Realme 12 Pro Plus vs Galaxy S21 FE: Specs Comparison

By

-

Mar 13, 2024

Realme 12 Pro Plus: January 29, 2024

Samsung Galaxy S21 FE: January 7, 2022

SPECS TABLE

	Realme 12 Pro Plus	Galaxy S21 FE
Price	$349	$193
Display	6.7-inch AMOLED screen	6.4-inch Dynamic AMOLED screen.
Refresh rate	1 – 120Hz adaptive	1 – 120Hz adaptive
Rear cameras	50MP main wide (f/1.8), 64MP periscope telephoto (f/2.8), 8MP ultrawide (f/2.2).	12MP wide (f/1.8), 8MP telephoto (f/2.4), 12MP ultrawide (f/2.2).
Front camera	32MP (f/2.4)	32MP (f/2.2)
Chipset	Snapdragon 7s Gen 2	Qualcomm SM8350 Snapdragon 888 5G or Exynos 2100
RAM	8GB, 12GB	6GB, 8GB
Storage	128GB, 256GB	128GB, 256GB
Battery	5,000 mAh	4,500 mAh
Charging	67W wired	25W wired
Water/dust resistance	IP65	IP68
Size	161.5 x 74 x 8.8 mm (6.36 x 2.91 x 0.35 in)	155.7 x 74.5 x 7.9 mm (6.13 x 2.93 x 0.31 in)
Weight	196g (6.91 ounces)	177 g (6.24 oz)
Colors	Midnight Black, Aurora Purple (Coral Purple), Ocean Teal, Arctic White	White, Graphite, Lavender, Olive

Realme 12 Pro Plus vs Galaxy S21 FE comparison table

Sometimes, when purchasing a used device, it’s best that you go for the older options. In this article, we will pit a new and an older Android midrange device against each other, the Realme 12 Pro Plus vs. the Galaxy S21 FE. At the end of this article, you’ll get enough information to help you make the right choice when shopping for either of these devices.

While the majority of buyers might choose the S21 FE over the option from Realme, there are a few things to take in mind. There are some notable areas where the Realme 12 Pro Plus outshines the S21 Fe and vice versa. But which is a better buy? Let’s now weigh the two options side by side.

Realme 12 Pro Plus vs Galaxy S21 FE: Price

Realme 12 Pro Plus

Samsung S21 FE 5G

Realme 12 Pro+ 5G Submarine Blue, 12GB RAM, 256GB Storage

Samsung Galaxy S21 FE 5G (Graphite, 8GB, 128GB Storage)

₹ 32,990

₹ 32,998

Check Price on Amazon

Realme 12 Pro Plus

₹ 32,990

Check Price on Amazon

Samsung S21 FE 5G

₹ 32,998

Check Price on Amazon

Please Note: When you buy something using the links in our articles, we may earn a small commission at no cost to you.

Realme 12 Pro Plus vs Galaxy S21 fe: Design and Colors

Realme 12 Pro Plus:

Looking at the design of this smartphone, it’s easy to say that the design team at Realme did a great job. The back panel of this device comes with an impressive finish and a distinctive stripe that runs down through its middle. Its flat edges add a bit of flare to its design, giving onlookers something to gaze upon.

Being a newer design, its design is far more aesthetically pleasing than the Samsung Galaxy S21 FE, as this device was launched about two years ago. For most users, the curved screen on the Redmi Note 12 Pro Plus gives it an edge over its rival in this article. The color options on the Realme 12 Pro Plus are also quite impressive and pair well with the contrasting stripe that runs down the device’s rear panel.

Galaxy S21 FE:

At this moment, it is easy to say that the design of this device has fallen into the shadows considering its age and the design upgrades Samsung now offers its buyers. But one fact remains that the Samsung Galaxy S21 FE is a very simple device that suits those who don’t want something shouty. It features the design that was launched with the Samsung Galaxy S21 series.

However, the Galaxy S21 FE does things a little differently from the other S21 devices. It’s a bit more subtle, replacing the metal camera cutout on its siblings with a plastic cutout. Its flowing design makes it easy to grip as well, and its color options are eye-catching and impressive.

Major differences:

A more impressive design on the Galaxy S21 FE.
Curved screen display on the 12 Pro Plus.
Lots of shiny metal parts on the Realme 12 Pro Plus.
More modern design on the Realme 12 Pro Plus.
Simple design approach on the Samsung Galaxy S21 FE.

realme 12 pro plus vs galaxy s21 fe: Display

Realme 12 Pro Plus:

The curved screen approach to devices is not one that everybody likes, but it sure is good-looking, however, this device’s display is not all about looks. This device features an AMOLED screen panel that maxes out at 950 nits of brightness. Gamers and other power users will be able to benefit from this device’s 120Hz refresh rate as they scroll about various actions on the device. With its 6.7-inch size, this will be classified as a large-screen device, and that is something that some users fancy.

Galaxy S21 FE:

Coming from Samsung, you can only expect the best out of this device, despite it being older than the Redmi Note 12 Pro Plus. It features a dynamic AMOLED screen display panel with HDR10+ technology for a better viewing experience. Just like the competing device in this article, the Galaxy S21 FE supports a 120Hz refresh rate and is also great for gaming and other activities. This device comes with a smaller 6.4-inch screen display, which some might consider to be the start of the contact screen device category.

Major differences:

The 12 Pro Plus comes with a curved screen.
12 Pro Plus comes with a larger screen size.
Samsung Galaxy S21 FE comes with a smaller, compact display size.

Realme 12 Pro Plus vs Galaxy S21 FE: Cameras

Realme 12 Pro Plus:

This device packs a ton of photography and videography features that can match up with other devices at its price point. There are three rear cameras mounted on this device, all working together to deliver a very impressive photo or video. It has a main 50MP camera, a 64MP, and an 8MP camera for taking ultrawide shots and 4K video recording. Up front, this device has a 32MP sensor, but powering it photography and videography experience is the processor that lies under this device.

Galaxy S21 FE:

Just like the competition, this is an impressive camera device that packs three rear cameras and one front-facing camera. On the rear, this device features a 12MP main sensor, an 8 MP telephoto, and a 12 MP ultrawide sensor and on its rear cameras, this device can record 4K videos. For its selfie lens, this device comes with a 32MP sensor that also shoots 4K videos, unlike the competition in this article. These cameras are supported by a one-time flagship-level processing power, which makes images taken on this device stand out.

Major differences:

A 50MP main camera is on the Realme 12 Pro Plus.
No 4K video recording on the front-facing camera of the Realme 12 Pro Plus.

Realme 12 Pro Plus vs Galaxy S21 FE: Performance

Realme 12 Pro Plus:

For its performance abilities, this device features the Snapdragon 7s Gen 2 processor and the Adreno 710 chipset. Joining this processor is up to 12GB worth of RAM capacity, buyers can also get this device with a more affordable 8GB RAM configuration. Storage here goes up to 512GB on the 12GB RAM configuration, and those getting the 8GB option can go with a 128GB or a 256GB storage option.

Galaxy S21 FE:

There are two processor options for this device and each offers good performance, but one wasn’t the best pick for most buyers. The options on this device are the Snapdragon 888 5G processor and the Exynos 2100 with the latter not being the best pick for most buyers when this device launched. Memory on this device goes up to 8GB, and users can settle for the 6GB option as well. Storage here is 128GB or 256GB available on both memory options.

Major upgrades & differences:

More storage options on the Realme 12 Pro Plus 12GB RAM option.
Two processor options on the Samsung Galaxy S21 FE.

Realme 12 Pro Plus vs Galaxy S21 FE: Software

Realme 12 Pro Plus:

This device runs on Android 14 out of the box with software customization from the Realme UI 5.0 software. For software support, this device will keep getting updates for up to three years after it launches this month. Users will be able to stand out thanks to the Realme UI software that this device will be available with.

Realme 12 Pro Plus:

This affordable device from Samsung launched with Android 12 out of the box and One UI software for customization features. Over the years, this device has got a ton of updates and is now running Android 14 and One UI 6. This device is eligible for a few more OS updates before we can close the curtains on its existence.

Major differences:

Realme UI on the Realme 12 Pro Plus and One UI on the Galaxy S21 FE.

Realme 12 Pro Plus vs Galaxy S21 FE: Battery life and charging

Realme 12 Pro Plus:

This device comes with a 5000mAh battery capacity which will be able to carry it through the day on a single charge. It also supports 67W fast wired charging, which is great for users who want to charge up their device while on the go. Sadly, this device doesn’t feature wireless charging as some might want it to,

Galaxy S21 FE:

A smaller 4500mAh battery is available on the Samsung Galaxy S21 FE, this capacity is still okay for everyday usage. For its fast charging, this device supports 25W fast wired charging and 15W fast wireless charging. With this device, users can benefit from its reversed wireless charging to power their accessories wirelessly.

Major differences:

Faster charging on the Realme 12 Pro Plus.
Bigger battery on the Realme 12 Pro Plus.

Realme 12 Pro Plus vs Galaxy S21 FE: Final Verdict

If you are going for a close flagship experience with your device, then the Samsung Galaxy S21 FE might give you that. However, the Realme 12 Pro Plus is a solid flagship device killer, and it packs a punch in terms of its performance. Since the Realme 12 Pro Plus is a newer device, it brings a newer processor as well as other newer components.

In terms of design, the new Realme 12 Pro Plus is a better pick, but for a touch of simplicity the Galaxy S21 FE does it better. You can also expect better performance from the Realme 12 Pro Plus, as well as a more solid battery life and faster charging speeds. So which is it going to be for you, the new gods or the old gods?

Samsung Galaxy Ring Production Details, Potential Sale Dates Tipped

By

Viraj Gawde

-

Mar 13, 2024

A new report out of South Korea reveals the production capacities of the Samsung Galaxy Ring. The wearable device which was first showcased in January is slated to launch in the second half of this year. It has already garnered a lot of interest. A host of details about the Galaxy Ring have also been confirmed.

Samsung Galaxy Ring production details revealed

The Elec reports that Samsung is aiming to produce 400,000 units initially of the Galaxy Ring. This is to meet the demand as per the South Korean brand’s expectations. The estimate is quite ambitious since smart rings have recently started gaining traction. Mass production of the wearable device is set to commence in May.

The report also adds that Samsung will be able to keep up if the demand surpasses their expectations. It will ramp up production due to the small form factor and the absence of any ongoing part shortage. The Galaxy Ring is expected to debut in late July or early August at an Unpacked event that focuses on next-generation foldables, tablets, and smartwatches. The publication also reveals that sales could begin sometime in August.

So far, Samsung has confirmed that the Galaxy Ring will be available in nine different sizes, three colour options, and will pack a battery life of nine days. The smallest size will have a battery cell of 14.5mAh whereas the largest model will be backed by a 21.5mAh unit. Apart from Samsung devices, it will also be compatible with other Android phones but won’t work with iOS.

Related:

Source

Realme Buds T110 spotted on SIRIM certification website, could launch soon

By

Sudhanshu

-

Mar 13, 2024

Realme has teased a new color Dome Green variant for its Buds T300 TWS earbuds, which it plans on launching alongside the Narzo 70 Pro 5G smartphone on 19th March 2024. Apart from that, a new certification listing for the Realme Buds T110 has now surfaced online.

The Realme Buds T110 has been spotted on Malaysia’s SIRIM website (via TheTechOutlook) with model number RMA2306. Although the certification does not reveal much in terms of specifications, it does indicate that the Buds T110 could soon launch in Malaysia. While we wait for more details, we can look at its predecessor, the Realme Buds T100, also known as the TechLife Buds T100, to get an idea of what to expect.

Realme Buds T100 specs:

The Buds T100 TWS earbuds feature 10mm drivers with a specialized composite diaphragm for enhanced bass. They also include AI ENC for better call quality by reducing background noise. With a dedicated low latency mode and support for Google Fast Pair, they offer smooth connectivity.

As per official claims, the buds provide 6 hours of playtime, with an additional 28 hours from the charging case. Fast charging provides 2 hours of playback with just 10 minutes of charge. They are IPX5 water-resistant and equipped with Bluetooth 5.2 for connectivity.

RELATED:

(via)

A new Huawei Watch, likely the Watch Fit 3, passed the CQC certification

By

Debasish

-

Mar 13, 2024

Huawei teased the Watch Fit 3 quite a while ago on July 17 last year noting “revealing soon“. Now a smartwatch model noted as SLO-B19 has recently passed CQC product certification, which is expected to be the Huawei Watch Fit 3. Certification information reveals that this watch will have audio storage and playback functions. Additionally, Huawei followed the trend of not including a charger for this upcoming watch. It has been reported that Huawei could launch the Watch Fit 3 at the Huawei P 70 series launch event.

What to expect?

Not much is known about the upcoming watch at this point. The company launched the Huawei Fit 2 with a rectangular 1.74-inch AMOLED display with a resolution of 336×480 and a pixel density of 336PPI. It offers an always-on display and a water resistance of up to 50 meters. Its health tracking features include a heart rate sensor, blood oxygen monitoring, sleep tracking, etc. For connectivity, the device is equipped with Bluetooth 5.2 and NFC. For power, Watch Fit 2 comes with a 292mAh battery that is rated to last 10 days in typical usage. This device was priced at 799 Yuan, which is currently relative to 110 USD.

Notably, the Huawei Watch Fit 3 is expected to equip a heart rate monitor and a SpO2 sensor. The Watch Fit 3 will also reportedly get 97 different workout modes alongside offering the traditional sleep pattern and stress level tracking features.

However, the P70 series’ launch event, where we are expecting the revelation of the Watch Fit 3, has reportedly been delayed. A reliable tipster Digital Chat Station reported that the launch event, which was initially expected to be held this month, has been postponed. Stay tuned as we will update as more information about the upcoming products comes out.

Related:

Oppo India brings instant smartphone support with digital self-help assistant

By

Sean

-

Mar 13, 2024

Oppo has just announced a brand-new service to improve the after-sales experience on its smartphone for its customers. The company is bringing a digital self-help assistant that enables instant smartphone support. So here’s everything you need to know.

Oppo India Digital Self-Help Assistant

Oppo India unveiled this new service on World Consumers Rights Day. The new digital service basically lets customers resolve issues related to their smartphones without having to physically go to a service center. As per official notes, this is a first-of-a-kind initiative in India and is available for all Oppo smartphones, meaning your A, F, K, Reno, and Find series are eligible for this service. This program is also in line with the Indian Government’s “Right to Repair” drive.

According to Savio D’Souza, Director of Product Communications at OPPO India, “Indian consumers are very tech-savvy, and this portal provides users with all the information they would need to troubleshoot their OPPO smartphones without making a trip to the service centre. With the Self-Help Assistant, OPPO makes things simpler for consumers; this initiative is about empowering them and enhancing their experience of owning an OPPO device.” To get access to this service, Oppo smartphone owners simply need to head to Self-Help Assistant on the official Indian website.

One can even go to the MyOppo app and click on the Support Tab to access the Self-Help Assistant. Consumers can then select their device from the menu and pick between Troubleshooting and Simulation options. The latter offers over 400+ settings and functions to test the Camera, Memory, Recording, Backup, Wi-Fi, Hotspot, and more. This setting also brings a digital step-by-step guide as well. Meanwhile, Troubleshooting can help resolve software issues that are related to data and networks. Oppo will even bring multilingual support and integrate IoT products in the next phase.

RELATED:

U.S. license policy to Intel and AMD sparks debate: Huawei’s Chip supply hangs in the balance

By

Joane

-

Mar 13, 2024

The ongoing tussle between major chip manufacturers and the U.S. government has thrown Huawei’s chip supply into uncertainty. Intel, amidst mounting pressure, retains its license to sell advanced laptop CPUs to Huawei, while its rival AMD finds itself caught in bureaucratic limbo. These developments not only shed light on the intricate dynamics of U.S.-China tech relations but also underscore the economic stakes at play.

Since the Trump administration’s decision in September 2020 to grant Intel a license to continue supplying chips to Huawei, the industry landscape has been marked by intense competition and political maneuvering. AMD’s efforts to secure a similar license hit a dead end, leaving the company grappling with a significant revenue disparity estimated at over $512 million.

The disparity in licensing treatment has not gone unnoticed. AMD’s claims of unfair treatment have been bolstered by industry skeptics and political figures like Republican Senator Marco Rubio, who have urged the Biden administration to reassess the situation. Despite these calls, government officials have remained tight-lipped, leaving the fate of Intel’s license uncertain as it approaches expiration later this year.

Huawei, a key player in the global laptop market, faces the brunt of these regulatory uncertainties. With the majority of its CPUs still sourced from Intel, any further limitations on chip sales could spell trouble for the company’s laptop offerings, according to analysts. The Chinese tech giant’s growing market share, particularly in its home country, hinges on its access to Intel chips, making the outcome of these deliberations critical for its prospects.

The complexities of the situation extend beyond AMD and Intel, impacting other chip makers like Qualcomm and MediaTek. While Qualcomm managed to secure a license to power Huawei’s smartphones, Mediatek faced a setback when its application was denied, resulting in a sharp decline in sales.

As the industry braces for potential policy shifts, Microsoft’s recent collaboration with Intel for chip manufacturing further underscores the significance of these developments. Amidst the backdrop of escalating U.S.-China tensions, companies are navigating a precarious landscape where regulatory decisions have far-reaching implications for global supply chains and market dynamics.

While the fate of Intel’s license hangs in the balance, the broader ramifications of these licensing policies echo across the tech industry.

Related:

(via)

Apple Watch Series 8 gets a massive Rs 20,000 discount, now on sale for Rs 24,999

By

Sean

-

Mar 13, 2024

The Apple Watch Series 8 has just received a massive discount in the Indian market. The company first unveiled the smartwatch back in 2022, and now, this model has received a major discount worth over 20,000 INR. So here is everything you need to know.

Apple Watch Series 8 Goes on Sale for Rs 24,999

At the moment, the Cupertino based giant’s Apple Watch Series 8 41mm variant is listed for just 24,999 INR (roughly 302 US Dollars). It is worth noting that the model was first launched in India for a 45,900 INR price tag. In other words, buyers are getting a discount worth 20,901 INR or about a 45 percent discount. This deal is currently available on Flipkart, which is a popular e-retailer in the region.

This is not all, the company is also offering an additional discount worth up to 1,500 INR to Axis, Citi, and ICICI Credit Card transactions. Keep in mind that only the Midnight Black color option is listed with this discounted price tag. At this price range, the Apple Watch Series 8 is a great deal. While it lacks some features of the newer Apple Watch Series 9, the Watch Series 8 is almost identical to the Watch Series 9.

For those unaware, the Watch Series 9 was released in India in September 2023. Since the Apple Watch Series 9 is available on Flipkart for 32,999 INR, the Watch Series 8 is a sweet option if you don’t want to spend another 8,000 INR.

RELATED:

Creality 10W Pro Diode Laser, Review: Now You Have A New Hobby

By

Will Chu

-

Mar 13, 2024

We are always searching for tech products, some of them really are the combination of high level of tech and affordability. This time we have the Creality Falcon 10W Pro Laser Engraver in our studio. This kind of tech product is not quite familiar to us, although we know how it works, but when it comes to mastering the craft, there is still a long way to go. So let’s get into this hobby, and see if we can provide some help for you along the way.

WHERE TO BUY

Buy Creality Falcon 10W Pro Laser Engraver on Creality Official Shop | Coupon code: FN10WPRO

Packaging and Assembly

Before we talk about packaging, we need to talk about what you should get when you are first into this hobby. Basically, when you want to get a laser engraver, besides the main unit, it is really recommended to have the enclosure and the honeycomb plate. There are several reasons:

If you live in an apartment or a building like us, it’s not that convenient to evacuate the smoke generated from the machine. So the enclosure with a vent fan built in is an essential.
Wherever the laser goes, it will burn things, and there is higher chance that it will leave a stain, or even cause fire if the laser stays in one spot for too long. So a honeycomb plate is also an essential, and there should be a metal plate underneath to go with it. Therefore the material used for engraving won’t be burnt, and your floor won’t get damaged.

What’s in the box:

X-Y Gantry
Laser computer control assembly
10W laser module
Air-assist device
Assembly screws and hardware
Measurement plate
Gantry legs
Power supply and Power cord
Linden plywood sample x 2
Wrenches
T-nuts with grub screws
8GB TF card and USB card reader
Safety goggles
Cloth
Manual

So moving onto the packaging stuff. As you can see, those three units we mentioned are packed separately. The assembly of the enclosure and honeycomb plates are pretty easy, following up on the instruction manual will enable you to finish it in 10mins.

Well for the main unit, it is a 30mins of work, which is also quite simple. Most of the work is in the X and Y axis, first we need to get the positions of the parameters correctly, as they must be facing inside, so later when you place the engraving material on the honeycomb plate, you have a rough idea of the X and Y positions. When the circle is completed, it’s time to put the racket with the laser onto it, the laser unit comes in as a complete form, so it saves a lot of work for everyone including some new comers like us, very thoughtful. Lastly, we need to put the air-assist device/pump, this parts are new to the Falcon series, and this is highly anticipated by previous customers, the benefit it brings to the unit is huge, which we will talk about later on.

Some tips we found when assembling the unit:

Watch the tutorial video carefully or slow it down a bit, to better learn about how to get the belts correctly. It can be overwhelming for people who don’t know how the belt mechanism works, so it may take more time.
We found that it’s better to tie the hose of the air-assist device at the end of the X-axis, which is the opposite side of the power cable, and it should be the right length. The benefit of doing so is to not let the hose touch the honeycomb plate, therefore won’t be hurt by the laser.

After we get the whole unit up and running, we can see the specs here:

Dimensions: 52 x 60 x 19cm (20 x 24 x 7.5 inches)
Laser source: Semiconductor type
Laser power: 10Watts
Laser engraving software: LaserGRBK, LightBurn
Operating System: MacOS, Windows
Voltage Input: 100-240 volts, 50-60Hz
Power supply voltage output: 24V, 3.0A, 72W
Safety Certifications: CE, UKCA, UL, etc
Supported materials: wood, bamboo, rubber, leather, leather, fabric, acrylic, plastic, etc

Test

As we are new to this hobby, we rely on the tutorials a lot. Luckily, Creality has prepared some instruction videos in the TF card, along with some sample Gcode files to start with.

Before we start the test, it’s a must to mention three major highlights or improvements this unit has:

The cover around the laser. This cover is tinted, so it significantly reduces the laser flash into our eyes.
The cover is magnetic, so it snaps on easy and secured, very thoughtful design.
There is a air-assist device built in, so the debris won’t stay on the surface of the material, therefore there won’t be any burnt stain left.

First we tested it in the simplest way, which is putting the TF card in and let it do its job. Well it performs ok, but it does not have that pleasure of creating your own things. So we went to the software to make our own.

We downloaded the LaserGRBL and started exploring. First we downloaded some free assets online, like this owl. It’s slightly complicated but the lines are not quite smashed together, so it is a middle level difficult. We followed the instruction video to do it, and it did not go well as we expected. So this is the time that we would like to bring out the first suggestion to Creality, which is that we hope there is more detailed instruction videos or materials for beginners, so everybody can enjoy the fun of creating.

By the third day we got the machine, we managed to learn how to do the basic engraving, it’s obviously not perfect, as the image is not aligned in the center, and we haven’t tried cutting materials, so we need to spend more time on it.

Verdict

So to sum up our experience with this Creality Falcon 10W Pro Laser Engraver, it is a great machine to start with in this hobby. There are a lot of features you can have with it, such as the Bidirectional Limit Switch, Active Stop Function, Security Lock Design, Emergency Stop Button, Laser Protective Cover. And we learned that the laser unit can be upgraded to a 20W one, which is available right now, and also the price on this one is quite good compared to some other laser engravers on this market. So if you are looking for your first laser engraver, this is the best option so far.

WHERE TO BUY

Buy Creality Falcon 10W Pro Laser Engraver on Creality Official Shop | Coupon code: FN10WPRO

OnePlus Ace 3V front design teased, features Alert Slider & minimal bezels

By

Sean

-

Mar 13, 2024

The OnePlus Ace 3V is set to be unveiled in the Chinese market soon. It has recently surfaced in various rumors and reports, and now, the latest leak reveals the front design of the smartphone thanks to live images of the device. So let’s have a look.

OnePlus Ace 3V Front Design

The Chinese smartphone brand’s Ace 3V is expected to be one of the first devices to feature Qualcomm Snapdragon 7+ Gen 3 SoC. Qualcomm is gearing up to release this chipset on March 18, so the OnePlus Ace 3V will likely launch around the end of this month. But ahead of any official announcement, OnePlus China’s President Li Jie has shared live images of the Ace 3V. This image has offered us a look at the front design of the upcoming device.

The OnePlus Ace 3V display houses a center aligned punch hole cutout for the selfie shooter and is surrounded by thin bezels on all four sides. So we can expect to see a high screen to body ratio as well. We can even see the Alert Slider being housed on the left side, while the volume rockers and the power button are likely on the right side. Just last week, a live shot of the device surfaced online, which showcased the rear design.

Similarly, the Ace 3V was just spotted on the GeekBench database carrying the Snapdragon 7+ Gen 3 SoC along with 16GB of RAM. It also ran on the Android 14 operating system. Based on what we know so far, this model may sport an OLED display with a 1.5K resolution and a 120Hz refresh rate. The OnePlus Ace 3V has a 16-megapixel selfie shooter on the front, while the rear packs a 50-megapixel primary camera that offers OIS (Optical Image Stabilization). Other notable features include 5,500mAh battery pack with 100W wired fast charging, in-display fingerprint scanner, and an IR blaster.

RELATED:

BYD launches budget-friendly e2 Glory edition, heading EV Price War in China

By

Joane

-

Mar 13, 2024

BYD, the world’s foremost electric vehicle (EV) manufacturer, has introduced its latest model, the e2 Glory Edition in the Chinese market. Priced at $12500 (89,800 yuan), this updated version marks a substantial 12.65% reduction compared to its predecessor, signaling BYD’s strategic response to the growing demand for budget-friendly EV options in China.

The e2 Glory Edition is positioned as a family-oriented pure electric vehicle, boasting a range of 405 kilometers. Equipped with a blade battery pack and a single motor offering 70 kW peak power, it aims to provide consumers with a compelling combination of style, efficiency, and comfort at an affordable price.

This move aligns with BYD’s overarching strategy to solidify its dominance in the EV market and accelerate the transition from traditional petrol vehicles to electric alternatives. By offering competitive pricing on models like the e2 Glory Edition, BYD seeks to appeal to a broader demographic, particularly middle-income consumers who are increasingly price-conscious in the face of economic uncertainty.

The decision to slash prices on the e2 Glory Edition mirrors a broader trend in the Chinese EV market, with BYD spearheading a discount war among industry rivals. Competitors such as Xpeng, Zeekr, and SAIC-GM-Wuling have also responded by reducing prices for their respective EV offerings, underscoring the fierce competition in the sector.

Moreover, BYD’s strategic direction involves updating its lineup of affordable models, including the Qin Plus and Chaser 05, with lower-priced editions. This comprehensive product update underscores BYD’s commitment to replacing traditional gasoline vehicles with new energy alternatives on a larger scale, to capture a greater market share and accelerate EV adoption nationwide.

BYD’s initiative to offer more accessible EV options underscores its determination to maintain competitiveness and drive industry-wide changes in China’s automotive landscape.

Related:

Realme 12x now visits EEC & Camera FV-5 ahead of launch

By

Sean

-

Mar 13, 2024

Realme is apparently working on a new Realme 12 series model. The company recently unveiled the Realme 12 and Realme 12+ in the Indian market. And now, the latest certification sightings have revealed that a Realme 12x model will be arriving soon as well. So here are all the details.

Realme 12x surfaces on EEC, and Camera FV-5

To recall, this smartphone model was previously spotted on multiple certifications like Bluetooth SIG, TUV, and India’s BIS. This hinted that the device could be announced soon, and also revealed its RMX3997 model number. The Bluetooth SIG listing confirmed support for the Bluetooth 5.3 standards while the TUV Rheinland certification will be powered by a 4,890mAh battery pack that offers 15W wired fast charging.

As the name suggests, the Realme 12x is the successor to the Realme 11x. The EEC certification confirms the RMX3997 model number but does not reveal any other finer details regarding the upcoming smartphone. On the other hand, the Camera FV-5 database revealed that the Realme 12x 5G will feature a rear camera with a 28mm focal length and an f/1.8 aperture.

This primary shooter is expected to be a 50-megapixel sensor. Meanwhile, the selfie camera was listed with a 26mm focal length with an f/2.0 aperture. Unfortunately, finer details like specs and features are still unknown, so stick around for more updates regarding this device.

RELATED:

(Via)

Poco X6 Neo launched in India with 120Hz AMOLED display, 108MP camera, IP54 rating, and more

By

Sudarshan Ravichandran

-

Mar 13, 2024

Poco X6 Neo makes its global debut in India today as scheduled. It is the third model in the lineup after Poco X6 and Poco X6 Pro.

The handset is the most affordable of all in the series. Hence, it offers downgraded specs compared to the original two phones.

Also, the product was originally released as Redmi Note 13R Pro in China in November.

Poco X6 Neo Specifications

The Poco X6 Neo features a flat frame design. Its rear cameras are placed vertically on a large rectangular island.

The device is IP54-rated for splash resistance. It measures 7.69mm in thickness and weighs 175g.

The smartphone flaunts a 6.67-inch centered punch-hole AMOLED display with minimal bezels and Corning Gorilla Glass 5 protection. The panel has a resolution of 2400 x 1080 pixels (FHD+) and 394 PPI. It supports up to a 120Hz refresh rate, 1920Hz PWM dimming, 2160Hz instant touch sampling rate, and 1000 nits peak brightness level.

The handset is powered by a MediaTek Dimensity 6080 SoC. The chipset is paired with LPDDR4x RAM and UFS 2.2 storage. As for software, the phone boots Android 13-based MIUI 14 and is guaranteed to receive 2 Android updates and 4 years of security patches.

As far as cameras are concerned, there’s a 108MP primary sensor on the rear with 3x in-sensor zoom support. It is paired with a 2MP depth sensor. On the front, there’s a 16MP shooter.

For biometrics, the device uses a side-mounted fingerprint sensor. It also comes with a 3.5mm headphone jack and an IR blaster but lacks a MicroSD card slot and only has a single bottom-firing speaker.

On the connectivity front, the smartphone offers support for dual SIM, 5G, WiFi 5, Bluetooth 5.3, GNSS, and USB Type-C. Last but not least, it is backed by a 5,000mAh battery and supports 33W wired charging.

Poco X6 Neo Price in India

The Poco X6 Neo is offered in the following two memory configurations in India.

8GB + 128GB – ₹15,999 (~$195)
12GB + 256GB – ₹17,999 (~$215)

The product can be availed in either Astral Black, Horizon Blue, or Martian Orange color options from Flipkart.

Early access sale starts today (March 13) at 7 PM IST. Buyers can avail a ₹1,000 discount on transactions via credit cards issued by ICICI Bank.

RELATED:

Vivo T3 camera & chipset teased ahead of India launch

By

Sean

-

Mar 13, 2024

Vivo is gearing up to launch the Vivo T3 in India soon. But ahead of its official release, the company has shared a fresh teaser that hinted at some of its key specs. A Flipkart microsite recently went live, which teased the upcoming smartphone’s chipset and camera details. So let’s have a look.

Vivo T3 Teaser

To recall, the Vivo T3 will be exclusively available in the Indian market via Flipkart. The design of the device was previously teased as well. Now, the Chinese smartphone brand has revealed that the Vivo T3 5G will be equipped with a MediaTek Dimensity processor. While the exact name of the sensor wasn’t revealed, it is expected to be the Dimensity 7200 SoC. This is the same chipset that powers the iQOO Z9 5G.

Apart from this, Vivo also teased the camera of the new smartphone as well. Again, finer details regarding the camera of the Vivo T3 were not revealed. Although, it was confirmed to be the first smartphone in the segment to feature a Sony camera that offers OIS (Optical Image Stabilization). Based on earlier reports, this camera is expected to be the Sony IMX882 primary sensor, which will be paired with two other sensors and LED flash.

Vivo will launch the T3 5G in Crystal Flake and Cosmic Blue color options. The handset is rumored to sport a 6.67-inch AMOLED display that offers a 120Hz refresh rate, Full HD+ resolution, and 1800 nits of peak brightness. This is all the information we have at the moment so stay tuned for more updates.

RELATED:

Oppo Watch X officially confirmed to launch on March 22 in China

By

Debasish

-

Mar 13, 2024

Today Oppo officially announced that it will launch the Oppo Watch X smartwatch in China on March 22. The company has already debuted the Oppo Watch X in Malaysia on February 29th. Notably, this is the same product that was shown off as the OnePlus Watch 2 at MWC 2024 in late February.

A notable difference between the Chinese and Global versions of the watch is the use of software. While the Oppo Watch X comes with Google’s Wear OS 4 in the global market, the company will offer the product with its ColorOS Watch based on AOSP in China, which might help them to reduce the product pricing. Apart from that, the hardware specifications should remain the same.

Appearance and specification

The global version of the product is available in two different color options – Platinum Black and Mars Brown and the strap is made of “fluororubber” and stainless steel buckle.

In the front, you will look at a 1.43″ 466×466 resolution circular AMOLED display that offers a decent 326PPI pixel density. Oppo notes that the Oppo Watch X can reach up to 1000 nits in high brightness mode (typically triggered by direct sunlight or bright ambient lighting) and 600 nits of default maximum brightness. The watch comes with a 500 mAh battery and weighs around 80 grams including the strap. The Chinese version reportedly supports eSIM.

For computing needs, Oppo Watch X comes equipped with a dual chipset architecture same as the OnePlus Watch 2, where the Snapdragon W5 chip runs the heavy tasks and a ultra low-power co-processor microcontroller unit (BES2700BP) leads the system during less demanding tasks. Notably, this device is rated for 12 days of battery life. Google enabled the dual-chipset architecture as part of Wear OS 4 with OnePlus Watch 2 and we aren’t sure at this point if Oppo has managed to implement the same for the Chinese version with the AOSP-based ColorOS Watch operating system.

Pricing (rumored)

The pricing for the Chinese market isn’t official yet. Nonetheless, some previous leaks claim that the Oppo Watch X will cost around ¥1,000 (~$140) in China. This is a lot more affordable price tag as compared to the global market. For reference, the Oppo Watch X with Wear OS costs NT$10,990 (~$366) in Taiwan.

Related:

iQOO Z9 Turbo tipped to feature Snapdragon 8s Gen 3, may rival Realme GT Neo 6

By

Anvinraj Valiyathara

-

Mar 13, 2024

Several brands are gearing up to launch new phones featuring the upcoming Snapdragon 8s Gen 3 (tentative name) chip. Reports have suggested that it may rival the upcoming Realme GT Neo 6, which may come equipped with the said chipset. A new leak, courtesy of tipster Digital Chat Station, reveals that the forthcoming iQOO Z9 Turbo will also feature the Snapdragon 8s Gen 3.

iQOO Z9 Turbo: What to expect?

DCS did not reveal any other information about the iQOO Z9 Turbo. However, in his previous Weibo posts, he shared leaked specifications of an upcoming iQOO phone equipped with the Snapdragon 8s Gen 3. Previous leaks suggested that this device may arrive as an iQOO Neo 9 series phone, but it now appears that this device will break cover as a Z9-series phone.

As per previous leaks, the said device may feature a flat OLED panel of 6.78 inches. The screen may support a 1.5K resolution, a 144Hz refresh rate, and 2160Hz PWM dimming. For security, it will have an in-screen fingerprint scanner. The device is expected to run on OriginOS 4-based Android 14.

The topmost variant of the iQOO Z9 Turbo is expected to feature 16 GB of LPDDR5x RAM and 1 TB of FUS 4.0 storage. The battery size of the device is not known yet, but it is expected to arrive with support for 120W fast charging. The Z9 Turbo may feature a plastic frame and come equipped with a 50-megapixel dual-camera system.

Rumors are rife that the iQOO Z9 and iQOO Z9x will launch in April in China. While the Indian edition of the Z9 has the Dimensity 7200, its Chinese edition may feature the Snapdragon 7 Gen 3. The Z9x is expected to feature the Snapdragon 6 Gen 1 SoC. It remains to be seen whether the Z9 Turbo debuts alongside the Z9 and Z9x.

RELATED:

Realme Narzo 70 Pro 5G confirmed to support 67W fast charging

By

Anvinraj Valiyathara

-

Mar 13, 2024

Realme Narzo 70 Pro 5G is set to launch on March 19. With a couple of days remaining for the official announcement, the company is gradually revealing more details about the device. In the poster below, it is confirmed that the device has fast charging capabilities.

Realme Narzo 70 Pro 5G fast charging capabilities

Realme Narzo 70 Pro 5G 67W fast charging — Realme Narzo 70 Pro 5G supports 67W fast charging

The Narzo 70 Pro 5G will come with support for 67W fast charging, confirms Realme. While the brand has not revealed the battery size, it is likely to come packed with a 5,000mAh battery, which has now become a standard for mid-range phones.

One of the major attractions of the Narzo 70 Pro 5G is that it will have 65 percent fewer preloaded apps than before. Furthermore, for hands-free usage, the device will have support for numerous air gestures. The brand is yet to officially confirm the chipset that will power the Narzo 70 Pro.

The Narzo 70 Pro 5G has a 120Hz OLED panel with support for rainwater touch. There is no information about the front camera, but its rear camera setup will comprise the Sony IMX890 50-megapixel primary camera with OIS support. In terms of design, the Narzo 70 Pro flaunts a dual-tone glass panel on the back with an attractive arc design.

Realme recently confirmed that it will conduct the early bird sale of the Narzo 70 Pro 5G at 6pm (local time) on the launch date. Those who purchase the phone in this sale will get the all-new green variant of the Buds T300 TWS earbuds for free. In addition, buyers will also benefit from other offers, such as a Rs 2,000 discount via bank cards and no-cost EMI. As far as pricing is concerned, the device is likely to be priced at under Rs 25,000 (~$300) in India.

RELATED:

Vivo X Fold 3 Pro AnTuTu listing appears before March 26 tentative launch date

By

Anvinraj Valiyathara

-

Mar 13, 2024

A new Vivo phone bearing the V2337A model number has emerged in the database of the AnTuTu benchmarking platform. As per reports, it is nothing but the upcoming Vivo X Fold 3 Pro foldable phone. Here is a look at the details that have emerged through the AnTuTu listing of the device.

Vivo X Fold 3 Pro AnTuTu listing

As can be seen in the above poster, the Vivo X Fold 3 Pro has achieved an impressive AnTuTu score of 2,176,828 points. This comprises 471,878 points in the CPU test, 893,816 points in the GPU test, 464,490 points in the memory test, and 346,644 points in the UX test score.

In terms of specifications, the listing reveals that the Vivo X Fold 3 is equipped with the latest Qualcomm Snapdragon 8 Gen 3 mobile platform, LPDDR5 RAM, and UFS 4.0 storage. The X Fold 3 Pro variant that has appeared on AnTuTu has 16 GB of RAM and 1 TB of storage, which appears to be its topmost configuration. In addition, the device will ship with Android 14, which will mostly have a layer of OriginOS 4 on top.

Vivo X Fold 3 Pro launch date (tentative)

DCS' Vivo X Fold 3 Pro launch date leak — DCS’ Vivo X Fold 3 Pro launch date leak

A recent leak claimed that the Vivo X Fold 3 series would be announced in the last week of March. Now, a new Weibo post by tipster Digital Chat Station reveals that it is tentatively scheduled to break cover on March 26.

The tipster reiterated that the X Fold 3 Pro will have an OV50H OmniVision 50-megapixel lens with an f/1.68 aperture as the primary snapper. It will be accompanied by an OV64B 64-megapixel periscope telephoto camera with support for 3x optical zoom, 70mm focal length, and telephoto macro shots. The X Fold 3 Pro is said to be equipped with the Vivo V3 ISP for a better photography experience. DCS claimed that the device would be available in black and white shades. He further said that the white variant looks great as it features fibreglass.

RELATED:

Moto G (2024) launched with 120Hz display, Snapdragon 4 Gen 1, 5,000mAh battery

By

Anvinraj Valiyathara

-

Mar 13, 2024

Apart from launching the Moto G Power 5G (2024), Motorola has also announced the Moto G (2024) in the US and Canada. With a price tag of $199, the G (2024) is the most affordable 5G-enabled entry-level phone from the brand. Continue reading ahead to learn everything about the specifications, features, and price of the device.

Moto G (2024) specifications and features

The Moto G (2024) has a 6.6-inch LCD punch-hole screen that produces an HD+ resolution of 1612 x 720 pixels, a 269 ppi pixel density, a 21.5:9 aspect ratio, and a 120Hz refresh rate. For security, the device is equipped with a side-facing fingerprint scanner. The phone measures 164.39 x 74.96 x 8.23mm and weighs 194 grams. It has a water-repellent body fitted with a vegan leather back.

The Moto G (2024) features the Snapdragon 4 Gen 1 chipset, 4 GB of RAM, and 4 GB of virtual RAM. The device offers 128 GB of UFS 2.2 storage and packs a 5,000mAh battery with 18W fast charging. It runs on Android 14, which has a layer of Motorola’s My UX on top.

The Moto G (2024) has a 50-megapixel main camera and a 2-megapixel macro snapper on the back. It has an 8-megapixel front-facing camera. The device is equipped with other features, such as dual SIM, eSIM, 5G, Wi-Fi 802.11ac, Bluetooth 5.1, GPS, NFC, a USB-C port, a 3.5mm audio port, and dual speakers.

Starting March 21, the Moto G (2024) will be available through T-Mobile and Metro. It will also be available through other carriers and MVNOs in the country. The unlocked version of the device is available through Motorola US’ website as well as Amazon US and Best Buy US starting May 2. On the same date, the device will also be released in Canada.

RELATED:

Moto G Power 5G (2024) launched with a 120Hz display, Dimensity 7020, 50MP dual cameras, and more

By

Anvinraj Valiyathara

-

Mar 13, 2024

Moto G Power 5G (2024) has been launched as the successor to last year’s G Power (2023) for the US and Canadian markets. Some of the key features of the device include a 120Hz display, a Dimensity 7-series chipset, 50-megapixel cameras, and 30W fast charging. Here is a look at the specifications, features, and price of the device.

Moto G Power 5G (2024) specifications and features

The Moto G Power 5G (2024) has a 6.7-inch LCD panel with a punch-hole design. The screen offers an FHD+ resolution, a 120Hz refresh rate, a 391 ppi pixel density, and an 85 percent screen-to-body ratio. The device measures 167.22 x 76.44 x 8.5mm and weighs 201 grams. It offers a water-repellent construction along with a vegan leather back.

The back panel of the Moto G Power 5G (2024) has a 50-megapixel primary camera with OIS support and an 8-megapixel ultra-wide lens with a 118-degree FOV. For selfies, the device is equipped with a 16-megapixel front-facing camera.

The Dimensity 7020 chip powers the smartphone. It ships with 8 GB of RAM. 128 GB of storage, and a microSD card slot for additional storage. The device boots to My UX-based Android 14. It offers other features, such as dual SIM with eSIM support, 5G, Wi-Fi 802.11ac, Bluetooth 5.3, NFC, a USB-C port, a side-facing fingerprint scanner, a 3.5mm audio jack, and dual speakers.

Moto G Power 5G (2024) price in the US

In the US, the Moto G Power 5G (2024) is available for purchase via Motorola.com, Amazon (US), and Best Buy (US) starting March 29. The device has arrived with a price tag of $299. It comes in two shades, such as Midnight Blue and Pale Lilac.

RELATED:

Fresh Apple Patent Points Towards a Smart-Home Network Controlled by “The Palm of Your Hand”

By

Anubhav

-

Mar 13, 2024

The United States Patent and Trademark Office (USPTO) recently issued another patent to Apple for a special handheld device. The company plans to take its smart home capabilities to a whole other level it seems, since you can literally use the “palm of your hand” to control various devices around your home. Let’s have a look at this one.

The handheld device could also be used as an AR/VR accessory it seems.

The patent describes a handheld device equipped with a variety of functionalities designed to interact with smart home devices and potentially serve as an accessory for augmented reality (AR) or virtual reality (VR) applications. Key features outlined in the patent include cellular network connectivity and a voice control assistant to facilitate user interaction. The device would also house a compact touch-sensitive display for both visual output and touch input. Integrated microphones would capture voice commands, and speakers would provide audio output. The patent further details location tracking capabilities for the device itself, with the possibility of extending this functionality to nearby devices.

There could be so many applications for this device. It could operate as a voice-controlled smart speaker, responding to user commands to manage smart home devices or access information. The patent suggests the ability to run various applications, such as weather apps, music streaming services, or even payment platforms. The device could also be used as a universal remote control for smart home devices like speakers, lights, appliances, and more. Interestingly, the patent also hints at the possibility of using the device as an AR/VR anchor or visual marker, potentially as an input device or providing output for other AR/VR equipment. Who knows?

The concept of a multifunctional handheld device that seamlessly connects various smart home gadgets is definitely interesting if not anything else. It will be interesting to follow the development of this concept and observe if it translates into a commercially available product, and how it might integrate with Apple’s existing smart home offerings. Another Apple patent surfaced recently too, and that seems quite exciting for future iMacs. For more information, stay tuned to Gizmochina News!

RELATED:

(Via, Source)