Xiaomi is reportedly testing a phone with the Dimensity 9400 flagship chip. It’s important to note that Xiaomi usually uses Snapdragon flagships to power its flagship devices.
The news comes from Weibo tipster 智慧皮卡丘, who also claimed that the Dimensity 9400 chipset performed well in Xiaomi’s tests and that the phone could launch earlier than its expected launch time.
According to rumors, the MediaTek Dimensity 9400 chip will be equipped with the more advanced TSMC 3nm process. The single-core performance is about 30% higher than the previous Dimensity 9300 chip. It suggests that the Dimensity 9400 will perform similarly to the Snapdragon 8 Gen 4 chip. It is also reported that the Dimensity 9400 should be able to outperform the Apple A17 Pro chip in terms of multi-core performance.
The tipster also hinted that the flagship Xiaomi 15 series will come with an ultrasonic fingerprint scanner, which will be an upgrade from the optical ones Xiaomi has been using for quite a while.
When it comes to the Dimensity 9400-powered phone, it can be the Redmi K80 Ultra or a Xiaomi Civi series device. However, regarding the ahead-of-schedule launch he talked about, it doesn’t seem to be the next K series device. Therefore it is expected to be a Civi series model. Nonetheless, he didn’t reveal anything about the device himself.
The Dimensity 9400 chip will still come with a fully large core design and will boast the Cortex-X925 CPU core developed in cooperation with Arm. This is expected to be the key to the chipset’s 30% improvement in single-core performance. The chipset is also expected to offer an overall improved power efficiency and adopt a faster 10.7 Gbps LPDDR5x memory module.
XGIMI Z7X Projector Highlight Edition stands out as a top-tier choice for home entertainment, offering a blend of advanced technology and user-friendly features. You can now get this device for $549 at GeekWills.
Central to its performance is the 0.33-inch DMD chip, which ensures sharp, clear images with a 1080p resolution. The 880 CVIA lumens brightness, powered by a custom light source, allows for vibrant visuals even in well-lit environments. The projector’s throw ratio of 1.2:1 offers flexibility in placement, making it easier to achieve a large image size without needing a vast distance from the screen.
The heart of the XGIMI Z7X is its MT9669 Quad-core 64-bit processor, paired with a Mali-G52 GPU, 2GB of RAM, and 16GB of storage. This powerful combination ensures smooth performance, whether you’re streaming content or navigating through the Android TV operating system. The built-in Chromecast and AirScreen support makes it simple to mirror content from your devices, adding to the projector’s versatility.
One of the standout features of the XGIMI Z7X is its multi-functionality. It offers wall color adaptation, intelligent obstacle avoidance, automatic screen alignment, and trapezoidal correction, all of which contribute to an effortless setup and optimal viewing experience. These features make it ideal for various environments, whether you’re projecting on a wall, ceiling, or screen.
Sound quality is another area where the XGIMI Z7X excels, thanks to its Harman/Kardon Hi-Fi stereo sound system. This ensures that your audio experience matches the high-quality visuals, providing an immersive experience. The projector also supports HDR10 and HLG formats, enhancing the contrast and color range for more lifelike images.
Connectivity is well-covered with HDMI 2.0, USB 2.0, and a 3.5mm headphone jack. Additionally, the USB-C port simplifies power supply options. With dual-band WiFi and Bluetooth 5.1/BLE, you can easily connect to various devices and enjoy a stable, fast connection.
XGIMI Z7X Projector Highlight Edition is a powerful and versatile device that offers exceptional image quality, robust processing capabilities, and convenient features, making it an excellent choice for anyone looking to elevate their home entertainment setup.
Smartphones have rapidly evolved over the years, yet the way we interact with them remains largely unchanged. For most users, keypads and touchscreens are still the primary interfaces, mainly because they’re undeniably convenient.
This seemingly intuitive interface, however, can be a major hurdle for people with disabilities, such as those suffering from Amyotrophic Lateral Sclerosis (ALS).
ALS is a neurodegenerative condition that causes progressive muscle weakness, often leaving individuals with limited mobility. As a result, pressing a button or even a simple swipe on the screen can be a challenging task for them.
To make smartphones more accessible for these users, Honor introduced an intent-based eye-tracking system with MagicOS 8.0 as part of its commitment to human-centric innovation. The feature allows users to control their phones solely through eye movements.
“ALS patients often retain control only of their eye movement in the later stages of the disease”, says Limore Noach, executive director of the ALS Foundation Netherlands. Thanks to Honor, these users now have a new way to interact with their smartphones.
The system is called “intent-based” because it uses artificial intelligence to understand what the user wants to do. This makes it easier and more natural to navigate the phone.
The company demoed this intent-based eye-tracking system at MWC this year on the Chinese Magic 6 Pro smartphone. They’ve now confirmed that the feature will be rolled out to global devices starting August 27th. However, Honor has yet to specify which smartphones will support this technology. We hope that every device receiving MagicOS 8.0 will include it.
Looking ahead, Honor is also developing a brain-computer interface (BCI) system, which will allow people to communicate with external devices using brain signals—an incredibly convenient method for individuals with limited mobility.
While the BCI system is still in development, Honor is running a social media campaign, #HONORtheChallenger, to raise awareness for ALS across platforms like YouTube, Instagram, TikTok, and Facebook. The campaign is endorsed by athletes like Nile Wilson and has already garnered a global engagement of 11 million.
Just last week, the Vivo V40 series was unveiled in the Indian market. Now, the higher end V40 Pro model has finally gone on sale. This model is Vivo’s camera powerhouse bringing Zeiss cameras and other notable specs and features. So here are its specs, pricing, and special launch offers.
Vivo V40 Pro: Pricing, Offers, & More
The Chinese brand unveiled the Vivo V40 Pro for a starting price tag of 49,999 INR for its 8GB + 256GB variant. Meanwhile, the 12GB + 512GB version costs 55,999 INR. This device is currently listed on the company’s official website, Flipkart, and even offline stores.
Offline buyers get 6 months of free accidental liquid damage with flat 10 percent instant cashback. There are also 12 months of zero down payment options and up to 40 percent off on Vivo V-Shield with up to 10 percent exchange bonus. Those buying the Vivo V40 Pro online can avail 6 months of free accidental and liquid damage and the 10 percent instant cashback as well as a flat 10 percent exchange bonus with up to 6 months of no cost EMI.
Vivo V40 Pro
Specifications
To recall, the Vivo V40 Pro sports a tall 6.78-inch AMOLED display that offers 1.5K resolution, a 120Hz refresh rate, a 480Hz touch sampling rate, HDR10+, and up to 4500 nits of peak brightness. Under the hood, it is equipped with the MediaTek Dimensity 9200+ SoC. A massive 5,500mAh battery pack powers this device, which supports 80W wired fast charging.
For photography, the smartphone carries a 50-megapixel triple camera setup on the rear with Zeiss lenses, while the front houses a 50-megapixel selfie shooter. Out of the box, the Vivo V40 Pro runs on the Android 13 OS based Funtouch OS 14 custom skin. Other notable features include an in display fingerprint scanner, IP68 water and dust resistance, stereo speakers, and Bluetooth 5.3.
The Apple Watch SE (2022) launched with a plastic/sapphire crystal back and aluminum frame. Now it is rumored that the next-generation Apple Watch SE will come with a plastic casing. Based on the previous release dates, it is expected that the product will be launched in September this year.
Apple Watch SE (2022)
The news comes from a Bloomberg report, that claims that the next-generation Apple Watch SE plans to abandon the metal case and use a plastic case instead.
If true, it will be the first Apple Watch SE to come with a plastic frame. Reportedly the aim behind this move is to reduce costs in the hope of reducing the retail price to about $200. However, there could be other benefits of using the new material such as easier manufacturing. As compared to plastic, metal surfaces are harder to paint and it’s easy to provide a variety of color options with a plastic material. In addition to that, the reduced price (if true) can make the product affordable to a wider range of users.
It can be especially beneficial for school students who are not allowed to take their phones with them to the school. Here the watches can become an alternative to the more expensive smartphones that can help the parents stay connected.
Apple Watch SE 2022 specifications:
In order to give you an idea of what to expect from the next-generation Apple Watch SE, here are some of the specifications of the predecessor.
The Watch SE 2022 supports LTE connectivity, offers a 448 x 368 pixels display that reaches a peak brightness of 1000 nits, and is 1.78″ in size. It is protected with Ion-X strengthened glass. it packs 32GB storage and 1GB RAM and is powered by a dual-core chipset. It supports wireless charging and packs a bunch of sensors including an accelerometer, gyro, heart rate (2nd gen), barometer, always-on altimeter, and compass.
HMD recently released the Crest and Crest Max smartphones in India, and it is also working on other smartphones like the HMD Barbie phone. In addition to that, tipster @smashx_60 on X (formerly Twitter) has revealed some details about another upcoming smartphone called the HMD Hyper.
Looks-wise, the smartphone is quite similar to the Nokia Lumia-inspired HMD Skyline, which debuted last month. It has a flat display with large bezels and curved sides. The display will use an OLED panel, providing FHD+ resolution with a 120Hz refresh rate. Under the hood, it has a Snapdragon 6 Gen 1 processor, paired with 8GB RAM and 256GB storage. It is also said to come with a MicroSD card slot to expand storage.
For optics, the device is said to come with a 50 MP primary camera with optical image stabilization, paired with a 13 MP camera and an 8 MP camera. The tipster also claims that the device will have a 50 MP selfie camera capable of FHD video recording at 60FPS. The primary camera will allow for up to 4K video recording at 30FPS. It is also said to feature a 4,700mAh battery with 33W fast charging.
As per these details, the HMD Hyper will likely be a toned-down version of the HMD Skyline which features a 144Hz OLED display, with a 108MP primary camera and 50MP telephoto lens. The HMD Skyline also houses a slightly more powerful Snapdragon 7s Gen 2 SoC. The launch date of the HMD Hyper is still under wraps.
A known tipster has just revealed information regarding an upcoming smartphone that features Snapdragon 8 Gen 4. It seems that a brand is working on a new phone with Qualcomm’s next gen flagship and a curved display from BOE. While the name of this device is still unclear, this might be the OnePlus 13.
The news arrives from Digital Chat Station who shared this information on Weibo (a Chinese microblogging website). DCS claimed that a new Snapdragon 8 Gen 4 phone is in the works with a 2K quad curved display. This screen is a BOE 8T LTPO panel that houses an in-display ultrasonic fingerprint scanner. Apart from these display specs, the unknown phone is also expected to feature an IP68/IP69 rating for water and dust resistance.
In the comments section of this online post, Digital Chat Station stated that the OnePlus 13 will use a micro-curved screen and may appear similar to the Oppo Reno 12. Some of these are in line with our previous report. The OnePlus 13 is rumored to be one of the first to be equipped with the Snapdragon 8 Gen 4. DCS claimed last month that the new OnePlus flagship will be powered by a massive battery pack that is rated over 6,000mAh. However, rumors suggest that it may lack support for wireless charging.
Similarly, we also have some details regarding its camera systems. The device will have three 50-megapixel cameras. This will consist of a Sony LYT-808 primary camera, a Sony IMX882 camera for ultrawide shots, and another IMX882 camera for periscope zoom. All three sensors may have a 50-megapixel resolution and come with Hasselblad camera optimizations. So stick around for more as we will be providing updates when additional information surfaces online.
We have three earbuds from NOTHING, the NOTHING Ear, the NOTHING Ear 8, and the CMF earbuds by NOTHING. You know, NOTHING has always surprised by exquisite design, and this time they put the excellent design into the affordable models.
Nothing ear
So first , let’s unbox the Nothing Ear. This one is actually the third generation of the lineup, and I think it has improved a lot. But although you see that there are nothing, you know, quite improved in the design, but I still think this is very unique. And enough talking, let’s unbox this one.
Now let’s open the box. As you can see, the earbuds are in the center and let’s get it out. As for the accessories, nothing there. And I think it’s underneath here. Now we have four ear tips here, From small to large. And we have another C to C cable. This one is not transparent, but still, Very good looking, very aesthetically pleasing. It has a little Nothing logo on it. All right, let’s put it aside. right on the top, you can see that it can be paired up with the Nothing X app, which we will showcase later.
We have the CMF phone here, and we will try to pair this earbuds with the phone later. All right. All right, so this is the Nothing Ear and it is actually the third generation in the lineup. And I wouldn’t say they are that different in the overall design from the previous generations,but still very unique. And what we got here is the black one, I would call it. And the first thing I noticed is that there’s a dent here on top. And also there are two bumps at the bottom. So I think they are used to accommodate the unique shape of the earbuds.
For example, on the top, this thing will make sure that the earbuds stay in places, And these two bumps at the bottom is used to accommodate the special shape. And this one, I think, is a magnet to hold the case in place. Now let’s open it up. You know, whenever you open, you know, or try on some Nothing products, you always see the Nothing font because they are all over the website and all the, you know, marketing materials.
This one is no difference. For the earbuds themselves, you can see that they are also quite unique design and transparent shell and also black theme color.Right on the surface, you can notice two things. there are very few metal parts on the surface. Because they are transparent shell, you can always see the components inside. But generally, they are really good looking.
The second is that on the left, You will see that this one indicates that this is for the left ear and the red dot indicates that this is for the right ear. This is actually a very thoughtful design. To pair them up, there’s a white dot and a red dot in the case. So to make sure that you will never put them in the wrong place. This is actually a very thoughtful design. This is actually the first time I’ve tried them on.
So yeah, let’s put them on. All right. I think the wear and comfort is quite good because they are not long, they are not dragging your ears down,and also the stem is not in the way actually. And even they are not paired up with the phone, the noise cancelling is kicking in. Now let’s try to pair them to the app to see what will happen.
Once you take these earbuds out and you have the phone ready, they have the automatic connection. It will try to identify the devices near the phone. Let’s update later. Noise Control, and Bass Exchange. Let’s try the Noise Control. Right on the top, you can see that there are three modes to choose from. Noise Cancellation, and Off. And in Noise Cancellation, you can also try to set it into different modes, like High, or Adaptive. I will just leave it for the High for now.
Let’s try the transparency. When I set it to the transparency mode, there’s just a little notification. It’s not like a transparency, you know,the earbuds read to you transparency mode. It’s like a breathe, a breathe sound. It’s just like a very noticeable breathe sound, actual breathe sound to let you know you’re in the transparency mode. This is actually, Very fresh to me. I’ve never experienced that before. Very thoughtful design. Noise cancellation. another different sound to let you know you are in the noise cancellation.
So during the Limited time Deal, there’s a $40 off discount, so bringing the price to $119. I think it is a really good choice for, let’s say, It can really take down those high-end earbuds. So make sure you choose this one.
next up we have the Nothing Ear(a). This one is kind of an affordable option other than the Nothing Ear, the high-end one. But this one still keeps some of the iconic design and also some of the highlights or the special features for the Nothing Ear.Now let’s unbox this one. Still a simple strap here to unbox it. still the same box design as the Nothing Ear. the box is a little bit smaller, but still a boxy design. At the back, you can see this little metal hinge and Type-C port.
Let’s open it up. Right up, you can see that they share a very similar design with the nothing ear. And compared to that one, other than the difference in the cases, this one has moved the button inside the case. All right, let’s take them out.
you can see these transparent shell and I would say the difference between them is the dots, This one has theBlack at the left and red at the right side. first impression, I think they are the same. On paper, they both have 45 dB noise cancellation, and from my personal experience, I think they are the same.Other than the noise cancellation, the wearing comfort is still very good, so I wouldn’t complain about that. And other than these key features that you want from earbuds, they are the same.
There are maybe some sacrifices on the transmission protocols or some of the codec. If you truly want the high-end one, go for the nothing ear. But if you want that key feature fromWireless earbuds and you don’t want to pay such price for that. This one is also very good. Now during the prime day, this only cost you $79. So which is a really good deal. You have the iconic nothing design and also some of the key features. And if you’re willing to sacrifice a little bit on the sound quality, then this one is a really good choice.
All right, the CMF earbuds by Nothing. CMF is a sub-brand of Nothing. They focus on iconic or refreshing design while keeping the price relatively low.I like them a lot actually. Buy CMF Buds Here
So let’s check them out. okay now this is a very refreshing design because this is very orange i can say and it’s relatively small a little bit thick i would say but still you can hold it in hand very comfortably and this wheel is not meant for a press or anything rather you can rotate it like this and as you can seeThere are two holes here, And you can attach a lanyard here so you can hook it up on your neck and then you can go out. People can definitely recognize you on the streets.
All right, let’s open it up. All right, about the earbuds, they are not bulky at all and the refreshing color really represents your characters. And the beans here, I think they are quite similar to the nothing ears,but we will put them side by side to show you the difference. Now the print here, they are the same at the bottom here, as you can see. But on the top, as you can see, these are actually the touch area. On the left, it’s not a full dot, but on the right, it’s a full dot or let’s say this is a circle, this is a dot. So these are the touching areas.
And for the beans themselves, they are quite similar, Now let’s put them on to see the wearing comfort. I cannot feel anything wearing them. So now I’ve connected the earbuds to the NothingX app. And as you can see, there’s only one level of noise canceling in here, but you’re still not missing the transparency mode.
But for the noise cancellation capability, it claims to be 42 dB, so a little bit less than the 45 dB on the other models.In the environment I’m in right now, I cannot feel much difference between them, but maybe we can feel the difference when it is in theNoisy environments, but let’s leave it to the next time. Now about the wearing comfort is still really good.
I can assure you. And also let’s play some music to see how the sound quality is. after a few minutes with the earbuds, I think it has the best sound quality in this price range. Before trying on this, I was thinking that maybe it was just like those lousy earbuds that just have a really deep bass, but nothing else.
For this budget earbuds, I think it has the best value for money. All right, this is the unboxing and the first impression of these three buds. Nothing Ear, Nothing Ear A, and CMF earbuds by Nothing. I think they are positioned differently, but they also have the best sound quality and other capabilities in the price range.
Xiaomi launched its Smart Band 9 alongside the Xiaomi Mix Fold 4 and Xiaomi Mix Flip in China last month. After a teaser by Xiaomi Global yesterday, Xiaomi online store for the Netherlands has listed the Smart Band 9 online, confirming that it will be launching in Europe on August 16. It will be available for purchase in the Netherlands starting at 10 AM with a price tag of €39.99. It is also listed at the same price in other EU regions like Germany.
Xiaomi Smart Band 9 specs & features:
The Xiaomi Smart Band 9 features a 1.62-inch AMOLED display with a bright 1200 nits peak brightness. It offers a clear resolution of 192 x 490 pixels and a pixel density of 326 ppi. Users can choose from over 200 watch face designs. Some models also include NFC for contactless payments.
Designed for health and fitness tracking, the band includes sensors for heart rate, movement, and light conditions. It offers improved heart rate accuracy compared to its predecessor and supports over 150 workout modes. Additionally, the band can provide sleep cycle recommendations.
The 233mAh battery provides up to 21 days of battery life without the Always-On Display feature. A full charge takes approximately one hour. The band is water-resistant up to 50 meters and offers features like music control, message notifications, and weather updates.
Huawei has quietly refreshed its monitor lineup with a new entry – the MateView SE (2024). It succeeds the 2022 model with a notable update to the display specs. However, the overall experience remains familiar for those already using the MateView SE (2022). Let’s get into its details here.
Huawei MateView SE (2024) Specifications
The core design and 23.8-inch 1080p IPS panel of the latest MateView SE is the same as its previous counterpart. Huawei, nonetheless, has bumped the refresh rate from 75Hz to 100Hz. This could be a minor benefit for basic tasks like scrolling or navigating menus, but it won’t drastically impact gaming performance – especially considering the Full HD resolution.
For connectivity, the original MateView SE offered a VGA port alongside HDMI and DisplayPort. But Huawei opted to ditch the VGA port entirely in the 2024 iteration.
Since VGA is an outdated standard, and most modern computers and devices have switched to HDMI for audio and video, its removal is unlikely to be a concern.
The rest of the specifications remain largely the same. The monitor maintains its 250-nit peak brightness and 90% DCI-P3 color gamut coverage, which is decent for basic productivity tasks but falls short of high-end creative displays. The 5-way joystick control and TÜV Rheinland certification for low blue light and flicker-free operation also carry over.
Huawei throws in an “e-book mode” that adjusts the display to a monochrome color scheme for a more paper-like reading experience, potentially helpful for extended reading sessions.
Price and Availability
The MateView SE (2024) is available in China for a price of just CNY 569 (roughly USD 91). That price makes it a budget-friendly option. However, there’s yet to be a word on international availability.
Xiaomi has expanded its product lineup with the launch of its new 67W Desktop Fast Charging socket. Priced at 149 yuan (~ $20) with an introductory offer of 129 yuan (~ $18), the socket is now available across major e-commerce platforms in China including JD.com. Let’s look at what the adapter has to offer in terms of features.
Xiaomi 67W Desktop Fast Charging Socket Overview
Designed with simplicity in mind, the socket comes in classic black-and-white color options. It measures 46.5×105.0×42.0mm, the cable has a length of 1.5 meters, and the device features a flame-retardant polycarbonate shell for added safety.
The socket has two standard two-prong outlets and two five-prong grounded outlets that are capable of handling a maximum power output of 2500W. You can use them for your monitor, desktop, laptop, or any other high-power-consuming device.
For charging needs such as smartphones, tablets, or wearables, the socket includes four USB ports. Two of them are USB-C ports, each capable of delivering 67W fast charging. The other two are USB-A ports with a maximum output of 22.5W per port.
The power distribution between these ports gets a bit complex. While each USB-C port can deliver the full 67W on its own, combining them reduces the output to a maximum of 45W for one port and 20W for the other.
Similarly, combining USB-C with USB-A ports results in a 45W maximum for the USB-C and a lower 18W for the USB-A. All four ports used together are capped at a combined 15W.
There are also some caveats to be aware of. When charging a watch with USB-A ports, users might encounter a repetitive charging notification even after the watch is full. Xiaomi says this to a normal detection process and it should stop after half an hour. But it’s recommended to remove the device after charging.
The iQOO Z9s series is set to launch in India on Aug. 21. The landing page for the series has been live on the official website for the past few days. However, the updated page now reveals the key specifications for both smartphones in the series.
iQOO Z9s key specifications
IQOO Z9s Onyx GreeniQOO Z9s Titanium Matte
The iQOO Z9s will feature a 120Hz curved-edge OLED display, powered by the Dimensity 7300 chipset. It will come with a 5,500mAh battery, but the company did not share the fast-charging capabilities of the Z9s.
On the rear, it will sport a dual-camera setup, including a 50-megapixel Sony IMX882 sensor with OIS, paired with a 2-megapixel portrait lens, accompanied by a ring LED flash.
It will have an IP64-rated chassis with a slim profile of 7.49mm. The device will be available in Onyx Green and Titanium Matte colors.
iQOO Z9s Pro key specifications
iQOO Z9s Pro Flamboyant OrangeiQOO Z9s Pro Luxe Marble
The iQOO Z9s Pro, on the other hand, will also feature a 120Hz curved-edge OLED display with a local peak brightness of 4500 nits. The Snapdragon 7 Gen 3 chipset will power it, and it will house the same 5,500mAh battery with support for 80W fast charging.
Like the Z9s, the Pro version will have a 7.49mm thin profile, an IP64 rating, and an OIS-enabled 50-megapixel Sony IMX882 primary camera with a ring LED flash. The inclusion of the 8-megapixel ultra-wide camera sets the Pro model apart from the standard edition. Furthermore, the Z9s Pro will be available in Flamboyant Orange and Luxe Marble colors.
The Z9s and Z9s Pro will offer camera features such as 4K OIS video recording, AI Erase, and AI Photo Enhance. Both devices are expected to run on Android 14 and FunTouch OS 15.
iQOO Z9s series price in India (expected)
Given the features and specifications, it seems that the iQOO Z9s may be priced between Rs 20,000 (~$240) and Rs 25,000 (~$300), making it a competitive option in its segment. The iQOO TWS 1e will also debut alongside the Z9s series. Readers can visit this post to learn about the TWS 1e.
On Aug. 21 in India, iQOO will unveil the iQOO Z9s and Z9s Pro smartphones. Today, the brand confirmed that the iQOO TWS 1e, which will be its first TWS earbuds for the Indian market, will also launch alongside the Z9s lineup. The brand released the following image to confirm the design of the earbuds. To learn what to expect from the product, continue reading ahead.
iQOO TWS 1e design
iQOO TWS 1e
The iQOO TWS 1e poster confirms its support for active noise cancellation (ANC). In addition, the image reveals that it will sport a black-yellow dual-tone design.
iQOO TWS 1e specifications, price (expected)
The iQOO TWS 1e was announced in December 2023 in China. The device, priced at 169 Yaun (~$23), is available in Mecha White and Star Yellow in the home market. There is no clarity on whether the white variant of the TWS 1e will be available in India. The pricing is likely to be under Rs 2,000. This indicates that it may rival the Poco Buds X1, which recently debuted in India.
The iQOO TWS 1e wireless earphones sport a design similar to Apple AirPods, featuring in-ear buds with silicone tips. Equipped with 11mm drivers, these earbuds connect via Bluetooth 5.3 and support various sound effects, including DeepX 3.0 stereo, 3D panoramic audio, and Monster Sound for gaming.
The earbuds are IP54-rated, offering splash resistance, and come with touch gesture controls. They pair effortlessly with Vivo and iQOO devices, providing a low latency of up to 55ms, making them ideal for gaming. Additionally, they feature intelligent active noise cancellation (ANC) for media playback and AI noise reduction for calls.
The iQOO TWS 1e can last up to 44 hours on a full charge when used with the charging case, with ANC turned off. On a single charge, the earbuds alone can operate for up to 11 hours.
Several reports have claimed that the Oppo’s upcoming Find X8 lineup will comprise three models, the Find X8, the Find X8 Pro, and the Find X8 Ultra. The Ultra variant, which is expected to feature the Snapdragon 8 Gen 4, may debut in January 2025. However, the X8 and X8 Pro are expected to launch in October. Today, the tipster released the following Weibo to share some details about the Find X8 and X8 Pro.
Oppo Find X8, X8 Pro key specifications (rumored)
According to the tipster, the displays of the Find X8 and X8 Pro will support a 1.5K resolution, and both phones will be powered by the Dimensity 9400 chipset. Notably, the Vivo X200 series is also expected to feature the same chipset. It seems that the X200 series will debut as the world’s first Dimensity 9400-powered phone, with the X8 series launching shortly after.
Both smartphones will feature a periscope telephoto lens. However, according to previous leaks from Digital Chat Station, the X8 Pro is expected to have a quad-camera setup, including dual periscope telephoto cameras.
Both devices will be equipped with a silicon-based large battery. An earlier leak suggested that the Find X8 will be powered by a 5,600mAh battery, while the X8 Pro will have a slightly larger 5,700mAh battery. While the tipster did not mention it, the series will likely run on Android 15 and ColorOS 15.
It appears that the Find X8 and X8 Pro will have a glass body. The leak states that both phones will come in shades, such as black, white, blue, and pink. However, the Pro model will not be available in pink.
As far as the Ultra model is concerned, it is expected to feature a 2K display, a 6,000mAh or 6,200mAh battery, and carry support for satellite connectivity.
Google has announced that later today (August 13), it will host its annual “Made by Google” launch event to unveil new hardware, which will include the Google Pixel 9 series smartphones. Here’s how you can watch this launch event.
When is the Pixel 9 series launch event?
The event will kick off at 10 AM PT (1:00 PM EST/7:00 PM CEST/10:30 PM IST/6:00 PM BST) and will be live-streamed via YouTube.
Google Pixel 9 series launch event: What to expect?
So far, we know that Google plans to launch the Pixel 9 series smartphones, which include the Pixel 9, Pixel 9 Pro, Pixel 9 Pro XL, and the Pixel 9 Pro Fold. Additionally, we also expect the launch of the Pixel Watch 3 and the Pixel Buds Pro 2.
The new Pixel smartphones will be powered by the Tensor G4 SoC, which has around an 11% improvement in single-core performance and a 3% improvement in multi-core performance. The chip will also feature the new Exynos Modem 5400, adding satellite connectivity support and improving efficiency, with up to 50% better power consumption compared to the Exynos Modem 5300 found in the Pixel 8.
The Pixel 9 lineup will include two new entries this year in addition to the vanilla and Pro models. These will be the Pixel 9 Pro XL, which as the name suggests, will come with a large 6.8-inch OLED display, and the Pixel 9 Pro, which will be the successor of last year’s Pixel Fold, although with a larger and slimmer design compared to the original.
Xiaomi is expected to announce the Xiaomi 15 and 15 Pro are the world’s first phones powered by the Snapdragon 8 Gen 4 chipset in October in China. Rumor has it that Redmi will introduce the Redmi K80 and K80 Pro, equipped with the Snapdragon 8 Gen 3 and 8 Gen 4 chipsets, respectively, in November in China. Today, tipster Digital Chat Station released a Weibo post to reveal key information about the alleged Redmi K80 Pro.
Redmi K80 Pro key specifications, design (rumored)
The above leak indicates that the Redmi K80 Pro will feature a flat OLED display with a single punch-hole and thin bezels. Previous reports claimed that the screen would support 2K resolution and integrate an ultrasonic in-screen fingerprint sensor.
Under the hood, the Redmi K80 Pro is expected to feature the Snapdragon 8 Gen 4 chipset. The back panel of the phone will have a triple camera setup comprising a 50-megapixel primary camera with a large sensor and a telephoto camera. Previous reports have claimed that it will be a 50-megapixel telephoto lens that will support 3x optical zoom.
The tipster added that the K80 Pro will have a round camera module positioned in the upper left corner. Unlike the K70 Pro, the K80 Pro’s camera module will not have decorative studs. Talking further about the design, the tipster said the Redmi K80 Pro will have a glass back and a metal middle frame.
The tipster did not say anything about the battery capacity of the alleged Redmi K80 Pro. Back in May, the tipster claimed that it would have a 5,500mAh battery. However, a contradictory leak from a different source that surfaced last month suggested that it may pack a 6,000mAh battery. It is also expected to support 120W fast charging.
Portronics has recently introduced its first vacuum cleaner, the Mopcop, expanding its product range into the home appliance segment. The Mopcop is positioned as an affordable and efficient alternative for those looking for a better solution than traditional brooms but without the high cost of large cleaning appliances. This portable vacuum cleaner stands out with its compact and cordless design, making it a practical choice for everyday cleaning needs.
Portronics Mopcop vacuum cleanerkey features
Portronics Mopcop Portable Vacuum Cleaner
One of the key features of the Mopcop is its powerful 8000Pa suction, which ensures thorough cleaning across various surfaces. Whether it’s car interiors, carpets, upholstery, or hard floors, the Mopcop is equipped to handle various cleaning tasks. The inclusion of multiple nozzles enhances its versatility, allowing users to clean different areas more effectively.
In addition to its cleaning efficiency, the Mopcop is designed with health and sustainability in mind. It features an eco-friendly HEPA filter that traps dust and allergens, preventing them from being released back into the air. This is particularly beneficial for individuals with allergies or respiratory issues. The filter is both washable and reusable, contributing to the device’s eco-friendliness and ease of maintenance.
The Mopcop is also built with user convenience in focus. It includes a built-in LED flashlight, which is useful for cleaning dark or hard-to-reach areas, such as under furniture or in corners. The vacuum cleaner is powered by a long-lasting, rechargeable battery, offering extended cleaning sessions without the need for frequent recharging. This feature, combined with its cordless design, makes the Mopcop easy to use and manoeuvre.
Portronics Mopcop vacuum cleanerprice in India, availability
For those interested in purchasing the Mopcop, it is available at an introductory price of Rs 1,399 (~$16). The product can be bought directly from the Portronics official website and is also available on major e-commerce platforms such as Amazon India and Flipkart and in select offline stores. The vacuum cleaner comes with a 12-month warranty, providing users with added peace of mind.
Last year, Xiaomi unveiled the Xiaomi Pad 6 series of flagship tablets. Hence, the brand is expected to unveil the Pad 7 lineup this year. A new leak, courtesy of tipster Digital Chat Station, suggests that Xiaomi’s sub-brand Redmi is also working on a flagship tablet. Here’s a look at what the tipster shared about the Redmi tablet.
Redmi’s performance-driven tablet is launching next year
The leaker has handled two upcoming tablets from what appears to be from the Xiaomi camp. One is a regular, large-sized flagship tablet, previously mentioned to feature an OLED display with a matte soft light screen and a square-shaped rear camera module positioned at the top left.
Additionally, a sub-brand is prototyping a high-performance, smaller tablet that will likely launch next year. The former appears to be one of the Xiaomi Pad 7 series tablets, whereas the latter seems to be a Redmi product.
It appears that the Xiaomi Pad 7 series will focus on offering a premium experience in departments like display and design. On the other hand, the Redmi’s compact tablet will be a performance-oriented device.
The tipster revealed in the post’s comments section that the Redmi tablet will feature an LCD panel. The product is currently in the prototyping stage, a process that involves creating a functional model for testing and refinement prior to mass production.
At present, there is no information about the moniker or specifications of the Redmi tablet. Currently, the Redmi Pad Pro 5G, equipped with the Snapdragon 7s Gen 2 chipset, is the most powerful tablet from the Redmi brand. It remains to be seen whether the compact, performance-driven tablet will be called the Redmi Pad Pro 2 or something else.
In today’s roundup, we talk about HyperOS 2.0 software optimizations, product comparisons, upcoming launches, and exciting leaks that highlight the ongoing evolution in the tech industry.
Motorola’s Budget Offerings: Get a comprehensive comparison of Motorola’s sub-20K smartphones in India. We’ll break down the features of the Moto G85 5G and Edge 50 Fusion to help you make an informed decision.
Redmi Turbo 4 / Poco F7 Leaks: Uncover the preliminary details of Redmi’s upcoming device. We’ll speculate on what these early leaks might mean for the final product.
Plus, don’t miss our roundup of other exciting stories, including iQOO’s upcoming launches, Realme’s groundbreaking charging technology, Huawei’s rumored under-display face recognition, and OnePlus’s potential ceramic build!
Xiaomi is working to address problems in the upcoming HyperOS 2.0 update. Industry insiders reveal that the company is investing significantly in optimizing the operating system to provide a smoother and more responsive user experience.
Motorola has been quite active in the Indian smartphone market, especially in the under 20K segment. The recent launches of Moto G85 5G and Edge 50 Fusion have added to the company’s portfolio, offering consumers a range of options to choose from. Let’s break down these two models to help you decide which one suits your needs best.
OnePlus has confirmed the launch of their next flagship earbuds, the Buds Pro 3, arriving in India and other markets on August 20th. The launch event will kick off at 6:30 PM IST (9:00 AM EST, 2:00 PM BST, 3:00 PM CEST).
A recent development revealed that the brand is also working on the Redmi Turbo 4 for the home market. A few preliminary details about the screen resolution and the build of the device emerged well before its launch, which is expected to happen next year.
Hohem has been dedicated to making gimbals for filming devices for many years, and previously we have reviewed many of them, overall they are great for everyone, whether you are a professional photographer, or you are just a novice who wants to make better videos with your phone. And when AI started to help with a lot of the tech right now, the gimbal category evolved again. This time we have the newest Phone gimbal from Hohem, the iSteady V3, it has 3-axis stabilization, a Detachable remote control, and most importantly, a magnetic AI tracker to always keep the focus on you. It is only $129, it is a great price for what it can offer, and most likely it is better than others. In this review, we will use an iPhone and Android phone to test its performance of it, hopefully you can have more insights into it.
Unboxing
First of all, the packaging is nice, firmly packed everything inside, and the tape is very easy to be removed, leaving one less job for you to do. There are two colors to choose from, Black and White, either way it is still a good-looking device.
In the package, you have the device, charging cable, a tool, a pouch, and manuals. Fairly simple, but the pouch is a nice touch, since the device is very portable, if you tend to put it in your pocket with other stuff, then a pouch can separate them well. The whole unit weighs about 426g, still quite a manageable weight, and also it says a little about the device that it is built with a better material.
Design & Build
Once you hold it in hand, you can feel the weight and build quality of this device, but it is still a palm size. If we put these two colorways side by side, I would say the white one looks more aesthetically pleasing, as the white, orange and metallic blend better together. One thing to note here is that, the metal axis in the middle is colored differently, to match themselves up with these two colors.
Design-wise, this is a typical phone gimbal, shaped just like a shrank version of the professional camera gimbal, so you can do a lot of moves with perfect stabilization, while maintaining a pocketable size. Especially if you have a high-end phone with really good videography capability, and you want to utilize it to shoot very good videos, but one thing those phones can’t do is have good stabilization. So this is when a gimbal comes into play.
So other than the typical gimbal structural parts, there are two things that are very unique, which are the AI tracker and the removable remote control.
The AI tracker can help with all the AI-enabled tracking feature, while you are using the phone’s built-in camera app. The tracker has two key parts, a camera and a fill light, they are the perfect combo for selfies. The unit attaches to the body by magnet and two little hooks, the pins help with the power and feature fulfillment, quite an innovative design.
The remote control is another good design, it also connects to the gimbal through magnets and pins. When it’s on the gimbal, it serves as the control panel, and once it’s not on it, it connects to the gimbal by Bluetooth, that way you can do some filming from a distance. This little piece is very light and small, I wish it had a bit more weight or provided more grip, so if you hold it, it feels more secure.
Other parts are also made with thoughts and quality. Such as the rubber grip at the front, provides a good comfort for you to hold it tight. The axis in the middle is a solid piece of metal, supporting every move very well. The other metal part is the tripod feet, although they look thin, they are actually very strong. The phone holder on the top also has some rubber inside, so your phone will be scratched. If the shooting scene requires you to have extended range, then the built-in stick can do the job well.
One thing you should pay attention here, is since it takes a bit of effort to put the phone on the gimbal, it is recommended to turn on the device after putting the phone on the gimbal, or if you grab the upper part to do it, the bottom part will be spinning, and if you have the tripod out already, you may get hit by it.
Let’s get into the AI tracking feature first. In normal-use scenarios like tracking casual movements of a person or some objects, it can pretty much do the job really well. In tracking a person’s move, once it’s locked in the mode, it will never lose focus, even if you go at a distance, it will always be in focus; if you hide behind something and then pop out, it will still regain the focus instantly. We also tested its capability in a sports situation, once you turn the tracking speed to high, it can keep up with the paces really well.
video quality has been moderatedvideo quality has been moderatedvideo quality has been moderated
During the time trying out the tracking feature. Here are some insights we’d like to share:
The gesture control can only be activated at a certain distance, it claims 1.64-4.92ft(50-150cm), which means you can not be too close to the camera, or too far from the gimbal camera. In the real test, the minimal distance is just like it says, but the longest distance we tested was about 10ft (300cm), this is a performance beyond our expectations. We also tried to cover the camera on the phone to see if the gimbal have utilized that one to do the job, but it turned out that it does not, which means it is the camera on the gimbal doing an excellent job.
To activate the tracking feature, you should put your hand just next to your face, and your face should be in the frame, if these requirements are not met, then it can not be activated
If you want to track some objects, or an animal, you need to manually select it in the frame to be able to do that, whether on your rear camera or front camera.
The tracking works well on both iPhone and Android phones.
Stabilization
The stabilization algorithm of Hohem has been evolving, and it’s the 8th gen now, I must say it is working really well, not just in the user experience, but also in the speed and accuracy. There are several modes to choose from, to support very slow movements, or really quick movements like some sports scenes. When it’s moving, it does not wobble or anything, even with the heavy iPhone 15 Pro Max on it. So you can really trust the performance out of it.
Fill Light
The other feature built into this tracker unit is the fill light. You can turn it on or off by long pressing the wheel at the side, then double press to change the color temperature, and scroll the wheel to get the right brightness. Once the remote control is detached from the body, you can also use that to adjust the settings, but it seems that it can only change the color temperatures, but not the brightness. There are three color temperatures, you can choose between warm, medium, and cold, to adapt itself to different situations. This can be a really good tool to use for selfies.
Remote Control
Now let’s talk about the detachable remote control. When it is on the device, it is the control panel, but when it is detached from the device, it can work remotely. There are several buttons and a small screen on it. On the screen, you can confirm whether it is connected to the device or not by checking on the Bluetooth icon, and the icons below that one will tell you what mode it is in, then the battery indicator at the bottom. Just on the screen, there are two buttons for you to change the brightness of the fill light. On the right side, there is a joystick button for you to control the movements of the gimbal, and there is the pattern on it for better grip. Moving down, there is the Mode button and record button, they work seamlessly with the device, simply double press or click to toggle through different functions. There is also another button at the side to enable you to do some other stuff, you can read the manual to get to know more, along with some other controls of the remote. So overall, this remote is such a versatile tool, it makes a lot of shots available if you are shooting things alone, or you want some creative shots to be made.
Other Features
Some other features that worth mentioning about this gimbal.
The tripod stands are quite useful when you are shooting videos from a distance, they blend into the tripod without you even noticing them, but they are really firm when the device is on an even table.
The 1/4″-20 Screw mount and the extended stick can make more shots possible.
It claims 13 hours of use when the gimbal is standing on the ground, and 4 hours with all the functions running. In our tests, we did not get to drain the battery though, but such battery life is good enough to support any shooting needs, and you can always charge the gimbal through the type-c port at the side.
Verdict
So these are the features and our experience with the Hohem iSteady V3 Smartphone Gimbal, it is such a versatile tool to use, the AI tracker and remote control are the highlights of this device. You can do a lot of creative things with this device, if you are an individual filmmaker, or livestreamer, this can help you a lot. And if you are looking for your first smartphone gimbal, this is also the best choice.
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
