The Chinese manufacturer of smart watches Zeblaze launch a new device that will receive the name of ZeblazeCosmo and has now shown us a picture of it.
Zeblaze had already made a couple of smartwatches this year, the first was the Zeblaze Rover and then launched the Zeblaze Crystal . The second SmartWatch is much better than the first and having already produced two of them and see the response and feedback from the public assume they will pretty clear what to do with the third one to be an even better device than previously we had seen.
We were definitely impressed by an affordable yet premium handset and this time around we are looking at a little brother – ZTE Axon Mini. It turns out that it is not only another mini version of a flagship but it is one of the world’s first Android smartphones (along with the Huawei Mate S Luxury Edition) that has a force touch display technology. Find out more in our unboxing and first impressions article.
The ZTE Axon Mini comes in a premium looking packaging where all the items are packed neatly. The contents include the charging plug, USB cable, a pair of earphones, which actually sound pretty good; SIM ejector PIN, some documentation and a soft plastic case.
ZTE Axon Mini: DESIGN
As far as the design, we are looking a really premium and well-made design. It is made almost entirely of metal except for those top and bottom parts on the back, which imitate a leather finish with some fake stitching. It is very subjective and many people may not like it but I have to say that they are okay to me. As a matter of fact, they have a somewhat rubberised finish, which definitely helps with the grip.
The front top and bottom parts may give you an impression that the Axon Mini sports a dual stereo speakers setup. However, the top part is dedicated only for the earpiece, usual set of sensors, LED light and 8MP selfie snapper.
The bottom is the place where you can find a front firing speaker along with the main mic.
The ZTE Axon Mini keeps the same design language as its bigger brother but this time around it ditches the dual-camera setup and opts in for a more conventional 13MP shooter with dual-LED flash.
Underneath the camera there is a fingerprint scanner. I’ve setup it up since the first minute I had the phone and I have to say that it is super easy to setup and very fast, and accurate to use. Also, the placement of the scanner feels much more natural than on the front. However, it may be just my habit I acquired after having reviewed tons of phones.
ZTE Axon Mini in pictures:
1 of 17
ZTE Axon Mini: FIRST IMPRESSIONS
Honestly, I was pretty excited to test the ZTE Axon Mini but I have no reasons why. It may be due to the fact that I really liked the regular Axon phone.
Well, the reasons I like this phone start with a great presentation, which makes you believe that you have an expensive phone.
Of course, none of the presentations/packagings has ever made a phone great but as soon as you pick the ZTE Axon Mini up, you feel a well constructed device, which is compact due to its 5.2″ display, and it definitely feels great in the hand.
Also, I’ve played with the UI, camera (at the first glance the pictures seem to be pretty good), did some other stuff and everything seems to be running smoothly.
The force touch? Yes, it is working on the phone and it seems like a pretty neat feature. However, I need to spend a little more time with the device to tell my opinion.
All in all, the ZTE Axon Mini seems like a really decent offering for the price of just over $300. Stay tuned to our full review.
Vinyl records may not be your first choice when it comes to listening to music but there are still a lot of music lovers out there who do that. However, neither the records itself not the players are cheap but there are some affordable solutions. We have previously reviewed the one made by 1byone and you may check out the video review below.
Keep reading as you will find all the info how to get $20 Off with a coupon code!
The Best Affordable Vinyl Record Player? 1byone Vintage Turntable Review
The device comes in a huge box and the contents include the turntable itself, AC adapter and instruction manuals.
1byone Vintage Turntable Review: DESIGN and FEATURES
The 1byone turntable comes in a luggage style case and the exterior is made of PU leather but there are other colour options or even a denim finish. I will leave Amazon links in the description below this video for that.
The first thing you’re going to see is that the device is very well made and doesn’t look cheap at all. Also, all the corners of the luggage are protected with metal plates, which also add a little bit of style.
On the bottom side there are rubber feet to prevent the turntable from sliding and on the front side you can find a metal buckle, a handle and two speakers.
The right side is where you can find all the controls like power on/off switch, which doubles as a volume knob, a headset jack if you prefer listening to vinyl music via headphones and a power input. Also, you have an option to connect the turntable to external speakers and you can even connect your phone or any mp3 player and use it as a source of the sound input.
1byone Vintage Turntable Review: MUSIC PLAYBACK
Allright, so if you want to start listening to your vinyls, it is very simple even for the first time user. All you have to do is to plug the power cord and turn on the device.
Then you have to open up the luggage with a buckle, which looks very sturdy and will not break anytime soon.
1 of 3
What you want to do here is put a record on the turntable platter and select the desired speed, which includes 33, 45 or 78 RPM according to your record. Usually, the speed is written on the vinyl itself. Keep in mind that if you want to use the 45 RPM record, you have to use the included adapter.
In order to start playing music you have to open up the tone arm clip to release the tone arm. Then you have to push the lift lever backwards to raise the tone arm and gently move the tone arm to the desired position of the vinyl.
Keep in mind that the turntable will start spinning when the tone arm is moved towards the vinyl.
Finally, you have to push the lift lever forward and the tone arm will start moving towards the vinyl record nice and gently.
1byone Vintage Turntable Review: SOUND QUALITY
To be honest, I don’t usually listen to vinyl records, so I have borrowed some very old ones from the 70s that my friend had in his basement.
The sound quality is like listening to vinyl records. The sound is very live and you can hear a lot of rich tones.
As far as the volume output, it could be a bit louder but it is loud enough to fill a large room even if you are playing very old records.
1byone Vinyl Record Player Review: CONCLUSIONS
So there you have it, the 1byone vintage turntable. For just over $70 you are getting an affordable solution to play your old or maybe new vinyl records as they are still being widely used in the music industry.
The 1byone vinyl record player is stylish and has a great build quality. Also, there quite a few options like the ability to play music via headphones, connect the turntable to the external speakers or even connect your phone or any mp3 player.
Also, this turntable is super easy to use and it has an auto power off switch, which stops the music playback automatically as soon as the vinyl record finishes.
A few shortcomings would be that the inside of the turntable feels a bit plasticky as the platter and tone arm parts are wobbling a little. Also, the speakers could be a little bit louder.
Despite a few disadvantages, the 1byone vinyl record player is a great offering if you are looking for affordable solution to play your old or new vinyls and $70 would probably not break your bank.
If you think that 1byone vinyl records player is something you have to own or it would be a great present, you can grab a generous $20 OFF with the Amazon coupon code: T4FZXUOH.
Deal summary:
Start Date: 12/04/2015 00:01 AM End Date:12/11/2015 23:59 PM Free shipping with Prime or $35 order
Many expected Xiaomi to unveil its latest flagship smartphone, the Xiaomi Mi 5 at the Grand Finale event on November 24. However, at the event we met only two devices, the Redmi Note 3 and the Xiaomi Mi Pad 2. So, it meant we had to wait for a couple of months more to meet the flagship Mi 5.
However, at the interview after the event, Xiaomi CEO Lei Jun revealed that he was currently using the device and he found its to be great. So, it looks like the Mi5’s design has been finalized.
Now, we have our first glimpse at the Xiaomi Mi 5 flagship and from the image, the phone looks really beautiful. The image shows that the phone will come with a bezel less design, which means no black borders on the side. Nubia has shown us that its possible with its Z9 flagship back in May this year, so it won’t be surprising to see the Mi 5 come with such an amazing design.
On a closer look, the phone does look like the Mi Note. But the bezels on the Mi Note flagship are not as thin as this. So, we will have to wait and see whether this is the real design of the upcoming flagship.
The image comes directly from Xiaomi’s official account. It was posted a few days back, but till now went unnoticed. Our best guess would be the Xiaomi Mi 5!
Further, the phone is said to come with ClearForce Touch technology from Synaptics which is similar to Apple’s 3D Touch. So, the display will be able to measure the force with which a user presses the screen. This would come in handy in things like gaming where the phone will be able to distinguish between a hard press or a soft press on the throttle.
As for the specs, the Xiaomi Mi 5 is expected to come with a 5.2-inch 2K resolution display with 4GB RAM, 64GB storage and Snapdragon 820 chip under the hood. At the back, you can expect a 21MP camera and up front, an 8MP shooter.
According to earlier reports, we can expect the release of the phone to be around January-February period next year. So, expect a lot more details about the device in the coming weeks.
Remember a few days back, we got a report that Mediatek was working on a slightly upgraded variant of the existing MT6795 chip called as the Helio X12. Well, according to insiders who told the Chinese media website IT68, this chip may not actually exist. So, the rumors about the MT6795X aka Helio X12 could have been fake.
The same report had said that the X12 chip will be used in the Redmi 3 handset which is expected to be unveiled early 2016. However, it was surprising even at that time, given that Redmi 3 lies below the Note series and, it would really be crazy for Xiaomi to incorporate such a mid-range chip on an entry level device which may cost just about 599 Yuan ($94).
While the Helio X12 chip may not be real, we are quite positive that Xiaomi will launch the Redmi 3 early 2016. So, it would be interesting to see which processor Xiaomi plans to use inside this device.
What do you think? Will we see a Helio X10 powered Redmi 3 handset next year? Or maybe it will be powered by the Helio P10 chip, which will make more sense.
Ulefone starts today to list the golden version of Ulefone Paris on retailer sites for presales at the price of USD169.99, the same with the original price of the white and grey versions.
Xiaomi has expanded into many different segments in the past few years, including wearables. Although the company is yet to release a low-cost smartwatch, its Mi Band, which costs under $20 has turned out to be quite successful. As a result, the company has managed to make it to the top three wearable companies by shipments as well as market share for the Q3 2015.
16GB (expandable via microSD card slot up to 64GB)
Cubot X17 Review: UNBOXING
The phone comes with a charging brick and USB cable, SIM ejector pin, instruction manuals, screen protector and a a nice soft plastic case, which is always a nice addition to have.
Cubot X17 Review: DESIGN
As far as design, we are looking at a very thin device as its thickness measures at just 6.1mm. The Cubot X17 has a nice metal frame and it is a compact phone due to its 5” display.
Besides the usual stuff you would expect, on the front there is LED light, 8MP shooter for selfies and 3 capacitive buttons, which are, however, not backlit.
The back is made of metal expect for the top and bottom parts, which sport plastic material. As far as optics, we have a 13MP snapper, which is interpolated to 16MP and it is supplemented with a dual LED flash.
On the bottom, there is a speaker grill.
On the right, there is a conveniently placed and tactile volume rocker and a power key, on the left there is a SIM card tray, which can take either 2 SIM cards or a combo of 1 SIM card and the microSD card.
On the top we have a headset jack and on the bottom there is a micro USB port.
Overall, the phone feels solid, it is well build and it uses some quality materials in its construction.
Cubot X17 design gallery:
1 of 24
Cubot X17 Review: DISPLAY
When it comes to the display, a 5” 1080p panel is not bad at all as it bright enough, colours look natural and it has good viewing angles as it is an LCD panel after all.
Cubot X17 Review: UI
Cubot X17 comes with almost stock looking Android 5.1 out of the box. We don’t have any bloatware and the UI is running smoothly.
Some of the notable features would be gesture controls we’ve seen on a lot of phones. All of them working okay but could be a bit faster and more responsive at times.
Also, if you don’t like the pre-installed gestures, you can assign them to the tasks you want.
Overall, the UI performance is snappy and I didn’t have any hiccups during my review period.
Cubot X17 Review: BENCHMARKS
1 of 10
Cubot X17 Review: HARDWARE and PERFORMANCE
Cubot X17 has an MTK6735 chip with the clock speeds of 1.3GHz, generous 3GB of RAM and 16GB of expandable storage.
The result of it is… meh.. 3D games do not work well as there is a lot of stutter and lag, and I simply cannot recommend this device for serious gamers out there.
Cubot X17 Review: MULTIMEDIA
When it comes to the multimedia, I wasn’t really impressed by the loudspeaker. Well, usually you do not get anything spectacular from a budget phone like this and Cubot X17 is no exception. The sound is tinny and it lacks depth. As far as sound via earphones, it’s okay and it is on par with many other budget phones.
Cubot X17 Review: CAMERA and IMAGE QUALITY
Cubot X17 has a 13MP camera sensor that is interpolated to 16MP.
The images that are produced by the camera are just mediocre and the results are inconsistent. Sometimes you can take some great looking images but more often than not, the pictures have softer focus on the corners or even on a huge part of the image. Also, there is a significant amount of noise even in the daylight shots. While the level of details is good, the colour reproduction is a hit or miss.
Cubot X17 Review: VIDEO QUALITY
When it comes to video recording, the footage is just average. See a video review or download a video sample from the link below.
As far as connectivity, I have no complaints. Call quality is okay, Wifi and Bluetooth connectivity are stable and GPS is accurate.
Cubot X17 Review: BATTERY LIFE
1 of 2
As far as battery life, 2500mAh unit is not really impressive but it’s not terrible either given the 5” 1080p display. I could get just over 3 hours of screen-on time on average use. You may get around 4 hours if you reduce the brightness significantly.
Cubot X17 Review: CONCLUSIONS
If you are looking for a phone that it is very slim, has a decent design and good build quality, Cubot X17 is a decent choice. Also, this phone is compact and the 5” display is pretty good, and the UI performance is great.
However, you have to keep in mind that the loudspeaker is not really impressive, image as well as video quality could see a some improvements, and the battery life is not that great due to a slim profile of the device.
All in all, Cubot X17 is a beautifully crafted and super slim phone with good day to day performance but you have to consider some shortcomings as on any other phone.
Today sees the first teaser for the upcoming Android Wear device from Elephone, in this quick youtube video showing the ELE Watch.
The video is short and sweet but does show off some of the basic functionality of the watch.
The ELE Watch features a 1.5″ 320 x 320 screen, is waterproof and has a heart rate sensor built in as well as wifi.
Hopefully the fact that Elephone have released this video means the watch release is not too far off, hopefully China based companies such as Elephone can bring the price of Android Wear based watches, in to a more affordable price bracket in the same way that they have for mobile phones.
So far its looking fairly good and hopefully will deliver a fully functional Android Wear device at a decent price in time for this Christmas.
As always please feel free to leave comments and questions below
Metal seems to be the new standard among mid-range smartphones. Even Huawei has joined the party with the brand new Huawei Enjoy 5S handset. The phone is priced at 1099 ($172) and is targeted at those users who would like a compact device with a 5-inch display. Other metal phones in this range are usually of 5.5-inches, so this phone will cater to the needs of a slightly different population.
The Huawei Enjoy 5S comes with a 1.5GHz Mediatek MT6753T processor with 2GB of RAM on board and 16GB of internal storage. At the back, there will be a 13MP camera and up front, you will find a 5MP shooter. The 5-inch display will come with 720p resolution, which is a bit disappointing considering competitors have already upgraded to FHD resolution. The battery is also not very impressive, 2200mAh but its mainly because the company decided to keep the phone super thin, measuring just 6.3mm.
This isn’t the best specs we have seen on a $172 phone, but for a 5-incher, it’s not bad either. You can check out a few hands on pictures of the Huawei Enjoy 5S from down below.
It would seem that a lot of China based phone companies are looking to get on to the Marshmallow band waggon at the moment, Oukitel not wanting to be left behind have been working on the Oukitel K4000 Pro with Android Marshmallow.
From the information received today it would appear that this is not the K4000 Pro’s official Rom, but is however the work of some of their technical guys.
It would appear that their curiosity got the better of them and they decided to see if they could endow the Oukitel K4000 Pro with Android Marshmallow via a port of the highly regarded CyanogenMod 13 ROM.
I would love to see it in action and get a list of whats working and more importantly whats not working, but for now will have to make do with the knowledge that Oukitel are at least trying.
Not much more is known about the K4000 Pro, we do know that like its non Pro little brother it will come with a 5000mAh battery, and that the battery works with Flash Charge Technology (5v/1.5a) to give fast charge times.
The K4000 Pro will also feature a 2.5D curved Arc design screen that is 1.1mm thick (as opposed to 0.7mm which is standard for most phones), this should help to make the screen a lot more resistant to drop based cracking.
Whilst not shown in the picture, It has also been confirmed that the rear cover will feature a crocodile skin textured plastic design.
The K4000 Pro comes with support for the following networks
4G LTE FDD Five-Band: 800/ 900/ 1800/ 2100/ 2600
I will keep you informed as and when we get more news and information on the K4000 Pro
For now please feel free to leave any questions or comments below.
A few months back, Xiaomi and Microsoft entered into a partnership which allowed the company’s Windows 10 OS to be installed on Xiaomi’s Mi4 flagship. We have already seen a couple of Mi4 devices running on an early version of the OS, but today, Microsoft released an official Windows 10 Mobile ROM version for all Xiaomi Mi4 users. This means that you can experience the power of Windows right on your Xiaomi smartphone. The ROM will be publicly made available for all Mi4 users to try out.
Along with the new ROM, Xiaomi also announced today that it will make the Windows 10 ROM available for its Xiaomi Mi Note series. So, in the coming weeks, there will be at least three different models running on Microsoft’s Windows 10 OS — the Mi4, Mi Note and the Mi Pad 2.
While we have not yet tried out the newly released version, here are some pictures of the Xiaomi Mi4 running on the Windows 10 Mobile operating system directly from Xiaomi. So far everything looks good, but we will have to wait for some more feedback to see whether there are any major flaws or bugs in the OS.
Check out the pictures from down below. Meanwhile let us know whether the idea of Windows 10 Mobile on your Xiaomi Mi4 sounds interesting to you.
LeTV has quickly established its presence in the market with its Le series of smartphones. The devices in the range feature amazing specs inside a beautiful metal body which has made them popular in the home country of China. It’s been more than six months since the launch of the series and naturally, details about its next generation version have already started to come out.
Earlier today, we came across an AnTuTu listing of an upcoming LeTV model, the LeTV Max Pro X910. According to the benchmark listing, the device will come with the latest Snapdragon 820 quad-core chipset, which is the same chip that’s expected to power the Xiaomi Mi 5 flagship.
LeTV Max is the company’s top-end lineup and hence, we can expect very high-end specs on the device. The listing reveals that the LeTV Max Pro comes with a 5.5-inch display with 2K resolution. There will be a 21MP rear camera along with a 4MP (mostly Ultra-pixel) front-facing one. As for memory, the phone comes with 4GB of RAM on board along with 64GB of internal storage. It will be running on the latest Android 6.0 Marshmallow OS.
As you can see, the specs are pretty high-end. Unfortunately, other than this leaked benchmark listing, we have no idea about how the phone looks or when it is going to be launched. However, since the phone is already on AnTuTu it could mean that the launch is nearby. Stay tuned for more details on the LeTV Max Pro in the coming days.
The guys and girls over on the Elephone forums have been busy bunnies and today we have news of Updates & Custom Roms for Elephone Trunk & P8000
The first Rom and the Rom that will certainly be getting a lot of attention from custom Rom installers like myself is the Elephone Trunk port of Cyanogenmod 13 the build date for the Rom is 2015-11-24 just over a week ago. the Rom is based on Android 6.0 making the Trunk one of the first phones from China to run the latest Marshmallow OS.
It will be interesting trying out this version of the OS and getting to see how well the Trunk runs Cyanogenmod 13 seeing what works and what bugs there are to iron out.
As the Trunk is running a Qualcomm CPU and has identical hardware to the ARK Benefit A3 that it is getting a fair amount of attention from Russian devs, we should start to see a lot more Roms soon.
The second Rom is an update to the previous version of the Meizu Flyme rom, this new Rom version is 4.5.4 the build date is 2015-12-01 and the Rom is based on Android 5.1
Changelog:
System
Fixed the occasional rebooting bug;
Phone
Fixed the occasional bug of the Phone app being shut down abnormally;
Fixed the program crash when tap ‘Add to marked’ in detail page of call log;
Messages
Fixed the occasional failure in syncing Messages;
Fixed the problem in which the message reply icon is useless when receiving an incoming call;
Wi-Fi
Fixed the slow response problem occurred in the system after disable WPS;
Email
Fixed the problem of unable to login to vanke email account;
Third-party apps
Fixed the crash bug when input and long press text in Jota+ app;
Fixed the bug of the phone being unable to upload videos to Instagram.
They have not mentioned the fingerprint scanner, this was not working in the previous version and I would assume that it is still not working in this one.
If you fancy trying out Updates & Custom Roms for Elephone Trunk & P8000, the Elephone P8000 can be purchased here for $169.99 (£111) whilst he Elephone Trunk can currently be purchased for $109.99 (£73)
Do you own one of these phones? have you tried flashing the custom roms on your handset? how has your experience been so far? let me know what you think in the comments section below.
Just when we are busy talking about the Snapdragon 820 which was officially unveiled early November, rumors and specs of its next generation version have already started making rounds on the internet. According to Pan Jiutang, an analyst from China, Snapdragon 830 could support up to 8GB of RAM memory.
This shouldn’t come as a surprise. The current generation Snapdragon 820 supports up to 6GB of RAM. While we are yet to see a smartphone with such memory from a notable brand, there are rumors that at least of a couple of smartphones with 6GB RAM may hit the markets next year. For example, a few weeks back, we heard that the next generation version of LeTV Max 2 model could come with Snapdragon 820 and 6GB RAM. However, the company is yet to confirm these specs.
So, support for 8GB RAM won’t be surprising on a chip that’s going to debut in 2017. We are already seeing apps and games that require such amount of memory and in a couple of years, the demand for more power could lead to 8GB RAM powered smartphones. Moreover, it is rumored that Snapdragon 830 will be manufactured using the 10nm node. Again it’s possible since the current generation Snapdragon 820 uses the efficient 14nm process.
These specs would make the chip ideal for flagships. It is said that Samsung’s Galaxy S8 could be one of the first phones powered by 830. But we will have to wait and watch if it turns out to be true since Xiaomi’s Mi 5 could be one of the first phones to debut Snapdragon 820 next year. So, it could follow suit in 2017 as well.
However, it’s too early to confirm anything, so let’s wait for some more concrete details before getting too excited.
In this competitive world, R&D forms the backbone of any tech company. In order to stay ahead of the competition, companies have to incorporate cutting edge technology in their products in order to differentiate them from the masses.
We know that major tech companies spend billions of dollars every year on R&D and today, we have some idea about what each of the top tech companies spends in this department.
According to a recent report from Bloomberg Businessweek, Apple spends just about 3.5% of its revenue on R&D which is a pretty small figure as compared to other tech companies. For example, Google spends about 15% of its revenue in this department, while Facebook and Qualcomm spend around 22% and 21% respectively.
When it comes to Chinese tech giant, Huawei, it’s around the same figure as Google. The company reportedly spends around 14.2% of its revenue in R&D.
However, this is the percentage of revenue spent. When it comes to the total amount spent, Apple, even with its meagre 3.5% manages to spend about $8.15 billion in R&D, greater than Huawei, Facebook or Qualcomm.
In terms of total amount of money spent, Huawei spends around $6.5 billion in this department. This is greater than both Facebook and Qualcomm’s figures of $2.6 and $5.56 billion respectively. In comparison, Google spends about $9.9 billion.
Huawei’s CEO Yu Chengdong had said that the company’s smartphones will surpass Samsung next year and if that has to happen, the company will need to spend a lot of R&D this year. So, this figure could increase significantly in 2015.
So, do you think Huawei can surpass Samsung in the next couple of years?
Elephone have today published the Elephone Ivory product page, you can now find full details and specifications online.
Coming in at just $99.99 (£66), the Elephone Ivory could turn out to be a real bargain, featuring an Octa-core Mediatek MT6753 CPU clocked at 1.3GHz and an ARM Mali-T720 GPU, the phone should be easily able to push pixels around the Ivory’s 5″ 720p screen.
Elephone have given the Ivory 2GB of Ram and 16GB of ROM, for those of you that want more storage the Elephone Ivory also has support for up to 128GB Micro SD cards.
Elephone have chosen to go with a 13MP rear facing camera (hopefully this will not be an interpolated 8mp sensor) and a 2mp front facing selfie camera.
What could be one of the phones most impressive features upon release, is not a hardware based feature at all.
The Elephone Ivory will be one of the first China phones to come with Android 6.0 Marshmallow out of the box, it will be interesting to see how Elephone get on with optimising the new OS for the phone.
Network support has been confirmed
FDD-LTE:band 1/3/7/20 (2100/1800/2600/800)
WCDMA:band 1/8 (2100/900)
GSM: band 3/5/8 (1800/850/900)
Networks B (coming soon)
FDD-LTE:band 2/4/7/17 (1900/1700/2600/700)
WCDMA:band 1/2/4/5 (2100/1900/1700/850)
GSM:band 2/5/8 (850/900/1900)
Be sure to check out the Elephone Ivory product page and leave comments and questions below, pre order should be available some time around the middle of this month, hopefully making it available to give as a Christmas gift to your family or friends.
Recently, ZTE Nubia Manager, Ni Fei had confirmed to the South China Morning Post that its upcoming ZTE Nubia Z11 flagship will launch simultaneously in China and US. The company has shown interest in the US market and has been doing well thanks to its recently launched ZTE Axon Pro flagship.
While officially, this is all that Ni Fei revealed, other sources have given out a few more details about the Nubia Z11. First of all, the phone will be powered by the latest Snapdragon 820 quad-core chip. Secondly, it is said to be released by Q1 2016, which is around the same time as Xiaomi is expected to release the new Xiaomi Mi 5 flagship. However, since Ni Fei revealed that the phone will be simultaneously launched in US as well, the Z11 could have an advantage.
The company has sold about 5 million Nubia Z9 units till now. But that’s just in China. If the company manages to put in high-end specs at a great price, somewhat similar to the Axon, ZTE could have a winner here.
Other specs of the phone are also expected to be pretty high-end. The ZTE Nubia Z11 will reportedly come with 4GB of RAM, 128GB internal storage, 5.2-inch bezelless display with 2K resolution, 20.7MP rear camera, 13MP front shooter, and a fingerprint sensor on board. Pricing is one area where the Nubia series never had an edge, but let’s hope that changes with the Z11.
The device comes in a simple packaging and all you are getting is the keyboard itself, some documentation and a charging cable.
1byone Bluetooth Keyboard Review: DESIGN and FEATURES
When it comes to the design, the exterior of the 1byone Bluetooth keyboard is made of metal and it is very well constructed.
The key feature is that the keyboard is very compact and that’s because it easily unfolds into a laptop sized keyboard. As far as the unfolding mechanism, it doesn’t seem to break any time soon.
As far as the actual keyboard buttons, they have a good tactile feedback and the keys don’t feel cheap. However, the spaces between they keys are narrower than on the typical laptop keyboard but once you get used to them, they work great.
They keyboard works with lots of devices that have Bluetooth connectivity. I had no issues pairing it up and using with the iPad or Android smartphones.
One of the key features is the battery life, which is said to last up to 114 days on standby or 64 hours of continuous use. Well, I couldn’t test that but the keyboard didn’t die during my testing period.
1byone Bluetooth Keyboard Review: CONCLUSIONS
All in all, the 1byone Bluetooth keyboard looks good, works great and it is very compact when folded but it serves as a normal keyboard when unfolded.
The only shortcoming is that the keyboard didn’t re-connect to the iPad automatically a few times.
The price of $37 doesn’t make this device cheap but this solution is definitely worth checking out if you are in the market of compact Bluetooth keyboards.
For the first time in years, a Chinese smartphone maker, Huawei manufactured a Nexus smartphone in 2015.
Now, according to insider sources, Huawei is keen to start working on the Nexus 7 device. If Google chooses Huawei once again, then it will be the second consecutive time the company will make a Nexus device.
The source reveals that the 2016 Nexus 7 project has already begun. Although Huawei still wants to continue as the Nexus maker for the second consecutive year, it is said that Google is yet to confirm it. Also, we still don’t know whether this is the new Nexus 7 tablet or is it the Nexus 7 smartphone.
Since the Nexus 7 name has been used exclusively for the tablet lineup till now, the source could be hinting at a new tablet from the company. However, we are not quite sure of that at the moment, so its best to wait for some more concrete details in the coming months.
The company’s current Nexus model, the Huawei 6P, isn’t without complaints, but it’s still a great flagship Android phone. The company has designed the phone pretty well and has provided enough firepower under the hood to tackle all tasks. So, if Google continues with Huawei for another year, it won’t be surprising.
So, what do you think? Should Huawei continue as the Nexus maker for the second year? Or do you think any other company will be able to make better Nexus phones that Huawei?
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
