Motorola’s next budget smartphone has just surfaced online. The Moto G36 is set to debut in the Chinese market soon, arriving as the successor to the affordable Moto G35. It was just spotted on China’s TENAA certification, which revealed some of its key specifications. So here are all the details.

Motorola’s Next Budget Phone Shows Up with a Massive Battery

The company’s next entry level device was just spotted on the TENAA certification, carrying the XT2533-4 model number. Looking at the listing, the Moto G36 will sport a tall 6.72-inch TFT display with FHD+ resolution, similar to its predecessor. While the processor is still under wraps, it will be a 5G chipset that has an octa core configuration with a 2.4GHz clock speed. The TENAA database also confirmed that there are multiple storage configurations. The Moto G36 will arrive in 4GB, 8GB, 12GB, and 16GB.

Although, any RAM variant higher than 8GB seems unlikely. For storage, the budget phone was certified with 64GB, 128GB, 256GB, and 512GB variants. A gigantic 6,792mAh battery pack will power the Moto G36 with support for 33W wired fast charging. Motorola’s new affordable phone measures 8.7mm in thickness and weighs 210 grams. On the rear, you get a dual camera setup that consists of a 50MP main camera and an 8MP ultra wide angle lens.

Meanwhile, the front houses a 20MP shooter for selfies and video calls. Other notable features include a fingerprint scanner and face recognition for security. The certification also offers us a first look at the Moto G36, which confirms its matte purple finish. This is likely a vegan leather rear panel, which Motorola often uses on its devices.

For more daily updates, please visit our News Section.

Tech enthusiast? Get the latest news first! Follow our Telegram channel and subscribe to our free newsletter for your daily tech fix!

The post Moto G36 Spotted on TENAA with Massive 6,790mAh Battery & 6.72-inch Display appeared first on Gizmochina.

Motorola recently unveiled the Edge 60 Fusion, while the base Edge 60 was just spotted in a fresh leak earlier today (4th April 2025). But we finally have more official details after the Edge 60 Pro and Edge 60 got certified on a Chinese certification platform.

Motorola Edge 60 Pro, Edge 60 Full Specs Revealed

The two smartphones were spotted on China’s TENAA database carrying the XT2505-4 model number (Edge 60) and XT2507-5 (Edge 60 Pro). The TENAA certification typically lists the images of the devices as well as most of their key specifications. So ahead of the launch, we have more concrete information about both these devices. The Edge 60 just surfaced in a leak that revealed its color options and design, and this listing confirms the Blue color option.

Meanwhile, the Edge 60 Pro can be seen with a similar design but in a Gray variant. Looking at the TENAA database, both models sport a 6.67-inch curved OLED display with a 1.5K resolution and an in display fingerprint scanner. The Edge 60 is equipped with an unknown octa core processor with a 2.5GHz clock speed, while the Edge 60 Pro features the MediaTek Dimensity 8350 SoC (with a 3.35GHz clock speed). The former arrives with 6GB, 8GB, 12GB, and 16 GB of RAM, while the latter offers 8GB, 12GB, and 16GB configurations.

For storage, the Edge 60 is available in 128GB, 256GB, 512GB, and 1TB options and the Edge 60 Pro offers the same four memory capacity. A sizeable 5,500mAh battery pack powers the base model, which is expected to offer 68W wired fast charging. On the other hand, the more premium Pro model packs a larger 6,000mAh cell with a faster 90W wired fast charging support. For optics, the rear has a 50MP + 10MP + 50MP triple camera setup with 3x optical zoom on the Edge 60, with the front packing a 50MP selfie shooter.

The Edge 60 Pro has a 32MP front facing camera with the rear featuring a 50MP + 13MP and a third sensor that could be a telephoto shooter with 3x optical zoom. This could be a telephoto or periscope telephoto camera. Motorola’s Edge 60 will launch with a 7.95mm body and weighs 180.4 grams, but the Edge 60 Pro has a slimmer 7.25mm profile that weighs 188 grams. One notable aspect that was revealed on the TENAA listing was an unknown button on the Edge 60 Pro. This could be a dedicated camera button or might serve a function related to AI features.

For more daily updates, please visit our News Section.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

The post Motorola Edge 60 Pro, Edge 60 Visits China’s TENAA: Design, Specs, & More Revealed appeared first on Gizmochina.

OPPO is preparing to launch its new Watch X2 series in February 2025, likely alongside the Oppo Find N5 foldable. A recent listing on the TENAA certifications has revealed details about the smartwatch, which is expected to offer advanced features and compete with premium smartwatches like Samsung’s Galaxy Watch series and the Apple Watch series.

Key Features and Certification Details

The OPPO Watch X2 with model OWW242 was recently certified by TENAA, providing a first look at its design and features. It has a circular gold body with white or silver bezels and white or cream leather straps. A rotating crown may also be included. The watch supports Bluetooth, GPS, BeiDou, GLONASS, Wi-Fi, NFC, and eSIM for use with China Unicom and China Mobile. Its 345mAh battery promises reliable performance.

As per previous leaks, the series will include three models: the standard Watch X2, a larger 46mm version, and the flagship Watch X2 Pro, which will have premium features. Reports also suggest that some models may be rebranded under the OnePlus name for global markets, likely as the OnePlus Watch 3.

Health and fitness are key focuses of the Watch X2 series. Zhou Yibao, head of the OPPO Find series has already confirmed that the Watch X2 will feature blood pressure monitoring, and it is likely to also come with ECG monitoring, wrist temperature measurement, and a quick 60-second health check function. It will also track fitness activities like steps and heart rate, and the above-mentioned GPS capabilities could help closely track physical activities like cycling and running.

The watches will come with an OLED round display, run on OPPO’s ColorOS system, and offer water resistance for durability. They also support 10W fast charging for quick battery recharges. The previous 3C listing of the Watch X2 with model number “OWW251” has revealed that it will offer a large 631mAh or 648mAh battery and 10W fast charging.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

(via)

The post Oppo Watch X2 spotted on TENAA revealing design & key specs appeared first on Gizmochina.

An unknown Oppo phone has been listed on TENAA. Bearing the model number PKQ110, this device is expected to be the vanilla Oppo A5.

For the unaware, the Oppo A5 Pro made its debut in China on Christmas Eve. It is a budget 5G smartphone with some unique features, such as an IP69 rating, a silicon-carbon battery, and Corning Gorilla Glass Victus 2 protection.

The TENAA listing for the alleged Oppo A5 not only discloses its design but also some of its specs.

The handset will arrive with flat sides and a squircle camera module. The volume and power keys will sit on the right side.

The listing images show the product in violet. However, it should be available in other colors.

On the front, the device will sport a 6.7-inch FHD+ OLED screen and an 8MP selfie camera. While its back will include a 50MP main camera camera assisted by a 2MP secondary sensor.

The phone will be powered by an unnamed chipset featuring a 2.2GHz CPU. It will be available in 8GB/12GB RAM and 256GB/512GB storage variants.

The smartphone will measure only 7.65mm in thickness and weigh 185g. Yet, it will pack a huge 6,330mAh battery (rated capacity). The phone could come with a silicon-carbon battery like its bigger sibling.

Unfortunately, this is all the TENAA listing has to say about the forthcoming Oppo PKQ110. The listing does not confirm it to be Oppo A5. But there’s a high chance of it being one, given its similarities to the A5 Pro in terms of looks as well as specs.

We look forward to learning more about this product in the coming days as we near its launch. If it’s indeed the Oppo A5, it should cost around ¥1500 (~$200) or more.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

The post Alleged Oppo A5 arrives on TENAA revealing design, specs appeared first on Gizmochina.

The Realme GT 7 Pro was one of the cheapest flagship phones with the new Snapdragon 8 Elite chipset. But now, it seems like a base variant is also in the works. It seems that a Realme GT 7 was spotted on a major Chinese certification platform, revealing some of its key specs and design.

Is it really the Realme GT 7?

Unfortunately, the TENAA listing does not reveal the device’s name (Via TheTechoutlook). But it does confirm the RMX5090 model number. Some of its key specifications were also revealed in the online database. The Realme GT 7 sports a tall 6.78-inch AMOLED display that offers 2780 x 1264 resolution (1.5K). We can expect it to offer high brightness and high refresh rate as well. Apart from this, we also have some specs for the processor.

The chipset has an octa core chip with a clock speed of 4.3GHz. To recall, this seems quite close to the Snapdragon 8 Elite SoC, although this is just speculation at the moment. But if this is true, it might once again be the most affordable Snapdragon 8 Elite powered flagship in the market. The TENAA listing confirms that the processor is paired with 8GB, 12GB, 16GB, or 24GB of RAM along with 128GB, 256GB, 512GB, and 1TB of internal storage.

Lastly, the rear will reportedly have a 50MP + 8MP dual camera setup, while the front has a 16MP selfie camera. Under the hood, a massive 6,310mAh battery pack powers this device. Other notable features include Bluetooth, Infrared, an in-display fingerprint scanner, and a face unlock feature. One of the reasons why this might be the Realme GT 7 is also its design. The certification lists some pictures of the supposed Realme GT 7, which has a design reminiscent of the GT 7 Pro.

Don’t miss a thing! Join our Telegram community for instant updates and grab our free daily newsletter for the best tech stories!

The post Realme GT 7 May Have Surfaced in China’s TENAA: Key Specs and Design Revealed appeared first on Gizmochina.

Nubia is gearing up to launch its flagship series of gaming smartphones in China soon. But ahead of its official announcement, live images of the Red Magic 10 Pro+ model and its battery specs have been revealed through a certification listing.

Red Magic 10 Pro+ Design Revealed via TENAA

The upcoming gaming phone was spotted on China’s TENAA certification (Via 91Mobiles). Looking at the database, we can see the front and rear design of the Red Magic 10 Pro+. It features flat edges, a thin body, minimal bezels, a full display on the front, and a transparent panel on the rear. You can even see the camera sensors along with the LED flash module on the top left on the back.

Just recently, the Red Magic 10 Pro series had its full design revealed through promotional images (teasers also confirmed the Deuterium Transparent Dark Night and Deuterium Transparent Silver color options). So these renders are also in line with the previous teasers. One notable aspect of this device that is visible in these live images is the camera modules, which sit flush in the rear panel and don’t protrude from the back. The TENAA listing online has also confirmed the battery details of the Red Magic 10 Pro+.

It houses a dual battery design with one being a 3,100mAh and the other featuring a 3,450mAh capacity. In total, this amounts to a total battery capacity of 6,550mAh. This is a major upgrade over last year’s Red Magic 9 Pro+ which housed a 5,500mAh battery pack. Previous rumors also hinted at the device featuring a sizeable 7,050mAh cell. This model is confirmed to launch with the Snapdragon 8 Elite SoC, which is paired with a BOE display with a 1.5K resolution and a 144Hz refresh rate.

The post Red Magic 10 Pro+ Live Images & Battery Details Revealed on TENAA appeared first on Gizmochina.

Vivo’s next gen flagship foldable phone has just surfaced in a certification platform in China. The company is working on the upcoming Vivo X Fold 4, which has been sighted on TENAA. This listing has confirmed a massive battery under the hood, so let’s check it out.

Vivo X Fold 4 with Huge Battery visits TENAA

The Chinese brand recently unveiled the Vivo X200 series of flagship smartphones. But now, the Vivo X Fold 4 was spotted on TENAA carrying the model number V2429A. While the official moniker of the smartphone is still unclear, the smartphone is expected to be the Vivo X Fold 4. However, the IMEI database confirmed that the Vivo X Fold 4 has the V2429 model number. So the V2429A could be one of the foldable phone’s variants.

Unfortunately, the certification did not reveal any major details regarding the smartphone like its specs, design, and more. Although a 91Mobiles report managed to dig out some information regarding the battery pack in the database. The Vivo X Fold 4 houses a massive 6,365mAh cell, which would likely be marketed as a 6,500mAh battery. If this is true, the Vivo X Fold 4 would have a much larger battery compared to the 5,500mAh cell on the Vivo X Fold 3. This is also in line with one of our previous reports as well.

It also means that the Vivo X Fold 4 has the largest battery on any foldable phone. With the larger battery, this device might have a slightly thicker body than its predecessor. However, the X Fold 4 is expected to have a thinner and lighter design than the X Fold 3 Pro. Apart from this, the foldable phone was listed with Satellite Navigation (GLONASS), dual 5G SIM support, and support for Android 15 OS out of the box. Rumors have hinted that the X Fold 4 would be equipped with the Snapdragon 8 Gen 3 SoC. But keep in mind that this is still just an unconfirmed report, so take this news with a pinch of salt.

The post Vivo X Fold 4: Next-Gen Foldable Phone Certified with a Massive 6,365mAh Battery appeared first on Gizmochina.

The CEO of Xiaomi, Lei Jun, recently confirmed that a new Redmi Pad Pro 5G version is in the works. As the name suggests, this model offers 5G support over the regular Pad Pro’s Wi-Fi connectivity. Now, this upcoming tablet has surfaced on a major Chinese certification, hinting at its imminent launch.

Redmi Pad Pro 5G China launch imminent

The Redmi Pad Pro 5G model was seen in the TENAA database carrying the 24074RPD2C model number. From Lei Jun’s previous announcement, we know that the new tablet will require a physical SIM card for 5G network and won’t support e-SIM. This device also offers dual SIM support along with GPS, AGPS, BeiDou, GLONASS, and WLAN.

The TENAA certification confirmed that the Redmi Pad Pro 5G will be powered by a 4,900mAh battery pack. Considering the regular Redmi Pad Pro is powered by a 10,000mAh cell, we can expect the 5G version to offer a similar battery pack as well. Apart from this, the 5G version should offer similar specs as the original version. To recall, the Redmi Pad Pro sports a 12.1-inch 2.5K LCD panel with 2560 × 1600 pixels, a 120Hz refresh rate, and a 180Hz touch sampling rate.

Under the hood, it is equipped with the Qualcomm Snapdragon 7s Gen 2 SoC, which is paired with 6GB or 8GB of RAM and 128GB or 256GB of internal storage. It runs on the Android 14 OS based HyperOS custom skin out of the box. For optics, both the front and back feature an 8-megapixel camera. Other notable features include 33W wired fast charging, an in-display fingerprint scanner, an infrared sensor, Bluetooth 5.2, and quad speakers with Dolby Atmos support.

RELATED:

• Redmi Pad Pro 5G version coming soon, Xiaomi CEO confirms
• Redmi A3x India launch near: Upcoming budget phone visits Google Play Console
• Redmi 13 4G Expected Features: Brand’s Next Budget King?
• Lenovo Legion Y700 2024: Latest Gaming Tablet with Enhanced Display now available at Giztop
• Xiaomi 13 Ultra Premium Camera Phone is now only $799
• 10 Best Free Android Games in 2024

The post Redmi Pad Pro 5G arriving in China soon: Upcoming tablet visits TENAA appeared first on Gizmochina.

A new Oppo smartphone was just spotted on a Chinese certification. The device in question is believed to be a new Oppo A3 Pro variant. Reports have hinted that it is the flat display variant of the A3 Pro model that launched earlier. So let’s check it out.

Oppo A3 Pro spotted on TENAA

The Chinese brand’s new A3 Pro variant recently surfaced on TENAA carrying the PKA110 model number. Looking at the certification, we can see that it sports a flat display on the front with a punch hole cutout for its selfie shooter. Meanwhile, it looks quite similar to the regular A3 Pro model from the rear with a large circular camera island, which houses two image sensors. The certification sighting has also confirmed more details regarding its battery parameters.

According to the TENAA listing, the upcoming mid range smartphone will be powered by a 4,870mAh battery pack. Although, its typical value will likely be rated as 5,000mAh. While finer details were not revealed, it will likely borrow most of its specifications from the existing A3 Pro model. To recall, the Oppo A3 Pro launched with a tall 6.7-inch curved AMOLED display with a 120Hz refresh rate and Full HD+ resolution.

Under the hood, it is equipped with the MediaTek Dimensity 7050 SoC, which is paired with up to 12GB of RAM and 512GB of internal storage. A large 5,000mAh battery pack powers this device, which supports 67W wired fast charging. The front houses an 8-megapixel selfie shooter, while the rear packs a 64-megapixel dual camera setup. This is all the information we have at the moment, so stay tuned for more updates.

RELATED:

• Oppo Reno 12 Pro vs Reno 11 Pro: The differences are few & far between
• Oppo Reno 12 vs Oppo Reno 11: Is the upgrade worth considering?
• Oppo Reno 12, Reno 12 Pro launched in China: Curved OLED displays, 50MP triple cameras, & more
• Lenovo Legion Y700 2024: Latest Gaming Tablet with Enhanced Display now available at Giztop
• REDMAGIC Magnetic VC Cooler 5 Pro now available at a discounted price at GeekWills
• Top 6 HyperOS Features You Absolutely Can’t Miss

(Via)

The post New Oppo A3 Pro variant visits TENAA: Upcoming flat display variant of the phone appeared first on Gizmochina.

Earlier this week, a mysterious Huawei smartphone was certified by TENAA. Based on its model number FIN-AL60a, this device is expected to be part of the Huawei Nova 12 series.

Now, the listing of the phone has been updated with its specs and images. At the same time, it has been also certified by 3C.

Based on the information so far, the upcoming Huawei FIN-AL60a could be a variant of the Huawei Nova 12 Lite, which has model number FIN-AL60. However, we are not sure of the product’s official name.

The live pictures of the handset on TENAA confirm that it will look identical to the Nova 12 Lite. Even the specs scream the same and 3C certification reveals that it will also support 66W wired charging,

The 4G-only smartphone will be powered by a chipset featuring an octa-core 2.4GHz CPU. For reference, the Nova 12 Lite houses a Qualcomm Snapdragon 778G SoC with the same CPU clock speed. So the phone could have the same chip.

Further, the device will sport a 6.7-inch centered punch-hole OLED display with a resolution of 2412 × 1084 pixels. It should offer a 120Hz refresh rate and a 1440Hz PWM dimming.

The handset will come with a 50MP primary camera paired with an 8MP ultrawide unit. On the front, it will feature a 60MP selfie camera.

Last but not least, the phone will boot HarmonyOS and will be backed by a 4,500mAh battery.

We have no info on the product’s launch date. However, it should go official soon.

RELATED:

• Huawei FreeLace Pro 2 neckband & FreeClip earbuds new color options to launch alongside the P70 series
• MWC 2024: Honor expands its product lineup with a foldable flip phone and smart ring
• Huawei Enjoy 70z goes official in China with 6.75” display, 13MP dual cameras
• Honor plans to increase its global presence to 50% in next 3 years
• Huawei reveals replacement part costs for new Pocket 2 foldable

The post Huawei FIN-AL60a specs, live images leak via TENAA appeared first on Gizmochina.

Realme 12+ 5G is nearing launch, along with Realme 12 Pro + 5G. Both smartphones have made it through several public certifications and benchmark apps. In addition, the Realme 12+ 5G (RMX3866) has made it to China’s MIIT certification with photos. Interestingly, the Realme 12+ 5G global model code RMX3867 slightly differs from the Chinese variant’s model code RMX3866. However, alongside the global launch of the Realme 12 Pro Series on January 29, we expect the Realme 12+ 5G to debut.

The MIIT listing with photos unveils design details for the upcoming smartphone. The smartphone seems to feature a quad-rear camera with an LED flash, quite similar to a Realme 11-like camera module design. A vertical line with a metallic color seems to divide the rear side into two exact portions. Realme branding is visible on the rear-bottom side of the smartphone. Further, there are volume rockers and a power button on the right side of the smartphone.

The Realme 12+ 5G design is quite familiar with the upcoming Realme 12 Pro series.

Realme 12+ 5G Specifications (Expected)

Realme 12+ 5G has already made it to Thailand’s NBTC, Malaysia’s SIRIM, TKDN, SDPPI, TDRA, TUV Rheinland, and FCC certification.

Concluding the specifications, the Realme 12+ 5G includes a 16-megapixel front camera and a rear camera setup with a 64-megapixel primary camera and an 8-megapixel auxiliary lens. The device is expected to feature a 5,000mAh battery with 67W fast charging support. It may run on Realme UI 5 based on Android 14, and offer NFC connectivity. Additional details about the device are yet to be revealed.

On the other hand, the Realme 12 Pro+ was spotted with a Snapdragon 7s Gen 2 chipset and 12 GB of RAM on Geekbench. It is speculated that the Pro model may feature the Snapdragon 6 Gen 1 chipset. Both devices are expected to come with a 6.7-inch FHD+ 120Hz AMOLED display and a 5,000mAh battery supporting 67W fast charging. The Realme 12 Pro will have a 16-megapixel front camera and a triple camera setup on the back, while the 12 Pro+ is rumored to feature a 32-megapixel selfie camera and a more advanced triple camera setup on the rear.

Related:

• Realme 12 Pro Max appears briefly on Flipkart, key specifications, price leaked
• Realme 12+ 5G bags multiple certification, key specifications revealed
• OnePlus partners with Pixelworks to Elevate Mobile Gaming Experience on the OnePlus 12
• Best of CES 2024 – Products that stood out this year!
• Big Discount: AOOSTAR R1 N100 NAS Mini PC Only For $159
• Get latest Oneplus 12 Phone for $699 on Geekwills

The post Realme 12+ 5G Surfaces on MIIT with Photos, Resembles Realme 12 Pro Series appeared first on Gizmochina.

Recently, details about a new smartphone, believed to be the Nubia Z50 SE (model NX715J), surfaced on the Ministry of Industry and Information Technology (MIIT) website.

Nubia Z50 SE TENAA Images:

The images highlight that the phone follows the Nubia Z50 series design, showcasing a rear triple-camera setup enclosed in a rectangular module. The model certified is black with a curved screen on the front, though further specifications remain undisclosed. It features volume rocker buttons and a red-tinted power button on the right side. On the back, it sports a triple camera setup accompanied by an LED flash. As pointed out by GSMArena, the device looks a lot like Axon 50 Ultra.

The phone has also secured 3C certification recently, which indicates it’s packaged with an 80W charger. Nubia has been proactive in its lineup expansion. Evidence of two other devices, the Nubia Z60 Ultra, and Nubia Z60 Fold, bearing codenames NX721J and NX801J respectively, have been found on the GSMA IMEI database. However, these are yet to receive their 3C certification.

The standard Nubia Z50 launched last year boasts features such as the Snapdragon 8 Gen 2 processor, LPDDR5X RAM, UFS 4.0 storage, and a 6.67-inch 144Hz curved screen. Its rear camera array includes a 64-megapixel main camera (using the Sony IMX787) and a 50-megapixel ultra-wide-angle macro dual lens. Additionally, it utilizes a 5000mAh battery, also compatible with 80W fast charging.

Also, Nubia recently introduced the Z50S model quietly, equipped with a 6.67-inch 144Hz curved display and a Snapdragon 8 Gen 2 processor. This model also comes with 12GB RAM and a 5000mAh battery. It’s priced starting at 2,199 Yuan ($300) in China.

The official launch date for the Nubia Z50 SE remains unspecified.

RELATED:

• Nubia Z60 Ultra, Red Magic 9 series to feature Snapdragon 8 Gen 3
• Nubia Z60 Ultra’s Geekbench listing spotted, reveals Snapdragon 8 Gen 3, Android 14
• Nubia Z60 rumored to feature Snapdragon 8 Gen 3, upgraded under-screen camera
• Redmi Pad SE vs OnePlus Pad Go: Specs Comparison
• Samsung Galaxy Tab A9 vs OnePlus Pad Go: Specs Comparison
• What are Software Firewalls And Their Essential Role In Cybersecurity

(Source)

The post Nubia Z50 SE appears on TENAA, design revealed appeared first on Gizmochina.

An unknown Huawei smartphone with the Mate 50 series-like design was certified by TENAA late last month. It appeared on the portal alongside a P60 series lookalike phone from the company.

Now, a few days later, the specs of these devices are live on TENAA. As we have already covered the handset with a P60-like design, let’s take a look at the Mate 50 lookalike in this article.

This forthcoming Huawei-branded phone with Mate 50 series-like design bears the model number CTR-AL20. It will also come with budget specs like the P60 version but will be better.

Huawei CTR-AL20 will offer budget-level specs but with Mate 50 series design

This device will be built around a 6.7-inch centered punch-hole display. This LCD screen will offer an FHD+ resolution (2388 × 1080 pixels), unlike the HD+ resolution on the other model.

It will be limited to 4G but will be powered by a different SoC. This unnamed chip’s octa-core CPU will be faster at 2.4GHz instead of 2GHz.

The handset will come with 8GB/12GB RAM and 128GB/256GB storage. As for software, it will ship with HarmonyOS.

Further, this phone will sport a 108MP main camera compared to a 50MP sensor on the other device. However, the 2MP secondary sensor and the 8MP front-facing shooter will remain the same.

The handset will lack a nano memory card slot but will feature a side-mounted fingerprint sensor. Finally, it will draw energy from a smaller 4,900mAh battery (rated capacity).

So far, we have no info on the official marketing name of Huawei CTR-AL20 and its launch date.

RELATED:

• Huawei Eyes Smartphone Comeback with 70 Million Shipments in 2024, Despite US Sanctions
• Upcoming Vivo V2318A, V2317A phones’ specifications leaked via TENAA certification
• First smartphone with Huawei’s OpenHarmony OS unveiled for developers
• Huawei preps for market demand with 45 million Kirin 9000S chips
• Honor Play 8T Pro appears on TENAA, Specs Detailed

Source / Via

The post Huawei CTR-AL20 is an upcoming budget smartphone with Mate 50 series design appeared first on Gizmochina.

At the end of last month, a mysterious Huawei smartphone resembling the P60 series was listed on TENAA with images. It was accompanied by yet another device that mimicked the Mate 50 series.

Now, a couple of weeks later, the listings of these phones have been populated with their specs. Let’s check out the features of the P60-lookalike handset in this article. You can view the specs of the Mate 50 version here.

The upcoming smartphone with Huawei P60 series-like design bears the model number FGD-AL00. It only has the looks of a premium device as the specs are what you find on budget models.

Huawei FGD-AL00 is a P60 series lookalike with budget-level specs

First and foremost, the handset will be limited to 4G connectivity. It will be powered by an unnamed chip comprising an octa-core CPU clocked at 2GHz. On the software front, it will boot HarmonyOS.

The phone will sport a 6.75-inch display with a centered punch-hole display. This LCD screen will offer a resolution of 1600 x 720 pixels (HD+).

The product will house a dual camera setup on the rear consisting of a 50MP primary sensor and a 2MP secondary sensor. On the front, it will have an 8MP snapper.

For biometrics, the device will use a side-mounted fingerprint sensor. It will also have support for Huawei’s proprietary nano memory cards.

The handset will come with 6GB/8GB RAM and 128GB/256GB storage. Last but not least, it will be backed by a 5,900mAh battery (rated capacity).

As of now, there’s no info on this product’s official marketing name and launch timeline.

RELATED:

• Huawei Eyes Smartphone Comeback with 70 Million Shipments in 2024, Despite US Sanctions
• HTech to begin manufacturing Honor smartphones in India in early 2024: Madhav Sheth
• First smartphone with Huawei’s OpenHarmony OS unveiled for developers
• Huawei preps for market demand with 45 million Kirin 9000S chips
• Honor Play 8T Pro appears on TENAA, Specs Detailed

Source / Via

The post Huawei FGD-AL00 arrives on TENAA with P60 series design and budget-level specs appeared first on Gizmochina.

Following the Honor Play 7T series launch early this year, and Honor Play 8 in July, the company is preparing to launch Honor Play 8T Series this quarter. The Honor Play 8T Pro surfaced on China’s TENAA database revealing some key details.

Must See: Honor Play 50 Plus launched with 6.8-inch 90Hz display, 50MP dual cameras, 6,000mAh battery

Honor Play 8T Pro Specifications as per TENAA

The new Honor’s mid-range smartphones will bundle a 6.7-inch IPS LCD display having Full HD+ resolution and a 90Hz refresh rate. These specifications are identical to the Honor Play 7T Pro. Further, it will house an octa-core chipset coupling 2.4GHz clock speed. Unlike its predecessor, the smartphone will be available in four different RAM and storage configurations – 6/8/12/16 GB RAM and 128/256/512GB/1 TB Storage variants.

In the camera department, there will be a dual-rear camera module featuring a 108MP primary sensor and a 2MP secondary camera. There’s an 8MP front-facing camera for selfies and video calling.

The TENAA listing also confirms the presence of a 4500 mAh battery with 35W fast charging. In terms of capacity, the Honor increased the battery size but reduced the charging speed in comparison with the Honor Play 7T Pro’s 4000mAh battery and 40W fast charging support.

The new phone will come with Android 13-based Magic OS 7.2 skin on the top. It is expected to launch later this month in China.

Additionally, it could be some rebrand of the old Honor smartphone as the Honor Play 7T Pro is also the rebranded version of the Honor X40i which launched in July 2022.

Related:

• Honor Magic Vs 2 Spotted On Geekbench Ahead Of Launch This Week
• HTech to begin manufacturing Honor smartphones in India in early 2024: Madhav Sheth
• Honor Play 50 Plus launch date, key specifications, design confirmed
• Huawei Mate 60 RS Ultimate vs Honor Magic5 Ultimate: Specs Comparison

(via)

The post Honor Play 8T Pro appears on TENAA, Specs Detailed appeared first on Gizmochina.

Redmi‘s new Note 13 series models have begun to surface online, with multiple appearances on various certification sites. The Note 13 series is expected to launch sometime this winter. While we eagerly await the official release, both the Redmi Note 13 Pro and Redmi Note 13 Pro models have recently surfaced on TENAA. This Chinese authority has unveiled the key specifications of these upcoming phones.

The forthcoming Redmi Note 13 Pro and Pro+ smartphones have received certification from the Telecommunication Equipment Certification Administration (TENAA) in China. The two phones have model numbers 23090RA98C and 2312DRA50C. However, it is not yet known which model number corresponds to which phone.

Both smartphones have 5G connectivity and the same size measuring 161 x 74 mm. Xiaomi includes 6.67-inch OLED displays with 2,712 x 1,220 pixels resolution on the two phones. If previous rumors are to be believed, the handsets will offer a 144Hz refresh rate. TENAA suggests the upcoming Redmi Note 13 series phones will be equipped with two different processors with clock speeds of 2.4GHz and 2.8GHz. They might be equipped with Dimensity 9200 Plus.

The Note 13 Pro is said to be offered in 6GB, 8GB, 12GB, and 16GB of RAM, as well as storage options of 128GB, 256GB, 512GB, and a whopping 1TB. The handset might weigh in at 187 grams. Powering the smartphone could be a 5160mAh (typical) rated battery.

In contrast, the Note 13 Pro+ could also be available with a staggering 18GB of RAM, alongside storage choices of 128GB, 256GB, 512GB, and 1TB. The Pro+ variant will likely be supported by a 5000mAh (typical) rated battery. Both smartphones could feature a triple rear camera setup, headlined by a mighty 200MP primary sensor. This primary sensor might be complemented by an 8MP ultra-wide-angle lens and a 2MP macro lens.

Judging by the specifications, the phones should offer good bounce for the ounce. However, it’s wise to take these preliminary specifications with a pinch of salt.

RELATED:

• Redmi K60 Ultra is nearly a flagship at mid-range price: A brief history of Redmi K Ultra lineup
• Xiaomi ups its update game with 5 years of software support on Redmi K60 Ultra
• An unknown Redmi phone slated to release in September or later appears online
• Redmi A2 Plus now comes with 128GB storage in India for the same price
• Xiaomi drops software support for Redmi Note 9, Redmi 9, and Poco M2

(Via)

The post Alleged Redmi Note 13 Pro and Note 13 Pro+ key specifications leaked via TENAA appeared first on Gizmochina.

Three Oppo phones with similar model numbers, namely PJA110, PJC110, and PJG110, have appeared in the database of China’s TENAA certification site. Despite the close model numbers, these phones appear to be different devices. The PJC110 handset has already made its debut as the Oppo K11 5G, while the PJA110 seems to be the upcoming OnePlus Ace 2 Pro. However, the specifications and images of the PJA110 are yet to be revealed by the TENAA listing. Interestingly, the PJA110 is expected to share the same design as the OnePlus 12R, which is believed to be a renamed version for the global market. As for the PJG110, it remains a mysterious phone as no information is currently available about it. Fortunately, images of the Oppo PJG110, which reveal its design, are available in TENAA’s database.

OPPO PJG110 design

According to the TENAA images, the PJG110 showcases a curved-edge AMOLED display with a cantered punch-hole design. It seems to be equipped with an under-display fingerprint scanner. The right side of the phone features a volume rocker and a power key.

There is a circular camera module housing three cameras and an LED flash on its rear panel. Further details about the smartphone’s specifications are yet to be reported, so it’s recommended to await additional information. Some sources have claimed that it could be the OPPO A2 Pro 5G smartphone, but there is no concrete evidence to support this claim.

In related news, Oppo’s next major launch event is likely to be held in China in August. The event may see the arrival of the Find N3 foldable phone, the Oppo Pad Air 2 mid-range tablet, and the Oppo Watch 5 series. Recent reports have claimed that the Find N3 and Pad Air 2 will be released in the global market later.

What do you think the PJG110 smartphone could be? Share your speculations and thoughts in the comments section below.

RELATED:

• Oppo A78 4G India launch tipped, price range emerges
• After China, the Oppo Pad Air 2 will also launch in India: Report
• Oppo A58 4G with 6.72″ FHD display, Helio G85 SoC & 50MP dual cameras
• Best Action Cameras 2023: Insta, GoPro, DJI & More
• Realme Narzo 60 5G Review: A budget phone that looks great, runs smooth

The post Upcoming OPPO PJG110 smartphone’s images appear at TENAA, likely to launch soon appeared first on Gizmochina.

A new Coolpad smartphone has been certified by TENAA. The handset is listed on the portal with its real-life images and some specs.

Interestingly, the features of the phone are somewhat identical to the recently released Coolpad Grand View 40s. Let’s go through the details.

The upcoming Coolpad phone bears model number CP17. However, it appears to be almost the same as CP16t (Coolpad Grand View 40s).

As per the pictures, the smartphone will resemble the Xiaomi 11 Lite NE from behind. But on the front, it will be fitted with a display sporting a dewdrop notch.

It is said to be built around a 6.52-inch display. This LCD panel will offer a resolution of 1600 x 720 pixels (HD+).

On the rear, the handset will be equipped with a dual camera setup. The system will comprise a 13MP primary shooter and an 8MP ultra-wide unit. Whereas, on the front, it will sport a 5MP snapper for selfies and video calls.

Finally, the device will measure 8.48mm in thickness and weighs 193g.

If it is indeed a variant of CP16t, the CP17 could be powered by a MediaTek Dimensity 700 chipset. It may be backed by a 4,500mAh or similar-sized battery.

The device might go official silently or it could get announced via social media. Just like other Coolpad products, this one will most likely remain exclusive to China.

RELATED:

• Coolpad Cool 30 budget smartphone now up for pre-order in China; price starts at 699 yuan ($102)
• Coolpad Cool 20s launched with 90Hz display, Dimensity 700, and 50MP camera
• Best Gaming Controllers of 2023: Enhance Your Gaming Experience
• Hands-on with Infinix Note 30 5G before June 14 India launch
• Best Designed Smartphones of 2023

The post Coolpad CP17 arrives on TENAA with images and specs appeared first on Gizmochina.

Vivo is apparently working on two new smartphone models from its popular Y series. The new devices include the new Vivo Y35+ and the Y35m+ models, which has been spotted on various certification websites that hint at their near launch. So let’s have a look.

Vivo Y35+ & Y35m+ launch could be near after various certification sightings

The Y35+ and the Y35m+ models were spotted on the Google Play supported device list as well as the 3C and TENAA certification websites. Looking at these listings, we can see that the new devices have been spotted carrying the V2279A model number. In other words, there are two devices carrying the same model number but with different monikers. The 3C listing revealed the battery and charging speed of this device. It will be powered by a large 5,000mAh battery pack (4,900mAh rated) and 18W fast charging support.

Furthermore, the device will also feature a 50 megapixel primary camera on the rear, while the front houses an 8 megapixel selfie camera. Based on the certification, the upcoming smartphones will measure 8.07mm in thickness and weigh 190 grams. The TENAA listing also revealed that the V2279A model number will be a 5G enabled handset that that will feature an octa core processor with a 2.2GHz frequency. Vivo had launched the Y35m earlier this year with a Dimensity 700 SoC, so we can expect another MediaTek chip.

This chipset will be paired with up to 16GB of RAM and 512GB of storage. It is unclear why two devices with slightly different names carry the same model number, but it likely refers to rebranding in different market. Keep in mind that this report is based on just certifications so stick around for more as we will be providing updates when additional information is available regarding this matter.

RELATED:

• Vivo Y78/Y78m visits Geekbench with Dimensity 930 & 12GB RAM
• Vivo X90S spotted with Dimensity 9200 & 12GB RAM on Google Play Console
• Upcoming Smartphones in May 2023: Poco, Google, Sony, Oppo, and more
• Here’s Probably Why You Should Avoid Buying Samsung ACs in India
• Vivo X Fold2 vs Samsung Galaxy Z Fold4: Specs Comparison

(Via)

The post Vivo Y35+ & Y35m+ key specs revealed via various certification sites appeared first on Gizmochina.

The Realme 11 series is set to launch sometime next month. The company has been teasing these upcoming devices ahead of the China announcement, but prior to the launch, the design of the base model has been revealed via a TENAA sighting.

Just earlier this week, we had reported on the Realme 11 Pro+ model being spotted on the same certification website. The listing revealed its design as well as some of its key specifications. This includes a Dimensity 7 series chipset that clocks in at 2.6GHz. So now, we also have a proper look at the base Realme 11 model. Looking at the TENAA sighting, the device carries the model number RMX3751.

Looking at the images on TENAA, the Realme 11 5G model sports a flat display with rounded corners. The front also houses a punch hole selfie camera on the top left corner. On the other hand, the rear features a large circular camera island, similar to the higher end Realme 11 Pro+ model as well. As of right now, finer details regarding this device like its specifications and pricing. Although, the various teasers have revealed its official launch timeline.

The Chinese smartphone maker is gearing up to unveil the new Realme 11, 11 Pro, and 11 Pro+ model in May in its home market. Based on what we know so far, the vanilla model is believed to feature a 64 megapixel triple camera setup on the rear, while the front could sport a 6.6 inch AMOLED display. The smartphone could also be powered by a MediaTek Dimensity 900 chipset.

RELATED:

• Realme 11 Pro+ tipped to come with new Dimensity 7-series chip
• Realme Narzo N55 first sale today, offers 90Hz screen, Helio G88, 64MP dual cameras for Rs 10,999 (~$134)
• Realme 11 series confirmed to launch in May, Realme 11 Pro+ with 200MP camera expected
• Redmi Note 12s vs Redmi Note 12 Pro 4G: Specs Comparison
• Here’s Probably Why You Should Avoid Buying Samsung ACs in India

(Source)

The post Realme 11 5G design revealed, surfaces on TENAA appeared first on Gizmochina.

Realme has been working on its upcoming device, the Realme 11 Pro, which has recently passed the TENAA certification with model number “RMX3770” in China. This certification has revealed some key features of the device, including a circular camera module and a centered punch-hole curved display.

As per the renders shared on the TENAA website, the Realme 11 Pro will come with a centered punch-hole display with a curved screen. Moving to the back of the device, it will sport a circular camera module with the primary camera sensor placed in the center, accompanied by two secondary lenses on either side and an LED flash above them. The design of the camera module is a departure from Realme’s previous rectangular camera modules, adding a new and unique look to the phone. The Realme branding is also there in the back panel.

Apart from this, according to a leak from Digital Chat Station, the Realme 11 Pro is expected to feature MediaTek’s latest Dimensity chipset with 5G and is likely to launch in May 2023. However, no further details regarding the specifications of the device have been revealed yet.

The device has also cleared TKDN and Bluetooth SIG certifications, suggesting that it will support Bluetooth 5.2 connectivity and will be available in Indonesia.

Realme has been known for providing feature-rich smartphones at an affordable price point, and the Realme 11 Pro is expected to continue that trend. With the latest MediaTek chipset and the curved punch-hole display, the device is expected to deliver a premium user experience.

Realme has not officially announced the launch date of the Realme 11 Pro yet, but the TENAA certification indicates that it could be soon.

RELATED:

• Realme GT Neo 5 SE Will Arrive With 16GB+1TB Storage Option
• Upcoming Smartphones: OnePlus Nord CE 3 Lite and Realme GT Neo 5 SE
• Realme Narzo N55 leaked image appears, launch date tipped
• Over 100,000 Realme C55 units were sold in just 5 hours after launch
• Realme Narzo N55 to Launch in India in April, Memory and Color options tipped

The post Realme 11 Pro passes TENAA certification with a circular camera module appeared first on Gizmochina.

Asus is working on the ROG Phone 7 series gaming smartphones. So far, the ROG Phone 7D has visited Geekbench, while the ROG Phone 7 made appearances on both Geekbench and 3C certification websites. Now, the ROG Phone 7 Global variant has also been TENAA certified, so let’s check out the findings.

ASUS ROG Phone 7 TENAA

The ASUS ROG Phone 7 global variant, identified as model number AI2205_B, has been spotted on TENAA, indicating an imminent launch. The listing on TENAA has confirmed that the phone will be equipped with a 5850mAh battery, similar to previous ROG gaming phones, but ASUS may market it as having a typical capacity of 6000mAh. Additionally, the listing revealed that the phone will feature four camera sensors, with a single front camera and a triple-camera setup on the back. However, no information regarding the camera specifications was disclosed. The phone is expected to support multiple 5G bands, such as n41, n78, and n79.

Previous reports have revealed that the ROG phone 7 will feature a Qualcomm Snapdragon 8 Gen 2 SoC with a peak clock speed of 3.19GHz. According to the listings, the device is expected to come with Android 13 and 16GB of RAM.

Further information about the ROG Phone 7 has been obtained from the 3C certification website, confirming that the device will support 65W fast charging. The phone is expected to boast a 6.8-inch AMOLED display with a Full HD+ resolution and 165Hz refresh rate support. Currently, there is limited information available regarding the other features of the ROG Phone 7 series, but we will provide more details as they become available.

RELATED:

• Asus ROG Phone 7 Appears on Geekbench & 3C Website With Key Specs
• Nubia Red Magic 8 Pro Transparent Silver Edition Launched
• Black Shark 6 Prototype Surfaces Online With a Price Tag of 3900 Yuan ($564)

The post Asus ROG Phone 7 gets TENAA certified, large battery capacity revealed appeared first on Gizmochina.

Huawei is gearing up to host a major launch event in China later this month. However, prior to this conference, a mysterious new smartphone model was recently spotted on the TENAA certification website.

For those unaware, any device that will launch in China has to pass through TENAA, which means that this unknown handset model is set to launch soon. In other words, it is likely that the Chinese tech giant could launch this device during this event. Looking at the TENAA (China’s Telecommunication Equipment’s Network Access Management) listing, we can see that Huawei is working on a new smartphone that carries the model number STG-AL00. With the Huawei Enjoy 60 series expected to launch soon, this device could be a part of this new lineup.

The listing also reveals that the device in question will support 4G LTE networking and run on HarmonyOS operating system. This certification also featured live images of the mystery Huawei phone which basically reveals the entire design of the upcoming smartphone. On the front, the device appears like any other smartphones with a speaker system on the top center while the selfie camera is situated right beside it. 

On the other hand, the rear packs an Oreo-like large circular camera module. This module houses what appears to be three image sensors and a fourth cutout for the LED flash. Furthermore, the round camera island is surrounded by a golden colored ring, which makes it appear quite premium. This is the only major aspect of the rear panel, with the HUAWEI branding on the bottom half being the only other visible feature.

RELATED:

• Leak Reveals Four New Colors of Huawei P60 Pro
• Alleged Huawei P60 Pro Passed National 3C Quality Certification, Supports 100W Fast Charging
• Huawei Enjoy 60 to Launch with Kirin 710A and Dual-Ring Camera
• Best 1080P monitors available for purchase in 2023
• Best Ergonomic Mouse 2023: Logitech, Microsoft & More

(Via)

The post Mysterious Huawei Phone spotted on TENAA with a Round Oreo-like Camera module appeared first on Gizmochina.

Back in December 2022, the Wiko 5G (rebranded Huawei Nova 9 SE) was officially launched in China as a smartphone that supports the newer and faster bandwidth and runs on Huawei’s HarmonyOS. Now, it appears that a brand is working on another new 5G enabled handset. So here are all the details.

A new Wiko 5G device has recently passed through China’s TENAA certification website. For those unaware, every device sold in the region has to pass through this certification ahead of official release, so it is clear that the company is working on a new 5G smartphone. Unfortunately, finer details regarding this device like its specifications and pricing are still at large. Although, we know that is carries the model number GAR-AN00.

Furthermore, this device will run on HarmonyOS, which is Huawei’s proprietary operating system, and is approved to support 5G networking as well. The previous Wiko 5G model was equipped with the Qualcomm Snapdragon 695 SoC, so it is possible that the next gen model will also feature a Qualcomm Snapdragon series SoC or maybe even a MediaTek Dimensity chip. It is unclear if this model will be a more expensive model compared to the Wiko 5G which is a mid range device.

This model sported a tall 6.78 inch LCD panel that has a Full HD+ resolution, a center aligned punch hole selfie camera, and a high 120Hz refresh rate. The device was powered by a 4,000mAh battery pack that supports 66W fast charging as well. The Wiko 5G was launched in China for 1,999 Yuan (roughly 290 US Dollars), so we can expect the next gen model to be around this same price point or possibly higher if its similar to a flagship grade device.

RELATED:

• Wiko 5G, Rebranded Huawei Nova 9 SE, Goes Live for Sale
• Wiko 5G Phone Launched Running HarmonyOS; Offers 108MP Samsung HM2 Sensor
• WIKO to Launch a 5G Smartphone Running Huawei’s HarmonyOS on December 27
• Best Video Editing Apps for iPhones in 2023
• Honor Magic Vs vs Honor Magic5 Pro: Specs Comparison

The post New Wiko 5G Smartphone Spotted on TENNA with 5G & Huawei’s HarmonyOS appeared first on Gizmochina.

After launching the Realme GT Neo 5 in China, the brand is gearing up to launch another model under the GT Neo banner called the Realme GT Neo SE. Key specifications of this upcoming device have already leaked, and it was also recently spotted on 3C certification. Now, the device has made an appearance on the TENAA certification database hinting at its imminent launch.

Spotted my tipster Mukul Sharma, the Realme GT Neo SE bears the model number RMX3700. The listing does not reveal any information regarding the specifications, so let’s take a look at the previous leaks for more details.

Realme GT Neo 5 SE specs (rumored)

The Realme GT Neo 5 SE is anticipated to be a more affordable variant of the Realme GT Neo 5. It will lack the flashy C-shaped RGB lighting unit found on the GT Neo 5’s back panel. However, it is speculated to sport a large 6.74-inch OLED screen with a resolution of 2722 x 1240 pixels and a refresh rate of 144Hz. The phone is expected to be powered by the upcoming Snapdragon 7 Plus Gen 1 chipset, and it may come with a sizable 5,500mAh battery that supports 100W charging.

On the front, the GT Neo 5 SE will likely feature a 16-megapixel front-facing camera, while the rear camera system is said to consist of a 64-megapixel primary lens, an 8-megapixel ultra-wide lens, and a 2-megapixel macro camera. The device may run on ColorOS 13-based Android 13 operating system.

RELATED:

• Realme C55 With Dynamic Island-like Mini Capsule Launching Soon in India
• Redmi 12C Makes Its Global Debut, Starting With Indonesia
• [Update] Poco X5 5G Indian Launch Date Confirmed via Teaser, Will Be Priced Below ₹20,000

(via)

The post Realme GT Neo 5 SE Bags TENAA Certification, Could Launch Soon appeared first on Gizmochina.

Oppo‘s upcoming Find X6 flagship smartphones are expected to launch soon. We could see a couple of devices in the Find X6 series debuting in the next few months. It is said that one of these devices will house a MediaTek Dimesnity processor.

The Oppo Find X6 Pro Dimensity Edition previously appeared on the CMIIT database. Now, it has made an appearance on TENAA revealing some information about the battery of the device. According to the listing, the Oppo PHS110 smartphone has a 4880mAh rated capacity battery. It is likely that it will be advertised as 5000mAh at launch. Other than that, the upcoming device will have a triple-camera setup. No further details are revealed through the TENAA listing. Let’s take a look at what’s known about the Find X6 Pro Dimensity Edition as well as the Find X6 Pro so far.

Oppo Find X6 Pro/ Find X6 Pro Dimensity Edition Specs

According to leaked information, the Find X6 Pro Dimensity Edition is expected to be equipped with the recently launched Dimensity 9200 chipset, as well as LPDDR5x RAM and UFS 4.0 storage. Although featuring a different chipset, it is likely to have the same specifications as the Snapdragon 8 Gen 2 variant of the Find X6 Pro.

The Find X6 Pro is rumored to have a large 6.8-inch or 6.9-inch AMOLED display with a Quad HD+ resolution, a 120Hz refresh rate, and an under-display fingerprint scanner. It may also have a 32-megapixel front camera and a triple camera setup on the back panel consisting of a 50-megapixel (Sony IMX890 with OIS) + 50-megapixel (Sony IMX890, ultra-wide) + 50-megapixel (Sony IMX890 or IMX766 telephoto with OIS) camera.

The device is expected to come with a 5,000mAh battery that supports 100W wired and 50W wireless charging and will run on ColorOS 13-based Android 13. The X6 series is rumored to launch in Q1 2023.

RELATED:

• Xiaomi, Oppo, & Others Working on Satellite Communication for Future Phones with Qualcomm
• Leaked OPPO CPH2377 Schematic Fuels Rumors of New OnePlus Phone to Debut Globally
• Vivo V27, V27 Pro Launched in India with 120Hz AMOLED Display, Dimensity 7200 / 8200, 50MP Triple Cameras

(via)

The post Oppo Find X6 Pro Dimensity Edition Appears on TENAA With 4,880mAh Battery, Could Launch Soon appeared first on Gizmochina.

OnePlus is gearing up to launch its third smartphone of the year in China, the OnePlus Ace 2V. The OnePlus president has teased the device, and also confirmed the official name on Weibo.

This latest device is being touted as a performance winner that will “disrupt industry conventions and popularize the flagship experience”. The device has already appeared on AnTuTu and TENAA with the model number PHP110 and has revealed some of its key specifications.

According to the AnTuTu listing, the OnePlus Ace 2V will come with a 120Hz display, a Dimensity 9000 chipset, LPDDR5 / 5x RAM, UFS 3.1 storage, and Android 13 OS. The device has achieved a total score of 1,050,512 on the AnTuTu benchmarks, with impressive scores in the CPU, GPU, memory, and UX tests.

Rumors have suggested that the OnePlus Ace 2V will feature a 6.7-inch AMOLED 1.5K display with a 120Hz refresh rate. It will pack a 5,000mAh battery that supports 80W charging, and it will have a triple-camera setup on the back, including a 64-megapixel main camera with OIS, an 8-megapixel ultra-wide camera, and a 2-megapixel macro snapper. The device will also have a 16-megapixel front camera.

OnePlus is set to launch the Ace 2V in China on March 7, and it is expected to be rebranded as the OnePlus Nord 3 in the global market.

The OnePlus Ace 2V will feature a MediaTek chipset, which is likely to be the Dimensity 9000 or the 9000+ version. The device will have a totally different design compared to the Ace 2 with a Qualcomm processor, featuring a renewed back cover and a triple camera setup inserted in a double rear module. It will also have a large display with a central punch hole and an almost square perimeter frame with slightly rounded corners. The Alert Slider, one of the flagship features of the brand, will be present along the right profile.

OnePlus fans will be eagerly awaiting the launch of the Ace 2V, and it remains to be seen whether it will live up to the company’s promises of disrupting industry conventions and delivering a flagship experience.

RELATED:

• Our Entire MWC 2023 Coverage Here
• OnePlus Launches 45W Liquid Cooling Accessory That Can Reduce Phone Temps by 20°C
• OnePlus 11 Concept with Active Cryoflux Tech Unveiled at MWC 2023
• Leaked OPPO CPH2377 Schematic Fuels Rumors of New OnePlus Phone to Debut Globally
• OnePlus Brings Ray Tracing To OnePlus 11 with Perfect World Games

(Source 1,2)

The post OnePlus Ace 2V Is Coming Soon, Dimensity 9000 Expected appeared first on Gizmochina.

Back in December, the Nubia Z50 went official in China as one of the first smartphones powered by a Qualcomm Snapdragon 8 Gen 2 chipset. It has been two months since then, however, the brand is yet to debut the next models in the lineup.

Looks like that may happen soon. That’s because the top variant in the series seems to have been certified by TENAA. At the same time, its features have been tipped by a reliable leaker.

As per ITHome, an unknown Nubia smartphone has been listed on TENAA. This device bears model number NX712J. The publication suggests that this handset could go official as Nubia Z50 Ultra.

A couple of reliable tipsters have recently revealed a few details about this phone. Hence, there’s a high chance that this mysterious device could be the ‘Ultra’ model of the Z50 family.

The TENAA listing currently does not include the specs. We expect the listing to get populated with specs in the coming days.

According to Digital Chat Station, the upcoming Nubia Z50 Ultra will come equipped with ZTE’s fourth generation under screen front-facing camera. The tech implemented is said to be from BOE.

Further, the display is tipped to offer 2K resolution and curved edges. It will be run by a second-gen display chip.

The phone is expected to house a periscope zoom camera. Last but not least, it is said to be backed by a 5,000mAh battery.

We are looking forward to learning more about the Nubia Z50 Ultra in the coming days.

RELATED:

• Nubia Red Magic 8 Pro Full Review: The Best Gaming Phone Experienced Ever
• Nubia’s First AR Smart Glasses Officially Confirmed to Arrive at MWC 2023
• ZTE Blade V41 Vita 5G With Dimensity 810, 50MP Main Camera Launched
• ZTE Teases the Nubia Pad 3D Launching on February 28 at MWC 2023
• ZTE Libero 5G III Launched: OLED Display, IP57 Rating, and More

The post Alleged Nubia Z50 Ultra Arrives on TENAA appeared first on Gizmochina.

Later today, Oppo will launch two new foldable smartphones in the Chinese market under the Oppo Find N2 series. The traditional foldable smartphone will be called the Oppo Find N2, while the clamshell flip phone will be called the Oppo Find N2 Flip.

Ahead of the launch, some last-minute leaks have revealed the press renders of both of these devices. The devices have also appeared on the TENAA certification website, confirming all key specs. So let’s take a look at the details.

The renders are shared by known leaker SnoopyTech via a tweet. It reveals the complete design of both the Find N2 and the Find N2 Flip.

Oppo Find N2 press renders

First, we have Find N2, which features similar dimensions to the Oppo Find N. The renders reveal that the unfolded display is more square than what is found on foldable smartphones of other brands. In addition to that, the back has a protruding camera island with three cutouts. It reminds us of the camera design of the Oppo Find X5 Pro. There is Hasselblad branding on the camera island, and an LED flash is also present. Lastly. the renders reveal three color options – Green, Black, and White. The Green and White variants appear to have smooth backs (likely glass), while the black version has a leather texture on the rear.

Oppo Find N2 Flip press renders

The second set of images reveals the complete design of the Find N2 Flip. It has a large secondary display on the back of the device that will be used to look at notifications, incoming calls, and as a viewfinder for shooting selfies using the rear cameras. The back has two cameras, while the right edge features two buttons for volume control and power. The power button doubles as a fingerprint scanner. Other than that, we can see that Oppo will offer the Flip phone in three color options – Black, Gold, and Purple.

Oppo Find N2 TENAA

Moving to the TENAA listing, it states that the Oppo Find N2 will measure 132.2×72.6×14.6(mm) and weigh 237 grams. This is quite light compared to other foldables on the market. The listing reveals that the outer display will measure 5.54 inches and will offer a 2120 x 1080p resolution. The inner display, on the other hand, will measure 7.1 inches and will offer 1920 x 1792p resolution. Both of the panels will be AMOLED and produce up to 16 million colors. The Snapdragon 8+ Gen 1 powering the device will have a frequency of 3.00 GHz and it will come paired with 8GB/12GB/16GB RAM and 256GB/512GB storage.

There are a total of five cameras on the device – three on the back with 50MP (Primary), 48MP (Ultrawide), and 32MP (Telephoto 2x optical) resolutions. The remaining two are a couple of front cameras of 32MP placed on each of the displays. Lastly, the device has a dual-cell battery with a 1735mAh+2685mAh capacity. This will likely be marketed as a 4,500mAh battery.

Oppo Find N2 Flip TENAA

The Find N2 Flip’s listing on TENNA reveals that it measures 166.2×75.2×7.45(mm) and weighs 191 grams. The outer display has a screen size of 2.26 inches and a resolution of 720 x 382p. The inner display measures 6.8 inches and has a resolution of 2520 x 1080p. Both of these panels are AMOLED and capable of producing up to 16 million different colors. The Snapdragon 8 Gen 2 chip onboard has a clock speed of 3.20GHz and it comes paired with 8GB/12GB/16GB RAM and 128GB/256GB/512GB storage.

We get a dual camera system on the back with a 50MP primary sensor and an 8MP ultrawide sensor. The front has a 32MP selfie camera. There is a dual-cell battery onboard with a 3040mAh+1150mAh capacity. This will likely be marketed as a 4,300mAh capacity. Lastly, the device comes with a Gravity sensor, distance sensor, light sensor, and fingerprint recognition.

RELATED:

• Here’s how to watch the Oppo Find N2 series launch event
• Oppo Air Glass 2: Lightweight and Durable Smart Glasses with Enhanced Features
• OPPO OHealth H1 announced with 6 built in health data monitoring features for the whole family
• Oppo unveils AndesBrain smart cloud service with cross platform integration
• Oppo’s MariSilicon Y chip brings high-quality audio to Bluetooth devices

(Source 1,2,3,4)

The post Oppo Find N2 series press renders leak, specs revealed by TENAA listing ahead of launch appeared first on Gizmochina.

Samsung is expected to launch its Galaxy S23 series of flagship smartphones sometime in Q1 2023. The series will be led by the Samsung Galaxy S23 Ultra, which has already appeared on the FCC certification database and Geekbench. Now, the device has also appeared on China’s TENAA database revealing a lot of the key specifications of the device.

According to the listing, the bearing model number SM-S9180 has a 6.8-inch screen with a resolution of 1440 x 3088 pixels and 16.7M colors. The smartphone weighs 233g and has dimensions of 163.4mm, 78.1mm, and 8.9mm. A performance core clocked at 3.36GHz rather than 3.2GHz appears to be part of a custom-built (overclocked) Snapdragon 8 Gen 2 SoC. The smartphone also appears to include 8/12 RAM and storage options of 256GB, 512GB, and 1TB.

The listing makes a major reveal, which is that the Galaxy S23 Ultra will come with a 108MP primary camera rather than the rumored 200MP camera, which has been the most anticipated feature of the device so far. Going by this information, it is most likely the same 108MP ISOCELL HM3 sensor that is present in the current-gen S22 Ultra. Other than that, a 12MP telephoto, a 12MP ultra-wide, and another 2MP sensor will also be present on the rear camera module of the device. As for the front, the smartphone will have a 12MP selfie snapper.

The device will also have a gravity sensor, distance sensor, light sensor, and under-screen fingerprint reader. On the connectivity front, the listing says that the Galaxy S23 Ultra features NR SA bands – Band 79, Band 78, Band 41, Band 28, N1,2110-2155MHz, and NR NSA bands (Band 41, Band 78, and Band 79).

RELATED:

• Samsung Galaxy A54 5G appears on Geekbench with Exynos 1380 SoC
• Samsung Galaxy S23 Series May Come With 25% Camera Performance Boost
• Samsung Electronics DX Division Shifts to Emergency Mode; Cuts Off Expenses

The post Samsung Galaxy S23 Ultra TENAA listing reveals 108MP primary camera appeared first on Gizmochina.

Nubia‘s gaming-focused sub-brand, Red Magic, is gearing up to launch the Red Magic 8 Pro soon. The device was earlier spotted on China’s TENAA database revealing some key specifications of the smartphone.

Now, the TENAA listing has added the images of the Red Magic 8 Pro, revealing its complete design. The images reveal that the smartphone follows a boxy design language similar to the Galaxy S22 Ultra. The back panel appears to be transparent, similar to the Nothing Phone (1), and just like that device, the Red Magic 8 Pro only shows an outline of the internal components. The camera module with three cameras is placed in the center, with the LED flash placed on top.

The display appears to be surrounded by some thin bezels on the front, as there is no visible notch cutout. The phone’s frame is flat as well, and the volume buttons are located on the left side. A power button on the right edge also serves as a fingerprint scanner. The TENAA listing has previously revealed a bunch of specification details of the Red Magic 8 Pro, so let’s recap.

Under the hood of the Red Magic 8 Pro is the mobile Snapdragon 8 Gen 2 platform. It will have up to 16 GB of RAM and up to 1 TB of storage, so it should be available in a variety of configurations. Most likely, the gaming phone will use LPDDR5 RAM and UFS 4.0 storage to provide an excellent gaming experience.

There will be two battery sizes available for the Red Magic 8 Pro: 5,000mAh and 6,000mAh. The device will provide up to 165W of fast charging, according to the 3C listing. Android 13 OS is probably preinstalled on it. It sports a 16-megapixel selfie camera hidden beneath the display. A 50-megapixel + 8-megapixel + 2-megapixel triple camera set is located on the phone’s rear panel. The phone’s dimensions and weight are 163.98 x 76.35 x 8.9mm and 228 grams, respectively.

Although the brand is yet to make any announcements regarding the launch of this device, we expect the Red Magic 8 Pro to make its debut by the end of this month or in January 2023.

RELATED:

• Red Magic 8 Pro Gaming Phone’s Specifications Leaked
• Redmi K60E Confirmed to Feature New Dimensity Chip
• Black Shark working on Snapdragon 8+ Gen 1 powered phone, with 64MP triple cameras

(Via)

The post Red Magic 8 Pro TENAA images reveal design – transparent back, possible UD camera appeared first on Gizmochina.

Vivo is expected to launch a new budget 5G smartphone in China very soon. An unknown device from the company with model number V2156FA was certified by TENAA last month.

A few weeks later, the listing has been now populated with specs and images. Going by the details, we believe the product could be an affordable 5G handset.

According to TENAA, the upcoming Vivo V2156FA  will sport a 6.58-inch display with a resolution of 2408 x 1080 pixels (FHD+). The type of panel will be TFT LCD.

The phone will be powered by a chipset featuring a 2.2GHz CPU. It will come with 6GB/8GB/12GB RAM and 128GB/256GB/512GB storage.

Further, the handset will arrive with a 50MP rear camera assisted by an 8MP shooter. On the front, it will have another 8MP snapper for selfies and video calls.

Though there’s a mention of an under-display fingerprint sensor, the smartphone will most likely come with a side-mounted fingerprint sensor.  It will also feature a MicroSD card slot for storage expansion.

The phone will get its juice from a 4,005mAh battery (rated). Last but not least, it will measure 163.84 × 75.00 × 7.79mm in dimensions and weigh 175g.

The Vivo V2156FA will most probably get a silent launch in China, just like almost all budget Vivo smartphones.

RELATED:

• iQOO 11 spec sheet leaked – SD8 Gen 2, last-gen cameras with V2 ISP chip & 120W fast charging
• Vivo S16, S16e, S16 Pro chipset, color variants tipped well before launch
• Vivo X90 Pro+ render based on leaks appear, could be the final design
• Vivo opens huge flagship experience store in Bengaluru, India
• Vivo V25 4G tipped to launch in India by mid-November

The post Vivo V2156FA Key Specs Leak via TENAA appeared first on Gizmochina.

At the end of August, a mysterious Oppo smartphone with model number PHJ110 was certified by TENAA. Now, almost two months later, the listing of the phone has been populated with the key specs.

As per the listing, the handset will likely be a budget 5G smartphone. Let’s take a look at the features it will offer.

According to TENAA, the upcoming Oppo PHJ110 will flaunt a 6.56-inch display (TFT LCD) with a resolution of 1612 x 720 pixels (HD+) and 16.7 million colors. It might have at least a 90Hz refresh rate though it is not mentioned.

The device will be powered by a chipset comprising a 2.2GHz CPU. The chip will be paired with 6GB/8GB RAM and 128GB/256GB storage.

Interestingly, despite sporting an LCD screen, the phone is said to house an under-display fingerprint sensor. We believe it could be a typo and the handset could actually come with a side-mounted fingerprint sensor.

Further, the device will feature a MicroSD card slot (up to 1TB). It will arrive with a dual-camera system on the rear consisting of a 13MP primary sensor and a 2MP secondary snapper. On the front, it will have an 8MP shooter for selfies and video calls.

It will be backed by a 4,880mAh battery (rated). The typical value could be 5,000mAh. Last but not least, the smartphone will measure 163.8 x 75.1 x 8.0 mm in dimensions and weigh 188 g.

The Oppo PHJ110 will most probably go official in China without any fanfare, like any other budget handsets from the brand.

RELATED:

• New OPPO smartphone equipped with IMX890 main camera, MariSilicon X chip in the works
• Oppo Find N2 to feature Snapdragon 8+ Gen 1 & 120Hz LTPO AMOLED display: Tipster
• OPPO Watch SE smartwatch with eSIM support, 10 days battery life launched
• Oppo unveiled the Reno8 Pro House of the Dragon Limited Edition set
• OPPO Reno 9 specifications leaked well before launch

The post Oppo PHJ110 Will be a Budget 5G Smartphone: TENAA appeared first on Gizmochina.

ZTE is not a popular smartphone brand worldwide despite being in the business for years. Yet, the company keeps releasing new models across its three brands, namely ZTE, Nubia, and Redmagic.

Back in late August, an alleged 10th Anniversary Edition of the Nubia Z40 handset received 3C certification. Two months later, this phone has been now certified by TENAA revealing some of its key features.

An upcoming Nubia-branded smartphone with model number NX703J has cleared TENAA certification. This device was earlier certified by 3C and was revealed to ship with a 66W charger.

As per TENAA, the 5G-enabled phone will be built around a 6.67-inch OLED display with a resolution of 2400 x 1080 pixels (FHD+) and 10-bit color depth. It will be powered by an unknown chipset with a maximum clock rate of 3.2GHz.

The handset will come with a 108MP rear camera accompanied by an 8MP shooter. On the front, it will sport a 16MP snapper. Since the number of cameras is listed as 5MP, the device may feature two more sensors on the back.

Further, the smartphone will arrive with an under-display fingerprint sensor and a 4,900mAh battery (rated). The typical value of the battery should be 5,000mAh.

Last but not least, it will be available in multiple storage options, such as 128GB, 256GB, 512GB, and 1TB.

We are looking forward to learning more about this so-called Nubia 40 10th Anniversary Edition in the coming days as the brand has also started teasing it officially.

RELATED:

• ZTE Axon 30S with under-display camera goes official in China; price starts at 1,698 yuan ($237)
• Redmi Note 12 series global variants will lack 210W fast charging, Q1 2023 debut expected
• Nubia Z40S Pro launched as world’s most affordable Snapdragon 8+ Gen 1 phone
• ZTE Blade V40s launched with 6.67-inch AMOLED display, Unisoc T618
• ZTE Axon 40 SE launched with 50MP triple cameras, Unisoc T618 chip

The post Key Specs of Alleged Nubia Z40 10th Anniversary Edition Leak via TENAA appeared first on Gizmochina.

Huawei has already confirmed that the company will be hosting a product launch conference in China on 27th July where the brand will launch its new Huawei MatePad Pro 11-inch tablet along with a few other products.

While some of the details related to the upcoming tablet have already been revealed through the official teasers and leaks, the device has now passed through a certification process in China, revealing its key specifications.

The Huawei MatePad Pro 11-inch has been spotted as it passed through the TAF certification, which reveals that the tablet carrying model number GOT-AL09 will be equipped with an OLED display that has a punch-hole cutout for the front-facing camera. This is an upgrade considering that the previous model featured an LCD panel.

It has also been revealed that the device will feature a triple-camera setup on the back, and the tablet will be running the latest HarmonyOS 3.0 operating system, which is developed in-house by Huawei for its own devices.

As for the connectivity, there’s support for Wi-Fi and 4G LTE, and similar to other Huawei devices, there’s no 5G support because of the sanctions imposed by the United States. It is powered by an 8,200mAh battery, but the charging speed is not yet known.

The teaser image fo the upcoming Huawei MatePad Pro 11-inch shared by the company a few days ago, indicates that the tablet will have a new design featuring a circular camera cutout on the back, similar to the design of the Mate 40 series smartphones.

RELATED: 

• Huawei Enjoy 50 Pro Smartphone To Be Announced in China on July 27th
• Arcfox announces the alphaS, the first EV running on Huawei Inside platform
• Huawei Officially Teases Launch of Huawei WATCH 3 Pro (2022) with ECG on July 27th
• Huawei Watch 3 Pro ECG version to reportedly launch in China on July 27
• Huawei teases FreeBuds Pro 2 in China: World’s first HWA-certified stereo earbuds

The post Huawei MatePad Pro 11-inch key specifications leak ahead of launch appeared first on Gizmochina.

Xiaomi is expected to launch a  new smartwatch soon. An upcoming wearable from the company has received the necessary certifications. Let’s check out the details that are out.

The forthcoming Xiaomi smartwatch will bear model number M2134W1. This wearable has been certified by Chinese regulatory bodies 3C and TENAA.

As of now, only a few of its specs are out. For starters, it will carry support for 5W charging.

Further, the wearable will come with audio playback functionality via built-in storage. The newer Xiaomi watches already offer this feature. Hence, it’s not something new.

Unfortunately, as per Digital Chat Station, it will lack support for eSIM. The tipster also says that the product will be a fitness tracker.

In other words, the upcoming Xiaomi watch with model number M2134W1 will be merely a fitness tracker disguised as a smartwatch. Hence, it will be most likely similar to the Xiaomi Watch S1 and Xiaomi Watch Color 2.

The exact marketing name of this wearable is a mystery. Anyway, we think that it may go official as Xiaomi Watch Color 3. Because the Xiaomi Watch Color 2 is due for a successor as it is almost a year old now.

What are your expectations of the yet-to-release smartwatch from Xiaomi? Do let us know your thoughts in the comment section below.

RELATED:

• Xiaomi phone with Snapdragon 8+ Gen 1 teased to launch next month, could be the Xiaomi 12 Ultra
• 4 Upcoming Xiaomi Flagships Recently Spotted on MIIT China, All Launching Soon In July
• Xiaomi Book S 12.4 with Snapdragon 8cx Gen 2 processor launched
• Xiaomi Band 7 gets new features via firmware update

The post Mysterious Xiaomi Watch gets certified, tipped to lack eSIM support appeared first on Gizmochina.

Coolpad may soon release a new smartphone in China. An upcoming phone with model number CP07 has been certified by 3C and TENAA. The listings paint a clear picture of this yet-to-release device.

According to 3C, the forthcoming Coolpad smartphone will carry support for 18W fast charging. However, it will not ship with a charger.

Further, TENAA says that it will be powered by a 5G-enabled chipset featuring a 2.2GHz octa-core CPU. The SoC will be coupled with 4GB/6GB/8GB RAM and 128GB storage.

The phone will flaunt a 6.58-inch TFT LCD panel with a resolution of 2408 x 1080 pixels (FHD+) and 16.7 million colors. It will measure 163.02 x 74.75 x 8.28mm in dimensions and weigh 180g.

On the rear, it will house a 50MP primary camera. Whereas, on the front, it will sport an 8MP camera. 

Last but not least, the handset will get its energy from a 4,400mAh battery and will be available in three colors, namely black, white, and blue.

As of now, Coolpad hasn’t teased the launch of any new smartphone. Since the device has now received two important certifications, we can expect the company to announce the launch date in the coming days.

RELATED:

• Coolpad Cool 20 with 6.5-inch HD+ display, Helio G80, and 48MP dual cameras launched for 699 Yuan (~$109)
• Coolpad COOL 20 Pro launched with Dimensity 900 SoC, 120Hz display, and more
• Coolpad COOL 20 Pro Starry Sky Limited Edition is finally up for sale in China
• Coolpad gets a patriotic makeover in China as the Coolpad Red

The post Upcoming Coolpad smartphone with FHD+ display, 50MP camera, and more arrives at TENAA appeared first on Gizmochina.

China’s largest carrier China Mobile is known for selling smartphones under a brand called Nzone. These devices are developed by Huawei. Hence, some of these handsets are rebadged or tweaked versions of existing Huawei phones.

The telecom giant is now expected to release a new smartphone as a mysterious model has appeared on TENAA. The listing of the device discloses most of its features.

First and foremost, the upcoming Nzone-branded handset will bear model number SP210. It will be powered by a chipset featuring a 2.2GHz octa-core CPU. The SoC will be paired with 8GB RAM and 128GB/256GB storage.

The phone will house a 50MP triple camera setup on the rear and a 16MP front-facing camera. It is listed to arrive with support for 10x optical zoom. However, we believe that it could be a  typo as Nzone smartphones are usually either budget or mid-range models.

Further, the device will sport a 6.7-inch IPS LCD screen with a resolution of 2388 x 1080 pixels (FHD+) and 16.7 million colors. Unsurprisingly, it will have support for 5G connectivity and will be backed by a 4,900mAh battery.

The handset will measure 163.29 x 74.7 x 8.372mm in dimensions and weigh 195g. It will be available in four colors, such as black, white, green, and blue.

China Mobile is yet to tease the arrival of the aforementioned smartphone. Hence, it is not known when the phone will be officially presented.

RELATED:

• Huawei Mate Xs 2 to Launch Globally on May 18th, Alongside Huawei Watch GT 3 Pro
• Huawei AX3 WiFi 6+ router with speeds up to 3,000Mbps launched in India
• Huawei Tag Smart Tracker spotted on Bluetooth SIG, launch may be near
• Huawei patents unique smartphone with a rollable display

The post China Mobile’s upcoming Nzone phone listed on TENAA with 10x optical zoom support appeared first on Gizmochina.

Just last month, Oppo had launched its K10 series of smartphone, which included a base, a 5G enabled, and Pro variant. Now, it seems that the company plans on releasing another entry in the series, dubbed the Oppo K10x.

The news arrives from a TENAA listing, which confirmed its moniker and also hints that its launch is imminent. Looking at the listing on the Chinese certification website, the handset will carry the model number PGGM10 and arrives with features quite similar to another model from Realme. As of right now, it also appears that the Chinese smartphone maker plans on silently releasing the device rather than announcing it in a press conference.

The listing also revealed its specifications, which includes a 6.59 inch TFT display with a Full HD+ resolution. Under the hood, the handset is powered by a large 4,880mAh battery pack and is equipped with a Qualcomm Snapdragon 695 SoC. This chipset is paired with either 6GB or 8GB of RAM and 128GB or 256GB of internal storage. For photography, the Oppo K10x features a triple camera setup on the rear, with a 64 megapixel primary sensor and two 2 megapixel shooter for depth and macro.

Thus, the smartphone seems quite similar to the Realme V25, in terms of both design and specifications. So, we can expect the handset to arrive in a Silver and Black color option as well. It is unclear if the device supports high refresh rate as well, but if it is a rebranded V25, we can expect to see a 120Hz panel.

RELATED:

• Oppo Reno 8 surfaces on Geekbench with Snapdragon 7 Gen 1 SoC, Hints at an imminent launch
• Get OPPO Reno 7 PRO 5G Phone at a Discounted Price of $549 (Retail Price $699)
• OPPO Reno8 Lite 5G specifications leaked, launch seems imminent

The post Oppo K10x model confirmed, might be a rebadged Realme V25 appeared first on Gizmochina.

Just a couple of days ago, the Oppo K10 Pro was spotted on China’s TENAA database, which revealed a number of its key specifications. Now, the base K10 model of the series has also surfaced on the same website along with its full specs list.

For those unaware, the brand is working on a new K10 series of smartphones for its home market of China. While the Chinese smartphone maker had previously launched a K10 series in the overseas market, this version is different from the model that came with Snapdragon 680 SoC. Unlike the mid range models, the Chinese K10 series is more of a premium grade offering. As per our previous report, the K10 Pro was spotted on TENAA and is expected to launch with a Snapdragon 888 SoC.

Now, the base K10 was also spotted on the Chinese certification website, carrying the model number PGJM10. Looking at this listing, the smartphone is equipped with a MediaTek Dimensity 8000 SoC, which is also in line with our initial reports. This chipset is also a high end chipset and will be paired with 8GB or 12GB of RAM and up to 128GB and 256GB of internal storage. On the front, the device is said to sport a 6.59 inch FHD+ display that offers a high refresh rate.

Live images of the Oppo K10 on TENAA also showcase the device with a punch hole cutout on the top left corner of the screen. This cutout will house a 16 megapixel selfie shooter. Meanwhile, the rear will house a triple camera setup, consisting of a 64 megapixel primary sensor, paired with an 8 megapixel ultra wide angle lens, and a 2 megapixel macro sensor. The device will likely run on Android 12 based ColorOS 12 out of the box and will be powered by a large 5,000mAh battery pack that supports 67W fast charging.

RELATED:

• OnePlus Nord CE 2 5G vs OPPO F21 Pro 5G: Specs Comparison
• Oppo A53 Android 12 update imminent as beta program begins
• OPPO Reno7 Lite launched as rebranded Reno7 Z 5G / F21 Pro 5G

The post Oppo K10 key specs revealed, spotted on TENAA with Dimensity 8000 appeared first on Gizmochina.