Advertisement

OnePlus Nord CE 2 Lite 5G render surfaced ahead of release

OnePlus Nord CE 2 Lite 5G is all set to launch on April 28 in China. With the phone’s release, the company is planning to cater to the sub-Rs. 20,000 market. Now, the tipster Evan Blass has shared an official render of the phone giving us a closer look at its design.

As per the render, the Nord CE 2 Lite 5G looks similar to Realme’s 9 Pro. It is because the phone is rumored to be a rebranded version of the 9 Pro. It appears that OnePlus has simply added a pattern around the camera island to make it look different.

OnePlus Nord CE 2 Lite 5G
OnePlus Nord CE 2 Lite 5G

Apart from this, the phone’s specs were already rumored. The smartphone has a punch-hole display on the front and a triple camera system on the back. If we go by the leaks, the OnePlus Nord CE 2 Lite 5G will feature a 6.58-inch FHD+ LCD display with a 120Hz refresh rate support.

It will have a 16MP front camera for selfies and a 64MP + 2MP (macro) + 2MP (depth) triple-rear camera system. It will be powered by the Qualcomm Snapdragon 695 SoC paired with 6GB/8GB of RAM and 128GB of internal storage.

It will pack a 5,000mAh battery with support for 33W fast charging. The phone will boot on Android OS and have a side-mounted fingerprint scanner offering added security. It will lack an alert slider, which is unlike any other OnePlus phone.

RELATED:

Micromax In 2c full specs sheet leaked along with renders: lacks a fingerprint scanner

Micromax is expected to launch its In 2c smartphone in the Indian market soon. Recently, the phone’s launch timeline was revealed and the device was certified on a couple of certification websites. In the newest development, the Micromax In 2c’s entire specs sheet and renders have been revealed.

Micromax In 2c Colors & Design 

The tipster Sudhanshu Ambhore on Twitter shared the renders of the phone in three of its colors. The phone appears to come in Black, Grey, and what seems like a Brown/Maroon shade.

Micromax In 2c

Coming to the phone’s design, it looks almost similar to its sibling, In 2b, from both the front and back, however, the fingerprint scanner is missing on this one. The “IN” branding has now moved to the bottom center and the speaker is backfiring, placed in the bottom right corner.

The camera island, however, is similar to the In 2b, with an LED flash below the sensors. The front has a water-drop notch panel, a single selfie snapper placed at the top, and an earpiece.

Micromax In 2c Specifications (rumored)

The smartphone sports a 6.52-inch HD+ display with a 720 x 1600 pixels resolution. It has 400 nits of brightness and an 89% STB ratio. It equips a 5MP selfie snapper and a dual-camera system at the rear. The rear setup goes by an 8MP main lens and a VGA sensor.

At the helm, it is powered by the UNISOC T610 chipset paired with 4GB/6GB of LPDDR4x RAM and 64GB of eMMC 5.1 internal storage(expandable via microSD card slot). The phone packs a 5,000mAh battery and has a 10W charging speed.

The device will come running on the Android 11 OS out of the box and have dual-SIM support. As said above, it unfortunately lacks a fingerprint reader. Lastly, it has a 3.5mm headphone jack and a USB Type-C port.

RELATED:

Indian wearable maker GOVO launches three affordable earbuds

Three Govo earbuds have been launched in India. They are GOBUDS 901, GOBUDS 902, and GOKIXX 651 respectively. The GOBUDS models are TWS devices while the GOKIXX 651 is a neckband model. The GOKIXX 651 is the least expensive and will sell at Rs.1,599 (~$21). All three models are now available via Amazon India and Flipkart.GOBUds 902

GOVO is an Indian startup based in Bangalore. It hopes to shore up its ranking in the market with its latest audio products. Except for design differences, the two GOBUDS models have similar components. The GOBUDS 901 and GOBUDS 902 have 10mm dynamic drivers for deep BASS and True audio, 20 hours of battery life, and Bluetooth 5.0 connectivity.GOKIXX 651

In addition, the models support multiple voice assistants like Siri and Google Assistant. The aluminum touch controls provide excellent controls when using earphones. These are also accentuated by their stylish and distinct designs.

The GOKIXX 651 neckband is made from medical-grade Silicon. It features a CNC, CD Texture, magnetic earbuds, and a metallic polished finish. It has HD RICH Sound and can be charged rapidly. About 10 minutes of charge could deliver up to 10 hours of smooth music.GOBUDS 901

The battery of the GOKIXX can last up to 20 hours. The neckband has Bluetooth 5.1 connectivity, Passive Noise Cancellation, IPX5-rated resistance, and built-in voice assistant support.

RELATED:

 

(via)

 

OPPO A53s 5G gets stable ColorOS 12 in India

Last month, OPPO kicked off the ColorOS 12 Beta program for the OPPO A53s 5G smartphone. And now, right on schedule, the brand has begun rolling out a stable Android 12 build for Indian users on the A53s 5G.

Oppo A53s 5G

The official community post says that the initial rollout is only a part of the first batch, meaning more batches will be following soon. If you haven’t received a notification for the update, then you may need to wait a while. Just make sure that your A53s 55 is on firmware version A.08/A.09 beforehand.

The brand has also stated that the update is only available for the Indian variant right now, and global users will likely receive it later on.

coloros 12 update rollout

To check for the latest available update on your Reno4 or Reno4 Pro, head over to Settings > Software update. If you aren’t on the latest ColorOS 11 build, then you may not get the ColorOS 12 notification so might want to ensure that first.

ColorOS 12 is based on Android 12 and arrives with a bunch of new features and improvements. Elements throughout the interface have been tweaked visually, be it icons, the quick settings panel, or system apps. You also get some of those enhanced A12 privacy features such as the new Privacy Dashboard and microphone and camera Indicators.

 

RELATED:

OnePlus 10R to launch in two charging variants, battery sizes may vary

OnePlus has announced that it will be launching the OnePlus 10R in India on April 28th. The brand also confirmed that the device is basically the rebranded OnePlus Ace which is scheduled to launch in China on April 21.

OnePlus 10R Launch Teaser

Now, ahead of the OnePlus 10R launch, OnePlus India has revealed that the device will be made available with two different fast charging capabilities. The brand states the phone will come with 150W SUPERVOOC and 80W SUPERVOOC charging.

This is similar to what we’ve seen with the Realme GT Neo3, which is technically the first smartphone under the BBK Electronics wing to launch with the 150W fast charging tech from OPPO.

The Realme GT Neo3 was launched in two versions: one with a 4,500mAh battery and 150W fast charging, and the other with a slightly larger 5,000mAhh battery and 80W fast charging. So it is more than likely that that’s the route OnePlus will go with the OnePlus 10R.

OnePlus 10R specs and features (Rumored)

Oneplus Ace / Oneplus 10R

So far, the rumors surrounding the OnePlus 10R state that the device will come with a 6.7-inch E4 AMOLED display with a Full HD+ screen resolution, a 120Hz refresh rate, HDR10+ support, and a punch-hole cutout in the top-center of the screen for the front camera.

Under the hood, the device will be powered by the MediaTek Dimensity 8100 processor, coupled with LPDDR5 RAM and UFS 3.1 storage. It will come in two memory variants — 8GB RAM with 128GB internal storage and 12GB RAM with 256GB internal storage.

There will be a triple-camera setup on the back panel, which will feature a 50-megapixel Sony IMX766 primary sensor, an 8-megapixel Sony IMX355 ultra-wide lens, and a 2-megapixel macro sensor. On the front, the smartphone will have a 16-megapixel Samsung ISOCELL S5K3P9SP lens for taking selfies and video calling.

The OnePlus 10R is expected to run the Android 12 operating system with the company’s own OxygenOS on top.

RELATED:

Samsung India accidentally shares teaser for an upcoming rugged SSD

Samsung India may have accidentally released a teaser for a rugged SSD that could be launched soon. The upcoming T7 SSD is being promoted with two hashtags: Rugged Durability, and Drop Resistant. This is also reflected in the teaser poster which accompanied the post.Samsung SSD

Although a specific release date has not been given, we expect it to be very soon. The two hashtags for the new drive could exemplify its ruggedness and durability. It is rumored to be a more rugged version of the 2020 T7 SSD. The T7 is a very strong device with a metal covering. It can withstand shocks of up to 2 meters.

The teaser reveals a striped body, a USB-C port, and a LED status indicator for the T7. It is also rumored to comply with the MIL-STD 810G durability standard. The T7 SSD comes with an AES 256-bit hardware encryption for improved data security. It also utilizes DTG (Dynamic Thermal Guard) and ePCM (Encapsulated Phase Change Material) to protect it from thermal damage. At all times it maintains an optimal operating temperature to avoid low-temperature burns.

The teaser seems to be the precursor to a more engaged and direct campaign. We’ll get to know more about the new rugged Samsung drive in India in the coming days.

RELATED:

 

(via)

 

Galaxy Watch 4’s ECG and BP monitoring functions now live in Canada

Canada-based users of the Samsung Galaxy Watch 4 now have a couple of important health features activated in their devices. The recent firmware update of the Galaxy Watch 4 in Canada may have seen the blood pressure and electrocardiography (ECG) feature activated in the device.Galaxy Watch 4

This new update provides greater depth and functionality for Galaxy Watch 4 users which places the device on a higher pedestal. Galaxy Watch 4 series users in Canada will now be able to get more comprehensive health and fitness information from their devices. The updated Samsung Health Monitor app will provide the interface to enjoy a bouquet of services. The Galaxy Watch 4 series is compatible with Galaxy smartphones running on Android 7.0 and above.

Samsung Galaxy Watch 4 Golf Edition
Samsung Galaxy Watch 4 Golf Edition

Since the release of the Galaxy Watch 4 series last year, the BP monitor and ECG function have been dormant in the device. Part of the issues was related to regulatory requirements that ought to be met before the features could be certified fit for use in Canada. The latest firmware update makes the BP and ECG sensors to be active on Galaxy Watch 4 and Watch 4 Classic models in Canada. Upon update of the firmware, users will be able to enable the BP and ECG options inside the app. You can then calibrate the smartwatch to provide accurate readings of the two health statistics.

RELATED:

 

OPPO Pad Indian launch timeline & price tipped, Reno8 to launch timeline also revealed

With the recent rising demand for tablets around the globe, OPPO launched its first tablet in the market earlier this year dubbed the OPPO Pad. To date, the tablet has remained exclusive to the Chinese market. However, a new report suggests that it will be making its way to India soon.

OPPO Pad

According to tipster Mukul Sharma, the OPPO pad will soon launch in India. The tipster states that the tablet will make its Indian debut between June end and July. According to Sharma, the OPPO Pad will be priced between ₹25,000 (~$327) to ₹30,000 (~$392) in the country. For context, the OPPO Pad starts at 2,299 yuan (~$359) in China which roughly translates to ₹27,500 (~$363).

As per Sharma, OPPO is also expected to launch the Reno8 series smartphones during the same timeframe in India.

OPPO Pad specifications

The OPPO Pad comes with an 11-inch IPS LCD display that offers a Quad HD+ resolution of 1600 x 2560 pixels, a 16:10 aspect ratio, and a 120Hz refresh rate. It offers a 1500:1 contrast ratio, HDR10, and P3 wide color gamut.

OPPO Pad

Under the hood, the tablet features a Snapdragon 870 SoC paired with up to 8GB of LPPDR4x RAM and 256GB of storage. The tablet comes with a large 8360mAh battery that supports 33W fast charging. The tablet is equipped with an 8-megapixel front camera and a 13-megapixel rear camera. For audio, the OPPO Pad has a quad-speaker setup with Dolby Atmos and Hi-Res audio certification. It runs Android 11-based ColorOS out of the box.

The pad also offers stylus support with the OPPO Pencil, which offers 4096 levels of pressure sensitivity, magnetic suction, and wireless fast charging.

 

RELATED:

 

Realme releases Realme UI 3.0 update rollout schedule for Q2 2022

Realme has released the lineup of devices that will be getting the Android 12-based Realme UI 3.0 updates this quarter. The upgrade has already landed in some of the Realme devices from December 2021. The latest rollout is connected to a few devices that will join the expanding ecosystem of the new OS.Realme UI

Realme has scheduled a sequential rollout for devices to enjoy the early feel of the updates and it begins with the Realme 8 5G this month. Other devices to have access to the software this month are the Realme 8s 5G and Narzo 30 5G. In May 2022, the Realme 9i and Realme X7 will join the train. The last leg of the rollout will take place in June and the devices lined up are the X3, X3 SuperZoom, Narzo 30 Pro 5G, and the Realme 9 5G.

The lineup of devices to receive this early access for the Android 12-based firmware contain some of the flagship offerings by Realme. Selected users in batches will be granted access to the firmware and this precedes the release of the stable version. By the time the stable version of the Realme UI 3.0 arrives, we expect all bugs to have been fixed.

RELATED:

 

(source)

 

Realme Q5 series launching tomorrow: how to watch the launch event

Realme will be announcing the Realme Q5 series of smartphones tomorrow at 2 PM (local time) on April 20 in China. The lineup includes three smartphones such as the Realme Q5 Pro, Realme Q5, and Realme Q5i. However, the Q5i was announced earlier this week in the home market. The TENAA listings of the Q5 and Q5 Pro phones that have appeared in recent days have revealed all their major specifications.

Realme Q5 series launch event: how to watch the livestream

Realme’s Q-series is exclusively available in China. Even if they are made available in markets outside China, they carry a different name. The Realme Q5 launch event will be live-streamed through its Weibo handle. Some Chinese portals like Mydrivers and ITHome may liveblog tomorrow’s event. As always, you can count on GizmoChina to cover the Realme Q5 series launch event.

Realme Q5 Pro specifications (rumored)

Realme Q5 Pro
Realme Q5 Pro image by Evan Blass

The Realme Q5 Pro (RMX3372 model number) has a 6.62-inch FHD+ AMOLED display with a 120Hz refresh rate and an under-display fingerprint scanner. It has a 16-megapixel front camera, and a 64-megapixel + 8-megapixel (ultrawide) + 2-megapixel (macro) triple camera unit. The Snapdragon 870 powered device will offer up to 12 GB of RAM and up to 512 GB of built-in storage.

It will come with a 5,000mAh battery that supports 80W fast charging. A recent leak claimed that the company may also introduce the Realme Q5 Pro Vans Special Edition with a unique design.

Realme Q5 Pro Vans Special Edition leaked
Realme Q5 Pro Vans Special Edition

Realme Q5 specifications (rumored)

Realme Q5
Realme Q5 images at TENAA

The Realme Q5 (RMX3478 model number) will come with a 6.58-inch LCD FHD+ panel, a 16-megapixel front camera, and a 50-megapixel + 2-megapixel + 2-megapixel triple rear cameras. The Snapdragon 695 powered device will offer up to 12 GB of RAM, up to 256 GB of storage, a side-facing fingerprint scanner, and a 5,000mAh battery with 65W fast charging.

Realme Q5i specifications

Realme Q5i
Realme Q5i

The Realme Q5i has a 6.58-inch LCD FHD+ 90Hz screen, an 8-megapixel selfie snapper, and a 13-megapixel + 2-megapixel + 2-megapixel triple camera unit. The Dimensity 810 powered smartphone may offer up to 6 GB of RAM, 128 GB of internal storage, a side-mounted fingerprint sensor, and a 5,000mAh battery that supports 33W rapid charging. All three phones are preinstalled with Android 12 OS and Realme UI 3.0. It carries a starting price of 1,199 Yuan (~$187).

RELATED:

Sony IMX989 sensor details leaked, rumored to debut with the Xiaomi 12 Ultra

Last month, news emerged that the upcoming Vivo X80 Pro will feature Sony’s IMX8 series sensor for its primary camera. The sensor is rumored to be the IMX866. Now, news has emerged that Sony has another camera sensor under wraps, which may be the IMX989.

Sony IMX989

According to Weibo tipster DigitalChatStation, Sony has an upcoming 50-megapixel sensor in the IMX9 series, which could be called the IMX989. The tipster adds that this sensor is close to 1inch (hypothetical) in size.

The tipster has previously stated that the upcoming IMX9 series sensor will first debut in the upcoming Xiaomi 12 Ultra smartphone. So we can expect the 12 Ultra to come equipped with massive photographic capabilities housing the near 1-inch IMX989 sensor.

Xiaomi 12 Ultra specs (rumored)

Xiaomi 12 Ultra concept render by LetsGoDigital
Xiaomi 12 Ultra concept render by LetsGoDigital

So far, rumors about the device have stated that it will come with a 6.73″ 2K 120Hz E5 AMOLED Display display supporting LTPO 2.0 technology.

The camera setup at the rear will comprise a 50MP primary sensor with OIS support, 48MP ultrawide again with OIS support, and finally a 48MP telephoto lens with 120x zoom support.

Under the hood, there will be the TSMC-made Snapdragon 8 Gen 1 Plus chip, fueled by a 4900mAh battery with 120W fast charging support. The phone will also pack stereo speakers and feature an IP68 water resistance rating. It will boot to Android 12 out of the box.

Although there is no confirmation regarding the device as of yet, it is rumored to launch around the end of Q2 2022.

 

RELATED:

iQOO Neo6 bags BIS certification, India launch could be drawing near

iQOO Neo6 went official last week in China. Priced at 2,799 Yuan (~$439), the iQOO Neo6 is one of the most affordable Snapdragon 8 Gen 1 powered smartphones in China. Fresh information reveals that the Neo6 has bagged certification from the Bureau of Indian Standards (BIS). This indicates that the iQOO Neo6 could be coming to India in the coming weeks.

The below-shown screenshot shared by tipster Mukul Sharma shows that two iQOO devices with model numbers I2022 and I2126 have received approval from the BIS authority. These model numbers reportedly belong to the upcoming iQOO Neo6 and the iQOO Z6 Pro 5G that is scheduled to debut on April 27 in India.

IQOO Neo6 Indian variant BIS certified

The BIS certification is a good hint that the iQOO Neo6 could be coming soon to India. Since the iQOO Z6 Pro 5G is launching next in India, it is likely that the Neo6 could be coming to India as early as May in India.

iQOO Neo6 specifications

The iQOO Neo6 features a 6.62-inch AMOLED display with a punch-hole design. It offers a Full HD+ resolution, a 20:9 aspect ratio, and a 120Hz refresh rate. The display is integrated with a fingerprint scanner. The Snapdragon 8 Gen 1 powered device comes with up to 12 GB of LPDDR5 RAM. On the storage front, it comes with up to 256 GB of UFS 3.1 storage.

iQOO Neo6
iQOO Neo6

The Neo6 has a 16-megapixel camera for snapping selfies and video calls. Its rear camera setup has a 64-megapixel main camera with OIS support, a 12-megapixel ultrawide camera, and a 2-megapixel depth sensor. It is backed by a 4,700mAh battery that supports 80W fast charging. It lacks a 3.5mm audio jack.

RELATED:

POCO Buds Pro Genshin Impact Edition spotted on Bluetooth SIG certification

POCO is gearing up to launch a new smartphone later this month. It is the F4 GT, which is set to be unveiled on April 26. However, it seems that will launch alongside a hearable, which might be the POCO Buds Pro Genshin Impact Edition.

POCO
Redmi AirDots 3 Pro Genshin Impact Edition

The special edition of the truly wireless earbuds was recently spotted receiving the Bluetooth SIG certification. In other words, its launch might be imminent and with the F4 GT announcement being just around the corner, it won’t be a surprise if the Chinese smartphone maker released both products together. The earbuds were spotted on the Bluetooth SIG website carrying the model number TWSEJ01ZM, which also hints that it is a rebranded version of the same limited edition model of another earbud from Redmi.

For those unaware, Xiaomi had launched the Redmi AirDots 3 Pro back in May 2021. Furthermore, it even released a Redmi AirDots 3 Pro Genshin Impact Edition earlier this year. Apart from special additions in its design, the limited edition model was identical to the AirDots 3 Pro. So, we can already make some educated guesses regarding the POCO Buds Pro Genshin Impact Edition’s specifications. It will likely house a 9mm audio driver, support active noise cancellation up to 35 decibels, and even offer a transparency mode as well.

Redmi Airdots 3 Pro Genshin Impact

Other features include Bluetooth 5.2, a dedicated gaming mode with 69ms latency, a triple microphone setup for the environmental noise cancellation feature, IPX4 water resistance rating, gesture controls, and more. The new special edition wireless earphone might also pack the same 35mAh battery pack for each earbud that offers 6 hours of audio playback and another 28 hours of total playback from its 470mAh battery pack on the charging case. Keep in mind that it is still too early to tell, and this is just speculation at the moment, so take this report with a pinch of salt.

RELATED:

 

Samsung announces special edition Galaxy Z Flip3 for Pokemon Fans

Samsung has just announced a special edition Galaxy Z Flip3 which will soon be launching in South Korea. The special edition device will be themed on the popular anime “Pokemon” and therefore will be called the Galaxy Z Flip3 Pokemon Edition.

Samsung Galaxy Z Flip3

The company has announced that the event will be exclusive to their website and that the Galaxy Z Flip3 Pokemon Edition devices will not be made available for purchase in the Samsung experience stores.

Looking at the listing on the website, the Galaxy Z Flip3 Pokemon Edition will come with a large packaging box. Other than the device, the company has included many exclusive Pokemon-themed goodies inside the box, like a Pikachu clear cover set, a Pokedex-themed pouch, a Pikachu keychain, and a Poke Ball-shaped stand. Additionally, it also looks like Samsung is offering exclusive Pokemon cards with the bundle, including Pikachu, Bulbasaur, Charmander, Squirtle, Snorlax, and Mew cards.

The Pikachu Clear Cover is customizable. The phone can also come with some unique themes, ringtones, and wallpapers related to Pokemon. More information about the phone will be available later this week.

The device is set to go on sale via Samsung’s Korean website in five days. So far, the company hasn’t revealed the price of this special edition Galaxy Z Flip3 or the number of devices that will be available for the special event. Interested readers can head over to Samsung’s Korean website and subscribe to get notified when the device goes on sale.

 

RELATED:

HP may be working on 17 inch laptop with foldable OLED display: Report

HP is apparently planning on launching a new 17 inch foldable laptop. The latest rumor is that the company working on a laptop with a flexible OLED display and is sourcing a cover for this screen from a South Korean supplier.

HP

According to TheElec report, the known PC maker is supplying the thin ad flexible polyimide (PI) film that will cover the 17 inch flexible OLED panel for its foldable laptops from South Korean conglomerate, SK IE Technology (SKIET). For those unaware, foldable panels that brands employ usually consist of either UTG (Ultra Thin Glass) or the PI film. The former is prominent in Samsung Galaxy Z series devices. But it seems that Hewlett-Packard’s foldable laptop will favor the latter.

As per recent rumors, the foldable laptop will sport a 17 inch panel that has a 4K resolution. Furthermore, in its compact form, it will measure just 11 inches and can unfold to its full size of 17 inch. So, it’s likely that the display technology is from LG, which showcased larger sized bendable OLEDs back at the CES 2022 event. In other words, there’s a chance that it might also come with a stylus and touchscreen support.

TheElec found that SKIET and LG will be shipping around 10,000 flexible OLED displays and protective films to HP. The limited quantity is likely due to the niche market that the foldable device targets. Meaning, it is probably going to be quite expensive as well. But as of right now, we have no news regarding its pricing or even possible specifications. So stick around for more updates.

RELATED:

 

Dizo Watch S launched in India, with 1.57 inch display, 10 day battery, & more

Dizo has just launched a new product in India earlier today (19th April 2022). It is the new Watch S, which features a rectangular display design and other functions that most smartwatches offer. So let’s take a look.

 

Dizo

The Dizo Watch S sports a 1.57 inch rectangular display that has a peak brightness of 550 nits. It also comes with support for more than 110 sports modes, which include running, walking, cycling, gymnastics, elliptical, yoga, cricket, mountaineering, and many more. Furthermore, the new smartwatch also tracks the steps you take, calories burnt, and distance covered as well. Apart from this, it also offers the usual sleep, and heart rate monitoring, along with SpO2 blood oxygen mapping as well.

Notably, the new wearable from the company is even capable of tracking female users’ menstrual cycles as well. The Watch S also comes with an IP68 protection rating for dust and water resistance. The brand even placed an emphasis on the design of the smartwatch, which features an attractive metal frame that offers a premium look. Other features include, GPS support, Bluetooth 5.0, and a 200mAh battery pack that can last for up to 10 days on a single full charge.

Dizo Watch S

As of right now, the Dizo Watch S has been launched in India for a price of 2,299 INR (roughly 30 US Dollars). Although, it is available for an introductory price of just 1,999 INR (roughly 26 US Dollars) on its first date of sale. The new smartwatch arrives in multiple color variants, namely Classic Black, Golden Pink, and Silver Blue options. So for those interested, you can buy the device when it officially goes on sale on Flipkart and other select retail stores in India on April 26.

RELATED:

 

Vivo Y33s and Y33T prices slashed in India by Rs 1000 ($13)

Vivo has just slashed the prices for two of its smartphone models in India. The devices in question include the Vivo Y33s and the Y33T. Both models have seen a reduction in price, so let’s have a look at their new price tags.

Vivo Y33s 5G

The news arrives from 91Mobiles, who exclusively learned from retail sources within the country. Notably, the price cut arrives just months after the smartphones were launched in the region. Although, both devices come with similar specifications. Talking about the Y33T first, it sports a 6.58 inch FHD+ display with a 90Hz refresh rate and 2408×1080 pixels resolution. It packs the Qualcomm Snapdragon 680 SoC, which is paired with 8GB of RAM and 128GB of internal storage. The device houses a 50 megapixel triple camera sensor on the rear, while the front features a 16 megapixel selfie camera.

On the other hand, the Vivo Y33s also sports a similar 6.58 inch FHD+ LCD display with 2,400×1,080 pixels resolution. It also comes with a MediaTek Helio G80 SoC that is paired with 8GB of RAM and 128GB of internal storage. While the Y33T runs Android 12 out of the box, the Y33s comes with Android 11. On the rear, it houses a 50 megapixel triple camera setup, while the front features a 16 megapixel sensor.

Vivo Y33T

With the new price drop, both smartphones are now available for 1,000 INR (roughly 13 US Dollars) cheaper in India. In other words, the Vivo Y33T, which launched for 18,990 INR (roughly 250 US Dollars), is now priced at 17,990 INR (roughly 235 US Dollars). Meanwhile, the Y33s was originally launched for 17,990 INR, but saw a price hike to 18,990 INR. So, the price slash brings it back to its original price tag. The new price cut is effective as of today (19th April 2022), which should be seen in Amazon, Flipkart, and other retail stores as well.

RELATED:

 

Okinawa dealership in flames after Praise Pro e-scooters catch fire, company issues recall

The track record of EVs (Electric Vehicles) in India isn’t looking too good with all the recent fire related accidents. And now, another major incident has just surfaced as an entire Okinawa Autotech dealership got burnt down, which is believed to be caused by an EV inside the store.

Okinawa

According to a 91Mobiles report, this incident has caused the company to issue a recall for its Praise Pro electric scooters. Apparently, the reason for the recall is under a fault check up and redressal service. The brand had issued a recall for 3,215 units of its EVs on 16th April 2022. The units were the Okinawa Praise Pro e-scooters, which are apparently facing an issue with their battery pack, which caused the fire related accident.

For those unaware, three of the company’s e-scooters caught fire back in October 2021. This ended up causing injuries to two people. On the other hand, the fire accident in the dealership was even more intense, but it remains to be seen how extensive the damage really was. But looking at videos shared on social media, we can assume that it is unlikely that anything was left uncharred on the inside.

The accident might have been caused by just one faulty battery but its flames ended up engulfing the entire dealership. As of right now, it was reported that there were no casualties and the fire was put out eventually. This marks another case of EVs and a fire accident in India. There could be many reasons for this accident like the poor design or thermal management system for the battery. But we have no way of knowing for sure at the moment.

RELATED:

 

Huawei Smart Door Lock Pro now up for pre-order in China; price starts at 2,499 yuan ($392)

Huawei has been focusing on other products to expand its portfolio as it cannot generate much revenue through smartphones given that the brand is facing some heavy sanctions from the United States.

In line with that, the Chinese company has been focusing on a wide range of products and one of them is Smart Home devices. Last month, Huawei Smart Door Lock and Smart Door Lock Pro were announced in China.

Huawei Smart Door Lock Pro Pre-Order in China

Today, the company has started taking pre-orders for both devices. The Huawei Smart Door Lock is priced at 2,499 yuan (~$392) while the Pro model costs 3,699 yuan (~$580). The products can now be pre-ordered through Huawei Mall and JD.com and will go on sale from 28th April in the Chinese market.

Both these new smart door locks come powered by Huawei’s self-developed HarmonyOS, making it the world’s first smart lock to be using HarmonyOS. Thus, it is also a part of the HarmonyOS ecosystem and can be connected to other smart devices within the home.

The Smart Door Lock Pro is capable of 3D facial recognition and its AI architecture ensures self-learning that improves facial recognition over time. It is claimed to unlock the door within a couple of seconds of assessing the person at the door.

Huawei Smart Door Lock Pro

The company says that there’s a probability of 1 in a million that it will unlock the door for someone who ought not to gain access. It features a P50 Pro camera that can identify objects within a 150-degree viewing angle.

The device works for persons between 3.4 ft and 6.6 ft and can also work in both bright and dark light situations. The Huawei Smart Door Lock Pro has a 3.97-inch display that enables the owner to view persons at the door.

Huawei Smart Door Lock Pro also has several unlocking options including automatic, fingerprint, smartphone or smartwatch, password, NFC card, and a physical key. It is powered by an 8,800mAh battery that offers up to 6 months of daily usage.

RELATED: 

Apple iPhone 14 design & camera bump size showcased in leaked molds

Over the last couple of weeks, we have reported on various leaks and rumors regarding the 2022 Apple iPhone lineup. And now, another new leak has just surfaced, which showcases the design of the entire iPhone 14 series.

Apple

According to a MacRumors report, the latest leak comes from images of iPhone 14 series molds that showcase the design and the camera bump size of the four models. The report further added that these molds were found on Weibo (a Chinese microblogging website). So, they are likely to be molds used for third party iPhone protective covers rather than the ones used for the actual smartphones’ production.

Looking at these molds, the most noticeable aspect is undoubtedly the lack of an iPhone mini model. Apart from that, we can also observe changes in the iPhones’ sizes in 2022. This year, the Cupertino based giant is apparently getting rid of the 5.4 inch iPhone model, which did not perform too well in the smartphone market. So due to the poor sales, the company is now leaning toward larger iPhone sizes. Thus, the four molds we see include the 6.1 inch iPhone 14, 6.1 inch iPhone 14 Pro, 6.7 inch iPhone 14 Max, and the 6.7 inch iPhone 14 Pro Max.

Apple iPhone 14 Pro

Another notable change in design with the 2022 iPhones is the camera bump. Apparently, the camera bump sizes for the entire lineup will be taller than the previous generation, the iPhone 13 lineup. But for the most part, the iPhone 14 series will feature a similar design, with flat edges and rounded corners. On the other hand, the front is expected to finally replace the large notch in favor of a circular punch hole cutout.

RELATED: