Advertisement

Redmi Pad variant bags 3C certification; battery size and charging speeds tipped

In June, a Xiaomi tablet with model number 22081281AC was certified by the 3C authority of China. Earlier this month, the tablet went official in the home market with the Xiaomi Pad 5 Pro 12.4 moniker. A new Xiaomi tablet has appeared in the database of the 3C certification platform. Speculations are rife that it could be the first Redmi branded tablet.

The alleged Redmi Pad with an MT8781 model number has received 3C certification. It is a 4G LTE device that is likely to come equipped with a 22.5W charger. According to tipster WHYLAB, the device will be equipped with a 7,800mAh battery.

Redmi Pad 3C listing
Redmi Pad 3C listing

A recent leak claimed that the Redmi Pad would be equipped with a new MediaTek MT87871 chipset. The SoC is similar to the existing Helio G99 chip. Hence, the first Redmi tablet could be a budget-friendly offering from the brand.

Speculations are rife that the Redmi Pad will be equipped with an 11-inch display that will carry support for 2K resolution. Unfortunately, there is no information available on the other specs of the device. Now that the device has passed 3C certification and has been found being tested in Asian and European countries, it seems that it will not take too long for it to go official.

In related news, Redmi seems to be gearing up to launch a couple of new smartphones in India. It recently unveiled the Redmi Note 11 SE and is now gearing up to launch the Redmi 11 Prime 5G on Sept. 6 in the country. The Xiaomi sub-brand is also expected to launch an entry-level phone called the Redmi A1 in the coming days.

RELATED:

Huawei P50 Pocket sequel’s images appear on TENAA with key specifications

Huawei will be holding its next launch event in China on Sept. 6. The major attraction of the event will be the Mate 50 series of flagship phones. The same event is expected to see the arrival of a couple of other Huawei products. One of them appears to be a new edition of the Huawei P50 Pocket, and the other one seems to be an Enjoy-series phone.

Two new Huawei devices with model numbers BAL-AL80 and CHA-AL80 have appeared with images and key specifications in the database of China’s TENAA certification site. The images show that the BAL-AL80 is a clamshell device, whereas the CHA-AL80 could be an Enjoy-branded mid-range handset.

Huawei P50 Pocket sequel TENAA
Huawei P50 Pocket sequel’s images at TENAA

The BAL-AL80 could be a sequel or an updated version of the Huawei P50 Pocket. The device can be seen sporting a dual-tone design. There are two circles on the backside of the device. The first one looks like it has three cameras, and the second one has a second screen like the P50 Pocket.

Huawei P50 Pocket sequel TENAA
Huawei P50 Pocket sequel’s images at TENAA

The listing does not mention support for 5G networks on the device. It further reveals that the device is equipped with five cameras and a 4,260mAh battery.

Huawei CHA-AL80
Huawei CHA-AL80’s TENAA images

The CHA-AL80 Huawei phone has a punch-hole display on the front, a side-facing fingerprint scanner, and a triple camera unit on the back. It packs a 3,900mAh and lacks support for 5G connectivity. Both devices run on HarmonyOS. Unfortunately, there is no information available on the final monikers of both devices.

The upcoming Mate 50 series is expected to include four models, such as the Snapdragon 778G powered Mate 50e; and the Snapdragon 8 Gen 1 4G powered Mate 50, Mate 50 Pro, and Mate 50 RS Porsche Design.

RELATED:

Upcoming Nokia C31 Emerges on Geekbench with a Unisoc Chip

HMD Global may soon introduce a new Nokia-branded smartphone dubbed as Nokia C31.  Going by its name, the handset will likely be a higher variant of Nokia C21 and Nokia C21 Plus from earlier this year. Let’s take a look at this upcoming phone.

Nokia C21 Plus
Nokia C21 Plus

The yet-to-release Nokia C31 has been spotted on Geekbench. The listing reveals the chipset, RAM, and software of the device.

The smartphone will be powered by a Unisoc SoC. It is expected to house a Unisoc SC9863A chip, which happens to be the same chipset running  Nokia C21 and Nokia C21 Plus.

Either way, the SoC will be paired with 4GB RAM. There could be other memory variants. On the software front, the phone will boot Android 12.

Talking about performance, it is capable of scoring 145 points and 796 points in single-core and multi-core tests respectively. In other words, it can only perform basic tasks.

Unfortunately, nothing else is known about the forthcoming Nokia C31. That’s because this is its first appearance on the internet.

Just like almost all smartphones, we expect to learn more about this one before its official launch in the coming days. Details about it will likely emerge via certifications and leaks.

What are your expectations of Nokia C31? Do let us know in the comment section below.

 

 

RELATED:

 

Samsung Galaxy S21 receives Android 13 based One UI 5.0 Beta update

Earlier this month, Samsung had began rolling out the Android 13 OS based One UI 5.0 Beta update for its current gen flagship series, the Galaxy S22 lineup. Now, the company has also released this update for the previous gen Galaxy S21 series as well.

 

Samsung Galaxy S21 5G series

The South Korean tech giant has announced various features for the new One UI 5.0 Beta update. As of right now, the public beta update for One UI is currently not available across the globe and is only being released in select markets. So, Galaxy S21 owners in India are not eligible for this update, but the beta has began rolling out in South Korea and the UK as well.

The public beta update for the One UI 5.0 is only available for download for those that have already signed up for the beta program. For those interested, you can sign up for this program through the Samsung Members application, which will require you to fill in some details before you get notified for the update eligibility notification. As per official notes, The final update is expected to roll out to all eligible devices sometime in October 2022.

With the new One UI 5.0 beta update, Samsung brings the major Android 13 update  as well as the new color palette of the new OS alongside various other features and UI changes. This includes the likes of stacked widgets, opt-in notifications for individual apps, and more. The updates also offers Optical Character Recognition, aka OCR, to the Gallery app, which basically lets users copy and paste texts directly from the images itself.

RELATED:

 

ColorOS 13 Closed Beta Program Starts for OnePlus 8, 8 Pro, 8T, & Ace

ColorOS 13 is now available for more OnePlus devices in the beta form. The brand has kickstarted the closed beta initiative for four additional handsets, namely OnePlus 8, OnePlus 8 Pro, OnePlus 8T, and Oneplus Ace.

The ColorOS 13 closed beta program for these devices begins soon after the announcement of the software in China. Unsurprisingly, the initiative is limited to China as the global models boot OxygenOS.

OnePlus 8T
OnePlus 8T

The beta registrations of these phones are only live until today (August 31). We believe there could be multiple rounds of recruitment in the coming days.

As per the official update schedule, the OnePlus Ace will enter the open beta phase in September. It will be later followed by OnePlus 8, OnePlus 8 Pro, and OnePlus 8T in October.

Since Oppo is known for delivering stable update a month or two from the release of open beta builds, these handsets will most likely run the stable version of ColorOS 13 before the end of 2022.

We expect the same for the international variants as well. That’s because OnePlus has begun the OxygenOS 13 open beta program for them too. Hopefully, the brand doesn’t mess up this time around.

We regularly cover ColorOS update stories. So stay tuned to remain updated.

 

 

RELATED:

 

AMD launches new 5nm based Ryzen 7000 series desktop processors

AMD has just launched its latest generation of the desktop processors. The new Ryzen 7000 series CPUs were highly anticipated across the globe by professionals, gamers, and even enthusiasts. So let’s have a look at their pricing, specs, and features.

Team Red has just announced four new processors that target different price range and offer varying performance and functionality. This series starts from Ryzen 5 7600X, followed by the Ryzen 7 7700X and the Ryzen 9 7950X, and lastly, the top end Ryzen 9 7950X CPU. Notably, the Ryzen 7000 series desktop processors also comes with support for new socket AM5 platform. This supports dual channel DDR5 memory, up to 24 PCIe 5.0 lanes, and will be supported by the company till 2025 and beyond.

AMD

While the Ryzen 5 7600X is the entry model for now, it is still quite a powerful processor. It is the successor to the popular last gen Ryzen 5 5600X model and also features a 6 core and 12 threads CPU with a base frequency of 4.7GHz and a boost clock speed of 5.4GHz. This model also has a total TDP of 105W and has a total cache of 38MB. The Ryzen 7 7700X is where the higher end model starts, with 8 cores and 16 threads and a base frequency of 4.5GHz and boost clock speed of 5.4GHz. This processor also has a 105W TDP and has 40MB of total cache.

The Ryzen 9 series starts with the Ryzen 9 7900X, which is the top end model for most customers. It offers 12 cores and 24 threads with a base frequency of 4.7GHz and a boost clock speed of 5.6GHz. With these specs, it is clear that apart from great gaming performance, the processor will likely be an attractive option for creative professionals and even productivity based users. This CPU has a 170W TDP and has a 76MB total cache.

AMD

Lastly, there is the true flagship Ryzen 9 7950X processor that offers a whopping 16 cores and 32 threads with a 4.5GHz base frequency and a 5.7GHz boost clock speed. It also has a 170W TDP and will offer 80MB total cache. As per official notes, AMD claims that this processor will offer up to 47% improved energy efficiency over some of its rivals. Additionally, it can also outperform the competition by up to 57 percent in the V-Ray Render.

Another notable announcement alongside the new processor is the AMD EXPO Technology. Through this technology, users can boost gaming performance by up to 11 percent depending on the game you’re playing. EXPO basically provides advanced DDR5 overclocking profile settings. The technology would also boost gaming performance by using pre configured overclocking settings.

AMD

The new AMD Ryzen 7000 series processors is set to go on sale starting from 27th September 2022. Pricing for the new CPUs starts from 299 US Dollars for the Ryzen 5 7600X. The Ryzen 7 7700X has a price tag of 399 US Dollars, while the higher end Ryzen 9 7900X costs 549 US Dollars. The flagship Ryzen 9 7950X processor has a steep price tag of 699 US Dollars.

RELATED:

 

Upcoming iPhone SE to resemble the iPhone XR in design

Well-known YouTuber Jon Prosser appeared on the Geared Up podcast with Andru Edwards and Jon Rettinger (via AppleTrackr) to reveal key details of the upcoming 4th generation iPhone SE. The iPhone SE 2022 was based on the iPhone 8. The new leak reveals that the next-generation iPhone SE will be based on the previously released iPhone XR.

According to Prosser, the iPhone SE 4 will be “just an iPhone XR.” This indicates that it will be equipped with a notched display, reduced bezels, and Face ID. This also suggests that it may not feature a Touch ID sensor.

iPhone XR
iPhone XR

The iPhone SE 2022 is powered by the Apple A15 Bionic chip, which is the same chip that can be found in the iPhone 13 series. Rumors are rife that the iPhone 14 and 14 Max, debuting next month, will have the A15 chip, whereas the iPhone 14 Pro and 14 Pro Max will be equipped with the Apple A16 Bionic.

Hence, it appears that the iPhone SE 4 may feature the Apple A15 Bionic chip. The rest of its specifications could be identical to the iPhone XR, which has been discounted by Apple. Reports have revealed that there has been less demand for the iPhone SE, which suggests that people may not be interested in purchasing an iPhone with an older design.

The iPhone XR, which went official in 2018, came with a 6.1-inch Liquid Retina IPS LCD display that offered 828 x 1792 pixels. The A12 Bionic chip-powered device featured 3 GB of RAM, up to 256 GB of storage, and a 2,942mAh battery with 15W charging support. It came with a 7-megapixel front camera and an OIS-enabled 12-megapixel rear camera.

RELATED:

These OnePlus Phones Will Get ColorOS 13 Update

A couple of weeks back, Oppo unveiled ColorOS 13 for global markets. Yesterday, the company debuted its latest mobile software in China. 

As expected, the firm also revealed the list of devices that will receive an update to this software. Unlike the global eligible list, this one includes OnePlus smartphones.

That’s because OnePlus phones run pure ColorOS in China. Whereas, in international markets, they boot OxygenOS, which is a fork of ColorOS.

With that out of the way, let’s take a look at all the OnePlus smartphones that will get access to the Android 13-based ColorOS 13 update.

OnePlus 10 Pro
OnePlus 10 Pro

OnePlus ColorOS 13 Update List

August 2022

  • OnePlus 10 Pro

September 2022

  • OnePlus 9 Pro
  • OnePlus 9
  • OnePlus Ace

October 2022

  • OnePlus Ace Pro
  • OnePlus 9RT
  • OnePlus 9R
  • OnePlus 8 Pro
  • OnePlus 8
  • OnePlus 8T

The aforementioned schedule denotes the start of the open beta program. The stable release may happen a month or two from the listed month.

It is worth noting that OnePlus has begun the closed beta program for almost all the handsets on the list, except for the OnePlus Ace Pro. Hence, expect the company to deliver the update in a timely manner.

If OnePlus follows the timeline, this will be the first time it will be pushing the latest Android update faster to multiple devices. Merging with Oppo seems to be doing wonders for the brand.

 

 

RELATED:

 

GoPro Hero11 Black design leaked, may launch soon

GoPro is apparently planning on launching a new camera in the market soon. The brand is known for making some of the most popular actions cameras in the market, and now, its upcoming Hero11 model has just been leaked.

GoPro

The news arrives from a WinFuture report, who revealed some key details regarding the upcoming camera and even leaked its design. For those unaware, the American camera maker had announced its Hero10, which is a flagship grade model, that was capable of recording videos in 5.3K resolution at 60 frames per second. This camera also had a 23 megapixel sensor as well. Now, the new report has revealed that the new Hero11 will practically be identical to the Hero10 in terms of design.

The leak showcases the camera’s design, which includes two displays, with one at the back and the other next to the camera sensor at the front. In other words, the Hero11 Black practically the same as the Hero10 Black. This means that the external design is the same with the dual displays and identical button placements. Talking about the Hero series overall, its the flagship action camera from the brand that is quite popular in the market.

GoPro

The design of the Hero11 is similar to the Hero10, but was originally found in the Hero9. Although, the Hero10 featured a new GP2 chip that helped raised the video recording at double the frame rate. So, we can likely expect the Hero11 to also come with some improvements in sensor or updates to the feature list. The new GoPro camera may even support 6K resolution and also offer better HDR recording as well.

RELATED:

 

Nothing Ear (1) Stick certified by BIS, SIRIM & SGS Fimko, launch expected soon

The London-based startup Nothing launched its first product back in 2021, the Nothing Ear (1) TWS earphones. Since then, the brand has grown and even launched its first smartphone in the market.

Nothing Ear (1) Stick Leak
Nothing Ear (1) Stick leaked image

The brand appears to be planning on launching a new pair of TWS earbuds in the market called the Nothing Ear (1) Stick. An image of the upcoming earbuds has already surfaced revealing a similar back design as the current Nothing Ear (1) earbuds. Now, the device has started getting certified by various organizations hinting at an imminent launch.

Nothing Ear (1) Stick
Nothing Ear (1) Stick SGS Fimko

Tipster Mukul Sharma has spotted the Nothing Ear (1) Stick on India’s BIS, Malaysia’s SIRIM, and SGS Fimko certification databases. The certifications reveal that the device comes with model number B157. Other than that, the certifications don’t reveal any details about the specifications. So let’s take a look at what we know so far.

Nothing Ear (1) Stick specs & features (expected)

According to leaks, the Ear (1) Stick will not feature replaceable rubber tips and would likely feature a semi-in ear style design. If this is true, then the earbuds will likely skip the ANC (Active Noise Cancellation) feature and might even be cheaper than the original Ear (1).

The Ear (1) Stick case will likely be rectangular and the earbuds will have IP54 water resistance. Other features may include Bluetooth 5.2 connectivity, up to 7 hours of battery life from the earbuds and an additional 30 hours from the charging case, AI noise isolation mode, and low latency mode. An earlier Amazon listing leak also revealed that the earbuds will have a price tag of around 99 EUR.

 

RELATED:

 

Motorola E22 launch may be imminent, spotted receiving multiple certifications

Motorola is apparently planning on launching a new smartphone soon. This model appears to be the Moto E22, which was recently spotted on multiple certification websites like NBTC, EEC, and even WiFi Alliance.

Motorola

The upcoming smartphone model was spotted on these certification websites, which revealed its model number XT2239-8. Considering its a Moto E series device, it is also likely to be a budget friendly smartphone. Furthermore, the online certification listings on multiple platforms also hint that its launch might be just around the corner, although there has been no official word shared by the company itself as of right now.

Looking at some of these certifications, the NBTC listings reveals that the Moto E22 will support GSM, WCDMA, and LTE network connections. On the other hand, the Russian EEC listing does not reveal any important information regarding this new smartphone. Meanwhile, the WiFi Alliance listing only confirms that the handset will support dual band WiFi connection and will run on Android 12 OS out of the box as well.

Motorola
Moto E22s

Unfortunately, this was all the information revealed through these certification databases. So we will have to wait for more information or leaks to surface to know more. At the moment, Motorola did launch the Moto E22s model recently in Europe, which launched with a 6.5 inch HD+ 90Hz display and a 16 megapixel dual camera setup on the rear. The Moto E22s is powered by an Helio G37 SoC and a large 5,000mAh battery pack.

RELATED:

 

Realme Buds Air 3S leaked images reveal a sporty look

Earlier this year, Realme debuted the first earbuds in the Realme Buds Air 3 series with the launch of the Buds Air 3. The brand later launched the Buds Air 3 Neo in China and India. Now, the company is gearing up to launch the Buds Air 3S soon.

Ahead of the launch, tipster Mukul Sharma has revealed images of the upcoming earbuds.

The images reveal that the Buds Air 3S will come with a distinct design from the other two earphones in the series. It will have a flat stem, and silicone ear-wing tips. The design indicates that the earbuds will likely be catered toward athletes and fitness enthusiasts, hence, the design choices are likely to provide a secure in-ear fit. Other than that, the charging case will have a transparent lid.

The earbuds have already appeared on BIS and TDRA certifications all but confirming their future availability in India and Indonesia. Specs and features are still under wraps, but we can look at the Buds Air 3 to get an idea of what to expect.

Realme Buds Air 3 specs & features

The Buds Air 3 comes with 10mm drivers featuring a liquid crystal polymer diaphragm to deliver clear vocals and powerful bass. It supports Dolby Audio and customizable audio tuning.

The earbuds have up to 42dB of active noise cancellation. In terms of battery life, the earbuds may last up to 5.5 hours on a single charge. The charging case can extend the battery life by up to 30 hours. With the ANC feature enabled, the total battery life will be approximately 22 hours.

Other features include transparency mode, dual device connection, 88ms low latency mode for gaming, touch controls for answering calls, managing media, and using voice assistants on smartphones. The earbuds also offer an IPX5 level of water resistance.

 

RELATED:

 

Oppo Find N 2 won’t have any creasing & external display issues: Pete Lau

The founder of OnePlus and the Chief Product Officer of Oppo, Pete Lau, has just shared some interesting information regarding the next gen foldable smartphone from Oppo, which is likely going to be the Find N 2.

Oppo

The senior executive revealed on his Weibo account (a Chinese microblogging website) that the next generation flagship foldable Oppo smartphone will not have issues regarding the display creasing. For those unaware, flexible screen panels have typically faced issues of the display creasing overtime, with brands working on eliminating the issue entirely. Similarly, Lau also claimed that the next gen foldable handset will not face any issues with its external display as well. This is likely related to the odd resolution or size and functionality.

Furthermore, the official also added that the Chinese smartphone maker also plans to make its products more sustainable and believes that there is a lot of room for improvement in this regard. Apart from this, Peta Lau also talks about molding hardware selection, technical planning, and product discussions based around user experience. He also pointed out that it is also important to focus on other issues like display power consumption, display quality, display consistency, and changes in the App ecosystem.

OPPO Find N
Find N

Keep in mind that it is still unclear if Pete Lau is talking about the Find N 2 in particular. All we know for sure is that these ideas will be regarding next generation foldable smartphones. Although, there have been certain reports over the last couple of months regarding the Find N 2. So, it likely refers to this model.

RELATED:

 

Redmi Note 11 SE goes on first sale today in India – Price, offers, specs

Last week, Redmi launched the Note 11 SE smartphone in India. The device is set to go on sale today starting at 12 noon via the e-commerce platform Flipkart. So, let’s check out the pricing, offers, and other details.

redmi_note_11se

Redmi Note 11 SE pricing & launch offers

The Redmi Note 11 SE has a price tag of Rs 13,999 for the 6GB + 64GB configuration. It can be purchased off of Flipkart starting at 12 noon today. It is available in four color options – Thunder Purple, Cosmic White, Space Black, and Bifrost Blue.

Coming to launch offers, the brand will provide an instant discount of Rs 500 on all prepaid transactions. ICICI Bank users can also avail Rs 1,250 discount using their debit or credit card for the purchase.

Redmi Note 11 SE specs & features

The Note 11 SE features a 6.43-inch AMOLED display offering  Full HD+ resolution, 60Hz refresh rate, and 1100 nits of peak brightness.

Redmi Note 11 SE

The device has a MediaTek Helio G95 chipset under the hood paired with 6GB of LPDDR4X RAM and UFS 2.2 storage. A 64-megapixel primary sensor, an 8-megapixel ultra-wide angle lens, a 2-megapixel macro camera, and a second 2-megapixel depth camera make up the smartphone’s quad camera arrangement on the back. A 13-megapixel selfie camera is located on the front.

The device operates on MIUI 12.5 based on Android 11 and comes with a 5,000mAh battery with support for 22W fast charging. Other features include, a side-mounted fingerprint scanner, IR blaster, 3.5mm headphone jack, and an AI face unlock feature.

 

RELATED:

 

Moto E22s launched with Helio G37, 16MP dual cameras

Motorola has quietly unveiled the Moto E22s in Europe. The handset appears to be a toned-down version of the Moto G22, which was announced in March this year. Here is all the information on the specifications, features, and price of the device.

Moto E22s specifications and features

The Moto E22s has a 6.5-inch IPS LCD screen. The punch-hole display offers an HD+ resolution of 720 x 1600 pixels and a 90Hz refresh rate. The device comes preloaded with the Android 12 OS.

Moto E22s
Moto E22s

The MediaTek Helio G37 chipset is present under the hood of the Moto E22s. The handset offers 4 GB of RAM, 64 GB of native storage, and a microSD card slot. It is equipped with security features such as a side-facing fingerprint scanner and face unlock.

The E22s has a front-facing camera of 8-megapixel. On the back of the phone, there is a dual-camera setup with a 16-megapixel main camera and a 2-megapixel depth-sensing unit.

The handset is equipped with a 5,000mAh battery, which seemingly supports 10W charging. It measures 163.95 x 74.94 x 8.49mm and weighs around 185 grams.

Moto E22s price and availability

The Moto E22s is priced at 159 euros. It comes in two colors:  Eco Black and Arctic Blue. It is unclear which other markets will be receiving the E22s.

RELATED:

OPPO announces Pantanal cross-platform system, Sense health algorithm, OPPO Carlink, and more

OPPO has kicked off its annual OPPO Developer Conference today, and the company has announced several new technologies. Along with new technologies, the Chinese company has also announced its plan to support developers and creators.

The new technologies announced by the company at ODC 2022 include Pantanal Cross-Platform Smart System for multi-device connections, OPPO Carlink for connected cars, and OPPO Sense health algorithm.

Pantanal Cross-Platform Smart System

OPPO Pantanal

The company has introduced Pantanal, which is claimed to be the first cross-platform system designed for different devices and systems to connect and collaborate. OPPO says that with cross-device sensing and computing capabilities, Pantanal can better understand and anticipate users’ needs and provide services at the right time in the right way.

It is a cross-platform system, making it easier for developers to develop and deploy services across multiple platforms, which increases efficiency as well as lowers cost.

OPPO Carlink

The OPPO Carlink has been developed by the company as more and more people are relying on their smartphones for in-car service and entertainment. It aims to enhance collaboration and integration between smartphones and automobiles.

Using this technology, users can access a smartphone’s computing power and application ecosystem without changing existing in-vehicle infotainment systems, while smartphones can provide services through the car via software pushes.

OPPO Sense

OPPO Sense

Similar to other companies, OPPO is also working on health and fitness-related technology, and in a step forward in preventive healthcare, the company has today officially announced OPPO Sense, a self-developed health algorithm.

It features breakthroughs in cardiovascular health, fitness, and sleep tracking. OPPO says that it will collaborate with global partners to improve connectivity between IoT products and develop health management apps, hardware, and services designed to help detect the onset of certain chronic diseases.

OPPO Gravity Plan

The company has announced that it will allocate resources worth RMB 2 billion towards the Gravity Plan in 2023 to support developers in building an ecosystem. The Gravity Plan provides partners with resource support such as development, traffic acquisition, marketing, and promotion.

OPPO says that more than 300,000 developers and 700,000 creators have joined hands with the company to distribute their products and services across multiple platforms. The OPPO Open Platform supports developers in areas such as app services, graphics processing, and interconnectivity.

RELATED: 

Xiaomi 13 Pro flagship smartphone’s screen details leak online

A few months ago, Xiaomi launched its flagship smartphone in the form of the Xiaomi 12 Pro. Now, the company has already started working on its successor, dubbed Xiaomi 13 Pro, which will be launched next year.

While the official announcement related to the upcoming Xiaomi 13 Pro is still months away, some details about the smartphone have now started surfacing online.

Xiaomi 12S Pro Flagship Smartphone
Xiaomi 12S Pro

In the latest development, the screen details of the Mi 13 Pro have been leaked on Weibo by well-known tipster Digital Chat Station.

As per the leak, the Xiaomi 13 Pro smartphone will come with a 6.7-inch Samsung E6 substrate flexible screen with a 2K screen resolution and a 120Hz refresh rate.

Previously, it was revealed that the standard model of the Xiaomi 13 smartphone would come with a 6.36-inch 2.5D flexible screen with narrow bezels and a 120Hz refresh rate, while the Pro model will include a four-way infinite micro-curved display.

The phone is also expected to have a single punch-hole cutout at the top-center of the display for housing the front-facing camera. The engineering machine with a ceramic body has already been in testing, which is manufactured by BYD.

The device is expected to be equipped with the company’s own self-developed fast charging IC and could feature support for 50W wireless charging. The phone will be powered by the next-generation Snapdragon 8 Gen 2 processor, which is expected to release in November.

RELATED: 

How To Watch Sony Xperia 5 IV Launch Event Live

Sony is all set to launch the Xperia 5 IV flagship smartphone at a launch event tomorrow, where the company is expected to officially unveil the compact flagship.

The launch event for the Xperia 5 IV will take place on 1st September at 03:00 AM Eastern Time or 12:30 PM IST. The event will also be live streamed by the company on its official YouTube channel.

Sony

You can watch the Sony Xperia 5 IV launch event live by clicking here or through the following embedded video.

Based on the leaks, the phone is expected to be a compact device as it has been teased by the company with the tagline “Be Creative. Go Compact.” In terms of design, it is likely to be similar to the Xperia 1 IV.

As for the specifications, the smartphone could feature a 6-inch display, offering an OLED panel and a 120Hz refresh rate. Under the hood, the device will be powered by the Qualcomm Snapdragon 8 Plus Gen 1 processor. There’s also a possibility that instead, the phone may pack Snapdragon 8 Gen 1 SoC.

The device is expected to have up to 12GB of RAM and up to 512GB of internal storage. In the camera department, there will be a triple-camera setup on the back, but details about the sensors remain unknown.

The phone will come with a dual stereo speaker, IP68 ratings for water and dust resistance, wireless charging support, and more. To know for sure what the device packs, we will have to wait for a few more hours for the official launch event.

RELATED: 

iQOO Z6 Lite 5G could feature Snapdragon 480+ chipset: Report

iQOO is gearing up to launch a new affordable 5G smartphone in India. The device dubbed the iQOO Z6 Lite 5G has already made an appearance on the BIS certification database with model number I2208.

Now, a new report has emerged revealing some key specifications of this upcoming device. According to the report, the smartphone will debut in India in the month of September. It will come with a Qualcomm Snapdragon 4-series chipset under the hood. This could be the Snapdragon 480+ 5G chipset which is usually seen in entry-level 5G smartphones.

iQOO Z6 Pro 5G
iQOO Z6 Pro 5G

Earlier reports have stated that the iQOO Z6 Lite 5G will be a tweaked version of the Vivo T1x. If this turns out to be true, then the iQOO Z6 Lite 5G will most likely offer an IPS LCD display with a Full HD+ resolution of 1080 x 2408 pixels and a refresh rate of 90Hz.

Vivo-T1X
Vivo T1x

The device could come with 4 GB / 6 GB of RAM and 64 GB / 128 GB of internal storage. As for optics, we can expect a 50-megapixel primary camera with an f/1.8 aperture, a 2-megapixel macro camera, and a 2-megapixel depth sensor. On the front, it could feature an 8-megapixel selfie snapper.

Other specs will likely include a side-mounted fingerprint scanner, Android 12-based FunTouchOS 12, and a 5,000mAh battery with 18W fast charging.

 

RELATED:

 

POCO M5 page goes live on Flipkart, reveals design

The POCO M5 and POCO M5s are scheduled to go official at 20:00 PM (GMT+8) in the global market. Reports have claimed that only the M5 will be released in India, and not the M5s. The landing page of the POCO M5 is now available on the Indian retailer site, Flipkart. The listing confirms that the device will be announced in India at the same time globally. The Indian launch event takes place at 5:30 PM (local time) on Sept. 5. In addition, the microsite has revealed the key specifications and design of the M5.

The POCO M5 can be seen sporting a teardrop notch display on the front. Its back panel has a leather-like texture. The camera block houses a dual-camera setup, an LED flash, and a POCO branding. As can be seen in the tweet by POCO India head Himanshu Tandon, the POCO M5 will be available in at least yellow and blue colors.

As far as specifications are concerned, POCO has only confirmed that the POCO M5 will be equipped with the Helio G99, which is a new 6nm MediaTek chip. It is speculated that the POCO M5 will come in three options: 4 GB RAM + 64 GB storage, 4 GB RAM + 128 GB storage, and 6 GB RAM + 128 GB storage.

The global and Indian POCO M5 variants are likely to pack the same specs. However, the global model may carry support for NFC, while the Indian model will lack support for it.

Rumors are rife that the POCO M5 will feature a 6.58-inch LCD panel that offers a Full HD+ resolution. It may house a 5,000mAh battery with 33W fast charging support. For security, it seems to be equipped with a side-facing fingerprint scanner.

RELATED: