to launch new Redmi K50 series smartphones after launching the Redmi K50 Gaming Edition last month in its home country China.

The company has already confirmed that the Redmi K50 series phones will be officially announced for the Chinese market on 17th March. Now, ahead of the launch, the brand has started teasing features of the upcoming smartphones.

Redmi K50 Series Samsung 2K Screen

In the latest teaser poster shared by the company, it is confirmed that the Redmi K50 series smartphones will feature a display with support for 2K screen resolution which will be sourced from South Korean giant Samsung.

It is claimed to have a pixel density of 526ppi and has support for several advanced adjustments. The company has also revealed that it is the most expensive display in the history of Redmi.

So far, the teasers have confirmed that the Redmi K50 series phones will come with dual stereo speakers with support for Dolby Atmos and Hi-Res Double Gold certification. For connectivity, there’s dual-frequency GPS, Wi-Fi 6, NFC, IR blaster, and is said to be the first in the industry to support Bluetooth 5.3.

Lu Weibing, CEO of Redmi has confirmed that the Redmi K50 series will support parallel operations of Wi-Fi and Bluetooth, which is useful for gamers as it allows them to game with Bluetooth headsets without worrying about internet delay.

The company is expected to launch three devices — Redmi K50, Redmi K50 Pro, and Redmi K50 Pro+ powered by the Qualcomm Snapdragon 870, MediaTek Dimensity 8100, and MediaTek Dimensity 9000, respectively. To know for sure what the devices pack, we will have to wait for the official launch event in a few days.

RELATED: 

Apple iPhone 14 Pro models to have much better specs than regular models

Apple’s upcoming iPhone 14 series has been in the news for the past few months, revealing some key details about the upcoming flagship phones. A few key details about the Apple iPhone 14 series are already known and some more details have surfaced online.

In a new report, analyst Ming-Chi Kuo claims that unlike the smartphones from Apple launched so far, the upcoming iPhone 14 models and iPhone 14 Pro models will have drastically different specifications.

Apple iPhone 14 Pro Render
Apple iPhone 14 and 14 Pro Concept Renders

Kuo claims that the upcoming Apple A16 Bionic processor will be powering only the Pro models of the iPhone 14 series, i.e. iPhone 14 Pro and Pro Max while the regular models, i.e. iPhone 14 and 14 Max will have the Apple A15 Bionic processor.

Further, the upcoming lineup will have 6GB of RAM, which is an improvement when compared to the current-generation iPhones that have 4GB of RAM. However, the Pro models in the iPhone 14 series will have LPDDR5 RAM while the standard models will keep using the LPDDR4X RAM.

Earlier it was reported that the Pro models will come with a dual pill-shaped punch-hole cutout on top of the screen for housing the front-facing camera while the regular models will continue to have a notch.

Usually, the Pro and non-Pro models of the iPhones don’t have these many differences in terms of the core specifications but this year, Apple appears to be experimenting with significantly different core internals for the iPhone models. To know for sure how much of this is true, we will have to wait for the official launch event later this year.

RELATED: 

Samsung confirms March 17th launch event for Galaxy A-series smartphones

Samsung recently launched the Galaxy S22 series flagship smartphones at the Galaxy Unpacked event last month and now the company is gearing up to launch new A-series smartphones later this month.

The South Korean technology giant has now started sending out media invites for its second major launch event of the year. The event will take place on 17th March at 10:00 AM ET and will be live-streamed.

Samsung Galaxy A-Series Launch Event March 2022

The event invitation from the brand clearly states that it will be focused on introducing the company’s mid-range Galaxy A-series smartphones but Samsung has not confirmed which devices will get launched at this event.

Reports about the event happening in the second half of this month were making rounds and Evan Blass recently shared leaked images related to this event. If the reports are to be believed, then Samsung could launch three devices — Galaxy A33, A53, and A73.

The Samsung Galaxy A33 is expected to be an updated version of the Galaxy A32 that was launched in February last year while the Galaxy A53 and Galaxy A73 will be the successor of the Galaxy A52 and Galaxy A72 smartphones launched in March 2021.

Based on the leaks, the Samsung Galaxy A73 is expected to have a 6.7-inch display and pack Qualcomm Snapdragon 750G chipset while the Galaxy A53 could have a 6.5-inch display and be powered by the brand’s own Exynos 1200 SoC. To know for sure, we will have to wait for the official launch event in a few days.

RELATED: